LG 65LF6350 Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your set and
retain it for future reference.

40LF6300
43LF6300
49LF6300
55LF6300
60LF6300
65LF6300

42LF6500
50LF6500
55LF6500
60LF6390
65LF6390
65LF6350

*MFL68680204*

32LF595B
43LF5900
49LF5900
55LF5950

43LH5800

www.lg.com

P/No : MFL68680204 (1603-REV04)

Important Safety Instructions

Always comply with the following precautions
to avoid dangerous situations and ensure peak
performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol within an equilateral triangle is
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock

ENGLISH

to persons.

The exclamation point within an

equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.

CAUTION

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

NOTE

The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

 Do not use this apparatus near water.

 Clean only with dry cloth.

 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.

 Protect the power cord from being walked on

or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.

 Only use attachments/accessories specified by the

manufacturer.

 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

2

 Unplug this apparatus during lightning storms or

when unused for long periods of time.

gasoline or candles, or expose the TV to direct air
conditioning.

 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

 Do not press strongly upon the panel with a hand or

a sharp object such as a nail, pencil, or pen, or make a
scratch on it.

 Do not stick metal objects or any other conductive

material into the power cord. Do not touch the end of
the power cord while it is plugged in.

 Keep the packing anti-moisture material or vinyl

packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed, induce
vomiting and go to the nearest hospital. Additionally,
vinyl packing can cause suffocation. Keep it out of the
reach of children.

 CAUTION concerning the Power Cord

(Can differ by country):
Check the specification page of this owner’s manual
to be certain. Do not connect too many appliances
to the same AC power outlet as this could result in
fire or electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service. Protect
the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance. Do not move the TV with the
power cord plugged in. Do not use a damaged or
loose power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the power
cord to unplug the TV.

 Do not expose to dripping or splashing and do not

place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g., on shelves above
the unit).

 Grounding

(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e., a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone wires,
lightning rods, or gas pipes.

Power
Supply

Circuit
Breaker

 As long as this unit is connected to the AC wall outlet,

it is not disconnected from the AC power source even
if the unit is turned off.

 Do not attempt to modify this product in any way

without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.

ENGLISH

 Warning - To reduce the risk of fire or electrical shock,

do not expose this product to rain, moisture or other
liquids. Do not touch the TV with wet hands. Do not
install this product near flammable objects such as

3

 Outdoor Antenna Grounding

(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or
where it can come in contact with such power lines
or circuits as death or serious injury can occur. Be sure
the antenna system is grounded to provide some
protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with respect
to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

ENGLISH

NEC: National Electrical Code

 Cleaning

When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemicals
such as alcohol, thinners, or benzine.

 Moving

Make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more
people to carry larger TVs. Do not press or put stress
on the front panel of the TV.

 Ventilation

Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase. Do
not cover the product with cloth or other materials
while plugged in. Do not install in excessively dusty
places.

 If you smell smoke or other odors coming from the

TV, unplug the power cord and contact an authorized

service center.
 Keep the product away from direct sunlight.
 Never touch this apparatus or antenna during a

lightning storm.
 When mounting a TV on the wall, make sure not to

install the TV by hanging the power and signal cables

on the back of the TV.
 Do not allow an impact shock or any objects to fall

into the product, and do not drop anything onto the

screen.
 DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device. In case

of an emergency, the power plug must remain readily

accessible.

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

 Batteries

Store the accessories (battery, etc.) in a safe location
out of the reach of children.

 This apparatus uses batteries. In your community

there might be regulations that require you to dispose
of these batteries properly due to environmental
considerations. Please contact your local authorities

for disposal or recycling information.
 Do not dispose of batteries in a fire.
 Do not short circuit, disassemble, or allow the

batteries to overheat.
 Do not use high voltage electrical equipment near

the TV, (e.g., a bug zapper). This may result in product

malfunction.
 Dot Defect

This panel is an advanced product that contains

millions of pixels. In a very few cases, you could see

fine dots on the screen while you’re viewing the TV.

Those dots are deactivated pixels and do not affect

the performance and reliability of the TV.
 Generated Sound

Cracking noise A cracking noise that occurs when

watching or turning off the TV is generated by

plastic thermal contraction due to temperature and

humidity. This noise is common for products where

thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a high-speed

switching circuit, which supplies a large amount of

current to operate a product. It varies depending

upon the product. This generated sound does not

affect the performance and reliability of the product.
 Take care not to touch the ventilation openings. When

watching the TV for a long period, the ventilation

openings may become hot. This does not affect the

performance of the product or cause defects in the

product.
 Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.
 If the TV feels cold to the touch, there may be a small

flicker when it is turned on. This is normal; there is

nothing wrong with TV. Some minute dot defects

may be visible on the screen, appearing as tiny red,

green, or blue spots. However, they have no adverse

effect on the TV’s performance. Avoid touching the

LCD screen or holding your finger(s) against it for

long periods of time. Doing so may produce some

temporary distortion effects on the screen.
 Displaying a still image for a prolonged period of time

may cause an image sticking. Avoid displaying a fixed

image on the TV screen for a extended length of time.

4

FCC Notice

(For USA)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment
and the receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.

FCC Radio Frequency Interference
Requirements (for UNII devices)

High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with
and/or damage this device. This device cannot be
co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co­located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches) between
the antenna and your body. Users must follow the
specific operating instructions for satisfying RF
exposure compliance.

Industry Canada Statement

(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This device complies with RSS-210 of the Industry
Canada Rules. Operation is subject to the following
two conditions:

1. this device may not cause interference and

2. this device must accept any interference,
including interference that may cause undesired
operation of the device.

IC Radiation Exposure Statement

(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches) between
the antenna and your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

ENGLISH

5

WARNING

(For Canada)
[For product having the wireless function using
5 GHz frequency bands]

 The device for operation in the band 5150–5250

MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;

 The maximum antenna gain permitted for devices in

the bands 5250–5350 MHz and 5470–5725 MHz shall
comply with the EIRP limit; and

 The maximum antenna gain permitted for devices in

the band 5725–5825 MHz shall comply with the EIRP
limits specified for point-to-point and non point-to­point operation as appropriate.

 High-power radars are allocated as primary users

(i.e., priority users) of the bands 5250–5350 MHz
and 5650–5850 MHz and that these radars could
cause interference and/or damage to LE-LAN
devices.

Note to Cable/TV Installer

(For USA and Canada)
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines

ENGLISH

for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.

Viewing 3D Imaging
(For 3D models)

WARNING

Viewing Environment

Viewing Time



- When watching 3D contents, take five- to
fifteen-minute breaks every hour. Viewing 3D
contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or
chronic illness

Some users may experience a seizure or other



abnormal symptoms when they are exposed
to a flashing light or particular pattern from 3D
contents.
Do not watch 3D videos if you feel nausea, are



pregnant and/ or have a chronic illness such
as epilepsy, cardiac disorder, or blood pressure
disease, etc.
3D Contents are not recommended to those who



suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be
experienced.

If you have strabismus (cross-eyed), amblyopia



(weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue due
to double images. It is advised to take frequent
breaks than the average adult.
If your eyesight varies between your right and left



eye, correct your eyesight prior to watching 3D
contents.

Symptoms which require discontinuation or
refraining from watching 3D contents

Do not watch 3D contents when you feel fatigue



from lack of sleep, overwork or drinking.
When these symptoms are experienced, stop



using/watching 3D contents and get enough rest
until the symptom subsides.

- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness,
discomfort, double image, visual inconvenience
or fatigue.

CAUTION

Viewing Environment

Viewing Distance



- Maintain a distance of at least twice the screen
diagonal length when watching 3D contents.
If you feel discomfort in viewing 3D contents,
move further away from the TV.

Viewing Age

Infants / Children



- Usage/ Viewing 3D contents for children under
the age of 5 are prohibited.

- Children under the age of 10 may overreact and
become overly excited because their vision is
in development (for example: trying to touch
the screen or trying to jump into it.) Special
monitoring and extra attention is required for
children watching 3D contents.

- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D
image.

Teenagers



- Teenagers under the age of 19 may be
stimulated by light coming from 3D videos.
Advise them not to watch 3D videos for a long
time when they are tired.

Elderly



- The elderly may perceive less of a 3D effect than
the youth. Do not sit closer to the TV than the
recommended distance.

6

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you



may not be able to view 3D videos properly.
Do not use 3D glasses instead of your normal



glasses, sunglasses or protective goggles.
Using modified 3D glasses may cause eye strain or



image distortion.
Do not keep your 3D glasses in extremely high or



low temperatures. It will cause deformation.
The 3D glasses are fragile and are easily scratched.



Always use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the
3D glasses with sharp objects or clean/wipe them
with chemicals.

Preparing

NOTE

When the TV is turned on for the first time after



being shipped from the factory, initialization of
the TV may take approximately one minute.
Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ



slightly from that shown in this manual.
The available menus and options may differ from



the input source or product model that you are
using.
New features may be added to this TV in the



future.
The items supplied with your product may vary



depending upon the model.
Product specifications or contents of this manual



may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and USB



devices should have bezels less than 10 mm (0.39
inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if



the USB cable or USB flash drive does not fit into
your TV’s USB port.
Use a certified cable with the HDMI logo attached.



If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
Recommended HDMI cable types (3 m or less)



- High-Speed HDMI®/

- High-Speed HDMI®/TM cable with Ethernet

TM

cable

CAUTION

Do not use any unapproved items to ensure the



safety and product’s lifespan.
Any damages or injuries by using unapproved



items are not covered by the warranty.
In case of some model, the thin film on screen is a



part of the TV, So don’t take it off.
When attaching the stand to the TV set, place the



screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
Make sure that the screws are fastened tightly.



(If they are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not tighten the screws with too much force;



otherwise they may be damaged and come loose
later.

Optional Extras

Optional extras can be changed or modified for
quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed
manufacturer’s circumstances or policies.

(Depending upon model)

AN-MR600

Magic Remote

AG-F***DP

Dual Play
Glasses

AG-F***

Cinema 3D
Glasses

LG Audio
Device

AN-VC550

Smart Camera

AN-WF500

Wi-Fi/
Bluetooth
DONGLE

ENGLISH

*A 10 mm (0.39 inches)
*B

18 mm (0.7 inches)

7

Maintenance

Cleaning Your TV

Clean your TV regularly to keep it at peak
performance and to extend the product lifespan.

CAUTION

Make sure to turn the power off and disconnect



the power cord and all other cables first.
When the TV is left unattended or unused for a



long time, disconnect the power cord from the
wall outlet to prevent possible damage from
lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a
dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

CAUTION

Do not push, rub, or hit the surface with your



ENGLISH

fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene,



alcohol, thinners, insecticides, air fresheners,
lubricants, as these may damage the screen’s finish
and cause discoloration.
Do not spray liquid onto the surface. If water



enters the TV, it may result in fire, electric shock, or
malfunction.

Power Cord

Remove the accumulated dust or dirt on the power
cord regularly.

When holding the TV, the screen



should face away from you to
avoid damage.

Hold the top and bottom of the TV frame firmly.



Make sure not to hold the transparent part,
speaker, or speaker grille area.

Use at least two people to move a



large TV.
When transporting the TV by



hand, hold the TV as shown in the
following illustration.

When transporting the TV, do not expose the TV



to jolts or excessive vibration.
When transporting the TV, keep the TV upright;



never turn the TV on its side or tilt towards the left
or right.
When handling the TV, be careful not to damage



the protruding joystick button.

CAUTION

Avoid touching the screen at all times, as this may



result in damage to the screen.
Do not place the product on the floor with its



front facing down without padding. Failure to do
so may result in damage to the screen.
Do not move the TV by holding the cable holder



or cable management, as the cable holders may
break, and injuries and damage to the TV may
occur. (Depending upon model)

Lifting and Moving the TV

When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type and
size.

Move the TV in the box or packing material that



the TV originally came in.
Before moving or lifting the TV, disconnect the



power cord and all cables.

8

Using the Joystick Button

(Image shown may differ from your TV.)
You can operate the TV by pressing the button or

moving the joystick left, right, up, or down.

Joystick Button

Basic functions

When the TV is turned off, place
your finger on the joystick button,
press it once, and release it.

Power On

When the TV is turned on, place
your finger on the joystick button,
press it once for a few seconds,
and release it. All running apps will

Power Off

Volume Control

Channels

close.

Place your finger on the joystick
button and move it left or right to
adjust the volume level.

Place your finger on the joystick
button and move it up or down to
adjust the channel.

Control

NOTE

Move the joystick button up, down, left, or right.



Be careful not to press it. If you press it first, you
may not be able to adjust the volume or scroll
through the channels.

Adjusting the Menu

When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving the
joystick button up, down, left, or right.

Turns the power off.
Accesses the quick settings. (Depending upon

model)

Clears on-screen displays and returns to TV
viewing.

Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)

Lift and tilt the TV into its upright position on a

1

table.

- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.

10 cm

(4 inches)

10 cm

Connect the power cord to a wall outlet.

2

CAUTION

Do not place the TV near or on sources of heat, as



this may result in fire or other damage.

Using the Kensington Security
System (optional)

(Depending upon model)
(Image shown may differ from your TV.)

The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit

www.kensington.com.

security system cable between the TV and a table.

Connect the Kensington

10 cm

10 cm

http://

ENGLISH

NOTE

The Kensington security system is optional. You can



obtain additional accessories from your local dealer.

9

A

Securing the TV to a Wall (optional)

(Depending upon model)
(Image shown may differ from your TV.)

Insert and tighten the eye-bolts, or TV brackets

1

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

Mount the wall brackets with the bolts to the

2

wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

3

with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.

CAUTION

Make sure that children do not climb on or hang



ENGLISH

on the TV.

NOTE

Use a platform or cabinet that is strong and large



enough to support the TV securely.
Brackets, bolts, and ropes are optional. You can



obtain additional accessories from your local
dealer.

10 cm

(4 inches)

10 cm

10 cm

10 cm

Make sure to use screws and wall mounts that meet
the VESA standard. Standard dimensions for the wall
mount kits are described in the following table.

Model

VESA (A x B)
Standard screw
Number of screws
Wall mount bracket

(optional)

Model

VESA (A x B)
Standard screw
Number of screws
Wall mount bracket

(optional)

40/43LF6300
32LF595B
43LF5900
43LH5800

200 x 200 400 x 400
M6 M6
4 4
LSW240B

MSW240
49/55LF6300

49LF5900

300 x 300 300 x 300
M6 M6
4 4
LSW350B

MSW240

42/50/55LF6500
55LF5950

LSW440B
MSW240

60/65LF6300
60/65LF6390
65LF6350

LSW350B

Mounting on a Wall

An optional wall mount can be used with your LG
television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket
at the rear of the TV. Install the wall mount bracket
on a solid wall perpendicular to the floor. If you are
attaching the TV to other building materials, please
contact qualified personnel to install the wall mount.
Detailed instructions will be included with the wall
mount. We recommend that you use an LG brand
wall mount. The LG wall mount is easy to adjust or to
connect the cables. When you do not use LG’s wall
mount bracket, use a wall mount bracket where the
device is adequately secured to the wall with enough
space to allow connectivity to external devices. If you
are using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then attach
the TV to the mount.

10

B

CAUTION

Disconnect the power before moving or installing



the TV. Otherwise electric shock may occur.
Remove the stand before installing the TV on a



wall mount by performing the stand attachment
in reverse.
If you install the TV on a ceiling or slanted wall,



it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
Do not overtighten the screws as this may cause



damage to the TV and void your warranty.
Use the screws and wall mounts that meet the



VESA standard. Any damages or injuries by misuse
or using an improper accessory are not covered
by the warranty.

NOTE

Use the screws that are listed on the VESA



standard screw specifications.
The wall mount kit includes an installation manual



and necessary parts.
The wall mount bracket is optional. You can obtain



additional accessories from your local dealer.
The length of screws may differ depending upon



the wall mount. Make sure to use the proper
length.
For more information, refer to the manual



supplied with the wall mount.
When using the wall mounting bracket, apply



the adhesive protective label to cover the
unused stand opening(s). This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)

Provided Item

Adhesive Protective Label

When attaching a wall mounting bracket to the



TV, insert the wall mount inner spacers into the
TV wall mount holes to adjust the vertical angle
of the TV. (Use only when provided with your
particular model.)

Provided Item

Wall Mount Spacer

NOTE

If you record a TV program on a DVD recorder or



VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
The external device connections may differ from



the model.
Connect external devices to the TV regardless of



the order of the TV port.
If you connect a gaming device to the TV, use the



cable supplied with the gaming device.
Refer to the external equipment’s manual for



operating instructions.
In PC mode, there may be noise associated



with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture is
clear.
Depending upon the graphics card, some



resolution settings may not allow the image to be
positioned on the screen properly.
Some USB Hubs may not work. If a USB device



connected through a USB Hub is not detected,
connect it directly to the USB port on the TV.
Smart TV Only) The TV may be capable of



operating without a set-top from a multichannel
video programming distributor (MVPD).

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch
TV. The RF cable may not be supplied, depending
upon the model.

CAUTION

Make sure not to bend the copper wire of the RF



cable.

ENGLISH

Connections (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device’s connection,
refer to the manual provided with each device.

Copper wire

Complete all connections between devices, and



then connect the power cord to the power outlet
to prevent damage to your TV.

11

NOTE

Use a signal splitter to use 2 TVs or more.



DTV Audio Supported Codec : MPEG, Dolby



Digital.

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.

NOTE

HDMI Audio Supported Format : PCM (32 kHz /



44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
(Depending upon model)

(POWER) Turns the TV on or off.

Changes the input source.

Activates or deactivates the subtitles.

(User Guide) Sees user-guide.

Resizes an image.
Returns to the last TV channel.

Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels

selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program.

Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.

Remote Control

(Depending upon model)
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To

ENGLISH

install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution.To remove the batteries, perform the
installation actions in reverse. This remote uses
infrared light. When in use, it should be pointed in
the direction of the TV’s remote sensor.

CAUTION

Do not mix old and new batteries, as this may



damage the remote control.

A

B

Shows the previous history.

(Home) Accesses the Home menu.

Shows the list of Apps.

Accesses the quick settings.

Shows the list of Channels.

Navigation buttons Scrolls through menus or
options. (up/down/left/right)

Selects menus or options and confirms your

input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

Sets the length of time until the TV to turns off.

Enables SAP (Secondary Audio Program) Feature.

Control buttons ( , , , , ) Controls the
SIMPLINK compatible devices (USB, SIMPLINK).
Color buttons These access special functions in
some menus. ( , , , )

Magic Remote Functions

12

(Depending upon model)
When the message

is low. Change the battery.

battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities

Magic remote control battery

is displayed, replace the

and ends

of the battery may cause the battery to burst or leak,
resulting in fire, personal injury, or ambient pollution.
Be sure to point the remote control at the remote
control sensor on the TV. To remove the batteries,
perform the installation actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
remote sensor.

CAUTION

Do not mix old and new batteries, as this may



damage the remote control.

A

A

(POWER) Turns the TV on or off.

(INPUT) Changes the input source.

* Pressing and holding the (INPUT) button

displays all the lists of external inputs.

Number buttons Enters numbers.

(DASH) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.
Views the information of the current channels

and screen.

B

C

B

Adjusts the volume level.

(MUTE) Mutes all sounds.

* By pressing and holding the button, video

descriptions function will be enabled.

* (Secondary Audio Program) Feature can also be

enabled by pressing the key.

Scrolls through the saved channels.

(Home) Accesses the Home menu.
(BACK) Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

C

Wheel (OK) Press the center of the Wheel button to

select a menu. You can change channels by using the
Wheel button.

(up/down/left/right) Press the up, down,

left or right button to scroll the menu. If you press

buttons while the pointer is in use, the pointer
will disappear from the screen and Magic Remote will
operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the
left and right.

(Q. Settings) Accesses the Quick Settings.

* Pressing and holding the (Q. Settings) button

displays the Advanced menu.

(Screen remote) Displays the Screen Remote.

* Accesses the Universal Control Menu in some regions.

Used for viewing 3D video. (For 3D models)

(Voice recognition)

Network connection is required to use the voice
recognition function.

1. Press the voice recognition button.

2. Speak when the voice display window appears on the

TV screen.

* Use the Magic Remote no further than 10 cm (4 inches)

from your face.

* The voice recognition may fail when you speak too fast

or too slowly.

* The recognition rate may vary depending upon the

user’s characteristics (voice, pronunciation, intonation,
and speed) and the environment (noise and TV volume).

Activates or deactivates the subtitles.

Color buttons These access special functions in some
menus. ( Red, Green, Yellow, Blue)

ENGLISH

13

Registering Magic Remote

How to register the Magic Remote

To use the Magic Remote, first pair it
with your TV.
1 Put batteries into the Magic Remote

and turn the TV on.

2 Point the Magic Remote at your TV

and press the Wheel (OK) on the

(Wheel)

How to deregister the Magic Remote

remote control.

* If the TV fails to register the Magic

Remote, try again after turning the TV
off and back on.

Do not drop the battery. Avoid extreme shocks to



the battery.
Inserting the battery in the wrong way may result



in explosion.

Licenses

Supported licenses may differ by model. For more
information about licenses, visit

www.lg.com

.

Press the

(BACK)

(Home)

at the same time, for five seconds, to
unpair the Magic Remote with your TV.
Pressing and holding the
will let you cancel and re-register
Magic Remote at once.

How to use Magic Remote

ENGLISH

 Shake the Magic Remote slightly to

the right and left or press

(INPUT), buttons to make the

pointer appear on the screen. (In some
TV models, the pointer will appear
when you turn the Wheel button.)

 If the pointer has not been used for a

certain period of time or Magic Remote is
placed on a flat surface, then the pointer
will disappear.

 If the pointer does not move as you

wish, shake Magic Remote to the left
and right. The pointer will move to the
center of the screen.

 The Magic Remote depletes batteries

faster than a normal remote due to the
additional features.

Precautions to Take

Use the remote control within the specified



range (within 10 m, 32.8 ft.) You may experience
communication failures when using the device
outside the coverage area or if there are obstacles
within the coverage area.
You may experience communication failures



depending upon the accessories. Devices such
as a microwave oven and wireless LAN operate in
the same frequency band (2.4 GHz) as the Magic
Remote. This may cause communication failures.
The Magic Remote may not work properly if a



wireless router (AP) is within 1 m (3.28 ft) of the
TV. Your wireless router should be more than
1 m (3.28 ft) away from the TV.
Do not disassemble or heat the battery.



(BACK) and (Home)

button

(Home),

(For LF6300, LF6390,
LF6500, LF6350 series)

(For LF595B, LF5900,

LF5950, LH5800 series)

Open Source Software
Notice Information

To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to

[e-mail]

(3) years from the date on which you purchased the
product.

http://opensource.lge.com

. This offer is valid for three

.

14

Troubleshooting

Cannot control the TV with the remote control.



- Check the remote control sensor on the product
and try again.

- Check if there is any obstacle between the
product and the remote control.

- Check if the batteries are still working and
properly installed (

No image display and no sound is produced.



- Check if the product is turned on.

- Check if the power cord is connected to a wall
outlet.

- Check if there is a problem in the wall outlet by
connecting other products.

The TV turns off suddenly.



- Check the power control settings. The power
supply may be interrupted.

- Check if the Sleep Timer/Timer Power off is
activated in the Timers settings.

- If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.

to

, to

)

Specifications

Product specifications may be changed without
prior notice due to upgrade of product functions.

Television System

NTSC-M, ATSC, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV
1-135

External Antenna Impedance

75 Ω

Environment Condition

Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %

Wireless Module Specifications

(For LF595B, LF5900, LF5950, LH5800 series)

Wireless Module (WN8122E1) Specification
Standard IEEE802.11a/b/g/n

Frequency Range

Output Power
(Max.)

 Because band channel used by the country could

be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.

 This device should be installed and operated with

minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase is for
the general statement for consideration of user
environment.

 Contains FCC ID: BEJWN8122E1

Contains IC: 2703H-WN8122E1

(For LF6300, LF6390, LF6500, LF6350 series)

Wireless module (LGSBW41) Specifications

Standard IEEE 802.11a/b/g/n Bluetooth Version 4.0

Frequency
Range

Output
Power
(Max.)

 Because band channel used by the country could

be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.

 This device should be installed and operated with

minimum distance 20 cm (7.8 inches) between
the device and your body. And this phrase is for
the general statement for consideration of user
environment.

 Contains FCC ID: BEJLGSBW41

Contains IC: 2703H-LGSBW41

2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz

802.11a : 16.5 dBm

802.11b : 16 dBm

802.11g : 15.5 dBm

802.11n - 2.4 GHz : 15.5 dBm

802.11n - 5 GHz: 16.5 dBm

Wireless LAN Bluetooth

2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz

802.11a: 11.5 dBm

802.11b: 11 dBm

802.11g: 10.5 dBm

802.11n - 2.4 GHz:
11 dBm

802.11n - 5 GHz:

12.5 dBm

2400 to 2483.5 MHz

10 dBm or Lower

External Control Device
Setup

ENGLISH

To obtain the external control device setup
information, please visit

www.lg.com

.

15

MODELS

Dimensions
(W x H x D)

Weight

Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power

consumption

Dimensions
(W x H x D)

Weight

ENGLISH

Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power

consumption

Dimensions
(W x H x D)

Weight

Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power

consumption

With stand

Without stand

With stand 9.6 kg (21.1 Ibs) 12.7 kg (27.9 Ibs) 17.6 kg (38.8 Ibs)
Without stand 7.5 kg (16.5 Ibs) 10.2 kg (22.4 Ibs) 14.4 kg (31.7 Ibs)

MODELS

With stand

Without stand

With stand 20.9 kg (46.0 Ibs) 29.3 kg (64.5 Ibs) 34 kg (74.9 Ibs)
Without stand 17.7 kg (39.0 Ibs) 24.1 kg (53.1 Ibs) 28.8 kg (63.4 Ibs)

MODELS

With stand

Without stand

With stand 9.9 kg (21.8 Ibs) 14.7 kg (32.4 Ibs) 18.7 kg (41.2 Ibs)
Without stand 9.6 kg (21.1 Ibs) 14.3 kg (31.5 Ibs) 18.3 kg (40.3 Ibs)

40LF6300

(40LF6300-UA)

911 x 581 x 189 (mm)

35.8 x 22.8 x 7.4
(inches)

911 x 528 x 55.3 (mm)

35.8 x 20.7 x 2.1
(inches)

0.9 A / 90 W 1.0 A / 100 W 1.2 A / 120 W

55LF6300

(55LF6300-UA)

1,242 x 774 x 220 (mm)

48.8 x 30.4 x 8.6
(inches)

1,242 x 724 x 37 (mm)

48.8 x 28.5 x 1.4
(inches)

1.3 A / 130 W 1.5 A / 150 W 1.6 A / 160 W

42LF6500

(42LF6500-UB)

960 x 610 x 218 (mm)

37.7 x 24.0 x 8.5 (inches)
960 x 567 x 54.5 (mm)

37.7 x 22.3 x 2.1 (inches)

1.0 A / 100 W 1.2 A / 120 W 1.3 A / 130 W

(43LF6300-UA)

973 x 625 x 193 (mm)

38.3 x 24.6 x 7.5

973 x 573 x 37 (mm)

38.3 x 22.5 x 1.4

(60LF6300-UA)

(60LF6390-UA)

1,363 x 844 x 294 (mm)

53.6 x 33.2 x 11.5

1,363 x 792 x 39 (mm)

53.6 x 31.1 x 1.5

(50LF6500-UB)

1,127 x 710 x 247 (mm)

44.3 x 27.9 x 9.7 (inches)
1,127 x 660 x 54.5 (mm)

44.3 x 25.9 x 2.1 (inches)

43LF6300

(inches)

(inches)

60LF6300

60LF6390

(inches)

(inches)

50LF6500

49LF6300

(49LF6300-UA)

1,106 x 697.5 x 220 (mm)

43.5 x 27.4 x 8.6
(inches)

1,106 x 647 x 37 (mm)

43.5 x 25.4 x 1.4
(inches)

65LF6300

(65LF6300-UA)

65LF6390

(65LF6390-UA)

65LF6350

(65LF6350-UA)

1,461 x 899 x 294 (mm)

57.5 x 35.3 x 11.5
(inches)

1,461 x 848 x 39 (mm)

57.5 x 33.3 x 1.5
(inches)

55LF6500

(55LF6500-UB)

1,241 x 772 x 247 (mm)

48.8 x 30.3 x 9.7 (inches)
1,241 x 725 x 55.5 (mm)

48.8 x 28.5 x 2.1 (inches)

16

43LF5900

MODELS

Dimensions
(W x H x D)

Weight

Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power

consumption

Dimensions
(W x H x D)

Weight

Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current Value / Power

consumption

With stand

Without stand

With stand 6.2 kg (13.6 Ibs) 9.8 kg (21.6 Ibs) 13.4 kg (29.5 Ibs)
Without stand 6.0 kg (13.2 Ibs) 9.5 kg (20.9 Ibs) 13.1 kg (28.8 Ibs)

MODELS

With stand

Without stand

With stand 17.7 kg (39.0 Ibs)
Without stand 17.3 kg (38.1 Ibs)

32LF595B

(32LF595B-UB)

732 x 481 x 207 (mm)

28.8 x 18.9 x 8.1
(inches)

732 x 437 x 55.5 (mm)

28.8 x 17.2 x 2.1
(inches)

1.1 A / 65 W 1.1 A / 65 W 0.75 A / 75 W

55LF5950

(55LF5950-UB)

1,243 x 772 x 247 (mm)

48.9 x 30.3 x 9.7
(inches)

1,243 x 725 x 56.8 (mm)

48.9 x 28.5 x 2.2
(inches)

1.3 A / 130 W

(43LF5900-UB)

43LH5800

(43LH5800-UD)

971 x 624 x 198 (mm)

38.2 x 24.5 x 7.7
(inches)

971 x 575 x 58.7 (mm)

38.2 x 22.6 x 2.3
(inches)

49LF5900

(49LF5900-UB)

1,103 x 698 x 198 (mm)

43.4 x 27.4 x 7.7
(inches)

1,103 x 650 x 58.7 (mm)

43.4 x 25.5 x 2.3
(inches)

ENGLISH

17

The model and serial number of the TV are located on the
back and one side of the TV.
Record them below should you ever need service.

MODEL
SERIAL

OWNER’S MANUAL

EXTERNAL CONTROL
DEVICE SETUP

Please read this manual carefully before operating the set and retain it for
future reference.

www.lg.com

KEY CODES

2

2

ENGLISH

ENG

KEY CODES

• This feature is not available for all models.

Code

(Hexa)

00 CH +, PR + R/C Button 53 List R/C Button

01 CH -, PR - R/C Button 5B Exit R/C Button

02 Volume + R/C Button 60 PIP(AD) R/C Button

03 Volume - R/C Button 61 Blue R/C Button

06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button

07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button

08 Power R/C Button 72 Red R/C Button

09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button

0B Input R/C Button 91 AD (Audio Description) R/C Button

0E SLEEP R/C Button 7A User Guide R/C Button

0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button

10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button

1A Q.View / Flashback R/C Button 8E ►► (Forward) R/C Button

Function Note

Code

(Hexa)

Function Note

1E FAV (Favorite Channel) R/C Button 8F ◄◄ (Rewind) R/C Button

20 Text (Teletext) R/C Button AA Info R/C Button

21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button

28 Return (BACK) R/C Button B0 ► (Play) R/C Button

30 AV (Audio / Video) Mode R/C Button B1

39 Caption/Subtitle R/C Button BA

40 Λ

41

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 99 AutoConfig R/C Button

44 OK / Enter R/C Button 9F App / * R/C Button

45 Q.Menu R/C Button

4C List, - (ATSC Only) R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

(Arrow Key / Cursor Up)

V (Arrow Key / Cursor

Down)

R/C Button BB Soccer R/C Button

R/C Button BD

ꕗ (Stop / File List)

ꕘ (Freeze / Slow Play /

Pause)

ꔄ (REC)

R/C Button

R/C Button

R/C Button

EXTERNAL CONTROL DEVICE SETUP

USB IN

(TV)

(PC)

3

3

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity.
* Cable is not provided.

USB to Serial converter with USB Cable

USB Type

(PC)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter

which is not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

USB IN

RS-232C With RS232C Cable

DE9 (D-Sub 9pin) Type

• You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required

for the connection between the PC and the TV, which is specified in the manual.

(TV)

ENGENGLISH

(PC)

The connection interface may differ from your TV.

(CONTROL & SERVICE)

RS-232C IN

(TV)