LG A9K-MAX1, A9K-PRO1 User guide [ru]

OWNER'S MANUAL

A9 K

Make sure to read the “SAFETY INSTRUCTIONS” carefully before starting to use this product. Please keep this Owner’s Manual within easy reach of the user. As the product is only intended for domestic use such as household cleaning, it must not be used for commercial, experimental or industrial purposes. Make sure to fully charge the product’s battery before first use of the product after purchasing it.

ENGLISH

www.lg.com

TABLE OF CONTENTS

This manual may contain images or content that may be different from the model you purchased.

This manual is subject to revision by the manufacturer.

SAFETY INSTRUCTION

READ ALL INSTRUCTIONS BEFORE USE........................................................... 4

WARNING............................................................................................................4

CAUTION ...........................................................................................................11

INSTALLATION

Product Overview.............................................................................................13

Installing the Charging Station ......................................................................17

Storing the Accessories ...................................................................................19

OPERATION

Getting Started .................................................................................................21

Charging the Battery .......................................................................................23

Using the Mop Nozzle .....................................................................................24

Using the Nozzles and Tools...........................................................................27

SMART FUNCTIONS

Using LG ThinQ Application............................................................................30

Smart Diagnosis Function...............................................................................32

MAINTENANCE

Cleaning the Appliance ...................................................................................34

Cleaning the Nozzles .......................................................................................37

TROUBLESHOOTING

Before Calling for Service................................................................................41

Rev.00_111120

WARNING

SAFETY INSTRUCTION

READ ALL INSTRUCTIONS BEFORE USE

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘ described below.

WARNING

Safety Messages

This symbol is displayed to indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.

WARNING

This indicates that the failure to follow the instructions can cause serious injury or death.

’ and ‘

CAUTION

’ as

CAUTION

This indicates that the failure to follow the instructions can cause the minor injury or damage to the product.

WARNING

• To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following:

Technical Safety

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person

SAFETY INSTRUCTION

responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

• Do not allow the appliance to be used as a toy. Close attention is necessary when used by or near children.

• Do not allow children to play with or hang on the appliance.

• Do not use the appliance with damaged power cord or plug. The cord must be replaced. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an LG Electronics service centre.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Place the cords from other appliances out of the area to be cleaned.

Battery

• Never use the battery, adapter, and the charging station from other appliances with this appliance. Use only the battery and the charging station provided by LG Electronics.

• Never use the battery, adapter, and the charging station from this appliance with other appliances.

ENGLISH

• Unplug the power cord and remove the battery if the appliance will not be used for an extended period of time.

• Do not use modified or damaged batteries.

• Do not disassemble, remove or short-circuit the battery.

• When disposing of the battery or the appliance, remove the battery from the appliance and safely dispose of it.

• Have specifically designated battery packs replaced when it is no longer able to hold a charge.

• Refer to the

Charging the Battery

section instructions for the

method of replacing the battery.

SAFETY INSTRUCTION

• When disposing of this appliance, follow regulations for disposal of rechargeable lithium-ion batteries.

• Follow all local ordinances and regulations when handling or disposing of the battery.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance.

• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, cleaning, serviing, or storing appliance.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.

• Under abusive conditions, liquid may be ejected from the battery. If this happens, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

• If the appliance is to be stored unused for a long period, the batteries should be removed.

• Before removing the battery, you must turn off this appliance.

Battery Specifications

• One or two batteries are provided, the number of batteries varies depending on the model purchased.

Model Name Type

: Rechargeable Lithium-ion Battery

Rated Capacity

: EAC63382204

: 25.2 V%, 2400 mAh

Installation

• To avoid an electrical shock or fire, do not install, charge or store the appliance where it may be exposed to water, rainfall or high humidity.

• Install, charge and store the appliance in a well-ventilated place.

SAFETY INSTRUCTION

• Avoid operating the appliance in areas where there is a risk of leakage of flammable gas, industrial oil or metallic dust.

• Do not store or install the appliance, power cord or plug near heating devices or open flames.

• Install the charging station on a firm, level surface.

• To prevent tipping, floor standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape.

• In wall-mounted mode installations, the charging station should be secured tightly to the wall using the provided wall anchoring screws.

• Use the anchoring screws only when attaching to concrete or similar solid surfaces.

• Never drill into a wall without first checking that the area behind it is free from power conduits, plumbing, vents, or cables.

• Do not use or store the appliance at temperatures below 5 ℃ or above 38 ℃.

• Do not store or install the appliance where it is exposed to temperatures below freezing or exposed to outdoor weather conditions.

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord or plug.

ENGLISH

Operation

• Read all instructions before using the appliance, and save these instructions.

• Use only as described in this manual. Use only manufacturer’s recommended attachment.

• This appliance is designed for normal indoor domestic use only. It is not to be used for any non-residential, commercial, or industrial application.

• This product should only be used with a 100 V - 240 V~ 50/60 Hz, 0.8 amp outlet. Make sure to check the power specifications of the place where you intend to use the appliance.

SAFETY INSTRUCTION

• Do not handle the power cord, plug, or appliance controls with wet hands.

• Wipe any moisture or dirt off the cord or plug with a dry cloth.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. Take it to an authorized LG Electronics service centre or dealer for assistance.

• Do not apply excessive force to the power cord to bend it, or place it under a heavy object as this will damage it.

• Do not use multiple-outlet adapters with this appliance. Make sure to use a power socket with a capacity of 10 A.

• Do not plug the appliance into a damaged or loose outlet.

• Make sure to unplug the power cord when the appliance is not to be used for an extended period of time.

• Do not damage, alter, excessively bend, twist, pull, pinch or heat the power cord.

• Before using the appliance, remove any wire or string on the floor.

• Avoid touching the prongs of the power plug with your finger(s) when unplugging the power cord.

• Do not cover the power cord with a rug or carpeting.

• Push the power plug firmly into the wall outlet so that it is not loose.

• If the product has been submerged, contact an LG Electronics service centre or dealer for instructions before resuming use.

• If the product makes a strange noise or emits an odour or smoke, discontinue use and contact an LG Electronics customer information centre.

• Only qualified technicians or service personnel from LG Electronics may disassemble, repair or modify the appliance.

• Never insert a sharp metallic object such as a pin, nail or knife in a hole or gap in the appliance or the charging station.

• Do not vacuum liquids with this appliance. Make sure that no water, beverage or detergent gets inside the appliance or the charging station.

SAFETY INSTRUCTION

• Do not allow the appliance to sweep up blades, thumb tacks, sawdust, sharp objects, or hot or cold ashes.

• Do not allow children to use the appliance.

• Do not let children or pets get close to the appliance when using, charging or storing.

• Do not insert the nozzle or tools in your mouth.

• Keep clothing and hair, fingers, or other parts of the body away from openings and moving parts.

• Do not operate the appliance with the suction inlet or outlet blocked.

• Do not use the appliance without the dust bin and filters in place.

• Do not use in an enclosed space where vapors are present from paint thinner, mothproofing substances, flammable dust or other explosive or toxic materials.

• Do not touch the charging terminals on the appliance or the charging station, or insert an electrified object inside the appliance or the station.

• Always store the appliance on the floor standing or wall-mounted charging station when it is not in use.

• Do not lean the appliance on walls, chairs or tables.

• If the earth leakage breaker is tripped when the product is put on the charging station, immediately remove the appliance from the charging station. Contact an LG Electronics customer service centre.

ENGLISH

• Use extra care when cleaning on stairs.

• Do not use or store a heating device or flammable substance(ether, benzene, alcohol, chemicals, combustible sprays, insecticide, air freshener or cosmetics) in close proximity to the appliance.

• Do not attempt to clean up a liquid substance (water, beverage), odourous substances (candy, chocolate, pet excrement), metallic objects (blades, pins), flammable substances, burning/ smoking(cigarettes, matches, or hot ashes), surfactants, or glass shards with this appliance.

• In the event of a gas leak(natural gas, propane gas, etc.), do not operate this or any other appliance. Open a window or door to ventilate the area immediately.

SAFETY INSTRUCTION

• Do not hold the charging station upside down with the battery in the charging station.

• Do not expose the appliance, and the battery in particular, to heat, a heating device or direct sunlight.

• Do not keep the appliance or its battery inside a vehicle which is exposed to direct sunlight.

• Never allow any water, beverage or detergent to get inside the battery.

• Do not apply physical impacts to the battery.

Maintenance

• Make sure to unplug the power cord when cleaning or maintaining the charging station.

• Do not wash the inlet port or the dust bin with water or detergent.

• Do not use detergents, polishes or air fresheners to clean the dust bin.

• Do not apply or spray a flammable substance (gasoline or thinner) or surfactants (detergent or bath soap) on the appliance.

• Wash hands after handling nozzles. The nozzles contain carbon fiber, and contact may cause minor skin irritation.

Disposal

• Keep packing materials out of the reach of children. Packaging materials can pose a suffocation risk for children.

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.

• Dispose of this appliance according to local, state, and regional laws and regulations.

• Contact your local city council or the related government authority before disposing of this appliance.

SAFETY INSTRUCTION

CAUTION

Mop Nozzle

• Do not vacuum sharp objects (glass pieces, wire, blades, pins, etc.) with the mop nozzle attached. When cleaning the mop pads after mopping, you could be injured by a sharp object embedded in the mop.

CAUTION

• To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following:

Operation

• This appliance has a built-in safety device to prevent damage from overheating. If the appliance becomes overheated after extended use, it may automatically turn off. If this occurs, leave the appliance in a cool, well-ventilated area for about an hour before turning on the power again.

ENGLISH

• Do not subject the product to shocks or drop it.

• Do not install wet or damp filters.

• Always use a soft cloth to clean the appliance. Do not clean the product with a volatile or organic solvent(thinner or acetone).

• Do not clean the same spot repeatedly for an extended period of time. Doing so may damage the carpet or flooring surface.

• Keep fingers away from pinch points when assembling the appliance or the charging station.

• Do not use the double-sided tape to anchor the charging station on wallpaper. Use the provided screws to anchor the charging station. The weight of the charging station and the appliance could damage the paper.

• Do not apply force or any impact to the Cyclonic Mesh Filter.

• Do not remove the battery during operation.

SAFETY INSTRUCTION

Mop Nozzle

• Do not use the mop nozzle for any purpose(for example, polishing a car, cleaning windows) other than domestic floor cleaning.

• Do not use the mop nozzle to vacuum up liquids(water, beverage).

• When using the mop nozzle, always attach the mop pads.

• Do not clean a coated, rough or delicate floating floor and carpets with the mop nozzle.

• Do not use the mop nozzle to clean the same spot repeatedly for an extended period of time. The water injection at the mop nozzle may cause water to get into the dust inlet and damage the appliance.

• Do not step on the mop nozzle.

• Wet floors can pose a slip hazard. Allow floors to dry completely before allowing anyone to walk on them.

• Do not store the appliance by attaching the water tank filled with water to the mop nozzle.

INSTALLATION

Product Overview

The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes.

Front View

*1 This feature is only available on some models.

ENGLISH

Charging Station

Auxiliary Charging Station

Battery (Dual Battery*1)

Product Body

Extension Pipe

Nozzle

Floor Stand Dock

Floor Stand Pipe

Adapter

Detachable Nozzle Storage

Tool Holders

Exhaust Filter

Pre-filter

Kompressor Lever

Cyclonic Mesh Filter

INSTALLATION

Accessories

*1 This accessory is only available on some models.

Included Accessories

Charging Station

Extension Pipe

Adapter

Pre-filter

Battery (Dual Battery*1)

Floor Stand Dock

Floor Stand Pipe

Basic Accessories

Nozzles

Multi-Surface Nozzle

Slim Hard Floor Nozzle

Bedding Nozzle

Pet Nozzle

Installation Kit

Wall Anchoring Block

Double-Sided Tape

Drywall Anchor

Wall Anchoring Screw

Stand Anchoring Screw

Tools and Accessory Bag

Combination Tool

Crevice Tool

Cleaning Brush

INSTALLATION

NOTE

Hard Dirt Tool

Mattress Tool

Multi-angle Tool

Flexible Crevice Tool

Flexible Hose Extension

Accessory Bag

Mop Kit

Specifications

Mop Nozzle

Detachable Nozzle and Mop Pads Storage

Mop Pads for General Cleaning

Measuring Cup

• The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Contact an LG Electronics customer service centre.

ENGLISH

Appliance

Model

Dimensions (Width X Depth X Height)

Weight

Power Consumption

Battery Run Time (Using two battery)

Battery Run Time (Using one battery)

• Dimensions are given for the assembled product body, extension pipe and nozzle.

A9**********

260 mm X 270 mm x 1120 mm

Approximately 2.6 kg

370 W in 120 W in 68 W in

Using with the Nozzle

Up to 12 minutes in Up to 40 minutes in Up to 80 minutes in

Using with the Nozzle

Up to 6 minutes in Up to 20 minutes in Up to 40 minutes in

Turbo

Mode (Maximum 590 W)

Power

Mode

Normal

Mode

Turbo Power Normal

Turbo

Power Normal

Mode

Using with the Tool

Up to 14 minutes in Up to 60 minutes in Up to 120 minutes in

Using with the Tool

Up to 7 minutes in Up to 30 minutes in Up to 60 minutes in

Turbo Power

Normal

Turbo

Power Normal

Mode

INSTALLATION

• Suction power is an average of suction power with IEC 62885-2, 5.8 standard tested by an independent test lab. Individually measured data would be different from a lab test result.

• Battery run time is the result of using a fully charged battery according to the LG Electronics test standard. Results may be different depending on actual use environment and period of use.

*1 The Nozzle contains the direct drive motor that rotates the nozzle cleaning head directly.

Charger Adaptor

Model ADC-30FSA-30 29430EPG

Input

Output

100-240 V~, 50/60 Hz, 0.8 A

DC 29.4 V%, 1.0 A

Installing the Charging Station

INSTALLATION

Assemble the charging station onto the top of the floor stand pipe.

Self-Standing Installation

Follow the steps below to install the charging station on a hard and level floor.

Place the floor stand dock on a hard and level floor and assemble the floor stand pipe.

Clip the power cord tidily into the cord keeper

on the back of the floor stand pipe.

Slide the detachable nozzle storage onto the floor stand pipe.

• Make sure not to pinch or tangle the power cord behind the mop pads storage.

Connect the power adapter to the port on the back of the charging station.

Drill a hole in the wall and insert the drywall anchor

if needed.

• Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location.

• For drywall anchor: use 1/4″ (6.5 mm) drill bit

• For concrete or wall stud: use 1/8″ (3 mm) drill bit

• If screwing into drywall, use the drywall anchor.

ENGLISH

Align the wall anchoring block c of the chanrging station, and fix the charging station

NOTE

INSTALLATION

to the wall by tightening the anchoring screw

all the way.

Plug the power cord into the power outlet.

• The charging station can be removed as needed. To remove it, hold the floor stand dock steady and pull up on the charging station.

Attach the second piece of double-sided tape to the other side of the wall anchoring block to secure it to the wall.

• Do not use double-sided tape on wallpaper.

Wall-Mounted Installation

For wall-mounted installations, the charging station must be attached securely to the wall using the provided(short) wall anchoring screws.

• The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation.

Connect the power adapter to the port on the back of the charging station.

Using Double-Sided Tape to Secure the Appliance

Use the double-sided tape a to attach the wall anchoring block

• Remove the centre section of double-sided tape before attaching it to the wall anchoring block.

to the charging station.

Drill 2 holes and insert the drywall anchors(if needed) at least 1 m from the floor and near enough to easily reach a power outlet.

• Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location.

• For drywall anchor: use 6.5 mm drill bit

• For concrete or wall stud: use 3 mm drill bit

INSTALLATION

CAUTION

• If screwing into drywall, use the drywall anchors.

Attach the charging station to the wall with the wall anchoring screws.

Plug the power cord into the power outlet.

Compact Installation

For safety and convenience, install the charging station using the self-standing or wall-mounted installation methods. If you choose not to install the charging station, place it on a level floor for charging or storage.

Separate the extension pipe and nozzle from the product body before charging or storing the appliance.

Plug the power cord into the power outlet.

• Leaving the appliance on a level floor for a long time with the extension pipe and nozzle attached may damage the appliance.

Storing the Accessories

Storing the Tools

Store the frequently used tools such as the combination tool, crevice tool and cleaning brush at the bottom of the charging station.

• Slide the cleaning brush up into the tool holder.

• Slide the combination tool over the cleaning brush and onto the tool holder.

• To remove a tool, press the release button at the front of the tool.

ENGLISH

Connect the power adapter to the port on the back of the charging station.

Place the charging station on a hard and level floor.

INSTALLATION

Storing the Nozzles

When a nozzle is not in use, store it in the convenient detachable nozzle storage so you can easily find it.

• The nozzle storage cradle is compatible with the

Hard Floor Nozzle

or the

Bedding Nozzle

Assembling the Appliance

Follow these steps to safely assemble the appliance.

Firmly attach the extension pipe c, nozzle d, or tool onto the product body

• To detach the extension pipe, press the extension pipe release button

Storing the Mop Pads

Up to 2 mop pads can be stored in the detachable mop pads storage.

• Store the mop pads completely in a dry state. It can result in an unpleasant odour.

Put the product body on the charging station.

Charging the Battery

• See on installing and charging the battery.

for instructions

OPERATION

Getting Started

Before Using the Appliance

• Support the bottom of the appliance when cleaning an elevated surface.

• To avoid scratches on polished floors, keep the brushes of the nozzles and tools free from grit, sand, or abrasive objects.

• Make sure that the exhaust filter or pre-filter is properly assembled before using the appliance.

• Close the dust bin cover properly before using the appliance. If the dust bin cover is left open, the suction strength may deteriorate and affect the cleaning results.

• Store the appliance in the charging station or plac e it f lat on th e floor whe n not in use. L eani ng the appliance against a wall or chair can result in product damage or personal injury if the appliance falls.

• Environmental conditions such as temperature and humidity may cause static electricity to accumulate on the appliance. Please contact LG Electronics customer information centre if the problem persists.

• Make sure to remove any foreign object such as a sock or stocking before using the appliance. Any foreign object on the inlet port or extension pipe will prevent the appliance from functioning properly.

• Please use the product at normal room temperatures as the battery runtime may deteriorate severely if used at temperatures lower than 5 ℃ or higher than 38 ℃ for an extended period of time.

• The battery runtime is dependent on the surface type and the suction power.

• Follow manufacturer’s recommendations when cleaning flooring, carpets, and rugs.

• Refer to the runtime details.

Specifications

section for battery

Assembling Attachments

Nozzles and tools can be attached to either the product body or the end of the extension pipe.

Insert the fully charged battery a into the cavity at the bottom of the handle on the product body.

Attach the nozzles, tools, or extension pipe by sliding them onto the inlet they click into place. The nozzles and tools can also be attached to the end of the extension pipe

• Detach the accessories by pressing the release button

Adjust the extension pipe by pressing the length adjustment button pipe and sliding until it clicks into place at the desired length.

• The extension pipe extends in four steps.

on the body until

on the back of the

ENGLISH

OPERATION

Press the mode.

• To turn off the appliance, press the

Power

button again.

button to activate the

Normal

Power

Adjusting the Suction Power

Adjust the suction power using the suction power adjustment button on the handle.

Power Button

• Press the on or off.

• Press the mode.

Suction Power Up (+) Button / Turbo Mode

• Press the + button to increase the suction power. (

• Press and hold the + button for more than 3 seconds to activate mode.

Suction Power Down (-) Button / Wi-Fi Mode

• Press the - button to decrease the suction power. (

• Press and hold the - button for 3 seconds to activate Wi-Fi and connect the appliance in the

Display

The handle of the appliance displays indicators for clogged objects, filter cleaning alerts, appliance

Power

button to turn the appliance

Power

button to activate

Normal~Power~Turbo

Turbo

Turbo~Power~Normal

LG ThinQ

application.

Normal

)

mode from

)

Power

connection status, and the remaining battery charge.

Clogged Objects Indicator

• This indicator lights up when the interior of the product body, extension pipe, inlets, nozzle, exhaust filter, pre-filter, or cyclonic mesh filter is clogged with foreign objects.

• If clogging persists, the motor will cycle and the appliance will shut off. Remove the foreign objects and clean the exhaust filter, pre-filter and cyclonic mesh filter following the steps in the Removing Foreign Objects section.

Filter Cleaning Cycle Alarm Indicator

• This indicator lights up when the appliance is used for a certain period of time. Clean the exhaust filter, pre-filter and cyclonic mesh filter if necessary.

Wi-Fi Indicator

• This indicator blinks when the appliance is connecting to the home Wi-Fi network, and the indicator lights up when the connection is complete.

Battery Level Indicator

• The remaining battery level is displayed in 3 stages according to the remaining battery power.

• The battery level indicator blinks when the battery needs to be charged.

• As the product is charging, bars light up on the battery level indicator to indicate the level of charge.

• Once the battery is fully recharged, 3 bars will remain lighted on the battery level indicator.

LG ThinQ

application or

OPERATION

WARNING

CAUTION

Charging the Battery

Before Charging the Battery

• Make sure that the adapter is connected to both the charging station and the power outlet.

• Fully charging a single battery usually takes 4 hours. It will take twice as long to charge both the main and auxiliary batteries.

• The battery will not be charged if the indoor temperature is below 5 ℃. Only charge the battery when indoor temperatures are between 5 ℃ and 38 ℃.

• The battery will eventually need to be replaced. Due to the battery characteristics, runtime is shortened after using the appliance repeatedly for an extended period.

• The last bar on the battery indicator begins to flash when the battery needs to be recharged. Use the appliance with a fully charged battery.

• To maintain battery life on dual-battery models, swap the positions of the two batteries periodically, between the main body and the auxiliary charging station.

Charging the Product Body

Storing the appliance on the charging station automatically recharges the battery.

• If you don't hear a beep, reload the appliance on the charging station.

ENGLISH

• Make sure to securely fit the product body onto the charging station. If the appliance falls off the charging station, it could cause injuries, property damage or product damage.

Charging the Auxiliary Battery

An auxiliary battery can be stored and charged in the base of the charging station.

• Keep fingers away from pinch points when assembling or disassembling the battery from the product body or the charging station to avoid personal injury.

Press the off.

Put the product body onto the charging station by aligning it to the hook station.

• The battery level indicator starts to blink and

Power

button to turn the appliance

of the charging

begins charging the battery.

Remove the discharged battery from the product body by pressing the battery release button on either side of the battery and pulling.

Insert the discharged battery into the auxiliary charging station.

• The battery will only fit into the cavity if aligned properly.

CAUTION

OPERATION

• The auxiliary charging indicator blinks while recharging is in progress.

• The auxiliary charging indicator lights up when charging is complete.

Using the Mop Nozzle

Before Using the Mop Nozzle

• The mop pads only rotate at one speed regardless of what suction power setting the product body is set to.

• To prevent product damage, the mop attachment plate will automatically stop if there are foreign objects stuck in the plate or if it is subjected to a strong impact. Turn the appliance off immediately and remove the foreign objects or obstructions before resuming use.

• If you hear a noise while mopping, the mop pad may have dropped off the mop attachment plate. Turn off the product immediately and reattach the mop to the attachment plate before resuming use.

• Do not use a soiled mop pad to clean floors.

• Use only authorized LG Electronics mop pads.

• Empty the dust bin and clean the fine dust filter and the pre-filter after using the mop nozzle.

• Press the function.

• Press the button once to turn off the dust suction function.

• Do not assemble or disassemble the nozzle while the appliance is turned on. Doing so may result in injury.

• Set the water adjustment button to the position when not using the appliance for an extended period of time. Failure to do so may result in product failure.

• Do not let the appliance stand on the floor while the wet mop pads are attached. Doing so may result in damage or swelling to wood flooring.

• Do not use on PVC or PU mat for infants or children. Friction can cause the motor to overheat.

• If you use the mop nozzle for a long time with the suction off, the motor may overheat (recommended duration of use: 80 minutes). When the moter overheats, the overheating prevention function is activated and the appliance is automatically turned off. Use the appliance after cooling the heat for about one hour in a cool, well-ventilated place.

button to turn on the dust suction

button once while pressing the ~

STOP

Using the Wet Mop Pads

Press the mode and not turn on the dust suction function.

Power

button. You can use the only mop

Filling the Water Tank

Press the tank from the mop nozzle.

PUSH

button a to remove the water

OPERATION

Open the water inlet cap b on the side of the water tank and fill the tank with water using the measuring cup

• Open only one water inlet cap to fill the water. Opening both caps may cause the water to flush.

• Do not fill the tank over the

• Do not put liquid other than water and hot water in the water tank.

Close the water inlet cap tightly.

• If the water inlet cap is not closed properly, water may leak.

MAX

line d.

• Attaching and using mop pads while they are dry may affect the cleaning results.

Place the mop nozzle upside down on the floor.

Align and attach the centre of the mop pad with the centre of the mop attachment plate.

• Attach the mop pad so the striped side is visible. Attaching the mop pad upside down or improperly may affect the cleaning results.

ENGLISH

Attach the water tank to the mop nozzle again.

• Insert the 2 tabs tank into the slots nozzle. Press down at the centre the tank in place.

at the front of the water

on the top of the mop

Attaching the Mop Pads

Wet both sides of the mop pads with water then squeeze out any excess water before attaching the pads.

• Do not attach pads while they are dripping wet.

to lock

Attach the mop nozzle to the appliance.

Adjusting the Amount of Water

Press the water adjustment buttons to adjust the amount of water released onto the mop pad to either

High Mode

•

High Mode

the way down to clean ingrained dirt or supply a large amount of water.

•

Low Mode

way down to supply a small amount of water for cleaning wood or other flooring that can be damaged by too much water.

•

STOP

: Press the

button halfway to toggle back to the

: Press the

Low Mode

High Mode

Low Mode

button a all

button b all the

High Mode

STOP

WARNING

CAUTION

OPERATION

position. This stops the supply of water so you can go over areas that are already wet.

• To avoid injury, do not attach the mop pad while the mop attachment plate is rotating.

• Do not let the appliance stand on the floor while the wet mop pads are attached. Doing so may result in damage or swelling to wood flooring.

Using with the Mop Nozzle

Attach the water tank and mop pads to the mop nozzle.

Set the water adjustment button to the position.

Press the

Power

button to start cleaning.

STOP

a soft cloth. The water could drip onto the floor and damage it.

• Do not pull or stretch the rubber gasket on the water supply inlet. Doing so may tear or damage it.

Open the 2 water inlet caps a on the side of the water tank and empty the water tank. Shake the water tank to remove the remaining water.

Drying the Water Tank and Mop Pads

Drying the Water Tank

When cleaning is completed, make sure to empty the water tank and dry it before storing the mop nozzle.

• Turn the water inlet caps to make sure they remain open when storing the water tank. If caps are closed and not properly dried, it may cause odour.

• Do not remove the water inlet caps from the water tank. Caps may tear.

• Do not add detergent, vinegar or baking soda to the water tank when washing. It is not easily removed in the water tank, which may soil the floor.

• After cleaning, wipe off any remaining water on the water supply inlet

on the mop nozzle with

Leave the 2 water inlet caps open and allow the water tank to dry in a well-ventilated area out of direct sunlight for at least 24 hours.

• Keep the water tank after water is completely empty and dry. Moisture or residual water in the tank may cause odour.

Drying the Mop Pads

After using the mop pads, hand wash them and allow them to dry before storing them.

CAUTION

• Do not use as follows, as it may become

CAUTION

deformed.

- Do not use bleach or fabric softener when washing the mop pads.

- Do not dry the pads in a clothes dryer.

- Do not boil the mop pad.

OPERATION

damage to the mat or static electricity on the appliance. Clean mats using the crevice tool.

Multi-surface Nozzle

Use this nozzle to clean carpets or rugs.

• If used on hard flooring, this nozzle will be noisy.

ENGLISH

Separate the mop pads from the mop attachment plate.

Hand wash the pads with a neutral detergent.

• Storing mop pads in a damp state can result in an unpleasant odour. Set the pads in a well-ventilated area out of direct sunlight for at least 24 hours or until completely dry.

Using the Nozzles and Tools

Some accessories are only available on some models.

Specialized attachments can help you clean more effectively. Tools and nozzles can be attached to the product body or the extension pipe.

• Adjust the suction power if the inlet gets stuck on the floor, carpet, or bedding.

• Each Nozzle is equipped with a motor and may make a sound when operating.

Slim Hard Floor Nozzle

Use this nozzle to clean hard floor surfaces.

• While cleaning, it was not intended, but pressing the

PUSH

button on the nozzle may remove the

brush. Please attach the brush again.

Pet Nozzle

It is suitable for soft surfaces and pet hair removal.

• Do not use the nozzle following surface. It may cause scratch or damage. Especially, do not clean a coated or lacquered floor. If used repeatedly, the coating may wear off.

- Clothing, bedding

- Leather cushioned sofas, cushions

- Carpet

- Vinyl flooring, tiles, marble, etc.

• Do not use the

Hard Floor Nozzle

for infants and children. The mat may stick to the nozzle, making it difficult to operate, causing

Multi-Surface Nozzle

on PVC or polyurethane mats

Slim

Bedding Nozzle

This nozzle lets you clean sheets and bedding more effectively. It removes dust in bedding using strong suction and a punching motion.

OPERATION

• Lower the suction level when vacuuming bedding such as duvet covers to avoid the thin fabric getting sucked into the nozzle.

Crevice Tool

Use this tool to remove dust from corners or narrow spaces.

• Use it for areas with static electricity such as mats.

• Use it with the of furniture, mats, or tight areas like corners.

Turbo

mode to clean pet hair out

- To convert modes, press the adjustment button

and push forward.

Hard Dirt Tool

Firm bristles remove solidified dirt from hard surfaces. Clean up hair or foreign objects that are entangled in carpets or rugs.

Mattress Tool

Use this tool to clean up dust and foreign objects from mattresses, delicate fabrics, and upholstery.

Combination Tool

Can be used in either crevice mode or brush mode for cleaning corners or small gaps where dust and dirt gather.

•

Crevice Mode

Use the tool in the crevice mode to clean flat surfaces such as sofas or mattresses.

•

Brush Mode

Use the tool in the brush mode to clean delicate surfaces such as frames or furniture.

Flexible Crevice Tool

This tool is flexible and its length can be adjusted, making it especially useful for cleaning inside

OPERATION

vehicles or in narrow spaces under and behind furniture where an angled tool is needed.

Using the Brush

To convert the tool from crevice to brush mode, press in on the sides of the brush head the brush down.

• To convert back to the crevice mode, press in on the brush release button up.

Adjusting the Length

To adjust the length of the tool, press and hold the release button push on the brush head extension tube.

on the side of the tool. Pull or

and slide the brush

to extend or retract the

and pull

Multi-angle Tool

This tool has a soft brush that can be adjusted to a variety of angles, making it especially useful for cleaning vehicle consoles or the tops of furniture.

Flexible Hose Extension

Connect this flexible, extendable hose between the product body and the tools to clean hard to reach areas.

• The flexible hose extension cannot be used with the Nozzle.

ENGLISH

Using the Kompressor Lever

Use the Kompressor lever to compress hair and fibers inside the dust bin after vacuuming and before emptying the dust bin.

• The vacuum must be turned off before using the Kompressor lever.

• Compressing the dust clears it off the interior walls of the dust bin and allows you to vacuum for longer periods before emptying the dust bin. It also makes cleaning the dust bin easier and less messy.

• The dust bin must be at least half full for the compression plate to be effective.

• Press the Kompressor lever down several times to compress the dust and clean off the interior walls of the dust bin.

NOTE

SMART FUNCTIONS

Using LG ThinQ Application

The

LG ThinQ

communicate with the appliance using a smartphone.

LG ThinQ Application Features

•

Setting the default mop operation

- This function allows the setting of the default operation mode of the Mop Nozzle.

•

Cleaning History

- Shows the cleaning history, such as monthly cleaning time, cleaning frequency, and cleaning mode, etc.

• Assembled suction tool is displayed on the screen during cleaning.

• A notification is displayed on the screen if the pre-filter and the exhaust filter need cleaning.

Filter Cleaning Cycle Alarm

•

- After using the appliance for a centain period

of time, a notification is displayed on the screen of your smartphone. Clean the exhaust filter or pre-filter, if necessary.

•

Cleaning Mode

- The cleaning mode you are using is displayed

on the screen of your smartphone.

•

Filter Cleaning Guide

- Guide to cleaning the filters.

Smart Diagnosis

•

- This function provides useful information for

diagnosing and solving issues with the appliance based on the pattern of use.

• If you change your wireless router, Internet service provider, or password, delete the connected appliance from the application and connect it again.

• This information is current at the time of publication. The application is subject to change

application allows you to

™

LG ThinQ

for product improvement purposes without notice to users.

Before Using LG ThinQ Application

Use a smartphone to check the strength of the wireless router (Wi-Fi network) near the appliance.

• If the appliance is too far from the router, the signal becomes weak. It may take a long time to register or fail to install the application.

Turn off the your smartphone.

Connect your smartphone to the wireless router.

• To verify the Wi-Fi connection, check that the f icon on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

•

LG ThinQ

connection problems or any faults, malfunctions, or errors caused by network connection.

Mobile data

is not responsible for any network

Cellular Data

+ 70 hidden pages