LG 65UW660H Owner's Manual

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

43UW660H	49UW970H
49UW660H	55UW970H
55UW660H	65UW970H
65UW660H	75UW970H
MFL69412017		www.lg.com

P/NO : MFL69412017 (1702-REV02)

<![if ! IE]>

<![endif]>ENGLISH

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions.

Keep these instructions. Heed all warnings.

Follow all instructions.

••Do not use this apparatus near water.

••Clean only with dry cloth.

••Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

••Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

••Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

••Only use attachments/accessories specified by the manufacturer.

••Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

••Unplug this apparatus during lightning storms or when unused for long periods of time.

••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

••Do not apply pressure on the panel during handling or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••CAUTION concerning the Power Cord (Can differ by country):

Check the specification page of this owner’s manual to be certain concerning current requirements. Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact replacement part by an authorized

servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

••Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate

circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power

Circuit Supply

Breaker

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp

(NEC Section 810-20)

Electric Service

Grounding Conductor

Equipment

(NEC Section 810-21)

Ground Clamp

Power Service Grounding

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••If water or another substance enters the product (like an AC adapter, power cord, or TV), disconnect the power cord and contact the service center immediately. Otherwise, this may result in fire or electric shock.

••Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation.

••Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

••Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

••Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

••Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper.)

This may result in product malfunction.

••Dot Defect

This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

••Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

••Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

Viewing 3D Imaging

(For 3D models)

CAUTION

••Guardians should not leave children unsupervised who are watching a 3D video. Guardians should make children stop watching the video and take a break if they experience eye fatigue, headache, or dizziness.

••When viewing a 3D video, some may experience discomfort such as a headache, dizziness, fatigue, or blurred vision. In this case, stop watching the 3D video and take a break.

••If you watch a 3D video for a long time, you may experience eye fatigue. In this case, stop watching the 3D video and take a break.

••Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

••Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles. Place the 3D glasses over your normal eye ware.

••Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

••Do not use the 3D glasses while walking or moving around. It may cause an accident or injury.

••Be careful not to poke your eye with the frames of the 3D glasses.

••Do not watch 3D content if you have photosensitive seizures, epilepsy, or heart disease.

Preparing

NOTE

••When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

••Image shown may differ from your TV.

••Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

••The available menus and options may differ from the input source or product model that you are using.

••New features may be added to this TV in the future.

••The items supplied with your product may vary depending upon the model.

••Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

••For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

••Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

••Recommended HDMI cable types (3m or less) -- High-Speed HDMI®/™ cable

-- High-Speed HDMI®/™ cable with Ethernet

*A10 mm (0.39 inches) *B18 mm (0.7 inches)

CAUTION

••Do not use any unapproved items to ensure the safety and lifespan of the product.

••Any damages or injuries by using unapproved items are not covered by the warranty.

••Some models appear to have a thin film on the screen. It is actually part of the screen; do not

remove it.

••When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

••Do not fasten the screws with excessive force otherwise they may be worn out and become loose.

••When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (For UW970H series)

Warning when using USB storage devices

••USB storage devices with a built-in auto recognition program or its own driver may not work.

••Some USB storage devices may not work or may work improperly.

••Use only those USB storage devices formatted with FAT32 or NTFS File System provided by Windows.

••For external USB HDD, use devices with less than 5V-rated voltages and 500 mA-rated current.

••It is recommended to use USB flash drive with 32 GB or less and USB HDD with 2 TB or less.

••If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of USB HDD.

••Data in the USB storage device can be damaged so back up important files in other devices. Data maintenance is the user’s responsibility. The manufacturer is not responsible for data loss.

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.

(Depending upon model)

AN-VC550	AN-MR650	AG-F***
Smart Camera	Magic Remote	Cinema 3D
		Glasses

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

••It is recommended to move the TV in the box or packing material that the TV originally came in.

••Before moving or lifting the TV, disconnect the power cord and all cables.

••When holding the TV, the screen should face away from you to avoid damage.

••Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

••Use at least two people to move

a large TV.

••When transporting the TV by hand, hold the TV as shown in the following illustration.

••When transporting the TV, do not expose the TV to jolts or excessive vibration.

••When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

••When handling the TV, be careful not to damage the protruding buttons.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

CAUTION

••Avoid touching the screen at all times, as this may result in damage to the screen.

••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

••Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

Using the Button

(Depending upon model)

You can simply operate the TV functions, pressing or moving the button.

Dome Button

Basic Functions

Power On (Press)

Power Off (Press and Hold) 1

Volume Control

Channels Control

1 All running apps will close.

Adjusting the Menu

When the TV is turned on, press button one time. You can adjust the Menu items pressing or moving the buttons.

Turns the power off.

Accesses the setting menu.

Clears on-screen displays and returns to TV viewing

Changes the input source.

Mounting on a Table

1Lift and tilt the TV into its upright position on a table.

-- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm
(4 inches)
10 cm
10 cm
10	cm

2 Connect the power cord to a wall outlet.

CAUTION

••Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Adjusting the Angle of the TV to Suit View

(Depending upon model)

Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

20˚		0˚

CAUTION

••When adjusting the angle of the TV, watch out for your fingers.

-- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

Attaching the TV to a desk (optional)

(Depending upon model)

The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

[TYPE 1]

4-Screws

(Not provided as parts of the product.)

Stand

Desk

NOTE

••Screw: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15 mm, Screw: M5 x L25

[TYPE 2]

2-Screws, 2-Washers, 2-Nuts (provided as parts of the product.)

Stand

Desk

Using the kensington security system

(Depending upon model)

The Kensington security system connector is located at the rear or stand of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.

<![if ! IE]>

<![endif]>ENGLISH

Securing the TV to a Wall (optional)

1Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.

-- If there are bolts inserted at the eye-bolts position, remove the bolts first.

	2	Mount the wall brackets with the bolts to the
		wall. Match the location of the wall bracket and
		the eye-bolts on the rear of the TV.
	3	Connect the eye-bolts and wall brackets tightly
<![if ! IE]> <![endif]>ENGLISH		with a sturdy rope or cable. Make sure to keep
<![if ! IE]> <![endif]>ENGLISH	••Make sure that children do not climb on or hang

the rope parallel to the flat surface.

CAUTION

on the TV.

NOTE

••Use a platform or cabinet that is strong and large enough to support the TV securely.

••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

10 cm (4 inches)

10 cm 10 cm

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model	43UW660H	49/55UW660H
Model	43UW660H	49/55UW970H
VESA (A x B)	200 x 200	300 x 300
Standard screw	M6	M6
Number of screws	4	4
Wall mount	LSW240B	LSW350B
bracket (optional)	MSW240	MSW240

Model	65UW660H	75UW970H
Model	65UW970H	75UW970H
VESA (A x B)	300 x 300	600 x 400
Standard screw	M6	M8
Number of screws	4	4
Wall mount	LSW350B	LSW640B
bracket (optional)	LSW350B	LSW640B

CAUTION

••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

••When using the wall mount, it is recommended that you apply a piece of tape over the stand holes to prevent dust and bugs from entering the holes. (Depending upon model)

Stand Hole

••Depending upon the shape of the stand, use a flat tool to remove the stand cover as illustrated below. (e.g., a flat screwdriver)

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

HDMI and USB input.	<![if ! IE]> <![endif]>ENGLISH
NOTE
••This model supports 4K (ULTRA HD) videos in
••ULTRA HD videos are not supported in the tuner
input.
••If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
••The external device connections shown may
differ slightly from illustrations in a manual.
••Connect external devices to the TV regardless
about the order of the TV port.
••If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
••Refer to the external equipment’s manual for
operating instructions.

<![if ! IE]>

<![endif]>ENGLISH

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

CAUTION

••Make sure not to bend the copper wire of the RF cable.

Copper wire

••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

••Use a signal splitter to use 2 TVs or more.

••DTV Audio Supported Codec: MPEG, Dolby Digital.

••Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal.

••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model)

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

NOTE

••Use only with the 3 pole 3.5 mm stereo jack.

••Do not connect your headphones or earphones to the port for connecting an external speaker.

Remote Control

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.