OWNER’S MANUAL
ULTRA HD Upgrade Kit
Installation Guide
Please read this manual carefully before operating your set and retain it for future reference.
AP-HV400
P/No:MFL68005101 (1308-REV00)
2 |
TABLE OF CONTENTS |
<![endif]>ENGLISH
TABLE OF CONTENTS
3 ABOUT UPGRADE KIT
3 PREPARATION
3Unpacking
4INSTALLATION
4 Updating TV software
4Setting up the upgrade kit
5Playing contents
5SmartShare™ supporting file
6Video Supported Codec
6 SPECIFICATION
ABOUT UPGRADE KIT / PREPARATION |
3 |
ABOUT UPGRADE KIT
This ULTRA HD Upgrade Kit allows the playback of ULTRA HD Video content on LG ULTRA HD TV’S.
<![endif]>ENGLISH
PREPARATION
Unpacking
|
|
|
|
|
|
|
|
|
|
|
ULTRA HD |
|
Y Cable |
Velcro sticker |
|
|
Owner’s |
||||
Upgrader |
|
|
|
|
|
|
manual |
|||
|
|
|
|
|
|
|
|
|
|
|
USB memory stick
(TV Software file)
4 INSTALLATION
<![endif]>ENGLISH
INSTALLATION
This section on INSTALLATION mainly uses diagrams for the 65LA9700 model.
Updating TV software
1Connect the supplied USB to TV. The software update is started automatically.
2When the update is completed, TV is restarted.
Setting up the upgrade kit
1 Attach the velcro tape on back of TV as shown below.
2 Connect the " " cable to the jack as shown below.
3 Attach the upgrader on the TV (by using velcro sticker).
INSTALLATION
4Connect the " " cable end connector to HDMI input jack on TV.
5Connect the " " cable end connector to USB input jack on TV.
Playing contents
5
<![if ! IE]><![endif]>ENGLISH
1Connect the USB (flash) device to TV to supply content.
The [Linked device] appears in SmartShare List and when Pop Up appears press [YES].
2When [ULTRA HD Upgrade Kit has been connected] Pop Up appears Select content/file and it will commence to play.
SmartShare™ supporting file
yy Maximum data transfer rate : ULTRA HD [Depending on model]
-3840 X 2160 (H.264 L5.1) : 50Mbps (megabits per second)
-3840 X 2160 (H.265 L5.0) : 25Mbps (megabits per second)
yy Internal subtitle formats supported : ULTRA HD [Depending on model]
- It does not support internal subtitles.
6 |
INSTALLATION / SPECIFICATION |
<![endif]>ENGLISH
Video Supported Codec
yy Maximum :
ULTRA HD [Depending on model] : 3840 x 2160 @ 30p
Extension |
Codec |
|
|
|
|
|
|
.mkv / .mp4 / .ts |
Video |
H.264 |
/ AVC |
|
|
|
|
|
Audio |
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC |
|
|
|
|
|
.ts |
Video |
H.265 |
(HEVC) |
|
|
|
|
|
Audio |
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC |
|
|
|
|
|
yy The Video Supported Codecs above can be changed afterward.
Warning
yy Playing video
It supports the playback through USB only.
Only the .mp4, .mkv, .ts file extensions are supported.
ATTENTION : Your ULTRA HD TV may not support HEVC encoded contents that are not officially supplied by LG.
Unsupported codecs are only available after a software upgrade.
yy Note
Updating TV software first before setting up the upgrade kit. Only one ULTRA HD Upgrade Kit is supported.
SPECIFICATION
Model Name |
AP-HV400 |
|
|
Dimensions (mm) |
128 (W) x 99 (H) x 23 (D) |
|
|
Weight (g) |
200 |
|
|
Host interface |
USB 2.0 |
|
|
A/V Out |
1 Port |
|
|
Power Consumption |
4 W |
|
|
BENUTZERHANDBUCH
ULTRA HD-Aktualisierungskit
Installationsanleitung
Lesen Sie dieses Handbuch aufmerksam durch, bevor Sie Ihr Gerät zum ersten Mal verwenden, und bewahren Sie es zur späteren Verwendung auf.
AP-HV400
2 INHALTSVERZEICHNIS
INHALTSVERZEICHNIS
3INFORMATIONEN ZUM AKTUALISIERUNGSKIT
<![endif]>DEUTSCH
3 VORBEREITUNG
3Auspacken
4INSTALLATION
4Aktualisieren der TV-Software
4Einrichten des Aktualisierungskits
5Inhalte abspielen
5Von SmartShare™ unterstützte Dateien
6Unterstützte Videocodecs
6 TECHNISCHE DATEN
INFORMATIONEN ZUM AKTUALISIERUNGSKIT/VORBEREITUNG |
3 |
INFORMATIONEN ZUM AKTUALISIERUNGSKIT
Mit diesem ULTRA HD-Aktualisierungskit können Sie ULTRA HD-Videoinhalte auf LG ULTRA HD-TV-Geräten abspielen.
VORBEREITUNG
Auspacken
<![endif]>DEUTSCH
|
|
|
|
|
|
|
|
|
|
|
ULTRA HD- |
|
Y-Kabel |
Klettband |
|
|
Benutzerhand- |
||||
Upgrader |
|
|
|
|
|
|
buch |
|||
|
|
|
|
|
|
|
|
|
|
|
USB-Speicher- stick (TV-Software- Datei)
4 INSTALLATION
INSTALLATION
In diesem Abschnitt zur INSTALLATION werden hauptsächlich Abbildungen des Modells 65LA9700 verwendet.
<![endif]>DEUTSCH
Aktualisieren der TV-Software
1Verbinden Sie den bereitgestellten USB-Stick mit dem TVGerät. Die Softwareaktualisierung beginnt automatisch.
2Sobald die Aktualisierung abgeschlossen ist, wird das TV-Gerät neu gestartet.
Einrichten des Aktualisierungskits
1 Bringen Sie das Klettband wie unten gezeigt am TV-Gerät an.
2 Verbinden Sie das Kabel " " wie unten gezeigt mit der Buchse.
3 Befestigen Sie den Upgrader mithilfe des Klettband am TV-Gerät.
INSTALLATION 5
4Verbinden Sie den Anschluss " " am Kabelende mit der HDMI-Eingangsbuchse am TV-Gerät.
5Verbinden Sie den Anschluss " " am Kabelende mit der USB-Eingangsbuchse am TV-Gerät.
Inhalte abspielen
1Verbinden Sie den USB-Stick mit dem TV-Gerät, um Inhalte abzuspielen. Das [Verknüpftes Gerät] erscheint in der SmartShare-Liste.
Wenn das Popup-Menü erscheint, drücken Sie [JA].
2Wenn das Popup-Menü [Ultra HD Upgrade-Kit ist angeschlossen.] erscheint, wählen Sie den gewünschten Inhalt/die gewünschte Datei aus, und die Wiedergabe beginnt.
Von SmartShareTM unterstützte Dateien
yy Maximale Datenübertragungsrate: : ULTRA HD [Abhängig vom Modell]
-3840 X 2160 (H.264 L5.1) : 50 Mbps (Megabit pro Sekunde)
-3840 X 2160 (H.265 L5.0) : 25 Mbps (Megabit pro Sekunde)
yy Unterstützte integrierte Untertitelformate : ULTRA HD [Abhängig vom Modell]
- Unterstützt keine internen Untertitel.
<![endif]>DEUTSCH
6 |
INSTALLATION/TECHNISCHE DATEN |
Unterstützte Videocodecs
yy Maximum :
ULTRA HD [Abhängig vom Modell] : 3840 x 2160 @ 30p
<![endif]>DEUTSCH
Erweiterung |
Codec |
|
|
|
|
|
|
.mkv / .mp4 / .ts |
Video |
H.264 |
/ AVC |
|
|
|
|
|
Audio |
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC |
|
|
|
|
|
.ts |
Video |
H.265 |
(HEVC) |
|
|
|
|
|
Audio |
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC |
|
|
|
|
|
yy Die oben genannten Videocodecs können danach geändert werden.
Warnhinweise
yy Videowiedergabe
Unterstützt nur die Wiedergabe über USB.
Nur die Dateierweiterungen .mp4, .mkv und .ts werden unterstützt.
LG ULTRA HD TV sind mit den meissten HEVC codierten Inhalten kompatibel. Aufgrund der Vielzahl der Codec Varianten können möglicherweise einige Inhalte nicht abgespielt werden.
Sollten neuere Codec Versionen vorliegen, können diese per Software Update installiert werden.
yy Hinweis
Aktualisieren Sie die TV-Software, bevor Sie das Aktualisierungskit einrichten. Es wird nur ein ULTRA HD-Aktualisierungskit unterstützt.
TECHNISCHE DATEN
Modellname |
AP-HV400 |
|
|
Abmessungen (mm) |
128 x 99 x 23 (B x H x T) |
|
|
Gewicht (g) |
200 |
|
|
Hostschnittstelle |
USB 2.0 |
|
|
A/V Out |
1 Port |
|
|
Stromverbrauch |
4 W |
|
|
MANUEL D'UTILISATION
Kit de mise à niveau ULTRA HD Manuel d'installation
Veuillez lire attentivement ce manuel avant de mettre en service votre appareil et conservez-le afin de pouvoir vous y référer ultérieurement.
AP-HV400
2 |
TABLE DES MATIÈRES |
TABLE DES MATIÈRES
3À PROPOS DU KIT DE MISE À NIVEAU
3 PRÉPARATION
3 Déballage
<![endif]>FRANÇAIS
4 INSTALLATION
4Mise à jour du logiciel du téléviseur
4Configuration du kit de mise à niveau
5Diffusion de contenus
5Fichier de prise en charge SmartShare™
6Codec vidéo pris en charge
6CARACTÉRISTIQUES TECHNIQUES