LG 55LV75A User Manual [ru]

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating your set and retain it for future reference.

MONITOR SIGNAGE MODELS

55LV75A 55LV77A

www.lg.com

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

ENG

4 LICENSES

5 ASSEMBLING AND

5 Accessories

6 Parts

7 To Install in a Portrait Layout

7 Remove L-brackets before Installation

8 STORAGE METHOD FOR PANEL

8 - Correct Method

8 - Incorrect Method

9 Installing on a Wall

11 EXTERNAL EQUIPMENT SETUP

11 - IR RECEIVER

12 Tiling Displays

12 - How to Mount the Set

13 - How to Join Sets

14 REMOTE CONTROL

PREPARING

PROTECTION

25 ENTERTAINMENT

25 - Connecting to a Wired Network

26 - Network Status

27 - Connecting USB Storage Devices

28 - Browsing Files

30 - Viewing Movies

33 - Viewing Photos

36 - Listening to Music

38 - Viewing the Contents List

39 - DivX® VOD Guide

40 - Using PIP/PBP

41 CUSTOMIZING SETTINGS

41 Accessing the Main Menus

42 - PICTURE Settings

45 - AUDIO Settings

46 - TIME Settings

47 - OPTION Settings

52 Picture ID

53 - NETWORK Settings

16 Displaying the Device Name Connected

to an Input Port

17 USING THE MONITOR SET

17 Connecting to a PC

17 - RGB Connection

18 - DVI Connection

18 - HDMI Connection

19 - Display Port Connection

19 - IR Receiver Connection

20 Adjusting the Screen

20 - Selecting an Image Mode

20 - Customizing Image Options

21 - Customizing PC Display Options

22 Using Additional Options

22 - Adjusting Aspect Ratio

24 - Using the Input List

54 MAKING CONNECTIONS

55 External Device Connection

55 - DVI Connection

55 - HDMI Connection

56 - Component Connection

56 - AV(CVBS) Connection

57 - Audio Connection

57 Connecting to the LAN

57 Connecting to a USB

58 Daisy Chain Monitors

59 - Using the Multi Display Mode function

60 TROUBLESHOOTING

62 SPECIFICATIONS

66 IR CODES

67 CONTROLLING THE MULTIPLE

PRODUCT

67 Connecting the cable

67 RS-232C Configurations

67 Communication Parameter

68 Command Reference List

70 Transmission / Receiving Protocol

TABLE OF CONTENTS

ENGLISH

ENG

LICENSES

ENGLISH

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

NOTE

Product damage from moving or changing the installation location is not covered by warranty.

The warranty will not cover any damages caused by using the product in an excessively dusty

environment.

ASSEMBLING AND PREPARING

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

CD (Owner's Manual) /

Cards

Power Cord IR Receiver RS-232C Cable

ENGLISH

ENG

Remote Control

and Batteries

M4 x 6L

Screws (8 ea)

DP Cable

M6 x 10L

Screws (4 ea)

Tiling Guide (4 ea)

Mounting Cable Tie (2 ea)

(For Cable Arrangement)

CAUTION

Do not use any pirated items to ensure the safety and product life span.

Any damages or injuries by using pirated items are not covered by the warranty.

NOTE

The accessories supplied with your product may vary depending on the model.

Product specifications or contents in this manual may be changed without prior notice due to upgrade

of product functions. SuperSign SW & Manual

- Downloading from the LG Electronics website.

- Visit the LG Electronics website (https://www.lgecommercial.com/supersign) and download the latest software for your model.

ASSEMBLING AND PREPARING

ENGLISH

Parts

ENG

ASSEMBLING AND PREPARING

To Install in a Portrait Layout

When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).

Remove L-brackets before Installation

Remove the L-brackets from each corner of the monitor before installing it.

ENGLISH

ENG

NOTE

Keep the removed L-brackets and use them when moving the monitor later.

ASSEMBLING AND PREPARING

ENGLISH

STORAGE METHOD FOR PANEL PROTECTION

ENG

Correct Method Incorrect Method

If the product needs to be set upright, hold both sides of the product, and tilt backward carefully for. Do not let the panel not to touch the floor.

Panel

If the product is tilted onto the bezel, the bottom of the panel may be damaged.

Panel

When laying down the product, lay a cushion on a flat floor. Put the product on it with the panel of the product facing down.

Cushion

Panel

If there is not a cushion available, ensure the floor is clean and then lay the product down carefully with the panel facing either upward or downward. At this time, be careful for objects not to fall on the panel.

Panel

If the product is tilted onto the edge of the panel, the panel may be damaged.

ASSEMBLING AND PREPARING

Installing on a Wall

To install the Monitor on a wall (optional),

use the VESA screws provided as accessories to fasten it.

10 cm

20 cm

10 cm

Install the monitor at least 10 cm away from the wall and leave about 20 cm of space at each side of the monitor to ensure sufficient ventilation. Use the wall mount plate and screws that comply with the VESA standard.

10 cm

CAUTION

Disconnect the power cord first, and then

move or install the monitor set. Otherwise electric shock may occur. If you install the monitor set on a ceiling or

slanted wall, it may fall and result in severe injury. Do not over tighten the screws as this may

cause damage to the monitor set and void your warranty. Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. To prevent injury, this apparatus must be

securely attached to the wall in accordance with the instrallation instructions. (This only pertains to Australia and New Zealand.)

ENGLISH

ENG

NOTE

Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. If there is no other option but to mount the product on

the wall, make sure that sufcient ventilation

is provided before installation.

- Failure to do so may result in a re due to

the increase in the internal temperature.

ASSEMBLING AND PREPARING

ENGLISH

ENG

(Depending on model)

Securing the product to a wall (optional)

Insert and tighten the eye-bolts, or product

brackets and bolts on the back of the product.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

WARNING

If a product is not positioned in a sufficiently

stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

»Using cabinets or stands recommended

by the manufacturer of the product.

»Only using furniture that can safely

support the product.

»Ensuring the product is not overhanging

the edge of the supporting furniture.

»Not placing the product on tall furniture

(for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support.

»Not standing the product on cloth or other

materials placed between the product and supporting furniture.

»Educating children about the dangers of

climbing on furniture to reach the product or its controls.

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the eye-bolts on the rear of the product.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

Make sure that children do not climb on or

hang on the product.

NOTE

Use a platform or cabinet that is strong and

large enough to support the product securely. Brackets, bolts, and ropes are optional. You

can obtain additional accessories from your local dealer. The illustration shows a general example of

installation and may look different from the actual product.

ASSEMBLING AND PREPARING

EXTERNAL EQUIPMENT SETUP

IR RECEIVER

This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable.

ENGLISH

ENG

ASSEMBLING AND PREPARING

ENGLISH

Tiling Displays

ENG

How to Mount the Set

Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.

Example of 2 x 2 Tiling

Screws for attaching the

VESA wall mount (M6)

400

600

ASSEMBLING AND PREPARING

How to Join Sets

1 Join other sets using screws for xing the VESA wall mount in the same way as above.

Set 4 joined to the rest of the sets (2 x 2 tiling)

2 After joining the sets, use the tiling guide to adjust the gap between the sets.

ENGLISH

ENG

3 Now the 2 x 2 tiling is complete.

You can tile in various combinations, such as 3 x 3.

NOTE

The load applied to each set should be supported by the wall mount plate or the wall using a VESA

wall mount (600 x 400). The load applied to each set should be supported by the wall mount plate using a VESA wall mount.

(Each set must be firmly mounted to the wall mount plate or the wall.) You may mount the set without using the tiling guide; this does not affect the performance of the

device. The screws are enclosed with the other components in the box, including the tiling guides.

REMOTE CONTROL

ENGLISH

REMOTE CONTROL

ENG

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this

may damage the remote control. Make sure to point the remote control to the

remote control sensor on the monitor set.

(POWER)

Turns the monitor set on or off.

MONITOR ON

Turn on the monitor.

MONITOR OFF

Turn off the monitor.

ENERGY SAVING( )

Adjusts the brightness of the screen to reduce energy consumption.

INPUT

Selects the input mode.

1/a/A Button

Toggles between numerical

and alphabetical.

ARC

Selects the Aspect Ratio

Mode.

Volume Up / Down

This button does not apply to

this model.

PSM

Selects the Picture Status

Mode.

MUTE

Mutes all sounds.

This button does not apply to this model.

Number and Alphabet Buttons

Enters numerical or alphabetical characters depending on the setting.

CLEAR

Deletes the entered numerical or alphabetical character.

BRIGHTNESS Key

Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list.

REMOTE CONTROL

ENGLISH

ENG

INFO

Displays the input

information.

SETTINGS

Accesses the main menus

or saves your input and exit

menus.

Selects menus or options and

confirms your input.

BACK

Allows the user to move back

one step in user interaction

function.

Allows you to control various

multimedia devices simply

by using the remote control

through the SimpLink menu.

(It may not be supported

depending on the model.)

ⓘ

AUTO

Automatically adjusts picture position and minimizes image instability.(RGB input only)

W.BAL

Enters the White Balance menu.

S.MENU

(SuperSign Menu Key)

This button does not apply to this model.

Navigation Buttons

Scrolls through menus or options.

EXIT

Clears all on-screen displays and returns to Monitor set viewing from any menu.

TILE

Selects the TILE Mode.

ID ON/OFF

When the number of Picture

ID is equal to Set ID you can

control the monitor which

you want in the multi display

condition.

USB Menu control buttons

Controls media playback.

REMOTE CONTROL

ENGLISH

Displaying the Device Name Connected to an Input Port

ENG

Display which devices are connected to which external input ports.

1 Access the Input list screen and press the blue

2 You can assign an input label for every input

(input label) button on the remote control.

except USB.

Input Label

NOTE

External inputs supported: HDMI, DVI-D,

Display Port Labels available: PC, DTV

The input labels are displayed on the Input

Label screen or at the top left of the screen when you change the external input setting. For DTV/PC-compatible signals, such as

1080p 60 Hz, the screen settings may change according to the input label. The Just Scan option is available if a PC is connected as an external device.

HDMI

DVI-D

Display Port

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play* feature.

* Plug & Play: A PC will have a built-in driver for the monitor, no extra software is needed.

NOTE

It is recommended to use the monitor set

with the HDMI connection for the best image quality. To comply with the specifications of the

product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI/HDMI cable. If you turn the monitor set on when the set

becomes cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear

on the screen. This is normal. To minimize the impact of electromagnetic

waves, secure the cables with cable ties.

RGB Connection

Transmits the analog video signal from your PC to the monitor set. Connect the PC and the Monitor set with the 15-pin signal cable as shown the following illustrations. Select RGB input.

included)

(not

ENGLISH

ENG

Back of the product.

15-pin D-Sub Signal Cable (Max 3m)

Macintosh Adapter (not included)

(not included)

CAUTION

Connect the signal

input cable and tighten it by turning the screws clockwise.

Do not press the screen with your finger for

a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the

screen for a long period of time to prevent image burn. Use a screensaver if possible.

PC/ MAC

NOTE

Use the standard

Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)

Apple computers may require an adapter to

connect to this monitor. Call or visit their web site for more information.

USING THE MONITOR SET

DVI Connection

ENGLISH

ENG

Transmits digital video signal from your PC to the monitor set. Connect the PC and the monitor set with the DVI cable as shown the following illustrations. Select DVI input.

(not

included)

HDMI Connection

Transmits digital video and audio signals from your PC to the monitor set. Connect the PC and the monitor set with the HDMI cable as shown in the following illustrations. Select HDMI input.

Back of the product. Back of the product.

(not included)

PC PC

NOTE

Use a High Speed HDMI™ Cable.

Please check the PC environment if you

cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI-PC mode, you must

set the input label to PC mode. When HDMI PC is used, a compatiblity

problem could occur.

USING THE MONITOR SET

Display Port Connection

Transmits digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations. Select Display Port input source.

IR Receiver Connection

Allows the use of IR receiver extension.

Back of the product.Back of the product.

ENGLISH

ENG

NOTE

Sound may not be available depending on

the DP version of your PC.

USING THE MONITOR SET

ENGLISH

Adjusting the Screen

ENG

Selecting an Image Mode

Display images in its optimized settings by selecting one of the preset image modes.

Press

SETTINGS

to access the main menus.

Press the navigation buttons to scroll to

PICTURE

and press OK.

Press the navigation buttons to scroll to

Picture Mode

and press OK.

Press the navigation buttons to scroll to an

image mode you want and press OK.

Mode Description

Vivid

Standard

Cinema

Sport

Game

When you are finished, press

Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness.

Adjusts the image for the normal environment.

Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater.

Optimizes the video image for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue.

Optimizes the video image for a fast gaming screen such as PCs or games.

EXIT

When you return to the previous menu, press

BACK

Customizing Image Options

Customize basic and advanced options of each image mode for the best screen performance.

Press

Press the navigation buttons to scroll to

Press the navigation buttons to scroll to an

Select and adjust following options, and then

Backlight

Contrast

Brightness

Sharpness

Color

Tint

Color Temp.

Advanced Control

Picture Reset

SETTINGS

PICTURE

and press OK.

Picture Mode

to access the main menus.

and press OK.

image mode you want and press OK.

press OK.

Option Description

Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss.

Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated.

Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated.

Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.

Adjusts intensity of all colors.

Adjusts the balance between red and green levels.

Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.

Customizes the advanced options. Refer to the Advanced image options.

Restores the options to the default setting.

When you are finished, press

EXIT

When you return to the previous menu, press

BACK

Customizing PC Display Options

Customize options of each image mode for the best image quality.

This function works in the following mode:

RGB [PC] mode.

USING THE MONITOR SET

ENGLISH

ENG

Press

Press the navigation buttons to scroll to

Select and adjust following options, and then

Resolution

Auto Config.

Position/ Size/Phase

Reset

When you are finished, press

SETTINGS

PICTURE

and press OK.

press OK.

Option Description

When you return to the previous menu, press

BACK

and press OK.

Selects a proper resolution.

Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress.

Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration.

Restores the options to the default setting.

to access the main menus.

Screen

EXIT

USING THE MONITOR SET

ENGLISH

Using Additional Options

ENG

Adjusting Aspect Ratio

Resize the image to view the image at its optimal size by pressing

ARC

while you are watching Monitor set.

CAUTION

If a fixed image displays on the screen for a long period of time, it could be imprinted and become

a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area

of the screen.

NOTE

You can also change the image size by accessing the main menus.

MODE

Aspect Ratio

16:9

Just Scan

1:1

4:3

Zoom

Cinema Zoom 1~16

AV Component RGB DVI-D HDMI Display Port

PC DTV PC DTV PC DTV PC

o o o o o o o o o

x o x o x o x o x

x x o x o x o x o

o o o o o o o o o

o o x o x o x o x

USING THE MONITOR SET

16:9

: This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).

Just Scan

- the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge.

: This Selection will allow you view

4:3

: This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen.

Zoom

: This selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

ENGLISH

ENG

Just Scan

1:1

: The aspect ratio is not adjusted from the original. (Only Display Port PC, HDMI PC, DVI-D PC, RGB PC)

Cinema Zoom 1~16

- when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted.

: Choose Cinema Zoom

Using the Input List

ENGLISH

ENG

USING THE MONITOR SET

Selecting an Input Source

Press

Press the navigation buttons to scroll to one of

INPUT

to access the input source list.

the input sources and press OK.

Input source Description

Component

RGB

HDMI

DVI-D

Display Port

USB

Watch video from a VCR or other external devices.

Watch the content from a DVD or other external devices, or through a digital set-top box.

View a PC display on the screen.

Watch contents from a PC, DVD of Digital set-top box other high definition devices.

View a PC display on the screen.

Watch contents in a PC, DVD of Digital set-top box other high definition devices.

Plays the multimedia file saved in the USB.

ENTERTAINMENT

Connecting to a Wired Network

Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. Only supports wired network connection. After making a physical connection, a small number of networks may require the display network settings to be adjusted. For most networks, the display will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.

LAN

Router

LAN WAN

ENGLISH

ENG

To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything),

1 Press SETTINGS to access the main menus.

2 Press the navigation buttons to scroll to NET-

WORK and press OK.

3 Press the navigation buttons to select Network

Setting and press OK.

4 If you already set Network Setting, select

Resetting. The new connection settings resets

the current network settings.

5 Select IP Auto Setting or IP Manual Setting.

- IP Manual Setting: Press the navigation and

number buttons. IP addresses will need to be input manually.

- IP Auto Setting: Select this if there is a

DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined.

Internet

Cable modem

ETHERNET

CAUTION

y Do not connect a modular phone cable to

the LAN port.

y Since there are various connection meth-

ods, please follow the specifications of your telecommunication carrier or internet service provider.

6 When you are finished, press EXIT.

CAUTION

y Network setting menu will not be avail-

able until the display connected to physical network.

y Since there are various connection meth-

ods, please follow the specifications of your telecommunication carrier or internet service provider.

ENTERTAINMENT

ENGLISH

ENG

NOTE

y If you want to access the Internet directly on

your display, the Internet connection should always be on.

y If you cannot access the Internet, check

the network conditions from a PC on your network.

y When you use Network Setting, check the

LAN cable or check if DHCP in the router is turned on.

y If you do not complete the network settings,

the network may not work properly.

Tips for Network Setting

y Use a standard LAN cable with this display.

Cat5 or better with a RJ45 connector.

y Many network connection problems during set

up can often be fixed by re-setting the router or modem. After connecting the display to the network, quickly power off and/or disconnect the power cable of the network router or cable modem. Then power on and/or connect the power cable again.

y Depending on the Internet service provider

(ISP), the number of devices that can receive Internet service may be limited by the applicable terms of service. For details, contact your ISP.

y LG is not responsible for any malfunction of the

display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.

y LG is not responsible for problems within your

internet connection.

y You may experience undesired results if the

network connection speed does not meet the requirements of the content being accessed.

y Some internet connection operations may not

be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

y Any fees charged by an ISP including, without

limitation, connection charges are your responsibility.

y A 10 Base-T or 100 Base-TX LAN port is

required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

y A DSL modem is required to use DSL service

and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

y The use of a “Router” may not be allowed or its

usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1 Press SETTINGS to access the main menus.

2 Press the navigation buttons to scroll to

NETWORK and press OK.

3 Press the navigation buttons to select

Network Status.

4 Press OK to check the network status.

5 When you are finished, press EXIT.

Option Description

Setting Return to the network setting menu.

Test

Close Return to the previous menu.

Test the current network status after set-

ting the network.

+ 59 hidden pages