LG AP-WX60 User guide
AP-WX60 AL-WX60
/Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-8 |
-8 |
||||
8-Bolts for tilt wall mounting bracket |
8-Wall Anchor Bolt Sleeves |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(M6X35)-4 (M4X6)-7
4-Bolts for guide spacer 7-Bolts for size adjustment bracket
-4 |
|
|
|
-2 |
|||
4-Guide Spacer |
2-Safety Ring |
||
Tilt wall mounting bracket
Installation and Setup Guide
-2 |
|
2-Cable tie band |
Installation and Setup Guide |
|
|
Guide Sticker |
Hole Drilling Template |
P/NO : 3828VA0495F(1106-REV04)
Safety Instructions
- . |
- , . |
- Qualified service technician should install the product properly after reading this manual thoroughly. |
-Qualified service technician should hand this manual over to the customer after installation and ask him/her to read and keep it.
.
After reading this manual, keep it in the place that the user always can contact easily.
/ WARNING
.
,
.
Do not install this product by yourself. Contact the service technician qualified by
the manufacturer.
It may cause injuries.
,
.
.
Contact the qualified service technician for moving or replacing this
product after installing.
Installing the product needs specified technic, it may cause safety problem to move or install it by yourself.
.
.
Do not install this product on the place where it cannot be supported.
It may cause the product to fall and could cause injuries.
.
.
Do not hang on or impact on this product.
It may cause the product to fall and could cause injuries.
2
/ NOTES
.
.
Be sure to follow these instructions when installing this product. 
Otherwise it may cause serious injuries or damage of the product.
,
.
.
Before installing, check whether the material of wall satisfies the specifications and make sure to use enclosed anchors supplied with the product.
Otherwise it may cause safety problem.
, .
, ,
.
Do not place a heat source (radiator or heater) or a humidifier under the installed product.
It may cause a fire or could give an electric shock.
.
,.
Make sure to unplug before installing this product.
Otherwise it may cause a fire or could give an electric shock.
.
.
Do not install this product by yourself. Get some help from others. 
It may cause the product to fall and could cause injuries.
.
.
.
When drilling use drill and drill bit specified by the manufacturer. And the depth of the hole should satisfy the specifications.
Otherwise it may cause safety problem.
,
,.
Do not install this product near a sprinkler, a sensor, a high voltage electric line, any power source or the place where impact or vibration can affect.
,.
.
Do not install this product barehanded.
It may cause injuries.
<![endif]>KOREAN / ENGLISH
3
/ Installation
1 /Fixation of width adjustment bracket by size
<Plasma/LCD VESA(800x400/600x400), Plasma 42 /50 >
.1. .
2. 1, 2 (M4x6) 3 .
3. (M4x6) 4 .
<Installation method of Plasma/LCD VESA (800x400/600x400), 42/50inch Plasma>
Install the product in the following order. 1. Check the product size.
2. Fixate 3 bolts(M4x6) to size adjustment bracket 1 and 2 for inch adjustment.
3. Fixate 4 bolts (M4x6) on the size adjustment bracket and tilt wall mounting bracket.
2 |
Size adjustment bracket 2 |
1
Size adjustment bracket 1
Tilt wall mounting bracket
(M4x6)
Bolts for size adjustment bracket(M4x6)
1+2
Size adjustment bracket 1+2
< > |
<Bolt integrated spot/in the blank> |
+ : Plasma/LCD VESA(800x400) |
+ : Plasma/LCD VESA (800x400) Corresponding model |
+ : 50 (127cm)Plasma (VESA ) |
+ : 50inch Plasma (VESA Non-corresponding model) |
+ : 42 (106cm)Plasma (VESA ) |
+ : 42inch Plasma (VESA Non-corresponding model) |
+ : Plasma/LCD VESA (600x400) |
+ : Plasma/LCD VESA (600x400) Corresponding model |
(05 ) |
(The installation standard for the model after the year 2005) |
4
Loading...