LG ATNQ60GMLA4, ATNQ30GPLA4 Owner’s Manual

OWNER’S MANUAL

AIR CONDITIONER

ENGLISH

ESPAÑOL

Please read this manual carefully before operating your set and retain it for future reference.

CEILING CASSETTE

P/NO.: MFL70503205

REV.00_190413

www.lg.com

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING

It can result in serious injury or death when the directions are ignored.

CAUTION

It can result in minor injury or product damage when the directions are ignored.

WARNING

• Always ground the product.

- There is a risk of electric shock.

• Do not use a defective or underrated circuit breaker.

- Use the correctly rated breaker and fuse. There is risk of fire or electric shock.

• Do not use a multi consent. Always use this appliance on a dedicated cicuit and breaker.

- Otherwise it can cause electric shock or fire.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. Do not disassemble or repair the product by yourself.

- There is risk of fire or electric shock.

• Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water pipes lightening rod or telephone ground wire.

- There is risk of fire or electric shock.

• Install the panel and the cover of control box securely.

- There is risk of fire or electric shock due to dust, water etc.

• Use the correctly rated breaker or fuse.

- There is risk of fire or electric shock.

• Do not modify or extend the power cable. If the power cable or cord has scrathes or skin peeled off or deteriorated then it must be replaced.

- There is risk of fire or electric shock.

• For installation, removal or reinstall, always contact the dealer or an Authorized Service Center.

- There is risk of fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. Be sure that the installation area does not deteriorate with age.

- It may cause product to fall.

• Never install the outdoor unit on a moving base or a place from where it can fall down.

- The falling outdoor unit can cause damage or injury or even death of a person.

• When the product is soaked (flooded or submerged) in water, contact an Authorized Service Center for repair before using it again.

- There is risk of fire or eletric shock.

• Be sure to check the refrigerant to the used. Please read the label on the product.

- Incorrect refrigerant used can prevent the normal operation of the unit.

• Don't use a power cable, a plug or a loose socket which is damaged.

- Otherwise it may cause a fire or electrical shock.

• Do not touch, operate, or repair the product with wet hands. Hold the plug by hand when taking out.

- There is risk of electric shock or fire.

• Do not place a heater or other heating appliances near the power cable.

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts. Install the unit away from water sources.

- There is risk of fire, failure of the product, or electric shock.

• Do not store or use or even allow flammable gas or combustibles near the product.

- There is risk of fire.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that

there is no force pulling the cable from the connection terminals.

- Improper or loose connections can cause heat generation or ﬁre.

• Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or

svc and then tear away and thraw away the plastic packaging bags.

- Children may play with them and cause injury.

• Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug

completely.

- Dirty, loose or broken power plug can cause electric shock or ﬁre.

• In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be sure

to discharge the capacitor completely before conducting the repair work.

- An charged capacitor can cause electrical shock.

• When installing the unit, use the installation kit provided with the product.

- Otherwise the unit may fall and cause severe injury.

• Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the

equipment.

- The use of inappropriate parts can cause an electrical shock, excessive heat generation or ﬁre.

• Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.

- Oxygen deﬁciency could occur and hence harm your health.

• Do not open the front grille of the product during operation. (Do not touch the electrostatic ﬁlter, if the unit

is so equipped.)

- There is risk of physical injury, electric shock, or product failure.

• If strange sounds, smell or smoke comes from product. Immediately turn the breaker off or disconnect

the power supply cable.

- There is risk of electric shock or ﬁre.

• Ventilate the product room from time to time when operating it together with a stove, or heating element

etc.

- Oxygen deﬁciency can occur and hence harm your health.

• Turn the main power off and unplug the unit when cleaning or repairing the product. There is risk of

electric shock.

• When the product is not to be used for a long time, disconnect the power supply plug or turn off the

breaker.

- There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit.

- This could result in personal injury and product damage.

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of ﬁre or electric shock.

• Do not place ANYTHING on the power cable.

- There is risk of ﬁre or electric shock.

• Do not plug or unplug the power supply plug to turn the unit ON/OFF.

- There is risk of ﬁre or electric shock.

• When ﬂammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.

Do not use the telephone or turn switches on or off.

- There is risk of explosion or ﬁre.

• The product shall be installed according to the Wiring regulations of the corresponding country.

CAUTION

• Two or more people must lift and transport the product.

- Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly.

- It may cause corrosion on the product.

• Install the drain hose to ensure that the condensed water is drained away properly.

- A bad connection may cause water leakage.

• Keep level even when installing the product.

- To avoid vibration or noise.

IMPORTANT SAFETY INSTRUCTIONS

• Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods.

- It may cause a problem for your neighbors and hence dispute.

• Always check for gas (refrigerant) leakage after installation or repair of product.

- Low refrigerant levels may cause failure of product.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

- There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow.

- It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc.

- There is risk of fire, electric shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter.

- There is risk of personal injury.

• Do not step on or put anyting on the product. (outdoor units)

- There is risk of personal injury and failure of product.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary.

- A dirty filter reduces the efficiency.

• Do not insert hands or other objects through the air inlet or outlet while the product is operating.

- There are sharp and moving parts that could cause personal injury.

• Be cautious when unpacking and installing the product.

- Sharp edges could cause injury.

• If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas.

- The refrigernat gas can cause frostbite (cold burn)

• Do not tilt the unit when removing or uninstalling it.

- The condensed water inside can spill.

• Do not mix air or gas other than the specified refrigerant used in the system.

- If air enters the refrigerant system, an excessively high pressure results, causing equipment damage or

injury.

• If the refrigerant gas leaks during the installation, ventilate the area immediately.

- Otherwise it can be harmfull for your health.

• Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance with local and national standards. Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.

- There is risk of fire or product failure.

• Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire.

- They may burn or explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.

- The chemicals in batteries could cause burns or other health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked.

- The chemicals in batteries could cause burns or other health hazard.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

- Moisture may condense and wet or damage furniture.

• Do not expose your skin or kids or plants to the cool or hot air draft.

- This could harm to your health.

• Do not drink the water drained from the product.

- It is not sanitary and could cause serious health issues.

• Use a firm stool or ladder when cleaning, maintaining or repairing the product at an height.

- Be careful and avoid personal injury.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children be supervised to ensure that they do not play with the appliance.

ENGLISH

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

2 TIPS FOR SAVING

ENERGY

3 IMPORTANT SAFETY

INSTRUCTIONS

7 BEFORE USE

7 Preparing for operation

7 Usage

7 Cleaning and maintenance

7 Service

8 PRODUCT

INTRODUCTION

8 Name and function of parts

8 Operation Indication Lamps

9 Wireless Remote Controller

10 OPERATING

INSTRUCTION

10 How to insert the Batteries

10 Wireless Remote Controller

Maintenance

10 Operating Method

11 OWNER'S

INSTRUCTION

11 Cooling Mode - Standard Operation

11 Cooling Mode - Power Cooling

12 Heating Mode

13 Dehumidiﬁcation Mode

14 Fan Mode

15 Auto Operation Mode

16 Auto Changeover Mode

17 Auto Changeover Mode - Setting the

Mode Change Temperature

18 Airﬂow Setting

19 Temperature Setting/Room

Temperature checking

20 SUB FUNCTION

20 Plasma Puriﬁcation(Optional)

20 Auto Clean (Optional)

21 Smart Clean (Optional)

22 LCD Luminosity Control (Optional)

22 Celsius/Fahrenheit Switching

22 Electric heater (Optional)

23 Individual vane angle control (Optional)

24 TIMER

24 Setting the Current Time

24 Sleep Timer Setting

24 On Timer Setting

25 Off Timer Setting

25 To cancel the Timer Setting

26 MAINTENANCE AND

SERVICE

26 Indoor Unit

27 Purifying ﬁlter(Optional)

28 Operation Tips!

28 When the air conditioner is not

going....

29 Troubleshooting Tips! Save time and

money!

29 Call the service immediately in the

following situations

BEFORE USE

Preparing for operation

• Contact an installation specialist for installation.

• Use a dedicated circuit.

Usage

• Being exposed to direct airflow for an extended period of time could be hazardous to your

health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves

or other heating devices.

• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision

devices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when

handling sharp metal edges.

• Do not use water to clean inside the air conditioner. Exposure to water can destroy the

insulation, leading to possible electric shock.

• When cleaning the unit, first make sure that the power and breaker are turned off. The fan

rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.

ENGLISH

Service

For repair and maintenance, contact your authorized service dealer.

PRODUCT INTRODUCTION

ENGLISH

PRODUCT INTRODUCTION

Name and function of parts

1 Indoor unit 2 Outdoor unit 3 Remote controller 4 Inlet air 5 Discharge air 6 Refrigerant piping, connection electric wire 7 Drain pipe 8 Ground wire

Wire to ground outdoor unit to prevent electrical shocks.

Wireless Remote Controller

5 6

7 8

Operation Mode

Cooling Mode

Auto Mode or Auto Changeover

Dehumidiﬁcation mode

Heating Mode

Fan Mode

• Cooling Model( ), Heat Pump Model( )

15 16

PRODUCT INTRODUCTION

VANE ANGLE Button

Used to set each vane angle. FUNCTION SETTING Button

Used to set or clear Auto Clean, Smart Clean, Electric heater or Individual vane angle control.

ON/OFF Button

Used to turn on/off the unit. JET COOL Button

Speed cooling operates super high fan speed.

LEFT/RIGHT AIRFLOW Button (OPTIONAL)

Used to set the desired left/right(horizontal) airflow direction.

UP/DOWN AIRFLOW Button

Used to stop or start louver movement and set the desired up/down airflow direction.

ON TIMER Button

Used to set the time of starting operation. SLEEP TIMER Button

Used to set the time of sleeping operation. SET / CLEAR Button

Used to set/clear the timer. Used to set the current time(if it input for 3 seconds.)

PLASMA Button (OPTIONAL)

Used to start or stop the plasmapurification function.

ROOM TEMPERATURE SETTING Button

Used to select the room temperature. OPERATION MODE SELECTION Button

Used to select the operation mode. INDOOR FAN SPEED SELECTION Button

Used to select fan speed in four steps low, medium, high and chaos.

ROOM TEMPERATURE CHECKING Button

Used to check the room temperature. OFF TIMER Button

Used to set the time of stopping operation. TIMER SETTING(Up/Down)/LIGHT Button

Used to set the timer. Used to adjust the brightness.(if it is not time adjust mode)

RESET Button

Used to reset the remote controller.

ENGLISH

OPERATING INSTRUCTION

ENGLISH

OPERATING INSTRUCTION

How to insert the Batteries

1 Remove the battery cover by pulling it

according to the arrow direction.

2 Insert new batteries making sure that the

(+) and (-) of battery are installed correctly.

3 Reattach the cover by sliding it back into

position.

NOTE

• Always use/replace both batteries of same type.

• If the system is not to be used for a long time, remove the batteries to save their working life.

• If the display screen of remote controller starts, fading replace both of the batteries.

Wireless Remote Controller Maintenance

1 Choose a suitable place where its safe &

easy to reach.

2 Fix the holder to wall etc with the supplied

screws firmly.

3 Slide the remote controller inside the

holder.

NOTE

• Remote controller should never be exposed to direct sunlight.

• Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them.

• In case some other appliances also get operated with remote control, change their position or consult your serviceman.

Operating Method

1 The signal receiver is inside the unit. 2 Aim the remote controller towards the unit

to operate it. There should not be any blockage in between.

OWNER'S INSTRUCTION

Cooling Mode - Standard Operation

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Cooling Mode.

OWNER'S INSTRUCTION

ENGLISH

Set the desired temperature by pressing TEMP button.

Press ROOM TEMPERATURE CHECKING button to check the room temperature. When setting the desired temperature is higher than room temperature, cooling wind isn’t blow out.

* Setting Temp. Range : 18~30 °C(64~86 °F)

Cooling Mode - Power Cooling

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Cooling Mode.

Press the JET COOL button. The unit will operate in super high fan speed in cooling mode.

* Wall mounted models operate power cooling mode

for 30 minutes.

To cancel the Power cooling Mode press the Jet Cool button or the fan button or the room temperature setting button again and the

unit will operate in high fan speed in cooling mode.

To raise the temperature

To lower the temperature

or or

OWNER'S INSTRUCTION

ENGLISH

Heating Mode

This Function is only for H/P model.

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Heating Mode.

Set the desired temperature by pressing TEMP button. Press ROOM TEMPERATURE CHECKING button to check the

room temperature. When setting the desired temperature is lower than room temperature, heating wind isn’t blow out.

To raise the temperature

To lower the temperature

* Setting Temp. Range in

Heating Mode : 16~30 °C (60 °F~86 °F)

Set the fan speed again. You can select the fan speed in four steps–low, medium, high, or chaos.

Each time the button is pressed, the fan speed mode is shifted.

Dehumidiﬁcation Mode

OWNER'S INSTRUCTION

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Dehumidification Mode.

Set the fan speed. You can select the fan speed in four steps - low, medium, high, or chaos. Each time the button is pressed, the fan speed mode is shifted.

ENGLISH

NOTE

During Dehumidification Mode

- If you select the dehumidification mode on the operation selection button, the indoor unit starts to run the dehumidification function, automatically setting the room temp. and air volume to the best condition for dehumidification based on the sensed room temp. In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control the room temp. either.

- During the healthy dehumidification function, the air volume is automatically set according to the algorithm responding to the current room temp. and makes the room condition healthy and comfortable even in the high humidity season.

ENGLISH

Fan Mode

OWNER'S INSTRUCTION

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Fan Mode.

Set the fan speed again. You can select the fan speed in four steps–low, medium, high, or

chaos. Each time the button is pressed, the fan speed mode is shifted.

NOTE

• Natural Wind by the chaos Logic For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to chaos mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the chaos logic.

• During Fan Mode The outdoor compressor doesn't work. Have a function to circulate the indoor as it sends out the air that doesn't have much temperature difference with indoor.

Auto Operation Mode

Code Feel 2 Cold 1 Slightly cool 0 Neutral

-1 Slightly warm

-2 Warm

* Please select the code depend on your feeling.

OWNER'S INSTRUCTION

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Auto Operation Mode.

Set the desired temperature.

<For Cooling Model> The temperature and fan speed are automatically set by the

electronic controls based on the actual room temperature. If you feel hot or cold, press TEMPERATURE SETTING buttons for more cooling or heating effect. You cannot switch the indoor fan speed. It has already been set by the Auto Operation Mode rule.

ENGLISH

To raise the temperature

To lower the temperature

You can set desired temperature and indoor fan speed. Setting Temp. Range : 18~30 °C(64~86 °F)

NOTE

During Auto Operation Mode

- If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired temperature again.

OWNER'S INSTRUCTION

ENGLISH

Auto Changeover Mode

Press the ON/OFF button. The unit will respond with beep sound.

Press MODE button to select Auto Changeover Mode.

Set the desired room temperature.

* Setting Temp. Range in Auto

Changeover Mode : 18~30 °C (64~86 °F)

You can select the fan speed in four steps low, medium, high and chaos. Each time the

button is pressed, the fan speed mode is shifted.

NOTE

During Auto changeover Mode The air conditioner changes the operation mode automatically to keep indoor temperature.

When room temperature vary over ±2 °C(4 °F) with respect to setting temperature, air conditioner keeps the room temperature within ±2 °C(4 °F) with respect to setting temperature by auto changeover mode.

To raise the temperature

To lower the temperature

OWNER'S INSTRUCTION

Auto Changeover Mode - Setting the Mode Change Temperature

This Function is to set the operating mode of the Auto Changeover Mode.

In Auto Changeover Mode, Press FUNCTION button to select

Setting the Mode Change Temperature.

Press the TEMPERATURE SETTING button to set desired Mode Change Temperature. (Default value is 2 °C(4 °F).)

To raise the temperature

* Mode Change Temp. Range :

To lower the temperature

1~7 °C(2~14 °F)

ENGLISH

NOTE

The Mode Change Temperature is the difference of temperature when from cooling mode to heating mode or from heating mode to cooling mode.

Ex) When setting temperature is 25 °C(76 °F) and room temperature is 20 °C(68 °F), then

operating mode is heating. If you set the mode change temperature to 2 °C(4 °F), when the room temperature up to 27 °C(25 °C + 2 °C)(80 °F(76 °F + 4 °F)), the unit start cooling operation.

OWNER'S INSTRUCTION

ENGLISH

Airﬂow Setting

Up/Down Airﬂow Direction Control (Optional)

The up/down airflow (Vertical Airflow) can be adjusted by using the remote controller.

1 Press the ON/OFF button to start the unit. 2 Press up/down airflow button and the louvers will swing up and down.

Press the up/down airflow button again to set the vertical louver at the desired airflow direction.

NOTE

• If you press the UP/DOWN AIRFLOW button, the horizontal airflow direction is changed

automatically based on the Auto Swing algorithm to distribute the air in the room evenly and at the same time to make the human body feel more comfortable, as if enjoying a natural breeze.

• Always use the remote controller to adjust the up/down airflow direction. Manually moving

the vertical airflow direction louver by hand, could damage the air conditioner.

• When the unit is shut off, the up/down airflow direction louver will close the air outlet vent

of the system.

+ 41 hidden pages