LG AUUW36GC0, ABUW60LM3S1, AUUW18GC0, ABUW48LM3S1, ABUW36GM2S1 User Manual

...

Download

OWNER’S MANUAL

AIR CONDITIONER

ENGLISH ESPAÑOL

PORTUGUÊS

Please read this manual carefully before operating your set and retain it for future reference.

Ceiling Concealed Duct

MFL67870415

Rev.00_070418

www.lg.com

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

This air conditioner is not designed to be used by children without supervision.

• Children should be supervised to ensure that they do not play with the appliance.

• If the power cord is damaged, it must be replaced with a good cable by the manufacturer or its authorized service agent.

• Installation tasks must be carried out in accordance with the National Electrical Code and only can be carried out by qualified and authorized personnel.

WARNING: Before connecting electrical terminals, all power circuits, they must not have electrical power. WARNING: Disconnecting means must be installed to the fixed installation in accordance with the installation rules. WARNING: This appliance is not intended to be accessible to the general public. WARNING: The appliance must be installed in accordance with local regulations.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING

It can result in serious injury or death when the directions are ignored.

CAUTION

It can result in minor injury or product damage when the directions are ignored.

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• The product shall be installed according to the Wiring regulations of the corresponding

country.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment

malfunction, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service

Center. Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or

electric shock

• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.

• Do not modify or extend the power cable. There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric

shock, explosion, or injury.

• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be

especially careful of the case edges and the fins on the condenser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center. There is risk of

fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. It may cause injury, accident, or

damage to the product.

• Be sure the installation area does not deteriorate with age. If the base collapses, the air

conditioner could fall with it, causing property damage, product failure, and personal injury.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or

a window is left open. Moisture may condense and wet or damage furniture.

ENGLISH

Operation

• Take care to ensure that power cable could not be pulled out or damaged during operation.

• Do not place anything on the power cable. There is risk of fire or electric shock.

•

• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable. There is risk of fire and

• Do not allow water to run into electric parts. It may cause There is risk of fire, failure of the

• Do not store or use flammable gas or combustibles near the product. There is risk of fire or

•

• If strange sounds, or smell or smoke comes from product. Turn the breaker off or disconnect

• Stop operation and close the window in storm or hurricane. If possible, remove the product

• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,

• When the product is soaked (flooded orsubmerged), contact an Authorized Service Center.

• Be cautious that water could not enter the product. There is risk of fire, electric shock, or

• Ventilate the product from time to time when operating it together with a stove, etc. There is

•

• When the product is not be used for a long time, disconnect the power supply plug or turn off

• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result

IMPORTANT SAFETY INSTRUCTIONS

There is risk of fire or electric shock.

Do not plug or unplug the power supply plug during operation. There is risk of fire or electric shock.

electric shock.

product, or electric shock.

failure of product. Do not use the product in a tightly closed space for a long time. Oxygen deficiency could occur. When flammable gas leaks, turn off the gas and open a window for ventilation before turn the

product on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

the power supply cable. There is risk of electric shock or fire.

from the window before the hurricane arrives. There is risk of property damage, failure of product, or electric shock.

if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

There is risk of fire or electric shock.

product damage.

risk of fire or electric shock. Turn the main power off when cleaning or maintaining the product. There is risk of electric shock.

the breaker. There is risk of product damage or failure, or unintended operation.

in personal injury and product damage.

CAUTION

Installation

• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant

levels may cause failure of product.

• Install the drain hose to ensure that water is drained away properly. A bad connection may cause

water leakage.

• Keep level even when installing the product. To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the

neighborhoods. It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause

corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

IMPORTANT SAFETY INSTRUCTIONS

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could

harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a

consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric

shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There

is risk of personal injury.

• Do not step on or put anything on the product. (outdoor units) There is risk of personal injury and

failure of product.

• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty

filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

There are sharp and moving parts that could cause personal injury.

• Do not drink the water drained from the product. It is not sanitary and could cause serious health

issues.

• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal

injury.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries. There is risk of fire or explosion.

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or

explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

• The user must carry out checks and cleaning of routine to avoid defective performance.

- In a special situation, only service personnel can carry out repair work.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

ENGLISH

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

2 TIPS FOR SAVING ENERGY

3 IMPORTANT SAFETY INSTRUCTIONS

7 BEFORE USE

7 Preparing for operation

7 Usage

7 Cleaning and maintenance

7 Service

8 PRODUCT INTRODUCTION

8 Name and function of parts

9 Wired Remote Controller

10 OPERATING INSTRUCTIONS

10 Standard Operation - Standard Cooling

11 Standard Operation - Heating Mode

12 Standard Operation - Dehumidiﬁcation Mode

13 Standard Operation - Auto Operation Mode

14 Standard Operation - Fan Mode

15 Function Setting - Fan Speed Selection

16 Standard Operation - Temperature Setting/Room Temperature Check

17 Function setting - Child Lock

18 MAINTENANCE AND SERVICE

19 When the air conditioner is not going to be used for a long time.

19 Operation Tips!

20 Troubleshooting Tips! Save time and money!

BEFORE USE

Preparing for operation

- Contact an installation specialist for installation.

- Use a dedicated circuit.

Usage

- Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

- Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.

- Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

- Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.

- Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.

- When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.

ENGLISH

Service

For repair and maintenance, contact your authorized service dealer.

PRODUCT INTRODUCTION

Air outlet vents

ENGLISH

PRODUCT INTRODUCTION

Name and function of parts

Air inlet vents

Air outlet

Air outlet vents

vents

Air outlet

vents

Remote Controller

Air intake vents

Remote Controller

1 Indoor unit 2 Outdoor unit 3 Remote controller 4 Inlet air 5 Discharge air 6 Refrigerant piping, connection electric wire 7 Drain pipe 8 Ground wire

wire to ground outdoor unit to prevent electrical shocks.

Wired Remote Controller

FAN

SPEED

TEMP

OPER MODE

PRODUCT INTRODUCTION

1 Operation Display Panel

2 Temperature Control Button

3 Fan Speed Button

4 On/Off Button

5 Operation Mode select Button

ENGLISH

* Some functions may not be operated and displayed depending on the product type.

NOTE

- Display temperature can be different from actual room temperature if the remote controller is installed at the place where sun-rays are falling directly or the place nearby heat source.

- The actual product can be different from above contents depending upon model type.

- When using simultaneous operation system, whenever press remote controller button, system will approximately operate after 1~2 minutes.

OPERATING INSTRUCTIONS

ENGLISH

OPERATING INSTRUCTIONS

Standard Operation - Standard Cooling

It cools the room by comfortable and clean wind.

FA N

SPEED

TEMP

OPER MODE

Cooling operation will begin if you press

the button.

Press the temperature button and set the

desired room temperature lower than the current room temperature.

A click of the button will increase the desired temperature by 1 °C or 2 °F.

TEMP

A click of the button will decrease the desired temperature by 1 °C or 2 °F.

Setting temp range : 18 °C~30 °C (64 °F~86 °F)

- If the desired temperature is set higher than the current room temperature, the cooling function will not begin and just the blowing operation will continue.

If you Press the mode button during the

operation, the operation mode will be changed in the order of cooling, dry(dehumidiﬁcation),heating,auto-operation and fan operation. If the product is a cooling-only model, the operation mode will be changed in the order of cooling, dry(dehumidiﬁcation), auto-operation and fan operation.

If you press the button, the cooling

operation will stop.

Standard Operation - Heating Mode

TEMP

FAN

SPEED

OPER MODE

Press button to turn on the indoor.

Adjust the desired temperature by pressing buttons. When setting the desired temperature lower than room temperature, there is only ventilation wind.

Press button to select Heating mode. (To check the indoor temperature, press the room temperature button.)

OPER MODE

It supplies warm wind to the indoor.

OPERATING INSTRUCTIONS

ENGLISH

- Heating drive only operates at the cooling and heating model.

- Heating doesn't operate at cooling exclusive model.

OPERATING INSTRUCTIONS

ENGLISH

Standard Operation - Dehumidiﬁcation Mode

It removes humidity while air-cooling weakly.

FAN

SPEED

TEMP

OPER

MODE

After operating the product by pressing the button, set up the dry (Dehumidiﬁcation) by pressing the button.

When the dry operation is selected, “dh” will be shown on the display window as shown on the left side.

- The temperature setting can not be adjusted during operation this mode.

FAN

Press the button to select airﬂow rate [LO→MED→HI].

- The initial wind powerfulness of humidity

removal drive is ‘weak’.

SPEED

OPER MODE

- In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively.

- The menu item of wind powerfulness might not be partially selected according to the product.

OPERATING INSTRUCTIONS

Standard Operation - Auto Operation Mode

After operating the product by pressing

the button, set up the auto operation by pressing the button.

“Auto Change Over Mode” – Heat pump model only

When desired the set temperature is higher than the room temperature during the auto operation => Heating operation [For Heat pump models only]

When desired the set temperature is lower than the room temperature during the auto operation

TEMP

FA N

SPEED

OPER MODE

=> Cooling operation

- Setting temp range : 18 °C~30 °C (64 °F~86 °F)

“Auto Operation Mode”

For the products with the exclusive purpose of cooling only, “AI” is indicated at the temperature display section.

OPER MODE

ENGLISH

When cold When cool When appropriate When warm When hot

OPERATING INSTRUCTIONS

ENGLISH

Standard Operation - Fan Mode

It blows the air as it is in the indoor, not the cold wind.

FA N

SPEED

TEMP

OPER MODE

After operating the product by pressing

the button, set up the fan operation by pressing the button.

When the dry operation is selected, “Fn” will

be shown on the display window as shown on the left side.

- The temperature setting can not be adjusted during operation this mode.

Press the button to select airﬂow rate

[LO→MED→HI]. When running ventilation, compressor of AHU doesn’t work.

FAN

SPEED

OPER MODE

- Ventilation drive does not release cool wind but general fan

- Because it releases the wind that has no temperature difference from the room, it functions to circulate the inside air.

- The menu item of wind powerfulness might not be partially selected according to the product.

Function Setting - Fan Speed Selection

It blows the air as it is in the indoor, not the cold wind.

Select the proper fan speed which you want

by pressing the button on the remote controller.

- If you press the button, the fan speed

will change in the order of [LO→MED→HI].

- The initial fan speed is “Hi”.

- If the product is not compatible with the fan speed control, it will not function as per your selection.

Fan Speed Selection in Cooling Operation

FA N

SPEED

TEMP

OPER MODE

OPERATING INSTRUCTIONS

FAN

SPEED

FAN

SPEED

ENGLISH

Fan Speed Selection in Heating, Dry, Fan, Auto-Operation

OPERATING INSTRUCTIONS

ENGLISH

Standard Operation - Temperature Setting/Room Temperature Check

Temperature Setting

We can simply adjust the desired

temperature.

• Press the buttons to adjust the desired temperature.

: Increase 1 ˚C or 2 ˚F per one time pressing : Decrease 1 ˚C or 2 ˚F per one time pressing

- Room temp : Indicate the current room temperature.

- Set temp : Indicate the temperature that user want to set.

* Depend on what kind of controller, the

desired temperature can be adjusted at 0.5 ˚C or 1 ˚F.

Cooling operation:

- The cooling mode doesn't work if desired temperature is higher than room temperature. Please lower the desired temperature.

TEMP

FA N

SPEED

OPER

MODE

Room Temperature Check

When prssing the button of the remote

controller adjustment section for approx. 3 seconds, the room temperature will be indicated for about 5 seconds before resuming to the previous display panel.

In the case of the room temperature display, the room temperature can be different in accordance with the setting of the remote controller’s room temperature detection selection.

- For air-cooling drive, from 18 °C to 30 °C, and for heating drive, from 16 °C to 30 °C, you can select desired temperature.

- 5 °C is proper for the difference between room and outside temperature.

FAN

SPEED

OPERATING INSTRUCTIONS

TEMP

FA N

SPEED

OPER MODE

During the operation, when pressing the button and button for approx. 3 seconds, the ‘Child Lock’ function can be used.

At the time of initial setting of the ‘Child Lock’, the ‘CL’ will be indicated approx. 3 seconds at the temperature display section before resuming to the previous mode. After the setting of the ‘CL’, if another button is setup, the button can not be recognized as the ‘CL’ is indicated at the temperature display section for approx. 3 seconds.

If the ‘CL’ function is wanted to be used under the operation standby state, press the button and button for approx. 3 seconds under the standby mode state and the system will be the ‘CL’ state.

As for the releasing method, when pressing the Button and button for approx. 3 seconds, the ‘CL’ function can be released.

FAN

SPEED

FAN

SPEED

FAN

SPEED

Function setting - Child Lock

It is the function to use preventing children or others from careless using.

ENGLISH

MAINTENANCE AND SERVICE

Air ﬁlters

Air outlet vents

Air ﬁlters

Air outlet vents

Air outlet vent

Air filters

Air outlet vent

ENGLISH

MAINTENANCE AND SERVICE

CAUTION

Before performing any maintenance, turn off the main power to the system.

Grille, Case and Remote Control

- Turn the system off before cleanining. To

clean, wipe with a soft, dry cloth. Do not use bleach or abrasives.

NOTE

- Power supply must be disconnected before cleaning the indoor unit.

Air Filters

The air filters behind the air inlet vent should be checked and cleaned once every 2 weeks or more often if neccessary.

- Remove the air filters.

Take hold of the tab and pull slightly forward to remove the filter.

CAUTION

When the air filter is to be removed, do not touch the metal parts of the indoor unit. It may cause an injury.

- Never use any of the followings: Water hotter than 40 °C.

Could cause deformation and or discoloration.

Volatile substances. Could damage the surfaces of the air conditioner.

- Clean dirt from the air filter using a vacuum

cleaner or washing with water.

If dirt is conspicuous, wash with a neutral detergent in lukewarm water.

If hot water (40 °C or more) is used, it may be deformed.

- After washing with water, dry well in the

shade.

Do not expose the air filter to direct sunlight or heat from a fire when drying it.

- Install the air filter.

MAINTENANCE AND SERVICE

ENGLISH

When the air conditioner is not going to be used for a long time.

When it is not going to be used for a long time.

- Operate the air conditioner at the following

settings for 2 to 3 hours.

Type of operation: Fan operation mode. This will dry out the internal mechanisms.

- Turn off the breaker.

CAUTION

Turn off the breaker when the air conditioner is not going to be used for a long time. Dirt may collect and may cause a fire.

Operation Tips!

Do not overcool the room. This is not good for the health

and wastes electricity.

Make sure that the doors and windows are shut tight.

Avoid opening doors and windows as much as possible to keep the cool air in the room.

Keep blinds or curtains closed. Do not let direct sunshine

enter the room when the air conditioner is in operation.

Clean the air filter regularly. Blockages in the air filter

reduce the airflow and lower cooling and dehumidifying effects. Clean at least once every two weeks.

Helpful information

The air filters and your electiric bill. If the air filters become clogged with dust, the

cooling capacity will drop, and 6 % of the electricity used to operate the air conditioner will be wasted.

When the air conditioner is to be used again.

- Clean the air filter and install it in the indoor

unit.

- Check that the air inlet and outlet of the

indoor/outdoor unit are not blocked.

- Check that the ground wire is connected

correctly. It may be connect to the indoor unit side.

Keep the room temperature uniform.

Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room.

Ventilate the room occasionally.

Since windows are kept closed, it is a good idea to open them and ventilate the room now and then.

MAINTENANCE AND SERVICE

ENGLISH

Troubleshooting Tips! Save time and money!

Check the following points before requesting repairs or service.... If the malfunction persist,

please contact your dealer.

The air conditioner does not operate.

- Have you made a

mistake in timer operation?

- Has the fuse blown

or has the circuit breaker been tripped?

Does not cool or heat effectively.

- Is the air filter dirty?

See air filter cleaning instructions.

- The room may have

been very hot when the room air conditioner was first turned on. Allow time for it to cool down.

- Has the temperature

been set incorrectly?

- Are the indoor unit's

air inlet or outlet vents obstructed?

The room has a peculiar odor.

- Check that this is not a damp smell exuded by the walls, carpet, furniture or cloth items in the room.

The air conditioner operation is noisy.

- For a noise that sounds like water flowing.

* This is the sound

of freon flowing inside the air conditioner unit.

- For a noise that sounds like the compressed air releasing into atmosphere.

This is the sound of the dehumidifying water being processed inside the air conditioning unit.

It seems that condensation is leaking from the air conditioner.

- Condensation occurs when the airflow from the air conditioner cools the warm room air.

Crack sound is heard.

- This sound is generated by the expansion/ constriction of the front panel, etc. due to changes of temperature.

Air conditioner does not operate for about 3 minutes when restart.

- This is the protector of the mechanism.

- Wait about three minutes and operation will begin.

Remote control display is faint, or no display at all.

- Are the batteries depleted?

- Are the batteries inserted in the opposite (+) and (-) directions?

NOTE

WATER RESISTANT : The outdoor side of this appliance is WATER RESISTANT.

The indoor side is not water resistant and should not be exposed to excess water.

Speciﬁcations.

Model Voltage / Hz Max. Current

ABNW18GM1S1 220-240 V~ 50 Hz 1.6 A

ABNW24GM1S1 220-240 V~ 50 Hz 1.6 A

ABNW36GM2S1 220-240 V~ 50 Hz 2.3 A

ABNW48LM3S1 220-240 V~ 50 Hz 2.3 A

ABNW60LM3S1 220-240 V~ 50 Hz 2.4 A

ABUW18GM1S1 220-240 V~ 50 Hz 11.0 A

ABUW24GM1S1 220-240 V~ 50 Hz 18.0 A

ABUW36GM2S1 220-240 V~ 50 Hz 17.0 A

ABUW48LM3S1 380-415 V 3N~ 50 Hz 12.0 A

ABUW60LM3S1 380-415 V 3N~ 50 Hz 12.0 A

※ NOM applies to the following products.

Model Voltage / Hz Max. Current

ABNW18GBHC0 220 V~ 60 Hz 0.8 A

ABNW24GBHC0 220 V~ 60 Hz 1.1 A

ABNW36GM2A0 220 V~ 60 Hz 2.3 A

AUUW18GC0 220 V~ 60 Hz 10.5 A

AUUW24GC0 220 V~ 60 Hz 13.0 A

AUUW36GC0 220 V~ 60 Hz 17.0 A

MAINTENANCE AND SERVICE

ENGLISH

Model / Modelo (s) : ABNW18GBHC0, AUUW18GC0 ABNW24GBHC0, AUUW24GC0 ABNW36GM2A0, AUUW36GC0 AB-W18GM1S1, AB-W24GM1S1 AB-W36GM2S1, AB-W48LM3S1 AB-W60LM3S1

LG Electronics México, S.A. de C.V Sor Juana lnés de la Cruz No. 555 Col. San Lorenzo Industrial Tlalnepantla de Baz, Estado de México C.P. 54033 Tel. 5 5 5321 1919 Página web http://www.lg.com.mx

※ This mark applies to the following products. ※ Esta marca se aplica a los siguientes productos.

ABNW18GBHC0, AUUW18GC0 ABNW24GBHC0, AUUW24GC0 ABNW36GM2A0, AUUW36GC0

LG AUUW36GC0, ABUW60LM3S1, AUUW18GC0, ABUW48LM3S1, ABUW36GM2S1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual