LG 55UC9700 Owner's Manual [es]

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

Click! User Guide

49UB8500 55UB8500 60UB8500

65UB9500 55UC9700

*MFL67987172*

65UC9700 79UG8800

65UB9800 79UB9800 84UB9800

www.lg.com

P/NO : MFL67987172 (1410-REV03)

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of

ENGLISH

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

• Do not allow the television to become wet.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• CAUTION concerning the Power Cord

(Can differ by country): Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Warning - To reduce the risk of fire or

electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

ENGLISH

• Do not stick metal objects or any other

conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Keep the packing anti-moisture material or

vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

IMPORTANT SAFETY INSTRUCTIONS

• Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power Supply

Short-circuit Breaker

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this

ENGLISH

product.

• Outdoor Antenna Grounding

(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

• Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.

• Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

• If you smell smoke or other odors coming

from the TV, unplug the power cord and contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during

a lightning storm.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not allow an impact shock or any objects

to fall into the product, and do not drop anything onto the screen.

• DISCONNECTING DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

• Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

• This apparatus uses batteries. In your

community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow

the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

• Do not use high voltage electrical equipment

near the TV, (e.g., bug zapper). This may result in product malfunction.

• Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

• Take care not to touch the ventilation

openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

• If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging (For 3D models)

WARNING

Viewing Environment

• Viewing Time

- When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

• Some users may experience a seizure or other abnormal symptoms when they are exposed to a

flashing light or particular pattern from 3D content.

• Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc.

• 3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced.

• If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may have

trouble sensing depth and easily feel fatigue due to double images. It is advised to take more frequent breaks than the average adult.

• If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

content.

ENGLISH

Symptoms which require discontinuation or refraining from watching 3D content

• Do not watch 3D content when you feel fatigue from lack of sleep, overwork, or intoxication.

• When these symptoms are experienced, stop using/watching 3D content and get enough rest until

the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, define visual inconvenience, or fatigue.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

• Viewing Distance

- Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.

Viewing Age

• Infants / Children

- Usage/ Viewing 3D content for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in

development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

• Teenagers

- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

• Elderly

- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

• Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.

• Using modified 3D glasses may cause eye strain or image distortion.

• Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

• The 3D glasses are fragile and are easily scratched. Use a soft, clean piece of cloth when wiping

the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

ENGLISH

performing such distribution (such as the cost of media, shipping and handling) upon email request to

opensource@lge.com

product.

http://opensource.lge.com

. This offer is valid for three (3) years from the date on which you purchased the

. In addition to the source code, all referred license

NOTE

•Image shown may differ from your TV.

•Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

•The available menus and options may differ from the input source or product model that you are

using.

•New features may be added to this TV in the future.

TABLE OF CONTENTS

2 IMPORTANT SAFETY

INSTRUCTIONS

6 Viewing 3D Imaging (For 3D models)

8 LICENSES

8 OPEN SOURCE SOFTWARE

NOTICE

9 TABLE OF CONTENTS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking 13 Optional Extras 14 Parts and Buttons 16 - Using the Joystick Button 17 Lifting and Moving the TV 18 Setting Up the TV 18 - Attaching the Stand 21 - Mounting on a Table 22 - Mounting on a Wall 24 - Tidying Cables 24 Using Built-in Camera 25 - Preparing Built-in Camera 25 - Name of Parts for the Built-In Camera 25 - Checking the Camera’s Shooting

Range

26 MAKING CONNECTIONS

26 Connecting to an Antenna or Cable 27 Connecting to an HD Receiver, DVD

Player, or VCR 27 - HDMI Connection 28 - DVI to HDMI Connection 29 - Connecting to a Mobile Phone 30 - Component Connection 31 - Composite Connection 32 Connecting to a PC 32 - HDMI Connection or DVI to HDMI

Connection 34 Connecting to an Audio System 34 - Digital Optical Audio Connection 35 Connecting Headphones 36 Connecting a USB Device

37 MAGIC REMOTE FUNCTIONS

38 Registering Magic Remote 38 How to use Magic Remote 38 Precautions to Take when Using the

Magic Remote

39 USING THE USER GUIDE

39 EXTERNAL CONTROL DEVICE

SETUP

40 SPECIFICATIONS

43 MAINTENANCE

43 Cleaning Your TV 43 - Screen, Frame, Cabinet, and Stand 43 - Power Cord

ENGLISH

43 TROUBLESHOOTING

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

* When the TV is turned on for the first time after being shipped from the factory, initialization of the

TV may take approximately one minute.

ASSEMBLING AND PREPARING

ENGLISH

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

•Do not use any unapproved items to ensure the safety and product’s lifespan.

•Any damages or injuries by using unapproved items are not covered by the warranty.

•In case of some model, the thin film on screen is a part of TV, So don’t take it off.

NOTE

• The items supplied with your product may vary depending upon the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB flash drive does not fit into your TV’s USB port.

• Use a certified cable with the HDMI logo attached. If you do not

use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI®/TM cable

- High-Speed HDMI®/TM cable with Ethernet

*A 10 mm *B 18 mm

ASSEMBLING AND PREPARING

Owner’s Manual Power Cord

( For 49/55/60UB8500,

65UB9500)

Stand Base, Stand Body

(See page 18.)

(For 65/79/84UB9800) (For 65UB9800) (For 79/84UB9800)

Stand Base (See page 19.)

(For 84UB9800) ( For 55/65UC9700) ( For 55/65UC9700)

(Depending upon model.)

( For 49/55/60UB8500,

65UB9500) (For 65/79/84UB9800)

Stand Screws

8 EA, M4 x L20 (See page 18.)

Stand Screws 4 EA, M6 x L47 (See page 19.)

Video Call Camera

(Depending upon model.)

Wrench

(See page 19.)

Stand Screws 4 EA, M6 x L52 (See page 19.)

ENGLISH

Insulation Holder

4 EA (See page 19.)

Stand Base, Stand Body (See page 20.)

Stand Screws 4 EA, M4 x L10 4 EA, M4 x L20 (See page 20.)

ASSEMBLING AND PREPARING

( For 79UG8800) ( For 79UG8800)

Stand Base, Stand Body (See page 20.)

( For 55/65UC9700,

79UG8800)

Cable Management

ENGLISH

2 EA (See page 24.)

HDMI Cable

(See pages 27 and 32.)

Magic Remote (See page 37.)

Stand Screws 2 EA, M4 x L10 10 EA, M4 x L14 (See pages 20 and 21.)

Cable Holder

(Depending upon model.) (See page 24.)

Component Video Cable (See page 30.)

Cinema 3D Glasses

(Depending upon model.) The number of 3D glasses may differ depending upon the model or country.

Cable Management

2 EA (Depending upon model.) (See page 24.)

( For 55/65UC9700,

79UG8800)

Wall Mount Inner Spacers

4 EA (See page 23.)

Composite Video Cable (See pages 30 and 31.)

Dual Play Glasses

(Depending upon model.)

Batteries (AA)

(Depending upon model.) (See page 37.)

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.

AG-F***

Cinema 3D Glasses

LG Audio Device AN-VC5**

Compatibility

AG-F***

Cinema 3D Glasses

AG-F***DP Dual Play Glasses

AN-MR500 Magic Remote

AN-VC5** Video Call Camera (Depending upon model.)

LG Audio Device

AG-F***DP

Dual Play Glasses

Video Call Camera (Depending upon model.)

49/55/60UB8500

55/65UC9700

AN-MR500

Magic Remote

65UB9500

79UG8800

• •

•

• •

65/79/84UB9800

ENGLISH

ASSEMBLING AND PREPARING

Parts and Buttons

(For 49/55/60UB8500) (For 65UB9500)

Screen

Speakers

Remote Control Sensor

Intelligent Sensor

ENGLISH

Power Indicator

Joystick Button

Remote Control Sensor

Intelligent Sensor

Power Indicator

(For 65/79UB9800) (For 84UB9800)

Screen

Speakers

Built in Camera

Speakers

(For 79UB9800)

Remote Control Sensor

Joystick Button

Remote Control Sensor

LG Logo Light

Intelligent Sensor

Speakers

Screen

Speakers

LG Logo Light

Joystick Button

Built in Camera

Joystick Button

ASSEMBLING AND PREPARING

(For 55/65UC9700)

Screen

Remote Control Sensor

Intelligent Sensor

LG Logo Light

Speakers

Joystick Button

(For 79UG8800)

Screen

Remote Control Sensor

Intelligent Sensor

LG Logo Light

Speakers

Joystick Button

1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2. Joystick button is located behind the screen of TV.

3. Joystick button is located below the screen of TV.

NOTE

•You can set the LG Logo Light or power indicator light to on or off by selecting GENERAL in the

main menu. (Depending upon model.)

ENGLISH

ASSEMBLING AND PREPARING

Using the Joystick Button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume Control

Channels Control

When the TV is turned off, place your finger on the joystick button, press it once and release it.

When the TV is turned on, place your finger on the joystick button, press it once for a few seconds

If you place your finger over the joystick button and move it left or right, you can adjust the volume level.

If you place your finger over the joystick button and move it up or down, you can scroll through the saved channels you want.

, and release it.

NOTE

• With your finger over the joystick button and move it up, down, left, or right; be careful not to press

the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved channels.

ENGLISH

Adjusting the menu

When the TV is turned on, press the joystick button one time. You can adjust the Menu items ( , , ) moving the joystick button left or right.

TV OFF

INPUT

Turns the power off.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

ASSEMBLING AND PREPARING

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

•Avoid touching the screen at all times, as

this may result in damage to the screen.

•Do not place the product on the floor with its

front facing down without padding. Failure to do so may result in damage to the screen.

• It is recommended to move the TV in the

box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the

screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• Use at least two people to

move a large TV.

• When transporting the TV by

hand, hold the TV as shown in the following illustration.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt towards the left or right.

ENGLISH

ASSEMBLING AND PREPARING

Setting Up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

• When attaching the stand to the TV set,

place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

• Make sure that the screws are fastened

tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

• Do not fasten the screws with excessive

force otherwise they may be worn out and become loose.

ENGLISH

NOTE

• Remove the stand before installing the TV

on a wall mount by performing the stand attachment in reverse.

• Remove the protective film from the stand

base and then attach the stand body to the stand base. (For UC9700 series)

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

(For 49/55/60UB8500, 65UB9500)

Stand Body (L)

Stand Body (R)

Stand Base

M4 x L20 4 EA

ASSEMBLING AND PREPARING

(For 65/79/84UB9800)

Stand Base

(For 65/79UB9800)

(For 84UB9800)

Wrench

M6 x L52 4 EA

4 EA

(Insulation

Holder)

CAUTION

•Make sure that the screws are inserted

correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

ENGLISH

Wrench

(For 65UB9800) M6 x L47 4 EA

(For 79UB9800) M6 x L52 4 EA

ASSEMBLING AND PREPARING

(For 55/65UC9700)

Stand Base

M4 x L10 4 EA

ENGLISH

Stand Body (L)

Stand Body (R)

M4 x L20 4 EA

(For 79UG8800)

Stand Body (R)

When attaching the stand to the TV set,

make sure to put the protective packaging that is included in the product box on a table or flat surface and then place the TV screen facing down on the protective packaging.

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

Stand Body (L)

Stand Base

M4 x L14 6 EA

M4 x L10 2 EA

ASSEMBLING AND PREPARING

When attaching the stand to the TV set,

make sure to put the protective packaging that is included in the product box on a table or flat surface and then place the TV screen facing down on the protective packaging.

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

Mounting on a Table

Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

•Do not place the TV near or on sources

of heat, as this may result in fire or other damage.

ENGLISH

M4 x L14 4 EA

ASSEMBLING AND PREPARING

Securing the TV to a Wall (optional)

(Depending upon model.)

1 Insert and tighten the eye-bolts, or TV

ENGLISH

brackets and bolts on the back of the TV.

If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to

the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

CAUTION

•Make sure that children do not climb on or

hang on the TV.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

NOTE

•Use a platform or cabinet that is strong and

large enough to support the TV securely.

•Brackets, bolts, and ropes are optional. You

can obtain additional accessories from your local dealer.

ASSEMBLING AND PREPARING

Model 49/55UB8500

VESA (A x B)

Standard screw Number of

screws Wall mount

bracket (optional)

Model 79UG8800

VESA (A x B)

Standard screw M8

Number of screws

Wall mount bracket (optional)

LSW440B

LSW640B

55UC9700

400 x 400

4 4

LSW440B MSW240

79/84UB9800 600 x 400

LSW640B

Wall mount bracket (optional)

60UB8500 65UB9500 65UC9700 65UB9800

400 x 400

LSW440B

CAUTION

•Disconnect the power before moving or

installing the TV. Otherwise electric shock may occur.

•If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

•Do not over tighten the screws as this may

cause damage to the TV and void your warranty.

•Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

•Use the screws that are listed in the VESA

standard screw specifications.

•The wall mount kit includes an installation

manual and necessary parts.

•The wall mount bracket is optional. You can

obtain additional accessories from your local dealer.

•The length of screws may differ depending

upon the wall mount. Make sure to use the proper length.

•For more information, refer to the manual

supplied with the wall mount.

•When attaching a third-party wall mounting

bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. (For 55/65UC9700, 79UG8800)

Wall Mount Inner Spacers

ENGLISH

MSW240

ASSEMBLING AND PREPARING

Tidying Cables

(For 49/55/60UB8500, 65UB9500)

Gather and bind the cables with the Cable Holder and Cable management .

Cable Holder

Cable management

(For 65/79/84UB9800)

Gather and bind the cables with the

ENGLISH

Cable Holder.

Cable Holder

(For 55/65UC9700, 79UG8800)

Gather and bind the cables with the Cable Holder and Cable management .

CAUTION

•Do not move the TV by holding the cable

holder and Cable management , as the cable holders may break, and injuries and damage to the TV may occur.

Using Built-in Camera

(For 65/79/84UB9800) You can make a Skype video call or use the

motion recognition function using the built-in camera of the TV.

This TV does not support the use of an external camera.

NOTE

•Before using the built-in camera, you must

recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law.

•The relevant laws include the Personal

Information Protection law which regulates the processing and transferring of personal information and the law which regulates the monitoring by camera in a workplace and other places.

•When using the built-in camera, the user

must gain consent from the persons being observed. Please avoid using the camera in the following manner. We suggest avoiding the following situations: (1) Using the camera in areas where the use of camera is generally prohibited such as restroom, locker room, fitting room, and security area. (2) Using the camera while causing the infringement of privacy. (3) Using the camera while causing the violation of the relevant regulations or laws.

Cable Holder

Cable management

ASSEMBLING AND PREPARING

Preparing Built-in Camera

Pull up the built-in camera at the back of the

TV.

Angle Adjustment Lever

Slide

NOTE

•Remove the protective film before using the

built-in camera.

2 You can adjust the angle of the camera with

the angle adjustment lever on the back of the built-in camera.

3 Pull down the built-in camera when you are

not using it.

Name of Parts for the Built-In Camera

Protective film

Camera Lens

ENGLISH

Lever Lens

[Side View]

7˚

5˚

7˚

Microphone

Checking the Camera’s Shooting Range

Press the (Home) button to access the

Home menu.

2 Select Camera and then

press the Wheel (OK) button.

NOTE

•The optimal distance from the camera

to use the motion recognition function is between 1.5 m and 4.5 m.

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

•If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

•The external device connections shown may differ slightly from illustrations in this manual.

•Connect external devices to the TV regardless about the order of the TV port.

•If you connect a gaming device to the TV, use the cable supplied with the gaming device.

•Refer to the external equipment’s manual for operating instructions.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

ENGLISH

VHF Antenna

UHF Antenna

Antenna

Coaxial (75Ω) Coaxial (75Ω)

(*Not provided) (*Not provided)

Terminal

CAUTION

•Make sure not to bend the copper wire of

the RF cable.

Copper wire

•Complete all connections between devices,

and then connect the power cord to the power outlet to prevent damage to your TV.

Wall Jack

NOTE

• To improve the picture quality in a poor

signal area, purchase a signal amplifier.

• Use a signal splitter to use 2 TVs or more.

• If the antenna is not installed properly,

contact your dealer for assistance.

• DTV Audio Supported Codec: MPEG, AAC,

HE-AAC, Dolby Digital.

• This TV cannot receive UHD (3840 x 2160

pixels) broadcasts directly because the related standards have not been confirmed.

MAKING CONNECTIONS

Connecting to an HD Receiver, DVD Player, or VCR

Connect a HD receiver, DVD player, or VCR to the TV and select an appropriate input mode.

NOTE

•HDMI specifications may be different for each input port, so make sure to check the device

specifications before connecting.

•The HDMI IN 3 port is especially suitable for the specifications to enjoy UHD Video (4:4:4, 4:2:2) of

4K @ 50/60 Hz. However, video or audio may not be supported the external equipment. In that case, use any other HDMI IN port.

•Contact customer service for more information on the HDMI specifications of each input port.

HDMI Connection

HDMI is the best way to connect a device.

Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

NOTE

•Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.

•High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

•HDMI Audio Supported Format: DTS (44.1 kHz / 48 kHz), AC3 (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz).

• When you use an HDMI cable (HDMI port 3), it is recommended that you use the cable provided.

If you use a regular HDMI cable, use a high-speed HDMI cable (3 m or less). (Depending upon model.)

depending upon the specifications of

ENGLISH

Blu-Ray / HD Cable Box / HD STB / DVD

ARC (Audio Return Channel)

• When connected with a high-speed HDMI

cable, digital audio can be sent to a compatible device without an additional optical audio cable.

• ARC is only supported on the HDMI (4K @ 60 Hz)

/ DVI IN 2 (ARC)

port. An external audio device

that supports ARC should be connected to

HDMI (4K @ 60 Hz) / DVI IN 2 (ARC)

if you wish

to use ARC.

HDMI Cable

HDMI

4K @ 50/60 Hz Support Format

Frame

Resolution

3840 X 2160p 4096 X 2160p

1. Supported at HDMI IN 3 Port only

Color Depth / Chroma Sampling rate (Hz)

50.00

59.94

60.00

8 bit 10 bit 12 bit

YCbCr

4:2:0

YCbCr

4:4:4

RGB

4:4:4

YCbCr 4:2:2

YCbCr 4:2:0

- -

+ 61 hidden pages