LG 55NANO816NA, 49NANO816NA, 55NANO866NA, 43NANO796NE Owner's Manual

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

*MFL71520705*

(2002-REV00)

www.lg.com

ENGLISH_index

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the

user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• Do not place the TV and/or remote

control in the following environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat.

- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.

• TO PREVENT THE SPREAD OF FIRE, KEEP

CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

ENGLISH_index

• Ventilation

- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other materials while unit is plugged in.

• Take care not to touch the ventilation

openings. When watching the TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is

plugged in.

• Do not use a damaged or loosely fitting

power cord.

• Be sure do grasp the plug when unplugging

the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the

same AC power outlet as this could result in fire or electric shock.

• Disconnecting the Device from the

Main Power

- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over, which may cause serious injury.

• Outdoor Antenna Grounding (Can differ

by country):

- If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

ENGLISH_index

• Grounding (Except for devices which are

not grounded.)

- TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna

during a lightning storm. You may be electrocuted.

• Make sure the power cord is connected

securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

• Do not insert metallic or inflammable

objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.

• Do not touch the end of the power

cord while it is plugged in. You may be electrocuted.

• If any of the following occur, unplug

the product immediately and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC adapter, power cord, or TV).

- If you smell smoke or other odors coming from the TV

- When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.

• Do not use high voltage electrical equipment

near the TV (e.g., a bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in

any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.

ENGLISH_index

• Use only an authorized attachments /

accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.

• Never disassemble the AC adapter or power

cord. This may result in fire or electric shock.

• Handle the adapter carefully to avoid

dropping or striking it. An impact could damage the adapter.

• To reduce the risk of fire or electrical shock,

do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of the reach of children.

- Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

- Caution : Risk of fire or explosion if the battery is replaced by an incorrect type.

• Moving

- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

• Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

• Do not allow an impact shock, any objects

to fall into the product, and do not drop anything onto the screen.

• Do not press strongly upon the panel with

a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

ENGLISH_index

Preparing

• For an optimal connection, HDMI cables

and USB devices should have bezels less

• If the TV is turned on for the first time after it

was shipped from the factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

than 10mm thick and 18mm width. Use an extension cable that supports if the USB cable or USB memory stick does not fit into your TV’s USB port.

* A < 10mm

* B < 18mm

• The available menus and options may differ

from the input source or product model that you are using.

• New features may be added to this TV in the

future.

• The device must be easily accessed to a

location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the

• Use a certified cable with the HDMI logo

attached.

• If you do not use a certified HDMI cable, the

screen may not display or a connection error may occur.

• Recommended HDMI Cable Types

- Ultra High Speed HDMI®/™ cable (3 m or less)

power cord.

• The items supplied with your product may

vary depending on the model.

• Product specifications or contents of this

manual may be changed without prior notice due to upgrade of product functions.

ENGLISH_index

Separate Purchase

Wall Mounting Bracket

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

Magic Remote Control

MR20GA

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

55NANO80*

Model

49NANO80* 49NANO81* 49NANO86*

55NANO81* 55NANO86* 55NANO90*

55NANO91* VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket

200 x 200 300 x 300

M6 M6

4 4

LSW240B MSW240

OLW480B

MSW240

65NANO80*

Model

65NANO81* 65NANO86* 65NANO90*

75NANO90*

86NANO90*

65NANO91* VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket

300 x 300 600 x 400

M6 M8

4 4

OLW480B LSW640B

ENGLISH_index

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box

or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the screen should face

away from you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should

be at least 2 people.

• When transporting the TV by hand, hold the

TV as shown in the following illustration.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause

flexing / bending of frame chassis as it may damage screen.

• When handling the TV, be careful not to

damage the protruding buttons.

ENGLISH_index

• Avoid touching the screen at all times,

as this may result in damage to the screen.

• When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on a Table

1 Lift and tilt the TV into its upright position on

a table.

•Leave a 10cm (minimum) space from the wall for proper ventilation.

10cm

• Do not apply foreign substances (oils,

lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

• If you install the TV on a stand, you

need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• Do not use any unapproved items to

ensure the safety and product life span.

• Any damage or injuries caused by using

unapproved items are not covered by the warranty.

• Make sure that the screws are inserted

correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

(Depending on model)

2 Connect the power cord to a wall outlet.

ENGLISH_index

Securing TV to the Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

•If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts and ropes are not provided.

You can obtain additional accessories from your local dealer.

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

10cm

(Depending on model)

10cm

ENGLISH_index

• Remove the stand before installing the

TV on a wall mount by performing the stand attachment in reverse.

• For more information of screws and

wall mount bracket, refer to the Separate Purchase.

• If you intend to mount the product to

a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting a TV on the wall, make

sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may damage the product and cause it to fall.

(Depending on model)

• Do not use a sharp object when you

detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm. (Depending on model)

• When installing the wall mounting bracket,

it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model)

Stand hole

ENGLISH_index

Connections

CI module

Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal

amplifier properly to improve the image quality.

• If the image quality is poor with an antenna

connected, try to realign the antenna in the correct direction.

• An antenna cable and converter are not

supplied.

• For a location that is not supported with

ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model)

View the encrypted (pay) services in digital TV mode. (Depending on model)

• Check if the CI module is inserted into the

PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.

• If the TV does not display any video and

audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

HDMI

• When connecting the HDMI cable, the

product and external devices should be turned off and unplugged.

• Supported HDMI Audio format (Depending

on model): True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz /

44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz /

192 kHz)

ENGLISH_index

• → → [Picture] → [Additional

Settings] → [HDMI Ultra HD Deep Colour] (Only NANO80*, NANO81*)

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 50/60 Hz (4:2:0)

(Except for NANO80*, NANO81*)

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),

<3,4 port Only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Colour] setting to off.

USB

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

• The external device connection may differ

from the model.

• Connect external devices to the TV regardless

of the order of the TV port.

• If you record a TV program on a Blu-ray/DVD

recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

• Refer to the external equipment’s manual

for operating instructions.

• If you connect a gaming device to the TV, use

the cable supplied with the gaming device.

Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

ENGLISH_index

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear.

• In PC mode, some resolution settings

may not work properly depending on the graphics card.

• If ULTRA HD content is played on your PC,

video or audio may become disrupted intermittently depending on your PC’s performance. (Depending on model)

• When connecting via a wired LAN, it is

recommended to use a CAT 7 cable. (Only when port is provided.)

Using Button

Basic functions

Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3)

1 All running apps will close, and any recording

in progress will stop. (Depending on country)

2 You can access and adjust the menu by

pressing the button when TV is on.

3 You can use the function when you access

menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Turns the power off. Changes the input source.

You can simply operate the TV functions, using the button.

Adjusts the volume level.

Scrolls through the saved

programmes.

ENGLISH_index

Using Magic Remote Control

(Depending on model) The descriptions in this manual are based on

the buttons on the remote control. Please read this manual carefully and use the TV correctly.

When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the battery.

To replace batteries, open the battery cover, replace batteries (1.5VAA) matching the

and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV.

(Some buttons and services may not be provided depending on models or regions.)

ENGLISH_index

To use the button, press and hold for

more than 1 second.

(POWER) Turns the TV on or off.

/ You can turn your set-top box on or

off by adding the set-top box to the universal remote control for your TV.

Number buttons Enters numbers.

Accesses the [Quick Help].

(DASH) Inserts a between numbers

such as 2-1 and 2-2.

/ Accesses the saved programmes list.

(MORE ACTIONS) Displays more remote

control functions.

Edits QUICK ACCESS

- QUICK ACCESS is a feature that allows you to enter a specified app or Live TV directly by pressing and holding the number buttons.

Audio descriptions function will be

enabled.

Adjusts the volume level.

(MUTE) Mutes all sounds.

(MUTE) Accesses the [Accessibility] menu.

Scrolls through the saved

programmes.

(Voice recognition) Network connection

is required to use the voice recognition function.

Check for recommended content. (Some recommended services may not be available in some countries.)

(Voice recognition) Speak while

pressing and holding the button to use the voice recognition feature.

(HOME) Accesses the Home menu.

(HOME) Shows the previous history.

(Q. Settings) Accesses the Quick Settings.

(Q. Settings) Displays the [All Settings]

menu.

Wheel (OK) Press the center of button

to select a menu. You can change programmes by using button.

(up/down/left/right) Press

the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.

/ Returns to the previous level.

/ Clears on-screen displays and

returns to last input viewing.

/ Shows programme guide.

Streaming Service buttons Connects to

the Video Streaming Service.

(INPUT) Changes the input source.

(INPUT) Accesses the [Home

Dashboard].

Displays the set-top box Home menu.

- When you are not watching via a set-top box: the display changes to the set-top box screen.

, , , These access special

functions in some menus.

Runs the record function.

, (Control buttons) Controls media

contents.

ENGLISH_index

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn

the TV on.

2 Point the Magic Remote at your TV and press

the Wheel (OK) on the remote control.

* If the TV fails to register the Magic Remote, try

again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the / and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

* Press and hold the / button for

more than 5 seconds to disconnect and reregister the Magic Remote at the same time.

• Do not mix new batteries with old

batteries. This may cause the batteries to overheat and leak.

• Failure to match the correct polarities

of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.

• This apparatus uses batteries. In

your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Batteries inside or inside the product

shall not be exposed to excessive heat such as sunshine, fire or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in the product.

• To open the USER GUIDE → →

[Support] → [User Guide]

ENGLISH_index

Troubleshooting

Cannot control the TV with the remote control.

• Check the remote control sensor on the

product and try again.

• Check if there is any obstacle between the

product and the remote control.

• Check if the batteries are still working and

properly installed ( to , to ).

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a

wall outlet.

• Check if there is a problem in the wall outlet

by connecting other products.

The TV turns off suddenly.

• Check the power control settings. The power

supply may be interrupted.

• Check if the auto-off function is activated on

the settings related time.

• If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes

of inactivity. When connecting to the PC (HDMI), no signal is detected.

Abnormal Display

• If the product feels cold to the touch, there

may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

• This panel is an advanced product that

contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and colour

of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel.

It is not related with the product performance, and it is not malfunction.

• Displaying a still image for a prolonged

period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

• Turn the TV off/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

ENGLISH_index

Generated Sound

• “Cracking” noise: A cracking noise that

occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A

low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

• When cleaning the product, be careful

not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending on model)

• Make sure to wring any excess water or

cleaner from the cloth.

• Do not spray water or cleaner directly

onto the TV screen.

• Make sure to spray just enough of

water or cleaner onto a dry cloth to wipe the screen.

ENGLISH_index

Specifications

(Depending on country)

Broadcasting Specifications

Digital TV Analogue TV

Television

system

DVB-S/S2

DVB-S/S2 DVB-T/T2

DVB-C

DVB-T/T2

PAL/SECAM

B/G/I/D/K

SECAM L

VHF III : 174 ~ 230

MHz

UHF IV : 470 ~ 606

Channel

coverage

(Band)

950~2150

MHz

46 ~ 890 MHz

MHz

UHF V : 606 ~ 862

MHz

46 ~ 862 MHz

S Band II : 230 ~

300 MHz

S Band III : 300 ~

470 MHz

Maximum

number of

storable

6000 3000

programmes

External antenna

impedance

CI Module (W x

H x D)

100.0mm x 55.0mm x 5.0mm

75 Ω

1 Only DVB-T2/C/S2 support model only.

ENGLISH_index

(Only NANO80*, NANO81*)

Wireless module(LGSBWAC02)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz 5725 to 5850 MHz

Bluetooth

Frequency range Output power(Max.)

2400 to 2483.5 MHz 8.5 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm between the device and the body.

* IEEE 802.11ac is not available in all countries.

(Except for NANO80*, NANO81*)

Wireless module(LGSBWAC92)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

17 dBm 19 dBm

10.5 dBm

2400 to 2483.5 MHz

5150 to 5725 MHz 5725 to 5850 MHz

Bluetooth

Frequency range Output power(Max.)

2400 to 2483.5 MHz 8 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm between the device and the body.

* IEEE 802.11ac is not available in all countries.

18 dBm 18 dBm 12 dBm

+ 48 hidden pages