LG BCK1A, BCK1, BCK2A User Manual

MBM66226217

How to use

MBM67219209

Use unit once a day

Use bubble foam cleansing

Hypoallergenic deep cleansing

Micro-vibrating complex cleansing with ultrasonic wave and silicone brush gives you a neater cleansing effect that is like gentle twice washed away.

y Ultrasonic wave : Ultrasonic wave of 370,000* soft vibrations per

second, which can not be felt by the skin, is transferred to the micro dust and contaminants on the surface of the skin, helping to discharge them out of the skin without stimulation.

※ Ultrasonic frequency during cleansing* / Based on our own internal test results

y Silicone Brush: Up to 4,200* per minute micro vibrations with adjustable

in three steps can be delivered to the soft, low-irritation silicone brush, helping to clear the skin. Thin inside and thicker outward, the silicone bump is in the form of a spiraling Fibonacci pattern, enhancing detergency and minimizing skin irritation.

※ Measurement result with Level 3* / Based on our own internal test results

Wet your face or brush head of unit with tepid

Ultrasonic Cleanser

water.

Model name BCK1 BCK1A BCK2A

1905_Rev01

BCK1.DKORLLK_QSG_ENG_MBM67219209.indd 2-5 2019-05-14  10:01:30

www.lge.co.kr

Put cleansing product for your skin type on your face.

Making sufcient

amount of bubble before cleansing is recommended.

Press the button to turn on.

1(Power)

Press the LEVEL button and choose cleansing vibration speed and level.

Move the brush head and gently cleanse in the following order as you make a small circle. (Default setting: 70 seconds / Setting method : Refer

to back-page.)

70 seconds

cheek (10’s) Forehead (20’s) Power off

120 seconds

cheek (20’s) Forehead (30’s)

a Left cheek (10’s)

c Nose (20’s) d Chin (10’s) e

a Left cheek (20’s)

c Nose (30’s) d Chin (20’s) e

Power off

b Right

Rinse your face sufciently

with tepid water after cleansing.

Water-proof

This unit can be used safely even in the shower and cleaned under running water.

※ Water-proof effect can be weakened by natural wear of the unit.

Voice guidance

As voice guidance, guide how to care easily during use.

Precautions for use

y Recommend using the product once a day. Using more than

twice a day may make skin more sensitive.

y When using this device, depending on individual skin

condition, it may cause a variety of skin irritation. If such irritation persists, please reduce the number of use.

y Before using the device, if you are currently undergoing

dermatology related treatment or have skin problems, consult your dermatologist and then use it.

y In the following cases, it is recommended to use the

device after consultation with a specialist.

- Allergies skin, acne, dermatitis, skin treatment, cosmetic surgery or hair loss surgery

- Wearing a cardiac pacemakers, device implantation or a metal prosthetic device

y Pregnancy, menstruation, lactating women are not

recommended for use. (Unstable hormonal balance may cause temporary skin trouble.)

y Do not use the device for purposes other than those set

out in this guideline.

y As a facial treatments only, it is not recommended to use

for a body.

y Do not use the device above your eyes. It might not be

good for your eye health.

How to hold the device

Speaker

Please hold the unit naturally without blocking speaker as shown image.

How to cleanse the face curve

Edge of silicone

brush head

Please cleanse face curve such as corner of nose and between eyebrows with edge of silicone brush head.

Change cleansing time

With power off, press and hold the 1(power) button until the guide.(Approx. 5 seconds) (70 seconds  120 seconds)

Set voice guide function

With power on, press and hold the LEVEL button for approx 5 seconds each time you change function. (Voice guide

guide Turn off guide(mute))

Sound effect

Language Setting

With power on, press and hold the 1(power) button and LEVEL button for approx 3 seconds each time you change function. (Korean

Chinese

)

English

Charge

LEVEL light

Battery status

Charging contact point

Charging Adapter (Not supplied)

When charging, place this device on the charging contact

point of the charging stand. Battery status light is on.

light

How to check ultrasonic wave

Turn on the unit, after drop a water on ultrasonic wave

head part prior use. You can see ner water splashing

before enter cleansing mode.

If turn off voice guide, you can not check it. Refer to

“Set voice guide function” to turn on voice guide.

BCK1.DKORLLK_QSG_ENG_MBM67219209.indd 6-10 2019-05-14  10:01:32