LG 55EH5C-S Installation Guide [pt]
Easy Setup Guide
LG Digital
Signage
(MONITOR SIGNAGE)
https://youtu.be/6t5lcuROngM
After reading the manual, please keep it handy for future reference.
55EH5C
*MFL69588402*
(1906-REV04)
www.lg.com
Printed in Korea
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
ENGENGLISH
(Φ3 x L6) (Φ3 x L10)
FRONT
FRONT
R
22
16
22
16
22
R
16
R
22
R
16
(M3 x L4.5)
(M3 x L4.5)
(M4 x L10)
(M4 x L8)
AAA
You can download the web manuals for this product at the following websites.
(Keyword: EH5C)
• www.lg.com/id-manual
SuperSign: http://partner.lge.com
3
ENGENGLISH
4
ENGENGLISH
Network
5
ENGENGLISH
6
16
16
22
22
FRONT
R
R
ENGENGLISH
1 Open the product box, then remove the packaging materials and the T-con box in the order they appear.
2
T-con box
1
2 Connect the cables to the Signage box. At this stage, the HDMI cable with the label marked ‘FRONT’ must be
connected to the upper part and the Rear cable must be connected to the lower part.
In the case of 16/22 pin cables, connect the cable with the red mark to the upper part.
Connect the 16/22 pin cable with the longer neck to the display set.
3 Attach the 16/22 pin cables using the 2 screws (M3 x L4.5).
16
22
16
4 If installing onto a ceiling or wall, attach the mounting brackets to the Signage box using four screws (M4 x L8).
7
ENGENGLISH
5 Position the jack cover to fit the cables to the cut spaces and then attach it using the 2 screws (M3 x L4.5).
2
1
8
22
16
16
22
FRONT
6 Fold the connectors on the opposite side of the 16/22 pin cables to make them parallel to the cable.
ENGENGLISH
16
22
7 Insert the connectors of the 16/22 pin cables into the tubes.
16
22
8 Pass the cables through the hole in the middle of the SET.
FRONT
16
22
9 Connect the HDMI cable with the label marked ‘FRONT’ to the FRONT side. Insert the 16/22 pin cable with the red
22
FRONT
16
RR
16
22
mark to the cable holder and connect it using a screw (M3 x L4.5).
FRONT
22
16
RR
10
Connect the HDMI cable (without the label marked ‘FRONT’) to the REAR side. Insert the 16/22 pin cable (without
the red mark) to the cable holder and connect it using a screw (M3 x L4.5).
22
16
9
ENGENGLISH
11
When installing the product to a stand (excluding a ceiling mount or a wall mount), remove the 2 screws, change
the direction of the LG logo, and then reassemble it.
10
16
22
12
ENGENGLISH
13
Cover the FRONT side with the T-con box cover (with the IR receiver) and attach it using 4 screws (Φ3 x L6) on the
opposite side.
22
16
Cover the REAR side with the other T-con box cover and attach it using 2 screws (Φ3 x L10).
14
Attach the bottom part of the T-con cover using 6 screws (M4 x L10).
11
ENGENGLISH
Connect the power cable to the Signage box.
2
1
12
ENGENGLISH
1 2
3
4
13
1
2
0
ENGENGLISH
Dimensions (Width x
Height x Depth)
Dimensions (Width
x Height x Depth) /
Weight
Display 1227.6 mm x 702.7 mm x 8.9 mm
(48.3 inches x 27.6 inches x 0.3 inches)
Display + T-con box 1227.6 mm x 880.5 mm x 90.0 mm / 20.3 kg
(48.3 inches x 34.6 inches x 3.5 inches / 44.7 lbs)
Signage Box 482.1 mm x 460.0 mm x 75.0 mm / 8.0 kg
(18.9 inches x 18.1 inches x 2.9 inches / 17.6 lbs)
Make sure to read the Safety Precautions before using
the product.
The model and serial numbers of the SET are located on
the back and one side of the SET. Record it below should
you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or OFF this
device.
Loading...