LG 60LA623T User manual

OWNER’S MANUAL

LED TV*

*Disclaimer

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LA62** LA64**

LA66** LA69**

LA71** LA74**

LN56** LN57** LN61**

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 TABLE OF CONTENTS

TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

8Viewing 3D Imaging (Only 3D models)

9INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking

13Separate purchase

14Parts and buttons

16Lifting and moving the TV

17Setting up the TV

17 - Attaching the stand

20 Mounting on a table

22 Mounting on a wall

24Tidying cables

25MAKING CONNECTIONS

25Antenna connection

26HDMI connection

26Headphone connection

27DVI to HDMI connection

27Component connection

28Composite connection

28Audio connection

28- Digital optical audio connection

29USB connection

29MHL connection

30REMOTE CONTROL

33MAGIC REMOTE CONTROL FUNCTIONS

34Registering Magic Remote Control

34How to use Magic Remote Control

34Precautions to Take when Using the

Magic Remote Control

35USING THE USER GUIDE

36 MAINTENANCE

36 Cleaning your TV

36 - Screen, frame, cabinet and stand

36 - Power cord

36TROUBLESHOOTING

37ENVIRONMENTAL INFORMATION

37WEEE

38SPECIFICATIONS

49 LICENSES

49OPEN SOURCE SOFTWARE NOTICE

49EXTERNAL CONTROL DEVICE SETUP

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

SAFETY INSTRUCTIONS

3

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yyDo not place the TV and/or remote control in the following environments:

--A location exposed to direct sunlight --An area with high humidity such as a

bathroom

--Near any heat source such as stoves and other devices that produce heat --Near kitchen counters or humidifiers where they can easily be exposed to

steam or oil

--An area exposed to rain or wind --Near containers of water such as vases Otherwise, this may result in fire, electric

shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust.

This may cause a fire hazard.

yyMains Plug is the TV connecting/ disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which

are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

yyInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the

Product and could give an electric shock.

yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

yyDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 SAFETY INSTRUCTIONS

yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yyKeep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Desiccant

yyDo not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to ensure that a small child does not consume them. Please seek DoctorMedical Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)

yyDo not put or store inflammable substances near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yyDo not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

	SAFETY INSTRUCTIONS	5
yyIf any of the following occur, unplug the	yyIf you install the TV on a stand, you need
product immediately and contact your	to take actions to prevent the product from
local service centre.	overturning. Otherwise, the product may
--The product has been impacted by	fall over, which may cause injury.
shock
--The product has been damaged
--Foreign objects have entered the
product
--The product produced smoke or a
strange smell	yyIf you intend to mount the product to a
This may result in fire or electric shock.
	wall, attach VESA standard mounting
	interface (optional parts) to the back of the
	product. When you install the set to use
	the wall mounting bracket (optional parts),
	fix it carefully so as not to drop.
yyUnplug the TV from AC mains wall socket	yyOnly use the attachments / accessories
	specified by the manufacturer.
if you do not intend to use the TV for a
long period of time. Accumulated dust	yyWhen installing the antenna, consult
can cause fire hazard and insulation
	with a qualified service technician. If not
deterioration can cause electric leakage/
	installed by a qualified technician, this
shock/fire.
	may create a fire hazard or an electric
	shock hazard.
yyApparatus shall not be exposed to
dripping or splashing and no objects	yyWe recommend that you maintain a
filled with liquids, such as vases, shall be
placed on the apparatus.	distance of at least 2 to 7 times the
	diagonal screen size when watching TV.
	If you watch TV for a long period of time,
	this may cause blurred vision.

CAUTION

yyInstall the product where no radio wave occurs.

yyThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

yyOnly use the specified type of battery. This could cause damage to the remote control.

yyDo not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

yyBatteries should not be exposed to excessive heat. For example, keep away from direct Sunlight, open fireplace and electric heaters.

yyDo not place non-rechargeable batteries in charging device.

yyMake sure there are no objects between the remote control and its sensor.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6 SAFETY INSTRUCTIONS

yySignal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.

yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

yyPlease follow the installation instructions below to prevent the product from overheating.

--The distance between the product and the wall should be more than 10 cm.

--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

--Do not install the product on a carpet or cushion.

--Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yyPrevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water

or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

SAFETY INSTRUCTIONS

7

yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

yyWhen moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

yyContact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.

This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged

time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8 SAFETY INSTRUCTIONS

Viewing 3D Imaging (Only 3D models)

WARNING

Viewing Environment

yy Viewing Time

-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yy If your eyesight varies between your right and left eye, revise your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

CAUTION

Viewing Environment

Viewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yy Infants/Children

-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

-- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

-- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yy Teenagers

-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yy Elderly

-- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

Using modified 3D glasses may cause eye strain or image distortion.

Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

9

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using.

yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

yy Some models have a thin film attached on to the screen and this must not be removed.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

	B	B
		<	10 mm
		*A =
		<	18 mm
A		*B =
		A

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Tag On

P

Remote control,

Magic remote control,

Owner’s manual

Tag on

batteries (AAA)

batteries (AA)

(Depending on model)

(Depending on model)

(Only LA620*, LA621*,

(See p.30, 31, 32)

LA623T, LA640*,

LA66**, LA69**,

LA71**, LA74**,

LN570B, LN570Y,

LN570Z, LN5700,

LN572*, LN61**)

(Depending on model)

(See p.33)

Cinema 3D Glasses		Dual play glasses		Cable holder		Power Cord
The number of 3D		(Depending on model)		(Depending on		(Depending on model)
glasses may differ				model)
depending on the model				(See p.24)
or country.
(Depending on model)

Desk-mount Screw		Desk-mount Cable		Bracket Screw		Bracket Screw
(1EA : Only		2EA		2EA, M4 x 8		2EA, P4 x 8
32/42/47/50/60LN570B,		32/39/42/47/50LA62**,		(Only		(Only 47/50LA62**,
32/42/47/50/60LN570Y,		32/42/47/50LA64**,		32/39/42LA62**,		47/50LA64**,
32/42/47/50/60LN570Z,		32/42/47/50LA66**,		32/42LA64**,		47/50LA66**,
32/42/47/50/60LN5700,		47LA71**,		32/42LA66**,		47LA71**,
32/42/47/50/60LN572*)		32/39LN56**,		32/39LN56**,		47/50LN570T,
(2EA : Only		32/42/47/50LN570T,		32/42LN570T,		47/50LN571*,
32/39/42/47/50LA62**,		32/42/47/50LN571*,		32/42LN571*,		47LN61**)
32/42/47/50LA64**,		32/42/47LN61**)		32/42LN61**)		(See p.20)
32/42/47/50LA66**,		(See p.20)		(See p.20)
47LA71**,
32/39LN56**,
32/42/47/50LN570T,
32/42/47/50LN571*,
32/42/47LN61**)
(See p.20)

ASSEMBLING AND PREPARING

11

			or
Stand Screws	Stand Screws	Stand Screws	Isolator
8EA, M4 x 14	4EA, M4 x 20	3EA, P5 x 25	(Depending on model)
(Only LA62**, LA64**,	(Only LA69**,	4EA, M4 x 14	(See p.12)
LA66**, LA71**,	LA74**)	(Only LN570B,
LN56**, LN570T,	(See p.18)	LN570Y, LN570Z,
LN571*, LN61**)		LN5700, LN572*)
(See p.17, 18)		(See p.19)

Wall mount inner		Blu-Ray		Stand Body / Stand		Stand Base
spacers		(Only LA6980)		Base		(Only LA69**, LA74**)
4EA				(Only LA62**,		(See p.18)
(Only LA64**)				32/42/47/50/55LA64**,
(See p.23)				LA66**, LA71**,
				LN56**, LN570T,
				LN571*, LN61**)
				(See p.17)

<![if ! IE]>

<![endif]>ENGLISH

Stand Body / Stand		Stand Body / Stand		Cable Management
Base		Base		2 EA
(Only LN570B, LN570Y,		(Only 60LA64**)		(Only 60LA64**)
LN570Z, LN5700,		(See p.18)		(See p.24)
LN572*)
(See p.19)

12 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

NOTE

yy Antenna Isolator Installation Guide

-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.

-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-- Before starting, be sure that the TV antenna is connected.

1. Connect to TV.

Wall
ANTENNA/	or

Cable / Antenna	Isolator

2. Connect to Set-Top box.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

ASSEMBLING AND PREPARING

13

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items.

These devices only work with certain models.

<![if ! IE]>

<![endif]>ENGLISH

		P
AG-F***DP	AG-F***	AN-MR400
Dual play glasses	Cinema 3D glasses	Magic remote

Tag On

Tag on	AN-VC4**	LG Audio device
	Video call camera

AN-WF100

Wi-Fi Dongle

	Compatibility	LN56**	LN57**, LN61**	LA62**, LA64**, LA66**,
				LA69**, LA71**, LA74**
	AG-F***DP			•
	Dual play glasses
	AG-F***			•
	Cinema 3D glasses
	AN-MR400	•	•	•
	Magic remote
	AN-VC4**	•	•	•
	Video call camera
	LG Audio device	•	•	•
	Tag on	•	•	•
	AN-WF100	•
	Wi-Fi Dongle

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

Parts and buttons

Screen	Buttons
A type : LA62**,
32/42/47/50/55LA64**,
LA66**, LA71**, LN56**,
LN570T, LN571*, LN61**
	OK
	SETTINGS
	INPUT
Speakers
	Remote control sensor
	LG Logo light
	(Only 32/42/47/50/55LA64**, LA66**,
	LA71**)
	Power Indicator
	(Only LN56**, LN570T, LN571*, LN61**,
	LA62**)
Screen	Buttons
B type : 60LA64**
	OK
	SETTINGS
	INPUT
	Speakers
	Remote control sensor
	LG Logo light
Screen	Buttons
C type : LA69**, 42/47/55LA74**

OK

SETTINGS

INPUT

Speakers

Remote control sensor

LG Logo light

ASSEMBLING AND PREPARING

15

Screen	Buttons

D type : 60LA74**

OK

SETTING

INPUT

Speakers

Remote control sensor

LG Logo light

Screen

Buttons

E type : LN570B, LN570Y, LN570Z,

LN5700, LN572*

	OK
	SETTINGS
Speakers	INPUT

Remote control sensor

Power Indicator

<![if ! IE]>

<![endif]>ENGLISH

Button	Description
	Scrolls through the saved programmes.
	Adjusts the volume level.
	Selects the highlighted menu option or confirms an input.
S	Accesses the main menu, or saves your input and exits the menus.
	Changes the input source.
	Turns the power on or off.

NOTE

yy You can set the LG Logo light to on or off by selecting OPTION in the main menus. (Depending on model)

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy It is recommended to move the TV in the box or packing material that the TV originally came in.

yy Before moving or lifting the TV, disconnect the power cord and all cables.

yy When holding the TV, the screen should face away from you to avoid damage.

yy When transporting a large TV, there should be at least 2 people.

yy When transporting the TV by hand, hold the TV as shown in the following illustration.

yy When transporting the TV, do not expose the TV to jolts or excessive vibration.

yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yy Do not apply excessive pressure to cause flexing /bending of frame chassis as it may damage screen.

yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.