LG 65LB5200 Owner’s Manual

Life's Good

{i!ii_iii!!_:

xx _i_i_i,_

}i_ili_iIJ

XED TV _

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operatin 9 your TV
and retain it for future reference.

32LB52QB 6QLB520Q

65LB52QQ

I 0773=CE360000=L202 I

wwwJg.com

2 IMPORTANT SAFETY INSTR JCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product.

Read these instructions.
Keep these instructions.

Heed all warnings.
Follow all instructions.

TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

_1 The lightning flash with arrowhead

symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated dangerous voltage within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

_t_ The exclamation point within an

equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

WARNING/CAUTION

-TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.

_'\ CAUTION

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

@ NOTE

The note helps you understand and use
the product safely. Please read the note
carefully before using the product.

WARNING: This product contains chemicals

known to the State of California to cause
cancer and birth defects or other reproductive

harm. Wash hands after handling.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not btock any ventilation openings. Install
in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
ptug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ
by country).

• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.

IMPORTANT SAFETY INSTR JCTIONS 3

• Only use attachments/accessories specified
by the manufacturer.

• Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms
or when unused for long periods of time.

• Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

CAUTION concerning the Power Cord

(Can differ by country):
It is recommended that appliances be

placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that

appliance and has no additional outlets or
branch circuits. Check the specification page

of this owner's manual to be certain. Do not
connect too many appliances to the same

AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.

Overloaded watl outlets, loose or damaged
walt outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could

result in electric shock or fire. Periodically
examine the cord of your appliance, and

if its appearance indicates damage or
deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced
with an exact replacement part by an

authorized service. Protect the power cord
from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the ptug when unplugging the
power cord. Do not pull on the power cord to

unplug the TV.

• Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil

or pen, or make a scratch on it.

• Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.

• Keep the packing anti-moisture material

or vinyl packing out of the reach of

children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake,

induce vomiting and go to the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of

children.

• Warning - To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install
this product near flammable objects such

as gasoline or candles, or expose the TV to
direct air conditioning.

• Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

4 IMPORTANT SAFETY INSTR JCTIONS

• Grounding
(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong

grounded AC outlet). If grounding methods
are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC

power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Unauthorized modification
could void the user's authority to operate this

product.

• Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light
or power circuits, or where it can come in

contact with such power lines or circuits as
death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of
the National Electrical Code (NEC)in the

U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSl/NFPA 70

(NEe Section 810-20)

Grounding Conductor

Groun C Power Service Grounding

NEC= National Electrical Code (NEe Art 250, Part H)

(NEe Section 810-21)

Electrode System

• Cleaning
When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent
scratching. Do not spray water or other

liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such

as alcohol, thinners, or benzine.

• Moving
Make sure the product is turned off,

unplugged, and all cables have been
removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress
on the front panel of the TV.

• Ventilation
Install your TV where there is proper

ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product

with cloth or other materials while plugged.
Do not install in excessively dusty places.

• If you smell smoke or other odors coming
from the TV, unplug the power cord and

contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during
a lightning storm.

• When mounting a TV on the walt, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to
falt into the product, and do not drop anything

onto the screen.

• DISCONNECTING DEVICE FROM THE MAIN
POWER

Mains ptug is the disconnecting device. The
ptug must remain readily operable.

• Store the accessories (battery, etc.) in a safe
location out of the reach of children.

• This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.

• The batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as

sunshine, fire or the like.

• [] This equipment is a Class Itor double

insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.

• Dot Defect
The panel is a high technology product with
resolution of two miliion to six million pixets.

In a very few cases, you could see fine dots
on the screen while you're viewing the TV.

Those dots are deactivated pixets and do not
affect the performance and reliability of the

TV.

• Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is

generated by plastic thermal contraction
due to temperature and humidity. This noise

is common for products where thermal
deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a
high-speed switching circuit, which supplies a

large amount of current to operate a product.
It varies depending upon the product.

This generated sound does not affect the
performance and reliability of the product.

• Take care not to touch the ventilation
openings. When watching the TV for a long
period, the ventilation openings may become

hot. This does not affect the performance of
the product or cause defects in the product.

• Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.

• If the TV feels cotd to the touch, there may
be a small flicker when it is turned on. This

is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV's performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary

distortion effects on the screen.

IMPORTANT SAFETY INSTRUCTIONS 5

• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on

the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more

hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.

6 IMPORTANT SAFETY INSTRUCTIONS

f

For USA and Canada

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device. Any
changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.

I

This reminder is provided to call the CATV system installer's attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.

f

For USA

LG Electronics offers a customized e-waste take-back and recycling service that meets local

needs and requirements in the countries where e-waste regulations are in place, and also provides
product and packaging take-back and recycling service voluntarily in some countries. LG Electronics

evaluates products' recyclabitity at the design step using LG's recyclability evaluation tool, with the
goal of improving recyclability where practicable. Through these activities, LG seeks to contribute

to conserving natural resources and protecting the environment.

For more information about the LG Recycling Policy, please visit our global site at

http://www.lg.com/gtobat/sustainabitity/environment/take-back-recycling

I C TNSES 7

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www./g.com.

DOLB_ Manufactured under license from Dolby Laboratories.

DIGITAL Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

H_IrlI_ _ logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

.............................. States and other countries.

/

.!@ NOTE ...............................................................................................................................................................................................................................................................................................................................................................................................................................................

image shown may differ from your TV.

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product modet that you are

using.

New features may be added to this TV in the future.

8 ASSEMBL NG AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items, if there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

Remote Control, Batteries Owner's Manual

(AAA)

Stand Base

(For 60LB5200 and reference
for 65LB5200.)

Component Adapter Cable

(For 60LB5200 / 65LB5200)

Stand Screws
M4 x 10 (4pcs)

(For 60LB5200)

Stand Holder

(For 32LB520B)

Power Cord

(For 60LB5200)

Stand Screws

M6 x 14 (4pcs)

(For 65LB5200)

Stand Holder Cover

(For 32LB520B)

[]

Stand Base

(For 32LB520B)

BT, 4 x18
(4pcs)

Stand Screws

(For 32LB520B)

BA, 3.5 x 16
(2pcs)

Wall Mount Spacer (2pcs)

(For 65LB5200)

ASSFMBLNGANDPI_['PA[:NG 9

__"\ CAUTION

Do not use any unapproved items to ensure the safety and product's lifespan.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some m.odets appear to have a thin film on the screen, It is actually part of the screen; do not
remove it.

.....@ NOTE

•The items suppliedwithyour productmay varydepending upon the _
model.

• Productspecificationsorcontentsof thismanual may be changed
withoutpriornoticedue to upgrade ofproductfunctions.

• Foran optimalconnection,HDMI cablesand USB devicesshould

havebezelslessthan 10 mm (0.39inches)thickand 18 mm ..........

(0,7 inches) width, _A _-<10 mm (0.39 inches)

• Use an extension cable that supports USB 2.0 if the USB cable or _B_-<18 mm (0_7 inches)

USB flash drive does not fit into your TV's USB port.

/