Please read this manual carefully before operating
your set and retain it for future reference.
LB56**
LB55**
LB62**
*MFL68003302*
www.lg.com
P/NO : MFL68003302 (1405-REV04)
Printed in Korea
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
ENGLISH
LICENSES
ENG
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx
com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote
y
control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a
bathroom
- Near any heat source such as stoves
and other devices that produce heat
- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
Do not place the product where it might
y
be exposed to dust.
This may cause a fire hazard.
Make sure to connect Mains cable
y
to compliant AC mains socket with
Grounded earth pin. (Except for devices
which are not grounded on earth.)
Otherwise possibility you may be
electrocuted or injured.
Insert power cable plug completely into
y
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
Ensure the power cord does not come
y
into contact with hot objects such as a
heater.
This may cause a fire or an electric shock
hazard.
ENGENGLISH
Mains Plug is the TV connecting/
y
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
Do not touch the power plug with wet
y
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
Do not place a heavy object, or the
y
product itself, on power cables.
Otherwise, this may result in fire or
electric shock.
Bend antenna cable between inside and
y
outside building to prevent rain from
flowing in.
This may cause water damaged inside
the Product and could give an electric
shock.
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
When mounting TV onto wall make sure
y
to neatly install and isolate cabling from
rear of TV as to not create possibility of
electric shock /fire hazard.
Do not plug too many electrical devices
y
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
Do not drop the product or let it fall over
y
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
Keep the anti-moisture packing material
y
or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the
reach of children.
Do not let your children climb or cling
y
onto the TV. Otherwise, the TV may fall
over, which may cause serious injury.
Dispose of used batteries carefully
y
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
Do not insert any metal objects/
y
conductors (like a metal chopstick/
cutlery/screwdriver) between power cable
plug and input Wall Socket while it is
connected to the input terminal on the
wall. Additionally, do not touch the power
cable right after plugging into the wall
input terminal. You may be electrocuted.
(Depending on model)
Do not put or store inflammable
y
substances near the product. There
is a danger of combustion/explosion
or fire due to careless handling of the
inflammable substances.
Do not drop metallic objects such as
y
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service
centre.
Do not spray water on the product or
y
scrub with an inflammable substance
(thinner or benzene). Fire or electric
shock accident can occur.
SAFETY INSTRUCTIONS
5
Do not allow any impact, shock or any
y
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
Never touch this product or antenna
y
during a thunder or lighting storm.
You may be electrocuted.
Never touch the wall outlet when there is
y
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the
y
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
Unplug the TV from AC mains wall socket
y
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
Apparatus shall not be exposed to
y
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Do not install this product on a wall if it
y
could be exposed to oil or oil mist.
This may damage the product and cause
it to fall.
CAUTION
Install the product where no radio wave
y
occurs.
ENGENGLISH
If any of the following occur, unplug the
y
product immediately and contact your
local service centre.
- The product has been impacted by
shock
- The product has been damaged
- Foreign objects have entered the
product
- The product produced smoke or a
strange smell
This may result in fire or electric shock.
There should be enough distance
y
between an outside antenna and power
lines to keep the former from touching the
latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such
y
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
If you install the TV on a stand, you need
y
to take actions to prevent the product
from overturning. Otherwise, the product
may fall over, which may cause injury.
If you intend to mount the product to a
y
wall, attach VESA standard mounting
interface (optional parts) to the back of
the product. When you install the set to
use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories
y
specified by the manufacturer.
When installing the antenna, consult
y
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.
We recommend that you maintain a
y
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
Do not place non-rechargeable batteries
y
in charging device.
Make sure there are no objects between
y
the remote control and its sensor.
Signal from Remote Control can
y
be interrupted due to external/
internal lighting eg Sunlight, fluorescent
lighting.If this occurs turn off lighting or
darken viewing area.
When connecting external devices such
y
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
Do not turn the product On/Off by
y
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
Only use the specified type of battery.
y
This could cause damage to the remote
control.
Do not mix new batteries with old
y
batteries. This may cause the batteries to
overheat and leak.
Batteries should not be exposed to
y
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
Please follow the installation instructions
y
below to prevent the product from
overheating.
- The distance between the product and
the wall should be more than 10 cm.
- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
- Do not install the product on a carpet or
cushion.
- Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
SAFETY INSTRUCTIONS
7
Take care not to touch the ventilation
y
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your
y
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
Prevent dust collecting on the power plug
y
pins or outlet.
This may cause a fire hazard.
Protect the power cord from physical or
y
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
When cleaning the product and its
y
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the
y
AC wall outlet, it is not disconnected from
the AC power source even if you turn off
this unit by SWITCH.
When unplugging the cable, grab the
y
plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power
cord from the power board, as this could
be hazardous.
ENGENGLISH
Do not press strongly upon the panel
y
with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it, as
it may cause damage to screen.
Avoid touching the screen or holding
y
your finger(s) against it for long periods
of time. Doing so may produce some
temporary or permanent distortion/
damage to screen.
When moving the product, make sure
y
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
When moving or unpacking the product,
y
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Contact the service centre once a year to
y
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
Refer all servicing to qualified service
y
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
If the product feels cold to the touch,
y
there may be a small “flicker” when it is
turned on. This is normal, there is nothing
wrong with product.
You may find different brightness and
y
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is
not malfunction.
Displaying a still image (e.g.,
y
broadcasting channel logo, on-screen
menu, scene from a video game) for a
prolonged time may cause damage to
the screen, resulting in retention of the
image, which is known as image sticking.
The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more
hours for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
The panel is a high technology display
y
product with resolution of two million
to six million pixels. You may see tiny
black dots and/or brightly coloured dots
(red, blue or green) at a size of 1 ppm
on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
Generated Sound
y
“Cracking” noise: A cracking noise that
occurs when watching or turning off
the TV is generated by plastic thermal
contraction due to tempera-ture and
humidity. This noise is common for
products where thermal deformation is
required. Electrical circuit humming/panel
buzzing: A low level noise is generated
from a high-speed switching circuit, which
supplies a large amount of current to
operate a product. It varies depend-ing
on the product.
This generated sound does not affect the
performance and reliability of the product.
SAFETY INSTRUCTIONS
9
Viewing 3D Imaging
(Only 3D models)
WARNING
Viewing Environment
yViewing Time
- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may
cause headache, dizziness, fatigue or
eye strain.
Those that have a photosensitive seizure or
chronic illness
ySome users may experience a seizure or
other abnormal symptoms when they are
exposed to a ashing light or particular
pattern from 3D contents.
yDo not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
y3D Contents are not recommended to those
who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
yIf you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
yIf your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
yDo not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
yWhen these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- Consult your doctor when the symptoms
persist. Symptoms may include
headache, eyeball pain, dizziness,
nausea, palpitation, blurriness,
discomfort, double image, visual
inconvenience or fatigue.
CAUTION
Viewing Environment
Viewing Distance
y
- Maintain a distance of at least twice the
screen diagonal length when watching
3D contents. If you feel discomfort in
viewing 3D contents, move further away
from the TV.
Viewing Age
yInfants/Children
- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- Children under the age of 10 may
overreact and become overly excited
because their vision is in development
(for example: trying to touch the
screen or trying to jump into it. Special
monitoring and extra attention is
required for children watching 3D
contents.
- Children have greater binocular
disparity of 3D presentations than adults
because the distance between the eyes
is shorter than one of adults. Therefore
they will perceive more stereoscopic
depth compared to adults for the same
3D image.
yTeenagers
- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them
to refrain from watching 3D contens for
a long time when they are tired.
yElderly
- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise,
y
you may not be able to view 3D videos
properly.
Do not use 3D glasses instead of your
y
normal glasses, sunglasses or protective
goggles.
Using modied 3D glasses may cause eye
y
strain or image distortion.
Do not keep your 3D glasses in extremely
y
high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy
y
to be scratched. Always use a soft, clean
piece of cloth when wiping the lenses. Do
not scratch the lenses of the 3D glasses
with sharp objects or clean/wipe them with
chemicals.
ENGENGLISH
10
<
<
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you
are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
A
B
*A
10 mm
=
*B
18 mm
A
=
ASSEMBLING AND PREPARING
11
ENGENGLISH
Remote control,
batteries (AAA)
Power Cord
Stand Screws
3EA, M4 x L20
(Only 32LB565*)
Owner’s manualCable Holder
Stand Screws
4EA, M4 x L14
(Only 39/42/47/50/
55/60LB56**,
42/49/55LB55**,
42/49/55LB62**)
The number of 3D glasses
may differ depending on the
model or country.
(Only LB62**)
Battery
(Only LB552*)
Rubbers
4EA
(Only LB565*)
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items. These devices only work with certain models. The model
name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
AG-F***
Cinema 3D glasses
AG-F***DP
Dual play glasses
LG Audio Device
Compatibility
AG-F***
Cinema 3D glasses
AG-F***DP
Dual play glasses
LG Audio Device•
LB62**LB56**LB55**
•
•
(Except for 32LB56*B,
•
32LB56*D, 32LB56*Z,
32LB565*)
(Except for 32LB55*B,
32LB55*D, 32LB55*R,
32LB55*Z)
•
ASSEMBLING AND PREPARING
13
Parts and buttons
A type : LB560*, LB561*, LB563*, LB569*,
LB55**, LB62**-TA
Screen
Speakers
Joystick button
(* This button is located
below the TV screen.)
C type : LB565*
Remote control sensor
Power Indicator
Screen
B type : LB62**-TF/TE
Speakers
Joystick button
(* This button is located
below the TV screen.)
ENGENGLISH
Screen
Remote control sensor
Power Indicator
Speakers
Joystick button
(* This button is located
below the TV screen.)
Remote control sensor
Power Indicator
NOTE
yYou can set the power indicator light to on or off by selecting OPTION in the main menus.
14
ASSEMBLING AND PREPARING
Using the Joystick button
ENGLISH
ENG
You can simply operate the TV functions, by pressing to turn ON/OFF or sliding your finger over
joystick button moving up, down, left or right.
Basic Functions
Power On
Power Off
Volume
Control
Programmes
Control
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.
NOTE
yWhen your finger is over the joystick button and you are sliding finger forward/back ,left or right,
be careful not to press down to hard on joystick . If you press down hard on joystick button first
then the adjustment of Volume level and programme scroll action will not operate.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items () moving the joystick button up, down, left or right.
TV OffTurns the power off.
SettingsAccesses the main menu.
CloseClears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
15
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LB565*)
ENGENGLISH
2EA
M4 x L20
CAUTION
yWhen attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Rubber
4EA
18
ASSEMBLING AND PREPARING
Using the battery
ENGLISH
ENG
(Only LB552*)
Attaching the battery
Battery latch
yAttach the battery and lock the battery latch.
CAUTION
yPlease be cautious that the battery does
not fall off when separating it from TV.
yPlease power off and disconnect AC
mains input power to TV when changing
battery.
Battery
In the battery mode
Enter the Battery mode
When power supply is unavailable, power
is supplied from the battery automatically.
When Energy saving mode is OFF, TV will
automatically set to Medium.
The battery icon disappears after 5
1
seconds.It reappears when the battery
level changes.
The brightness of the screen is adjusted.
2
The volume is limited to 30.
3
1
2
3
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.