LG 55LA9700-TA, 55LA970Y-TA, 65LA9700-TA, 65LA970Y-TA, 84LA9800-TA Owner's Manual

OWNER’S MANUAL

LED TV

*

Please read this manual carefully before operating
your set and retain it for future reference.

* Disclaimer

www.lg.com

LA79**
LA86**
LA96**
LA97**
LA98**

LG LED TV applies LCD screen with LED backlights.

P/NO : MFL67706412 (1306-REV05)
Printed in Korea

2

ENG

ENGLISH

TABLE OF CONTENTS

TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

8 Viewing 3D Imaging (Only 3D models)

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking
13 Separate purchase
14 Parts and buttons
15 Lifting and moving the TV
16 Setting up the TV
16 - Attaching the stand
18 Mounting on a table
20 Mounting on a wall
21 Tidying cables
22 Using Sliding Speaker
22 Using Built-in Camera
23 - Preparing Built-in Camera
23 - Name of Parts of Built-in Camera
23 - Checking the Camera’s Shooting

Range

24 MAKING CONNECTIONS

24 Antenna connection
25 HDMI connection
25 Headphone connection
26 DVI to HDMI connection
26 Component connection
27 Composite connection
27 Audio connection
27 - Digital optical audio connection
28 USB connection
28 MHL connection

29 REMOTE CONTROL

31 MAGIC REMOTE CONTROL

FUNCTIONS

33 Registering Magic Remote Control
33 How to use Magic Remote Control
33 Precautions to Take when Using the

Magic Remote Control

34 USING THE USER GUIDE

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a
possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product may
be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

35 MAINTENANCE

35 Cleaning your TV
35 - Screen, frame, cabinet and stand
35 - Power cord

35 TROUBLESHOOTING

36 ENVIRONMENTAL INFORMATION

36 WEEE

37 SPECIFICATIONS

44 LICENSES

44 OPEN SOURCE SOFTWARE

NOTICE

44 EXTERNAL CONTROL DEVICE

SETUP

3

ENGENGLISH

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control
in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a
bathroom

- Near any heat source such as stoves
and other devices that produce heat

- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric
shock, malfunction or product deformation.

y

Do not place the product where it might be
exposed to dust.
This may cause a fire hazard.

y

Mains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.

y

Do not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.

y

Make sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which
are not grounded on earth.) Otherwise
possibility you may be electrocuted or
injured.

y

Insert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.

y

Ensure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.

y

Do not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or electric
shock.

y

Bend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside the
Product and could give an electric shock.

y

When mounting TV onto wall make sure to
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.

y

Do not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.

y

Keep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.

Desiccant

y

Do not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.

y

Dispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek Doctor­Medical Attention immediately if child
consumes batteries.

y

Do not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
electrocuted. (Depending on model)

y

Do not put or store inflammable
substances near the product. There is a
danger of combustion/explosion or fire due
to careless handling of the inflammable
substances.

y

Do not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service centre.

y

Do not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric shock
accident can occur.

y

Do not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.

y

Never touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.

y

Never touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.

y

Do not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

If any of the following occur, unplug the
product immediately and contact your
local service centre.

- The product has been impacted by
shock

- The product has been damaged

- Foreign objects have entered the
product

- The product produced smoke or a
strange smell

This may result in fire or electric shock.

y

Unplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.

y

Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.

CAUTION

y

Install the product where no radio wave
occurs.

y

There should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.

y

Do not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.

y

If you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may
fall over, which may cause injury.

y

If you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of the
product. When you install the set to use
the wall mounting bracket (optional parts),
fix it carefully so as not to drop.

y

Only use the attachments / accessories
specified by the manufacturer.

y

When installing the antenna, consult with a
qualified service technician. If not installed
by a qualified technician, this may create
a fire hazard or an electric shock hazard.

y

We recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.

y

Only use the specified type of battery.
This could cause damage to the remote
control.

y

Do not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.

y

Batteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.

y

Do not place non-rechargeable batteries
in charging device.

y

Make sure there are no objects between
the remote control and its sensor.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Signal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.

y

When connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.

y

Do not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.

y

Please follow the installation instructions
below to prevent the product from
overheating.

- The distance between the product and
the wall should be more than 10 cm.

- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).

- Do not install the product on a carpet or
cushion.

- Make sure the air vent is not blocked by
a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.

y

Periodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.

y

Prevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.

y

Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.

y

Do not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.

y

Avoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.

y

When cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).

y

As long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.

7

ENGENGLISH

SAFETY INSTRUCTIONS

y

When unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.

y

When moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.

y

When moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.

y

Contact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.

y

Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.

y

If the product feels cold to the touch, there
may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.

y

The panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in third­party products and is not subject to
exchange or refund.

y

You may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.

y

Displaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting
in retention of the image, which is known
as image sticking. The warranty does not
cover the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more hours
for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in third­party products and is not subject to
exchange or refund.

y

Generated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging (Only 3D
models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 ­15 minute breaks every hour. Viewing
3D contents for a long period of time
may cause headache, dizziness,
fatigue or eye strain.

Those that have a photosensitive

seizure or chronic illness

ySome users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

yDo not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or
blood pressure disease, etc.

y3D Contents are not recommended to

those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.

yIf your eyesight varies between your right

and left eye, revise your eyesight prior to
watching 3D contents.

Symptoms which require discontinuation

or refraining from watching 3D contents

yDo not watch 3D contents when you feel

fatigue from lack of sleep, overwork or
drinking.

yWhen these symptoms are experienced,

stop using/watching 3D contents and get
enough rest until the symptom subsides.

- Consult your doctor when the
symptoms persist. Symptoms may
include headache, eyeball pain,
dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience or fatigue.

CAUTION

Viewing Environment

y

Viewing Distance

- Maintain a distance of at least twice the
screen diagonal length when watching
3D contents. If you feel discomfort in
viewing 3D contents, move further away
from the TV.

Viewing Age

yInfants/Children

- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.

- Children under the age of 10 may
overreact and become overly excited
because their vision is in development
(for example: trying to touch the
screen or trying to jump into it. Special
monitoring and extra attention is
required for children watching 3D
contents.

- Children have greater binocular
disparity of 3D presentations than adults
because the distance between the eyes
is shorter than one of adults. Therefore
they will perceive more stereoscopic
depth compared to adults for the same
3D image.

yTeenagers

- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them
to refrain from watching 3D contens for
a long time when they are tired.

yElderly

- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.

Cautions when using the 3D glasses

y

Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos
properly.

y

Do not use 3D glasses instead of your

normal glasses, sunglasses or protective
goggles.

y

Using modied 3D glasses may cause eye

strain or image distortion.

y

Do not keep your 3D glasses in extremely

high or low temperatures. It will cause
deformation.

y

The 3D glasses are fragile and are easy

to be scratched. Always use a soft, clean
piece of cloth when wiping the lenses. Do
not scratch the lenses of the 3D glasses
with sharp objects or clean/wipe them with
chemicals.

9

ENGENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you

are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty.
ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

10

ENG

ENGLISH

ASSEMBLING AND PREPARING

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P

A

G

E

FAV

3D

MUTE

1 2 3

4 5 6

7 809

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

P

or

Remote control,
batteries (AAA)

(Depending on model)
(See p. 29, 30)

Magic remote
control, batteries
(AA)

(Depending on model)
(See p. 31, 32)

Owner’s manual Power Cord

(Depending on model)

Dual play glasses

(Depending on model)

Cinema 3D Glasses

The number of 3D
glasses may differ
depending on the
model or country.

Component video
cable

(See p. 26)

Composite video
cable

(See p. 27)

Tag On

or

Tag on

(Depending on model)

Isolator

(Depending on model)
(See p. 12)

Cable holder

(Depending on
model)
(See p. 21, 22)

Cable Management

2EA
(Only LA79**)
(See p. 21)

11

ENGENGLISH

ASSEMBLING AND PREPARING

Stand Screws

8EA, M4 x L14
(Only LA79**)
4EA, M4 x L14

(Only 55LA97**)

(See p. 16, 17)

Stand Screws

4EA, M4 x L16
(Only LA86**)
(See p. 16)

Stand Screws

4EA, M4 x L20
(Only LA96**,

LA98**)

(See p. 16, 18)

Stand Screws

6EA, M5 x L16
(Only LA98**)
(See p. 17)

Stand Base/ Stand
Body

(Only LA79**)
(See p. 16)

Stand Base

(Only LA86**, LA96**)
(See p. 16)

Stand Base

(Only LA97**)

(See p. 17)

Stand Base/ Stand
Body

(Only LA98**)
(See p. 17)

Wall mount inner
spacers

4EA

(Only LA97**)

(See p. 21)

Wall mount screws

4EA, M6 x L54

(Only 55LA97**)

(See p. 21)

Wall mount screws

4EA, M8 x L44

(Only 65LA97**)

(See p. 21)

12

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

yAntenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna

contact might be heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

or

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a

cable distribution system using coaxial cable, may in some circumstances create a re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

13

ENGENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.

P

AG-F***DP

Dual play glasses

AG-F***

Cinema 3D glasses

AN-MR400

Magic remote

Tag On

AN-VC5**

Video call camera

LG Audio device Tag on

Compatibility

LA79** LA86** LA96** LA97** LA98**

AG-F***DP

Dual play glasses

• • • • •

AG-F***

Cinema 3D glasses

• • • • •

AN-MR400

Magic remote

• • • • •

AN-VC5**

Video call camera

•

•

(Depending

on model)

•

LG Audio device

• • • • •

Tag on

• • • • •

The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Button Description

H

Scrolls through the saved programmes.

H

Adjusts the volume level.

H

Selects the highlighted menu option or confirms an input.

S Accesses the main menu, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

yYou can set the LG Logo light to on or off by selecting OPTION in the main menus.(Depending on model)

A type : LA79**

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor
LG Logo light

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor
Power Indicator

Built-in Camera

C type : LA97**

B type : LA86**, LA96**

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control sensor
LG Logo light

Built-in Camera
(Only 42/47/55/60LA86**,
LA96**)

D type : LA98**

SETTINGS

INPUT

OK

Screen

Buttons

Speakers

Remote control and
Intelligent sensors

1

LG Logo light

15

ENGENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the

box or packing material that the TV originally
came in.

yBefore moving or lifting the TV, disconnect

the power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

yWhen transporting a large TV, there should

be at least 2 people.

yWhen transporting the TV by hand, hold the

TV as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV

upright, never turn the TV on its side or tilt
towards the left or right.

yDo not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

LA86**, LA96**

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

1

2

3

1

2

Stand Base

M4 x L16, 4EA
(Only LA86**)

3

M4 x L14

4EA

LA79**

Stand Base

Stand Body

Front

M4 x L14

4EA

M4 x L20, 4EA
(Only LA96**)

17

ENGENGLISH

ASSEMBLING AND PREPARING

LA98**

2

3

Front

M5 x L16

6EA

LA97**

3

1

Stand Base

M4 x L14

4EA

2

Stand Body

Front

Stand Base

1

NOTE

yThe stand screws are already attached

at the back of the TV. Please use these
attached screws to assemble the TV and
stand. (Only 65LA97**)

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

4

CAUTION

yWhen attaching the stand to the TV

set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

yMake sure that the screws are fastened

completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with excessive
force otherwise they may be worn out
and become loose.

NOTE

yRemove the stand before installing the

TV on a wall mount by performing the
stand attachment in reverse.

Mounting on a table

1 Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from
the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

yDo not place the TV near or on sources

of heat, as this may result in fire or other
damage.

Adjusting the angle of the TV to suit view

(This feature is not available for all models.)

Swivel 15 degrees to the left or right and adjust
the angle of the TV to suit your view.
(Only LA79**)

1515

M4 x L20

4EA