LG 60PZ570T Owner's Manual

OWNER’S MANUAL

LED LCD TV / LCD TV / PLASMA TV

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ENGLISH

ENG

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content.”

“DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

 Image shown may differ from your TV.  Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.  The available menus and options may differ from the input source or product model that you are using.

LICENSES

ENGENGLISH

TABLE OF CONTENTS

ENGLISH

ENG

2 LICENSES

6 ASSEMBLING AND PREPARING

6 Unpacking 10 Separate purchase 11 Parts and buttons 16 Lifting and moving the TV 16 Setting up the TV 16 - Attaching the stand 19 - Not using the Desk-Type stand 20 - Mounting on a table 22 - Mounting on a wall 23 - Tidying cables

24 REMOTE CONTROL

27 Magic Motion Remote Control Functions 28 - Registering Magic Motion remote control 28 - How to use Magic Motion Remote Control 28 - Precautions to Take when Using the

Magic Motion Remote Control

29 WATCHING TV

29 Connecting to an antenna 29 - Connecting an antenna 29 - Connecting with a satellite dish 30 Turning the TV on for the first time 30 Watching TV 31 Accessing the Home menu 32 Managing programmes 32 - Automatically setting up programme 35 - Cable DTV Setting 35 - Satellite DTV Setting 36 - Tivu Programme List Update 37 - Manually setting up programme (In

digital mode)

38 - Manually setting up programme (In

analogue mode) 40 - Editing your programme list 41 - Booster 41 - Using favourite programmes 41 - CI [Common interface] Information 42 Using additional options 42 - Adjusting aspect ratio 43 - Changing AV modes 44 - Using the input list 45 Using the Quick menu

46 ENTERTAINMENT

46 Network Connection 46 - Connecting to a wired network 47 - Connecting to a wireless network 49 - When a security code is already set 52 - Network Status 53 Premium Account Function 53 - Notice 55 LG Apps Function 55 - Registration LG Apps 56 - Sign in with your LG Apps account 57 - Using LG Apps 58 - Using My Apps 59 Web Browser Function 59 - Using Web Browser 60 - Browsing Favourite Websites 61 - Browsing Websites by Directly Entering

Address 61 - Viewing Visited Website List 62 Smart Share Function 62 - Connecting USB storage devices 63 - Connecting DLNA DMP (Digital Living

Network Alliance, Digital Media Player) 66 - Connecting DLNA DMR (Digital Living

Network Alliance, Digital Media Render) 67 - Browsing files 68 - Viewing Videos 71 - DivX® VOD Guide 72 - Viewing Photos 74 - Listening to music 76 Media Link Function 76 - Media Link Connection 77 - Using Media Link 77 - Viewing Movies 78 - Using Music Section 78 - Using TV Programme Section 79 - Installing Plug-Ins 80 DVR Function 80 - Precautions when using the USB Device 81 - Timeshift (PAUSE & REPLAY OF LIVE

TV) 84 - Recording 85 - Schedule 88 - Recorded TV 91 EPG (Electronic Programme Guide)

Function (In digital mode) 91 - Switch on/off EPG 91 - Select a programme 92 - NOW/NEXT Guide Mode 92 - 8 Day Guide Mode 92 - Date Change Mode 92 - Extended Description Box

TABLE OF CONTENTS

93 3D IMAGING

93 3D Technology 94 When using 3D Glasses 94 3D Imaging Viewing Range 95 Viewing 3D Imaging 95 - Setting 3D Imaging

97 CUSTOMIZING TV SETTINGS

97 The SETUP Menu 98 Customizing Settings 98 - SETUP Settings 99 - PICTURE Settings 104 - AUDIO Settings 107 - TIME Settings 109 - LOCK Settings 110 - OPTION Settings 113 - NETWORK Settings 114 - SUPPORT Settings

115 MAKING CONNECTIONS

116 Connection Overview 117 Connecting to a HD receiver, DVD, or

VCR player 117 - HDMI Connection 117 - DVI to HDMI Connection 118 - Component Connection 118 - Euro Scart Connection 119 - Composite Connection 119 Connecting to a PC 120 - HDMI Connection 120 - DVI to HDMI Connection 121 - RGB Connection 122 Connecting to an Audio System 122 - Digital Optical Audio Connection 122 Connecting to Headphone Connection 123 Connecting to a USB 123 Connecting to a CI Module 124 Connecting the Wireless Media Box 124 SIMPLINK Connection 125 - Activating and Using the SIMPLINK

menus

126 TELETEXT

126 Switch On/Off 126 Simple Text 126 - Page selection 126 Top Text 126 - Block / Group / Page Selection 126 - Direct Page Selection 127 Fastext 127 - Page selection 127 Special Teletext Function

128 DIGITAL TELETEXT

128 Teletext within digital service 128 Teletext in digital service

129 MAINTENANCE

129 Updating the TV Firmware 130 Cleaning Your TV 130 - Screen and frame 130 - Cabinet and stand 130 - Power cord 131 Preventing “Image burn” or “Burn-in” on

your TV screen

132 TROUBLESHOOTING

134 SPECIFICATIONS

145 IR CODES

146 EXTERNAL CONTROL DEVICE

SETUP

146 RS-232C Setup 146 Type of connector;

D-Sub 9-Pin Male 147 RS-232C Configurations 148 Communication Parameters 148 Command reference list 149 Transmission / Receiving Protocol

ENGENGLISH

155 OPEN SOURCE LICENSE

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

ENGLISH

ENG

Remote control and batteries

(AAA)

Polishing cloth1

(Depending on model)

1 Gently wipe the spots on the cabinet with the polishing cloth.

2 Wipe spots on the exterior only with the cleaning cloths.

Do not wipe roughly when removing stains. Excessive pressure may cause scratches or discolouration. For cleaning front frame, please slowly wipe in one direction after spraying water 1-2 times on cleaning cloths. Please remove excessive moisture after cleaning. Excessive moisture may cause water stains on the frame.

Nero MediaHome 4 Essentials CD

Cleaning cloths (Mitt)

(Depending on model)

Owner’s manual

Water

Ferrite core

(Depending on model)

ASSEMBLING AND PREPARING

Only 32/37/42/47LV37**, 32/37/42/47LV47**, 32/42/47/55LW47

x 8

M4 x 12

Screw for assembly Cable holder

(Depending on model)

Screw for fixing

(Only 32/37LV37**,

32/37LV47**, 32LW47**)

Only 47LK95

x 8

M4 x 20

Screw for assembly Protection cover FPR 3D glasses

FPR 3D glasses

(Only 32/42/47/55LW47**)

Power cord

ENGENGLISH

1 The number of 3D glasses may differ depending on the country.

ASSEMBLING AND PREPARING

ENGLISH

ENG

Only 50/60PZ57**, 50/60PZ75**, 50/60PZ95

x 4

M4 x 26 M5x14.5

Only 50PZ57**, 50PZ75**, 50PZ95

Protection cover Protection cover

x 3

Screw for assembly

tape

x 4

M4 x 28

Only 60PZ57

x 3

M5 x 24

Cable holder Power cord holder

Only 60PZ75**, 60PZ95

x 4

M4 x 28

M5x14.5

x 4

Power cord

3D glasses

(AG-S250)

Magic Motion remote

control, Strap, Batteries (AA)

(Only 50/60PZ95**)

Wireless LAN for Broad-

band/DLNA Adaptor

(AN-WF100)

(Only 50/60PZ95**)

ASSEMBLING AND PREPARING

CAUTION

 Do not use any unapproved items to ensure the safety and product life span.  Any damages or injuries by using unapproved items are not covered by the warranty.

NOTE

The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to upgrade



of product functions. How to use the ferrite core (Only Plasma TV)



1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core three times. Place the ferrite core close to the TV.

[to an External device]

10 mm(+ / - 5 mm)

[to the TV]

[Figure 1]

2 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug]

(1)

3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable.

Wind the LAN cable once on the small ferrite core and three times on the big ferrite core. Place the ferrite core close to the TV.

[to an

External

device]

- If there are two ferrite cores, follow as shown in Figures 3(1).

- If there are three ferrite cores, follow as shown in Figures 1 and 3(1).

- If there are four ferrite cores, follow as shown in Figures 2(1) and 3(2).

- If there are six ferrite cores, follow as shown in Figures 1, 2(2) and 3(2).

 For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick

and 18 mm width. (Only 32/37/42/47LV37**, 32/37/42/47LV47**, 32/42/47/55LW47**)

(2)

[Figure 2]

A B

(1)

(2)

[Figure 3]

[to the TV]

(Gray)

[Cross Section of

Ferrite Core]

(Black)

[Cross Section of

Ferrite Core]

A (Gray) B (Gray)

[Cross Section of

Ferrite Core]

ENGENGLISH

*A 10 mm *B 18 mm

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with compatible LG LED LCD TV, LCD TV or Plasma TV.

ENGLISH

ENG

Wireless Media Box

(AN-WL100E, AN-WL100ET)

(Only 50/60PZ75**, 50/60PZ95**)

Magic Motion remote control

(AN-MR200)

3D glasses

(AG-S230, AG-S250, AG-S270)

(Only 50/60PZ57**, 50/60PZ75**,

50/60PZ95**)

Wireless LAN for Broadband/

DLNA Adaptor

(AN-WF100)

(Only 32/37/42/47LV37**,

32/37/42/47LV47**,

32/42/47/55LW47**, 47LK95**,

50/60PZ75**)

FPR 3D glasses

(AG-F2**)

(Only 32/42/47/55LW47**,

47LK95**)

LG USB for VOD

(AN-UM200)

(Only France)

Video Call Camera

(AN-VC300)

(Depending on model)

1 The model name or design may be changed depending on the upgrade of product functions,

manufacturer's circumstances or policies.

2 Video Call Camera can be used with some LG TVs.

Video Call Camera is not available in every country.

ASSEMBLING AND PREPARING

Parts and buttons

Image shown may differ from your TV.



NOTE

The TV can be placed in standby mode in order to reduce the power consumption and the TV should



be turned off if it will not be watched for some time, as this will reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

CAUTION

 Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from

fragments of glass, or the TV may fall.

 Do not drag the TV. The floor or the product may be damaged.  Some models have a thin film attached on to the screen and this must not be removed.

ENGENGLISH

ASSEMBLING AND PREPARING

Only 32/37/42/47LV37**, 32/37/42/47LV47**, 32/42/47/55LW47

Side connection panel

ENGLISH

ENG

Screen

Speakers

Remote control and intelligent1 sensors

Power Indicator

Touch buttons

Rear connection panel (See p.115)

Only 32/37/42/47LV375G, 32/37/42/47LV375S, 32/37/42/47LV370S, 32/37/42/47LV470S, 32/42/47/55LW470S

Touch button

Turns the power on or off.

Changes the input source.

Accesses the Home menu, or saves your input and exits the menus.

Selects the highlighted menu option or confirms an input.

Adjusts the volume level.

Scrolls through the saved programmes.

Description

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

 You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.

ASSEMBLING AND PREPARING

Only 47LK95

Side connection panel

LAN

H/P

USB IN

/DVI

USB Apps

IN 3

IN 2

IN 1 (ARC)

COMPONENT

VIDEO

AUDIO

AUDIO IN

OPTICAL DIGITAL

AUDIO OUT

L R

(RGB/DVI)

VIDEO

L/MONO R

AUDIO

Screen

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

AV IN 2

13/18V

700mA Max

LNB IN

Satellite

Speakers

ANTENNA

HOME

INPUT

Buttons

Remote control and intelligent1 sensors

Power Indicator

Rear connection panel (See p.115)

ENGENGLISH

Button

Description

Turns the power on or off.

Changes the input source.

Accesses the Home menu, or saves your input and exits the menus.

Selects the highlighted menu option or confirms an input.

Adjusts the volume level.

Scrolls through the saved programmes.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

 You can set the power indicator light to on or off by selecting OPTION in the Home menu - SETUP.

ASSEMBLING AND PREPARING

Side connection panel

ENGLISH

ENG

Rear connection panel (See p.115)

Only 50/60PZ57

Screen

Remote control and intelligent1 sensors

Power Indicator

Speakers

Touch buttons

Only 50/60PZ570G, 50/60PZ570S, 50/60PZ575S

Touch button

Turns the power on or off.

Changes the input source.

Accesses the Home menu, or saves your input and exits the menus.

Selects the highlighted menu option or confirms an input.

Adjusts the volume level.

Scrolls through the saved programmes.

Description

ASSEMBLING AND PREPARING

Only 50/60PZ75**, 50/60PZ95

Side connection panel

Rear connection panel (See p.115)

Screen

Remote control and intelligent1 sensors

Power Indicator

Speakers

Touch buttons

ENGENGLISH

Only 50/60PZ750G, 50/60PZ750S, 50/60PZ755S, 50/60PZ950G, 50/60PZ950S, 50/60PZ955S

Touch button

Turns the power on or off.

Changes the input source.

Accesses the Home menu, or saves your input and exits the menus.

Selects the highlighted menu option or confirms an input.

Adjusts the volume level.

Scrolls through the saved programmes.

Description

ASSEMBLING AND PREPARING

ENGLISH

ENG

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

 Avoid touching the screen at all times, as

this may result in damage to the screen.

It is recommended to move the TV in the box



or packing material that the TV originally came in. Before moving or lifting the TV, disconnect the



power cord and all cables. When holding the TV, the screen should face



away from you to avoid damage.

Hold the top and bottom of the TV frame firmly.



Make sure not to hold the transparent part, speaker, or speaker grill area.

Setting up the TV

Put your TV on a pedestal stand and mount the TV on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

Only 32/37/42/47LV37**, 32/37/42/47LV47**, 32/42/47/55LW47

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth on



the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Model Screw for

assembly

32/37/42/47LV37 32/37/42/47LV47 32/42/47/55LW47

M4 x 12 4

Number of screws

When transporting a large TV, there should be



at least 2 people. When transporting the TV by hand, hold the



TV as shown in the following illustration.

When transporting the TV, do not expose the



TV to jolts or excessive vibration. When transporting the TV, keep the TV



upright, never turn the TV on its side or tilt towards the left or right.

Stand Body

Stand Base

ASSEMBLING AND PREPARING

Assemble the TV as shown.

4 Secure the TV and the stand with the 4 screws.

Model Screw for

assembly

32/37/42/47LV37 32/37/42/47LV47 32/42/47/55LW47

M4 x 12 4

Number of screws

Only 47LK95

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth on



the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Model Screw for

assembly

47LK95

M4 x 20 4

Number of screws

Stand Body

ENGENGLISH

CAUTION

 Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

Stand Base

3 Secure the TV and the stand with the 4 screws.

Model Screw for

assembly

47LK95

M4 x 20 4

CAUTION

 Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

Number of screws

ASSEMBLING AND PREPARING

ENGLISH

ENG

Only 50/60PZ57

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth



on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Model Screw for

50PZ57 60PZ57

** **

assembly

M5 x 14.5 3 M5 x 24 3

Number of screws

Stand Body

Only 50/60PZ75**, 50/60PZ95

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth



on the surface to protect the screen from damage. Make sure no objects press against the screen.

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Model Screw for

50PZ75 50PZ95 60PZ75 60PZ95

** ** ** **

assembly

M5x14.5 3

M5x14.5 4

Number of screws

Stand Body

Stand Base

3 Secure the TV and the stand with the 4 screws.

Model Screw for

50PZ57 60PZ57

** **

assembly

M4 x 26 4 M4 x 28 4

CAUTION

 Tighten the screws firmly to prevent

the TV from tilting forward. Do not over tighten.

Number of screws

Stand Base

Stand Body

Stand Base

ASSEMBLING AND PREPARING

3 Secure the TV and the stand with the 4 screws.

Model Screw for

50PZ75 50PZ95 60PZ75 60PZ95

** ** ** **

assembly

M4 x 26 4

M4 x 28 4

CAUTION

 Tighten the screws firmly to prevent

the TV from tilting forward. Do not over tighten.

Number of screws

Not using the Desk-Type stand

Only 47LK95

When installing the wall mounting bracket, use the Protection cover. This will protect the opening from accumulating dust and dirt.

Push the supplied protection cover into the



opening at the bottom of the TV until it locks in place.

Only 50/60PZ57**, 50/60PZ75**, 50/60PZ95

When installing the wall mounting bracket, use the protection cover. This will protect the opening from accumulating dust and dirt.

Push the supplied protection cover into the



opening at the bottom of the TV until it locks in place. Attach the protection cover tape.



Protection cover

ENGENGLISH

Protection cover tape

Protection cover

ASSEMBLING AND PREPARING

ENGLISH

ENG

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Connect the power cord to a wall outlet.

CAUTION

 Do not place the TV near or on sources of

heat, as this may result in fire or other damage.

10 cm

Securing the TV to a table

Only 32/37LV37**, 32/37LV47**, 32LW47

Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.

WARNING

 To prevent the TV from falling over, the TV

should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

NOTE

 Swivel 20 degrees to the left or right and adjust

the angle of the TV to suit your view.

ASSEMBLING AND PREPARING

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

Using the Kensington security system

(This feature is not available for all models.)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

ENGENGLISH

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope. Make sure to keep the rope horizontal with the

flat surface.

CAUTION

 Make sure that children do not climb on

or hang on the TV.

NOTE

 Use a platform or cabinet that is strong

and large enough to support the TV securely.

ASSEMBLING AND PREPARING

ENGLISH

ENG

Mounting on a wall

Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer.

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Separate purchase(Wall Mounting Bracket)

Model 32LV37

VESA (A x B) 200 x 100 200 x 200 Standard screw M4 M6 Number of screws 4 4 Wall mount bracket

32LV47

32LW47

LSW100B, LSW100BG

37LV37

37LV47

47LK95

LSW200B, LSW200BG

Model 50PZ57

VESA (A x B) 400 x 400 600 x 400 Standard screw M6 M8 Number of screws 4 4 Wall mount

bracket

50PZ75

50PZ95

PSW400B, PSW400BG

60PZ57

60PZ75

60PZ95

PSW600B, PSW600BG

CAUTION

 Disconnect the power first, and then move or

install the TV. Otherwise electric shock may occur.

 If you install the TV on a ceiling or slanted

wall, it may fall and result in injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel.

 Do not over tighten the screws as this may

cause damage to the TV and void your warranty.

 Use the screws and wall mount bracket that

meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

Model 42/47LV37

42/47LV47

VESA (A x B) 400 x 400 Standard screw M6 Number of screws 4 Wall mount bracket

42/47/55LW47

LSW400B, LSW400BG

** **

NOTE

 Use the screws that are listed on the VESA

standard screw specifications.

 The wall mount kit includes an installation

manual and necessary parts.

 The length of screws may differ depending

on the wall mount. Make sure to use the proper length.

 For more information, refer to the manual

supplied with the wall mount bracket.

ASSEMBLING AND PREPARING

Tidying cables

Only 32/37/42/47LV37**, 32/37/42/47LV47**, 32/42/47/55LW47

1 Gather and bind the cables with the Cable

Holder on the TV back cover.

Only 47LK95

Gather and bind the cables with the cable

management clip.

Fix the cable management clip firmly to the TV.

Only 50/60PZ57**, 50/60PZ75**, 50/60PZ95

1 Install the Power Cord Holder and Power

Cord. It will help prevent the power cable from

being removed by accident.

Power Cord Holder

2 Gather and bind the cables with the Cable

Holder. Install the LAN cable as shown to

reduce the electromagnetic wave.

ENGENGLISH

Cable Management Clip

NOTE

Do not move the TV by holding the cable



management clip, as the cable management clip may break, and injuries and damage to the TV may occur.

Cable Holder

CAUTION

 Do not move the TV by holding the Cable

Holder & Power Cord Holder, as the

Cable holders may break, and injuries and damage to the TV may occur.

ENGLISH

ENG

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.

To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.



(POWER) Turns the TV on or off. LIGHT Illuminates the remote control buttons. ENERGY SAVING (See p.99) Adjusts the brightness of the screen to reduce energy consumption. AV MODE (See p.43) Selects an AV mode. INPUT (See p.44) Changes the input source; Turns the TV on.

TV/RAD

Selects Radio, TV and DTV programme.

Alphanumeric buttons

Enters letters and numbers. LIST (See p.40) Accesses the saved programme list.

]

(Space)

Opens an empty space on the screen keyboard.

Q.VIEW

Returns to the previously viewed programme.

REMOTE CONTROL

AV MODE

LIGHT

INPUT

TV/ RAD

ENERGY

SAVING

.,;@2 abc3 def

ghi5 jkl6

mno

pqrs8 tuv

[

wxyz

BACK

EXIT

LIST

Q.VIEW

Premium

Home

Q.MENU

GUID E

FAV

RATIO

MUTE

MARK

DELETE

CHAR/NUM

P A G E

SMART TV

3D OPTION

+ -

Adjusts the volume level.

MARK

Selects a menu or option.

FAV (See p.41) Accesses your favourite programme list.

CHAR/NUM

Switches between Letter and Number input modes.

3D (Only 3D models) (See p.93) Uses for viewing 3D video.

RATIO (See p.42) Resizes an image.

DELETE Deletes letters and numbers.

MUTE

Mutes all sounds.

Scrolls through the saved programmes.

PAGE

Moves to the previous or next screen.

Premium

Accesses the Premium menus.

Home Accesses the Home menu.

ENGENGLISH

Q. MENU (See p.45)

Accesses the Quick menus.

3D OPTION (Only 3D models) (See p.93) Used for viewing 3D video.

Direct access to your internet portal of entertainment and news services developed by Orange. (Only France)

Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

BACK

Returns to the previous level.

GUIDE

Shows programme guide.

EXIT

Clears all on-screen displays and return to TV viewing.

ENGLISH

AV MODE

INPUT

TV/ RAD

ENERGY

SAVING

.,;@2 abc3 def

ghi5 jkl6

mno

pqrs8 tuv

[

wxyz

BACK

EXIT

LIST

Q.VIEW

Premium

Home

Q.MENU

GUID E

APP/

RATIO

INFO

FAV

MUTE

MARK

DELETE

CHAR/NUM

LIGHT

P A G E

3D OPTION

SMART TV

ENG

REMOTE CONTROL

Coloured buttons

These access special functions in some menus.

TELETEXT BUTTONS (See p.126) These buttons are used for teletext. For further details, see the ‘Teletext’ section.

SUBTITLE

Recalls your preferred subtitle in digital mode.

Control buttons (



Controls the Premium contents, DVR or Smart Share menus or the SIMPLINK compatible devices (USB or SIMPLINK or DVR). LIVE TV (See p.80) Return to the LIVE TV.

FREEZE

Freezes the current frame while using the TV, AV, Component, RGB-PC, or HDMI input source.

REC

Uses to adjust DVR menu. INFO (See p.91)

Views the information of the current programme and screen.

Switches the Audio Description On or Off. RATIO (See p.42) Resizes an image.

GUIDE

Shows programme guide. SIMPLINK (See p.124)

Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.

APP/

Select the MHP TV menu source. (Only Italy) (Depending on model)

Magic Motion Remote Control Functions

This item is not included for all models.

Refer to the Magic Motion Remote Control manual for operating instructions. Please read this manual carefully and use the TV correctly. When the message "Magic motion remote control battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching

and ends to the label inside the compartment, and close the battery cover. Be

sure to point the remote control toward the remote control sensor on the TV.

To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control



Pointer (RF transmitter) Blinks the light when operating.

REMOTE CONTROL

Turns the TV on or off.

Navigation buttons (up/down/

Scrolls through menus or options.

Home Menu Programme List

(POWER)

left/right)

MUTE

Mutes all sounds.

Only 3D models

Quick Menu

Home

Accesses the Home menu.

Selects menus or options and confirms your input. Press this button to display the pointer when it disappears from the screen. You can control the TV by selecting Quick Menu on the screen.

If you press the Navigation button while moving the pointer on the screen, the pointer disappears, and the Magic Motion remote control works as a common remote control.

To display the pointer again, shake

the Magic from side to side within two minutes after it disappeared. have passed, press the OK button to display the pointer.

+ -

Adjusts the volume level.

󰮽󰮾

Scrolls through the saved programmes.

Motion remote control

If two minutes

ENGENGLISH

REMOTE CONTROL

ENGLISH

ENG

Registering Magic Motion remote control

It is necessary to ‘pair’ (register) the Magic Motion remote control to your TV before it will work.

How to register the Magic Motion remote control

To register the remote control, press the OK button on the remote control while aiming it at your TV.

How to re-register the Magic Motion remote control after registration failure

Reset the remote control by pressing and holding both the OK and MUTE buttons for 5 seconds. (Once the reset is complete, the light on the pointer blinks.) Then repeat the above procedure to register the remote control.

How to use Magic Motion Remote Control

1 Press OK button if there is no pointer on your

TV screen. The pointer will then appear on the screen.

If the pointer has not been used for a certain period of time, it will disappear.

2 You can move the pointer by aiming the Pointer

Receiver of the remote control at your TV then move it left, right, up or down.

If the pointer does not work properly after clicking the OK button, leave the remote control for 10 seconds then use it again.

Precautions to Take when Using the Magic Motion Remote Control

Use the remote control within the maximum



communication distance (10 m). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to



nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as this will use the same bandwidth (2.4 GHz) as the Magic Motion Remote Control. The Magic Motion Remote Control may be



damaged or may malfunction if it is dropped or receives a heavy impact. When playing a game using the Magic Motion



Remote Control, hold it securely by wrapping its strap around your wrist and adjusting the length with the adjustable ring. Take care not to bump into nearby furniture



or other people when using the Magic Motion Remote Control. Manufacturer and installer cannot provide



service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP)



be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference.

WATCHING TV

Connecting to an antenna

Connect an antenna to watch TV while referring to the following. To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Connecting an antenna

Connect the TV to a wall antenna socket with an RF cable (75 ).

Connecting with a satellite dish

(Only satellite models)

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 ).

ENGENGLISH

Satellite

Dish

Wall Antenna

Socket

NOTE

Use a signal splitter to use more than 2 TVs.



If the image quality is poor, install a signal



amplifier properly to improve the image quality. If the image quality is poor with an antenna



connected, try to realign the antenna in the correct direction. An antenna cable and converter are not



supplied.

WATCHING TV

ENGLISH

ENG

Turning the TV on for the first time

When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings.

Connect the power cord to a power outlet.

In Standby mode, press

TV on.

The Initial setting screen appears if you turn the TV on for the first time.

NOTE

You can also access Factory Reset by



accessing OPTION in the Home menuSETUP.

Follow the on-screen instructions to customize

your TV settings according to your preferences.

Language



Mode Setting



Power Indicator



Country



Time Zone



Set Password



Auto Tuning

(POWER)

Selects a language to display.

Selects Home Use for the home environment.

Sets the power indicator. (When you select Home Use from Mode Setting - only LED LCD TV)

Selects a country to display. (Depending on model)

Selects the time zone and daylight saving. (When Russia is selected for Country)

Sets the password. (When France is selected for

Country)

Scans and saves available programmes automatically.

to turn the

NOTE

For those countries without confirmed



DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. When France is selected for Country,



password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. To display images in the best quality for



your home environment, select Home Use. Store Demo is suitable for the retail



environment. If you select Store Demo, any



customized settings will switch back to the default settings of Store Demo in 5 minutes.

4 When the basic settings are complete,

press OK.

NOTE

 If you do not complete the Initial setting, it

will appear whenever the TV turns on.

 Disconnect the power cord from the

power outlet when you do not use the TV for a long period of time.

5 To turn the TV off, press

(POWER)

Watching TV

In Standby mode, press

TV on.

Press INPUT and select Antenna.

To turn the TV off, press

The TV switches to Standby mode.

(POWER)

to turn the

+ 156 hidden pages