LG AG-S350 User Manual
OWNER’S MANUAL
3D GLASSES
Please read this manual carefully before operating
and keep it for future reference.
AG-S350
P/NO: SAC34026212 (1202-REV03)
www.lg.com
FEATURES
AG-S350 are 3D glasses that use RF(2.4GHz) wireless communication.
ACCESSORIES
ENGLISH
■If the device is connected to the TV that supports the RF glasses, you can enjoy the vivid 3D images.
■You can enjoy movies or pictures made as 3D.
■If you are using your 3D glasses for the fi rst time, make sure that the battery is fully charged.
3D Glasses Nose Pad 8-pin mini USB
cable
NOTE
!
▶The pictures shown in this manual may differ from the actual appearances.
Manual CD Quick Start
Guide
PART NAMES
Nose Pad
3D Glasses’ Lenses
Pairing 3D Glasses with Your 3D TV
Pairing means establishing a wireless connection between the 3D TV and 3D glasses.
*1
If there is more than one TV in range, please place the 3D glasses within 10 cm of the 3D TV you want to pair the glasses with.
The 3D glasses will pair with the 3D TV which has the strongest wireless signal.
Recommended pairing
distance (10cm)
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
How to pair the glasses How to re-pair the glasses
*1
Pouches
!
ʹΞ
NOTE
1.
Turn the 3D TV on and switch the TV to
3D mode.
Place your 3D glasses within the recommended
2.
pairing distance and turn them on.
3. During pairing, the red and green LED
lights will blink alternately.
When the pairing is complete, the LED light
4.
goes off and the 3D glasses start working.
5. The 3D glasses will not need to be
paired with the same 3D TV again.
▶The device recognizes the unique ID of the TV to which it is connected. Thus, IDs of other TVs are not recognized by the
device. If you wish to re-connect the device to other TVs, please see “How to re-connect the glasses”.
1. Press and hold the power button on the
3D glasses for more than 8 seconds, the
green LED light should come on.
2.
The green LED light will blink three times
and then 3D glasses are ready to pair.
3. Turn the TV on and switch to 3D mode.
4.
Place your 3D glasses within the recommended
pairing distance and turn them on.
5. During pairing, the red and green LED
lights will blink alternately.
6. When the pairing is complete, the
LED light goes off and pairing with the
second 3D TV is complete.
2
Loading...