LG 55LB5800 Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your set and retain it for future reference.

	*MFL68027981*	www.lg.com
		P/NO : MFL68027981 (1505-REV01)

<![if ! IE]>

<![endif]>ENGLISH

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions.

Keep these instructions.

Follow all instructions.

Heed all warnings.

yy Do not use this apparatus near water.

yy Clean only with dry cloth.

yy Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yy Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

yy Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

yy Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yy Only use attachments/accessories specified by the manufacturer.

2

yy Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yy Unplug this apparatus during lightning storms or when unused for long periods of time.

yy Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yy Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

yy Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

yy Keep the packing anti-moisture material or vinyl packing out of the reach of children. Antimoisture material is harmful if swallowed. If

swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yy CAUTION concerning the Power Cord (Can differ by country):

Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such

as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yy Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

yy Do not expose to dripping or splashing and do not place objects filled with liquids, such as

vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

yy Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by

connecting it to telephone wires, lightning rods, or gas pipes.

Power

Circuit Supply

Breaker

yy As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

yy Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

yy Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp

(NEC Section 810-20)

Electric Service

Grounding Conductor

Equipment

(NEC Section 810-21)

Ground Clamp

Power Service Grounding

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

yy Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.

yy Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

yy Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

yy If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yy Keep the product away from direct sunlight.

yy Never touch this apparatus or antenna during a lightning storm.

yy When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yy Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yy DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

yy Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

yy This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

yy Do not dispose of batteries in a fire.

yy Do not short circuit, disassemble, or allow the batteries to overheat.

yy Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper). This may result in product malfunction.

yy Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the performance and reliability of the TV.

yy Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does

not affect the performance and reliability of the product.

yy Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

yy Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

yy If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

4

Preventing image burn or burn-in on your TV screen

yy If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

yy If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

yy Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

CAUTION

yyDo not use any unapproved items to ensure the safety and product’s lifespan.

yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

yyWhen attaching the stand to the TV set, use the correct size screw for your model.

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.

Preparing

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual. yyThe available menus and options may differ

from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

yyThe items supplied with your product may vary depending upon the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.

yyUse an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

yyUse a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

yyRecommended HDMI cable types (3 m or less)

-High-Speed HDMI®/TM cable

-High-Speed HDMI®/TM cable with Ethernet

*A10 mm *B18 mm

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.

(Depending upon model)

AN-MR500	AG-F***	AN-VC5**
Magic Remote	Cinema 3D	Video Call
	Glasses	Camera
AG-F***DP	LG Audio	AN-WF500
Dual Play	Device	Wi-Fi/
Glasses
		Bluetooth
		DONGLE

<![if ! IE]>

<![endif]>ENGLISH

5

<![if ! IE]>

<![endif]>ENGLISH

Maintenance	yyHold the top and bottom of the TV frame firmly.
	Make sure not to hold the transparent part,
	speaker,	grille area.

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product lifespan.

CAUTION

yyMake sure to turn the power off and disconnect the power cord and all other cables first.

yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power Cord

Remove the accumulated dust or dirt on the power cord regularly.

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the

power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

yyUse at least two people to move a large TV.

yyWhen transporting the TV by

hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

yyWhen handling the TV, be careful not to damage the protruding joystick button.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyDo not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

yyDo not move the TV by holding the cable holder and cable management, as the cable holders may break, and injuries and damage to the TV may occur.

Using the Joystick Button

(Image shown may differ from your TV.)

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Joystick Button

Basic functions

When the TV is turned off, place your finger on the joystick button

and press it once and release it.

Power On

6

				When the TV is turned on, place
				your finger on the joystick button
				and press it once for a few seconds
				and release it. (However, if the Menu
				button is on the screen, pressing
	Power Off			and holding the joystick button will
				let you exit the Menu.)
				If you place your finger over the
				joystick button and move it left or
				right, you can adjust the volume
	Volume Control level.
				If you place your finger over the
				joystick button and move it up or
	Channels			down, you can scroll through the
				saved channels you want.
	Control

NOTE

yyMove the joystick button up, down, left, or right. Be careful not to press it. If you press it first, you may not be able to adjust the volume or scroll through the channels.

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items ( , , , ) moving the joystick button up, down, left, or right.

TV off Turns the power off.

Settings Accesses the main menu.

	Close	Clears on-screen displays and
		returns to TV viewing.
	Input	Changes the input source.
	List

Mounting on a Table

(Image shown may differ from your TV.)

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm
10 cm
10	cm

2 Connect the power cord to a wall outlet.

CAUTION

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a Wall (optional)

(Depending upon model)

(Image shown may differ from your TV.)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

CAUTION

yyMake sure that children do not climb on or hang on the TV.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

<![if ! IE]>

<![endif]>ENGLISH

7

<![if ! IE]>

<![endif]>ENGLISH

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

10 cm

10 cm 10 cm

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model			32LB570B	42LB5800
			32LB580B	47LB5800
			39LB5800	55LB5800
VESA (A x B)			200 x 200	400 x 400
	A
B
Standard screw			M6	M6
Number of screws			4	4
Wall mount bracket			LSW240B	LSW440B
(optional)			MSW240	MSW240
Model			60LB5800
VESA (A x B)			400 x 400
	A
B
Standard screw			M6
Number of screws			4
Wall mount bracket			LSW440B
(optional)

CAUTION

yyDisconnect the power before moving or installing the TV. Otherwise electric shock may occur.

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending upon the wall mount. Make sure to use the proper length.

yyFor more information, refer to the manual supplied with the wall mount.

yyWhen attaching a wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Use only when provided with your particular model. )

Provided Item

Wall Mount Spacer

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

8

NOTE

yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. yyThe external device connections may differ from

the model.

yyConnect external devices to the TV regardless of the order of the TV port.

yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device.

yyRefer to the external equipment’s manual for operating instructions.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The RF cable may not be supplied, depending upon the model.

CAUTION

yyMake sure not to bend the copper wire of the RF cable.

Copper wire

yyComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

yyTo improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

yyUse a signal splitter to use 2 TVs or more.

yyIf the antenna is not installed properly, contact your dealer for assistance.

yyDTV Audio Supported Codec: MPEG, Dolby digital, AAC, HE-AAC

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided.

Remote Control

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries,

as this may damage the remote control. yyThis remote uses infrared light. When in use, it

should be pointed in the direction of the TV’s remote sensor.

A

CAPTION GUIDE

Q.VIEW

A

(POWER) Turns the TV on or off.

Returns to the last TV channel.

Activates or deactivates the subtitles.

Displays the program event according to time scheduler.

Resizes an image.

Changes the input source. Turns the TV on if it is off.

Number button Enters numbers.

<![if ! IE]>

<![endif]>ENGLISH

9

- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program. Mutes all sounds.

Scrolls through the saved channels.
Moves to the previous or next screen.
SMART	MY APPS	B

REC

<![if ! IE]>

<![endif]>ENGLISH

B

Accesses the AV devices connected to the TV; Opens the SIMPLINK menu.

Accesses the Home menu.

Shows the list of Apps.

Accesses the main menu.

Accesses the quick menu.

Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV viewing.

Soccer AV mode on or off.

Adjusts Time Machine mode.

Control buttons Controls the SIMPLINK compatible devices (USB, SIMPLINK). ( , , , , )

Returns to the LIVE TV.

Color buttons These access special functions in some menus.

( Red, Green, Yellow, Blue)

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visithttp://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request [e-mail] . This offer is valid for three

(3) years from the date on which you purchased the product.

External Control Device

Setup

To obtain the external control device setup information, please visitwww.lg.com .

10