OWNER'S MANUAL
3D Glasses
Please read the safety information carefully before using the product.
AG-S360
P/NO: SAC34026215 (1304-REV00)
www.lg.com
(Brazil : www.lge.com)
ABOUT THE PRODUCT
The AG-S360 is a pair of 3D glasses that use radio frequency (RF) (2.4 GHz) wireless communication.
■ Connect them to any TV compatible with RF glasses and enjoy vivid 3D images.
■ Watch 3D movies and view 3D photos with 3D glasses.
■ When using 3D glasses for the first time, make sure the coin cell battery is inserted correctly.
ACCESSORIES
ENGLISH
3D Glasses
(Body, Leg)
Nose Pad
(for users wear-
Coin Cell Battery
(CR2025)
ing regular
eyeglasses)
!
NOTE
▶ The accessories may look different from those shown here.
PART NAMES
Battery Slot
Power Button/LED Indicator
Nose Pad
PAIRING 3D GLASSES WITH 3D TV
Manual CD Quick Guide Cleaning Pad
Lenses
*1
2
Pairing means establishing a wireless connection between the 3D TV and 3D glasses.
*1
The 3D glasses pair with the 3D TV that has the strongest wireless signal. If there is more than one TV, place the 3D glasses within
10 cm of the 3D TV you want to pair with.
Recommended Pairing Distance:
10 cm
▶ The 3D glasses detect the unique ID of the TV within the recommended pairing distance; a pair of 3D
!
NOTE
glasses cannot detect more than one TV.
▶ If you want to connect the glasses to another TV, see "Re-syncing the Glasses."
1. Turn the 3D TV on and activate 3D mode. 1. Press and hold the power button on the
2. Place your 3D glasses within the recommended pairing distance and turn them
on.
3. During pairing, the LED indicator flashes
green and red alternately.
4. When pairing is complete, the LED
indicator goes off and the 3D glasses are
ready to use.
5. It is unnecessary to pair the 3D glasses
with the same 3D TV again.
Pairing the Glasses Re-pairing the Glasses
3D glasses for at least eight seconds until
the LED indicator turns green.
2. After the green LED indicator flashes
three times, the glasses are ready to pair.
3. Turn the 3D TV on and activate 3D mode.
4. Place your 3D glasses within the recommended pairing distance and turn them
on.
5. During pairing, the LED indicator flashes
green and red alternately.
6. When pairing is complete, the LED indicator goes off and pairing with the second
3D TV is complete.