LG ARNU24GTTC2, ARNU12GTUC2 User Manual

Page 1
P/NO : MFL57199102
www.lg.com
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating your set and retain it for future reference.
TYPE : CEILING CASSETTE - 1WAY (ART TYPE)
ENGLISH
FRANCAIS DEUTSCH
ΕΛΛΗΝΙΚΆ
PORTUGUÊS
NEDERLANDS
кмллдавьбхд
Page 2
Ceiling Cassette - 1Way Type Indoor Unit Ownerʼs Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
n Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner.
You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for service at all.
PRECAUTION
Contact the authorized service technician for repair or maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young children or invalids without supervision.
• Young children should be supervised to ensure that they do not play with the air conditioner.
• When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts.
• Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only.
Safety Precautions.................3
Prior to Operation ..................7
Operating Instructions...........8
Maintenance and Service ....11
Before you Call for Service
............................................16
2 Indoor Unit
Page 3
To prevent injury to the user or other people and property damage, the following instructions must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
n Installation
Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
• There is risk of fire or electric shock.
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.
• Do not disassemble or repair the product. There is risk of fire or electric shock.
Always ground the product.
• There is risk of fire or electric shock.
Install the panel and the cover of control box securely.
• There is risk of fire or electric shock.
Always install a dedicated circuit and breaker.
• Improper wiring or installation may cause fire or electric shock
Use the correctly rated breaker or fuse.
• There is risk of fire or electric shock.
Do not modify or extend the power cable.
• There is risk of fire or electric shock.
Do not install, remove, or re-install the unit by yourself (customer).
• There is risk of fire, electric shock, explosion, or injury.
Be cautious when unpacking and installing the product.
• Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.
Ownerʼs Manual 3
Safety Precautions
ENGLISH
Safety Precautions
Page 4
Safety Precautions
4 Indoor Unit
Do not allow water to run into electric parts.
• It may cause There is risk of fire, failure of the product, or electric shock.
Do not store or use flammable gas or combustibles near the product.
• There is risk of fire or failure of product.
Do not use the product in a tightly closed space for a long time.
• Oxygen deficiency could occur.
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.
• Do not use the telephone or turn switches on or off. There is risk of explosion or fire
If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power supply cable.
• There is risk of electric shock or fire.
Stop operation and close the window in storm or hurricane. If possible, remove the product from the window before the hurricane arrives.
• There is risk of property damage, failure of product, or electric shock.
Do not open the inlet grill of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)
• There is risk of physical injury, electric shock, or product failure.
When the product is soaked (flooded or submerged), contact an Authorized Service Center.
• There is risk of fire or electric shock.
Be cautious that water could not enter the product.
• There is risk of fire, electric shock, or product damage.
n Operation
Do not plug or unplug the power supply plug during operation.
• There is risk of fire or electric shock.
Do not touch(operate) the product with wet hands.
• There is risk of fire or electrical shock.
Do not place a heater or other appliances near the power cable.
• There is risk of fire and electric shock.
Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open
.
• Moisture may condense and wet or damage furniture.
Take care to ensure that power cable could not be pulled out or damaged during operation.
• There is risk of fire or electric shock.
Do not place anything on the power cable.
• There is risk of fire or electric shock.
For installation, always contact the dealer or an Authorized Service Center.
• There is risk of fire, electric shock, explosion, or injury.
Do not install the product on a defective installation stand.
• It may cause injury, accident, or damage to the product.
Be sure the installation area does not deteriorate with age.
If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.
Page 5
Ventilate the product from time to time when operating it together with a stove, etc.
• There is risk of fire or electric shock.
Turn the main power off when cleaning or maintaining the product.
• There is risk of electric shock.
Safety Precautions
Ownerʼs Manual 5
ENGLISH
n Installation
CAUTION
n Operation
Always check for gas (refrigerant) leakage after installation or repair of product.
• Low refrigerant levels may cause failure of product.
Install the drain hose to ensure that water is drained away properly.
• A bad connection may cause water leakage.
Keep level even when installing the product.
• To avoid vibration or water leakage.
Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.
• It may cause a problem for your neighbors.
Use two or more people to lift and transport the product.
• Avoid personal injury.
Do not install the product where it will be exposed to sea wind (salt spray) directly.
It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation
.
When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.
• There is risk of product damage or failure, or unintended operation.
Take care to ensure that nobody could step on or fall onto the outdoor unit.
• This could result in personal injury and product damage.
Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.
• There is risk of damage or loss of property.
Do not block the inlet or outlet of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.
• There is risk of fire, electric shock, or damage to the plastic parts of the product.
Do not touch the metal parts of the product when removing the air filter. They are very sharp!
• There is risk of personal injury.
Page 6
Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.
• They may burn or explode.
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked.
The chemicals in batteries could cause burns or other health hazards.
If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the batteries have leaked.
• The chemicals in batteries could cause burns or other health hazards.
Safety Precautions
6 Indoor Unit
Do not drink the water drained from the product.
• It is not sanitary and could cause serious health issues.
Use a firm stool or ladder when cleaning or maintaining the product.
• Be careful and avoid personal injury.
Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries.
• There is risk of fire or explosion
Do not step on or put anyting on the product. (outdoor units)
• There is risk of personal injury and failure of product.
Always insert the filter securely. Clean the filter every two weeks or more often if necessary.
A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage. (Grill Type)
Do not insert hands or other objects through the air inlet or outlet while the product is operated.
There are sharp and moving parts that could cause personal injury.
Page 7
Ownerʼs Manual 7
Prior to operation
Prior to Operation
1. Contact an installation specialist for installation.
2. Use a dedicated circuit.
1. Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unitʼs power is accidentally triggered on while cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Preparing for Operation
Usage
Cleaning and Maintenance
Service
ENGLISH
Page 8
Operating Instructions
Operating Instructions
8 Indoor Unit
Name and function of wired remote controller(Accessory)
※ Some functions may not be operated and displayed depending on the product type.
※ It will display strange value to the room temperature if wired remote controller is not connected.
Model : PQRCVSL0 (Black Color)
PQRCVSL0QW (White Color)
1. Operation indication screen
2. Set temperature button
It will set not room temperature but outlet air temperature.
3. Fan speed button
• Fan Speed have 3 Steps.
• Middle and Low step is same
4. ON/OFF button
5. Opration mode selection button
6. Wireless remote controller receiver
• Some products don't receive the wireless signals.
7. Air flow button
8. Subfunction button
9. Function setting button
10. Ventilation button
11. Reservation
12. Up,down,left,right button
To check the indoor temperature, press
button.
13. Room temperature button
• Displays only the room temperature of the remote controller perception.
• There is no control of room temperature.
• In case of fresh air intake unit, displays only the temperature around remote controller.
14. Setting/Cancel button
15. Exit button
1
10
9
8
7
11
12
13
14
15
Please attach the inform label inside of the door. Please choose proper language depend on your country.
2
3
4
5
6
Page 9
Operating Instructions
Name and Function of Wireless Remote Controller(Accessory)
1. Plasma button(optional)
Used to start or stop the plasma-purification function.
2. Jet cool button
Speed cooling operates super high fan speed.
3. Operation mode selection button
Used to select the operation mode.
4. Function setting button
Used to set or clear auto clean or smart clean.
5. LCD luminosity button(optional)
Used to adjust LCD luminosity
6. Smart clean button(optional)
Used to start or stop smart clean.
7. Clean button
Used to clear all timer.
8. Room temperature setting button
Used to select the room temperature.
9. On/Off button
Used to turn on/off the unit.
10. Indoor fan speed selection button
Used to select fan speed in four steps low, medium, high and chaos.
11. Auto swing button
Used to stop or start louver movement and set the desired up/down airflow direction.
12. Horizontal airflow direction control button(optional)
Used to set the desired horizontal airflow direction.
13. Timer and time setting button
Used to set the time of starting or stopping and sleeping operation.
14. Room temperature checking button
Used to check the room temperature.
15. °C/°F switch button
Used to switch temperature reading from Celsius to Fahrenheit.
16. Reset button
Used to reset the remote controller.
Ownerʼs Manual 9
ENGLISH
1
2
3
4
5 6
7
PQWRCDF0 (Heat pump) PQWRHDF0 (Cooling only)
Operation Mode
Cooling mode
Auto mode or auto changeover
Dehumidification mode
Heating mode
Fan mode
8
9
10
11
12
13 14
15
16
Cooling model( ), Heat pump model( )
Page 10
Operating Instructions
Forced operation (Tact switch)
Forced Operation
Auto Restart Function
Tips for Filter Sign LED (Grille Type)
Operation procedures when the remote control can't be used. Press the tact switch (forced operation) for 2 seconds. If you want to stop operation, press again the tact switch. In case the power comes on again after power failure on the forced operation mode, the operating conditions are automatically set as follows: During forced operation, the initial mode continues.
In case the power comes on again after a power failure, auto restarting operation is the function to operate procedures automatically to the previous operating conditions.
1. Filter sign lamp (LED) is on.
2. If LED indicating filter sign lamp is on, clean the filter.
3. After cleaning the filter, press the timer button and button of wired remote controller at the same time for 3
seconds. Then filter sign LED is off.
Heat pump model
Cooling model
Room temperature Room temperature
≥ set temperature -2°C ≥ set temperature -2°C
Operating mode Cooling Cooling Heating
Indoor fan Speed High Set available Set available
Setting temperature 22°C Set available Set available
10 Indoor Unit
Page 11
Maintenance and Service(Robot + Panel Type)
Maintenance and Service
B
e
n
z
e
n
e
S
C
O
U
R
I
N
G
C
L
B
A
R
G
E
R
S
I
N
N
E
R
R e m o t e
C o n t r o
l l e r
T E M
P
Wired remote
controller
Air outlet
Air inlet
Front panel
Suction motor
Clean boy
Right cover
Panel, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
Supply power must be disconnected before cleaning the indoor unit.
NOTICE
1. Remove right cover of front panel.
2. Push button and pull down.
3. Open the cap, dump out dust and then wash clean boy.
4. After drying, push up clean boy until clicking sound.
5. Reassemble right cover.
Clean boy
Please sweep clean boy every five years or it is required.
Before performing any maintenance, turn off the main power to the system.
CAUTION
n Never use any of the followings:
Water hotter than 40°C.
Could cause deformation and/or discoloration.
Volatile substances.
Could damage the surfaces of the air conditioner.
Ownerʼs Manual 11
ENGLISH
Handle
Button
Page 12
Maintenance and Service
Maintenance and Service(Standard + Panel Type)
Panel, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with a
soft, dry cloth. Do not use bleach or abrasives.
Supply power must be disconnected before cleaning the indoor unit.
NOTICE
1. Remove air filters.
n
Take hold of the tab and pull slightly forward to remove the filter.
When the air filter is to be removed, do not touch the metal parts of the indoor unit. It may cause an injury.
2. Clean dirt from the air filter using a vacuum cleaner or washing with water.
n
If dirt is conspicuous, wash with a neutral detergent in lukewarm water.
n
If hot water (50°C or more) is used, it may be deformed.
3. After washing with water, dry well in
the shade.
n
Do not expose the air filter to direct sunlight or heat from a fire when drying it.
4. Install air filter.
CAUTION
Air Filter
The air filters behind the front grille should be checked and cleaned once every 2 weeks or more often if neccessary.
Before performing any maintenance, turn off the main power to the system.
CAUTION
n Never use any of the followings:
Water hotter than 40°C.
Could cause deformation and/or discoloration.
Volatile substances.
Could damage the surfaces of the air conditioner.
R e m
o t e C o n
t r o l l e r
T E
M P
Wired remote
controller
Air outlet
Air inlet
B
e
n
z
e
n
e
S
C
O
U
R
I
N
G
C
L
B
A
R
G
E
R
S
I
N
N
E
R
Air filter
12 Indoor Unit
Page 13
Maintenance and Service
Maintenance and Service(Standard + Grille Type)
B
e
n
z
e
n
e
S
C
O
U
R
I
N
G
C
L
B
A
R
G
E
R
S
I
N
N
E
R
R e m o t e
C o n t r o
l l e r
T E M
P
Wired remote
controller
Air inlet
Rack
Air filter
Air outlet
Grille, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
Supply power must be disconnected before cleaning the indoor unit.
NOTICE
1. Remove air filters.
n
Take hold of the tab and pull slightly forward to remove the filter.
When the air filter is to be removed, do not touch the metal parts of the indoor unit. It may cause an injury.
2. Clean dirt from the air filter using a vacuum cleaner or washing with water.
n
If dirt is conspicuous, wash with a neutral detergent in lukewarm water.
n
If hot water (50°C or more) is used, it may be deformed.
3. After washing with water, dry well in
the shade.
n
Do not expose the air filter to direct sunlight or heat from a fire when drying it.
4. Install air filter.
CAUTION
Air Filter
The air filters behind the front grille should be checked and cleaned once every 2 weeks or more often if neccessary.
Before performing any maintenance, turn off the main power to the system.
CAUTION
n Never use any of the followings:
Water hotter than 40°C.
Could cause deformation and/or discoloration.
Volatile substances.
Could damage the surfaces of the air conditioner.
TT chassis : 6EA Rack TU chassis : 4EA Rack
Ownerʼs Manual 13
ENGLISH
Page 14
Maintenance and Service
B
e
n
z
e
n
e
S
C
O
U
R
I
N
G
C
L
B
A
R
G
E
R
S
I
N
N
E
R
Plasma filter
Air filter
R e m o t e
C o n t r o
l l e r
T E M P
Wired remote
controller
Air inlet
Rack
Air outlet
Grille, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
Supply power must be disconnected before cleaning the indoor unit.
NOTICE
1. Remove air filters.
n
Take hold of the tab and pull slightly forward to remove the filter.
When the air filter is to be removed, do not touch the metal parts of the indoor unit. It may cause an injury.
2. Remove plasma filter.
n
Unscrew 2 screws from plasma filter.
3. Clean dirt from the air filter using a vacuum cleaner or washing with water.
n
If dirt is conspicuous, wash with a neutral detergent in lukewarm water.
n
If hot water (50°C or more) is used, it may be deformed.
4. After washing with water, dry well in
the shade.
n
Do not expose the air filter to direct sunlight or heat from a fire when drying it.
5. Install plasma filter and air filter.
CAUTION
Air Filter
The air filters behind the front grille should be checked and cleaned once every 2 weeks or more often if neccessary.
Before performing any maintenance, turn off the main power to the system.
CAUTION
n Never use any of the followings:
Water hotter than 40°C.
Could cause deformation and/or discoloration.
Volatile substances.
Could damage the surfaces of the air conditioner.
TT chassis : 6EA Rack TU chassis : 4EA Rack
14 Indoor Unit
Maintenance and Service(Plasma + Grille Type)
Page 15
Maintenance and Service
CAUTION
CAUTION
When the air conditioner is not going to be used for a long time.
Operation Tips
Helpful information
The air filters and your electiric bill. If the air filters become clogged with dust, the cooling capacity will drop, and 6% of the electricity used to operate the air conditioner will be wasted.
When it is not going to be used for a long time.
When the air conditioner is to be used again.
Operate the air conditioner at the following settings for 2 to 3 hours.
• Type of operation: Fan operation mode.
• This will dry out the internal mechanisms.
Turn off the breaker.
Turn off the breaker when the air conditioner is not going to be used for a long time.
Dirt may collect and may cause a fire.
Clean the air filter and install it in the indoor unit.
Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
Check that the ground wire is connected correctly. It may be connect to the indoor unit side.
Do not overcool the room.
This is not good for the health and wastes electricity.
Keep blinds or curtains
closed.
Do not let direct sunshine enter the room when the air conditioner is in operation.
Keep the room temperature
uniform.
Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows as much as possible to keep the cool air in the room.
Clean the air filter regularly.
Blockages in the air filter reduce the airflow and lower cooling and dehumidifying effects. Clean at least once every two weeks.
Ventilate the room
occasionally.
Since windows are kept closed, it is a good idea to open them and ventilate the room now and then.
Ownerʼs Manual 15
ENGLISH
Page 16
Maintenance and Service
Before you call for service...
?
Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.
Troubleshooting Tips! Save time and money!
• Have you made a mistake in timer operation?
• Has the fuse blown or has the circuit breaker been tripped?
• Check that this is not a damp smell exuded by the walls, carpet, furniture or cloth items in the room.
• Condensation occurs when the airflow from the air conditioner cools the warm room air.
• This is the protector of the mechanism.
• Wait about three minutes and operation will begin.
The air conditioner
does not operate.
The room has a
peculiar odor.
It seems that
condensation is
leaking from the air
conditioner.
Air conditioner does
not operate for about
3 minutes when
restart.
Does not cool or heat
effectively.
The air conditioner operation is noisy.
Crack sound is
heard.
Remote control
display is faint, or no
display at all.
• Is the air filter dirty? See air filter cleaning instructions.
• The room may have been very hot when the room air conditioner was first turned on. Allow time for it to cool down.
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents obstructed?
• For a noise that sounds like water flowing.
-This is the sound of
freon flowing inside the air conditioner unit.
• For a noise that sounds like the compressed air releasing into atmosphere.
-This is the sound of
the dehumidifying water being processed inside the air conditioning unit.
• This sound is generated by the expansion/ constriction of the front panel, etc. due to changes of temperature.
• Cleaning the filter, press the Timer button
and button of wired remote controller at
the same time for 3 sec.
• Are the batteries depleted?
• Are the batteries inserted in the opposite (+) and (-) directions? 
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to excess water.
NOTICE
Filter sign lamp
(LED) is ON.
(Grill Type)
16 Indoor Unit
Page 17
Loading...