LG 55EG9200, 65EG9600 user manuals [es]

OWNER’S MANUAL

Please read this manual carefully before operating your TV and retain it for future reference.

55EG9200 55EG9600 65EG9600

	*MFL68685918*	www.lg.com
		P/NO : MFL68685918 (1507-REV03)

2 IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

		The lightning flash with arrowhead
		symbol within an equilateral triangle is
		intended to alert the user to the presence of
		uninsulated dangerous voltage within the
	<![if ! IE]> <![endif]>ENGLISH	product’s enclosure that may be of sufficient
		magnitude to constitute a risk of electric shock
		to persons.
		The exclamation point within an
		equilateral triangle is intended to alert the
		user to the presence of important operating
		and maintenance (servicing) instructions in
		the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

••Do not allow the television to become wet.

••Clean only with a dry cloth.

••Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

••Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

••Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

3

••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

••Only use attachments/accessories specified by the manufacturer.

••Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

••Unplug this apparatus during lightning storms or when unused for long periods of time.

••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••CAUTION concerning the Power Cord (Can differ by country):

Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

••Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

<![if ! IE]>

<![endif]>ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate

circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power

Circuit Supply

Breaker

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp

(NEC Section 810-20)

Electric Service

Grounding Conductor

Equipment

(NEC Section 810-21)

Ground Clamp

Power Service Grounding

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

••Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

5

••Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper).

This may result in product malfunction.

••Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the performance and reliability of the TV.

••Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

••Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the plasma TV) to prevent image burn.

<![if ! IE]>

<![endif]>ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

Viewing 3D imaging

WARNING

Viewing Environment

••Viewing Time

-- When watching 3D content, take 5 to15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those who have a photosensitive seizure or chronic illness

••Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content.

••Do not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

••3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

••If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take more frequent breaks than the average adult.

••If your eyesight varies between your right and left eye, correct your eyesight prior to watching 3D content.

Symptoms which require discontinuation or refraining from watching 3D contents

••Do not watch 3D content when you feel fatigue from lack of sleep, overwork, or drinking.

••When these symptoms are experienced, stop using/watching 3D content and get enough rest until the symptom subsides.

-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, eyestrain, or fatigue.

CAUTION

Viewing Environment

••Viewing Distance

-- Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.

Viewing Age

••Infants / Children

-- Usage/ Viewing 3D content for children under the age of 5 is recommended.

-- Children under the age of 10 may overreact and become overly excited because their vision is in development, for example, trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.

-- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

••Teenagers

-- Teenagers may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

••Elderly

-- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

••Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

••Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.

••Using modified 3D glasses may cause eye strain or image distortion.

••Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

••The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION 7

LICENSES

Supported licenses may differ by model.

For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

NOTE

••Image shown may differ from your TV.

••Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

••The available menus and options may differ from the input source or product model that you are using.

••New features may be added to this TV in the future.

<![if ! IE]>

<![endif]>ENGLISH

8 TABLE OF CONTENTS

TABLE OF CONTENTS

2IMPORTANT SAFETY INSTRUCTIONS

6Viewing 3D imaging

7LICENSES

7OPEN SOURCE SOFTWARE NOTICE INFORMATION

8TABLE OF CONTENTS

9INSTALLATION PROCEDURE

	<![if ! IE]> <![endif]>ENGLISH	9	ASSEMBLING AND PREPARING
		9	Unpacking
		11	Optional Extras
		11	Parts and Buttons
		12	- Using the Joystick Button
		13	Lifting and Moving the TV
		13	Setting Up The TV
		13	-	Attaching the Stand
		16	-	Mounting on a Table
		16	-	Tidying Cables
		17	- Mounting on a Wall
		18	MAKING CONNECTIONS

18Connecting to an Antenna or Cable

19Connecting to an HD receiver, DVD Player, or VCR

19- HDMI Connection

20- DVI to HDMI Connection

21- Component Connection

22- Composite Connection

23Connecting to a PC

24- HDMI Connection or DVI to HDMI Connection

25Connecting to an Audio System

25- Digital Optical Audio Connection

26Connecting Headphones

27Connecting a USB Drive

28MAGIC REMOTE FUNCTIONS

29Registering Magic Remote

29 How to Use Magic Remote

29Precautions to Take When Using the Magic Remote

29USING THE USER GUIDE

30SPECIFICATIONS

31MAINTENANCE

31 Cleaning Your TV

31 - Screen, Frame, Cabinet, and Stand

31 - Power Cord

31 TROUBLESHOOTING

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9

INSTALLATION PROCEDURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

*When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

••Do not use any unapproved items to ensure the safety and lifespan of the product.

••Any damages or injuries by using unapproved items are not covered by the warranty.

••Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

NOTE

••The items supplied with your product may vary depending upon the model.

••Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

••For an optimal connection, HDMI cables and USB devices should have A bezels less than 10 mm thick and 18 mm width.

••Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

••Use a certified cable with the HDMI logo attached. If you do not use a

certified HDMI cable, the screen may not display or a connection error may occur.

••Recommended HDMI cable types (3 m or less)

-High-Speed HDMI®/TM Cable

-High-Speed HDMI®/TM Cable with Ethernet

A

*A10 mm *B18 mm

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Remote Control, Batteries (AA)

(See page 28.)

(For 55EG9200)

Stand Base

(See page 14.)

(For 55EG9200, 55EG9600)

Stand Screws

5 EA, M4 x L20 (See page 14.)

Dual Play Glasses

The number of Dual play glasses may differ depending upon the model or country.

(Depending upon model)

Owner’s Manual

(For 55EG9600)

Stand Base

(See page 14.)

(For 65EG9600)

Stand Screws

8 EA, M4 x L20 (See page 15.)

Component Video Cable

(See page 21.)

Cable Holder

(See page 16.)

(For 65EG9600)

Stand Base

(See page 15.)

Cinema 3D Glasses

The number of 3D glasses may differ depending upon the model or country.

Composite Video Cable

(See pages 21 and 22.)

ASSEMBLING AND PREPARING 11

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with certain models.

The model name or design may be changed due to the manufacturer’s circumstances or policies.

AN-MR6**		AG-F***DP		AG-F***
Magic Remote		Dual Play Glasses		Cinema 3D Glasses
AN-VC550		LG Audio Device
Smart Camera

Parts and Buttons

Screen

Speakers

<![if ! IE]>

<![endif]>ENGLISH

Remote Control Sensor and	Joystick Button	2
Intelligent Sensor1
Power Indicator (For EG9200 series)
LG Logo Light (For EG9600 series)

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. (For EG9600 series)

2 Joystick button is located below the screen of TV.

NOTE

••You can set the LG Logo Light to be on or off by selecting GENERAL in the main menus. (For EG9600 series)

12 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Using the Joystick Button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic Functions

	Power On	When the TV is turned off, place your finger on the joystick button,
		press it once, and release it.
	Power Off	When the TV is turned on, place your finger on the joystick button,
		press it once for a few seconds, and release it.
		All running apps will close and any recording in progress will stop.
	Volume	If you place your finger over the joystick button and move it left or right,
	Control	you can adjust the volume level.
	Channels	If you place your finger over the joystick button and move it up or down,
	Control	you can scroll through the saved channels.

NOTE

••With your finger over the joystick button move it up, down, left, or right. Be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved channels.

Adjusting the Menu

When the TV is turned on, press the joystick button one time.

You can adjust the menu items moving the joystick button up, down, left, or right.

POWER OFF Turns the power off.

SETTINGS Accesses the Quick Settings.

CLOSE Clears on-screen displays and returns to TV viewing.

INPUTS Changes the input source.

ASSEMBLING AND PREPARING 13

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

••Avoid touching the screen at all times, as this may result in damage to the screen.

••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

••It is recommended to move the TV in the box or packing material that the TV originally came in.

••Before moving or lifting the TV, disconnect the power cord and all cables.

••When holding the TV, the screen should face away from you to avoid damage.

••Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

••Use at least two people to move a large TV.

••When transporting the TV by hand, hold the TV as shown in the following illustration.

••When handling the TV, be careful not to damage the protruding joystick button.

••When transporting the TV, do not expose the TV to jolts or excessive vibration.

••When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

••Do not apply excessive pressure to cause flexing or bending of frame chassis or the screen as it may damage the screen.

••Be sure to keep your TV upright instead of laying it down or tilting it while moving the TV.

Setting Up The TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

••Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

NOTE

••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

(For 55EG9200, 55EG9600)

1

Packing

Brace

Stand Cover

CAUTION

••When assembling the stand, lay the packing	5 EA
brace on a table or product box and then place
the TV with its screen facing down on the	M4 x L20
packing brace. Be sure to protect the screen
from scratches. When there is no packing brace
provided, make sure that you place the screen
on soft clothing or a cushion.	4
••Do not place the TV without the stand attached

into its upright position. The protruding Joystick Button may be damaged.

2

Stand Cover

Stand Base

Cover Holder

1 Insert the protruding parts of the stand cover into the holes.

2 Insert the cover holder of the stand cover into the holes until it clicks.

3 Press the stand cover gently so that the nonwoven fabric inside is attached tightly.

ASSEMBLING AND PREPARING 15

(For 65EG9600)	3
1

Packing

Brace

Stand Cover

CAUTION

••When assembling the stand, lay the packing brace on a table or product box and then place the TV with its screen facing down on the packing brace. Be sure to protect the screen from scratches. When there is no packing brace provided, make sure that you place the screen on soft clothing or a cushion.

••Do not place the TV without the stand attached into its upright position. The protruding Joystick Button may be damaged.

2

Stand Base

8 EA

M4 x L20

4

Stand Cover

Cover Holder

1Insert the protruding parts of the stand cover into the holes.

2Insert the cover holder of the stand cover into the holes until it clicks.

3Press the stand cover gently so that the nonwoven fabric inside is attached tightly.

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

Mounting on a Table

(Image shown may differ from your TV.)

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (minimum) space from the wall for proper ventilation.

		10 cm
	10 cm	10	cm
		10 cm

<![if ! IE]>

<![endif]>ENGLISH

2 Connect the power cord to a wall outlet.

CAUTION

••Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a wall (optional)

(Depending upon model)

1Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.

Make sure to keep the rope parallel to the flat surface.

CAUTION

••Make sure that children do not climb on or hang on the TV.

NOTE

••Use a platform or cabinet that is strong and large enough to support the TV securely.

••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Tidying Cables

Gather and bind the cables with the cable holder.

Cable Holder

CAUTION

••Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount.

10 cm

10 cm 10 cm

10 cm

Make sure to use screws and wall mounts that meet the standard. Standard dimensions for the wall mount kits are described in the following table.

	Model	55EG9200
		55EG9600
	A x B x C	200 x 340 x 195
	Standard screw	M6
	Number of screws	4
	Wall mount	OTW150
	bracket (optional)

ASSEMBLING AND PREPARING 17

Model	65EG9600
A x B x C	200 x 330 x 120
Standard screw	M6
Number of screws	4
Wall mount	OTW150
bracket (optional)

A

B C

Wall mount bracket (optional)

OTW150

•	CAUTION		<![if ! IE]> <![endif]>ENGLISH
	•Disconnect the power before moving or
	installing the TV. Otherwise electric shock may
	occur.
••If you install the TV on a ceiling or slanted wall,
	it may fall and result in severe injury. Use an
	authorized LG wall mount and contact the local
	dealer or qualified personnel.
••Do not overtighten the screws as this may cause
	damage to the TV and void your warranty.
••Use the screws and wall mounts that meet the
	standard. Any damages or injuries by misuse or
	using an improper accessory are not covered by
	the warranty.

NOTE

••Use the screws that are listed in the standard screw specifications.

••The wall mount kit includes an installation manual and necessary parts.

••The wall mount bracket is optional. You can obtain additional accessories from your local dealer.

••The length of screws may differ depending upon the wall mount. Make sure to use the proper length.

••For more information, refer to the manual supplied with the wall mount.

18 MAKING CONNECTIONS

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

••The external device connections shown may differ slightly from illustrations in this manual.

••Connect external devices to the TV regardless about the order of the TV port.

••If you connect a gaming device to the TV, use the cable supplied with the gaming device.

••Refer to the external equipment’s manual for operating instructions.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional.

<![if ! IE]>

<![endif]>ENGLISH

VHF Antenna

UHF Antenna

Antenna

Coaxial (75Ω) (*Not provided)

Terminal

CAUTION

••Make sure not to bend the copper wire of the RF cable.

Copper wire

••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

OR					Wall Jack

Coaxial (75Ω) (*Not provided)

NOTE

••To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

••Use a signal splitter to use more than 2 TVs.

••If the antenna is not installed properly, contact your dealer for assistance.

••DTV Audio Supported Codec: MPEG, AAC, HE-AAC.

••Direct ULTRA HD broadcast is unavailable in areas without a ULTRA HD signal.

••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model)

MAKING CONNECTIONS 19

Connecting to an HD receiver, DVD Player, or VCR

Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.

NOTE

••HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting.

••Contact customer service for more information on the HDMI specifications of each input port.

••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s ULTRA HD Deep Color setting to Off.

- This feature is available on certain models which are supported ULTRA HD Deep Color only.

(Home) (Settings) (Advanced) Picture HDMI ULTRA HD Deep Color

-On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

-Off : Support 4K @ 50/60 Hz (4:2:0)

HDMI Connection

HDMI is the best way to connect a device.

Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

NOTE

••Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.

••High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

••HDMI Audio Supported Format: PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

(*Not Provided)

DVD / Blu-Ray / HD Cable Box / HD STB

ARC (Audio Return Channel)

••When connected with a high-speed HDMI cable, digital audio can be sent to a compatible device without an additional optical audio cable.

••ARC is only supported on the HDMI (4K @ 60 Hz) / DVI IN 2 (ARC) port. An external audio device that supports ARC should be connected to HDMI (4K @ 60 Hz) / DVI IN 2 (ARC) if you wish to use ARC.

<![if ! IE]>

<![endif]>ENGLISH

20 MAKING CONNECTIONS

DVI to HDMI Connection

Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.

NOTE

••When using the HDMI/DVI cable, only Single link is supported.

(*Not Provided)

<![if ! IE]>

<![endif]>ENGLISH

DVI OUT

(*Not Provided)

AUDIO OUT

DVD / Blu-Ray / HD Cable Box

MAKING CONNECTIONS 21

Component Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.

NOTE

••If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.

••Check to ensure the cables are matched with the corresponding color connection.

<![if ! IE]>

<![endif]>ENGLISH

	YELLOW				GREEN
(Use the composite video					(Use the component video
	cable provided.)				cable provided.)
	<![if ! IE]> <![endif]>YELLOW	<![if ! IE]> <![endif]>WHITE		<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>RED		<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>GREEN
		<![if ! IE]> <![endif]>WHITE		<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>RED		<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>GREEN
(*Not Provided)									(*Not Provided)
		<![if ! IE]> <![endif]>WHITE		<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>RED		<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>GREEN
		L		R
		AUDIO			VIDEO

DVD / Blu-Ray / HD Cable Box

22 MAKING CONNECTIONS

<![if ! IE]>

<![endif]>ENGLISH

Composite Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.

NOTE

••If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

••Check to ensure the cables are matched with the corresponding color connection.

YELLOW

(Use the composite video cable provided.)

<![if ! IE]> <![endif]>YELLOW		<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED
<![if ! IE]> <![endif]>YELLOW		<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED
				(*Not Provided)
<![if ! IE]> <![endif]>YELLOW		<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED
VIDEO	L (MONO) AUDIO R

VCR / DVD / Blu-Ray / HD Cable Box

MAKING CONNECTIONS 23

Connecting to a PC

NOTE

••Use an HDMI connection for the best image quality.

••Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.

••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

••The synchronization input form for Horizontal and Vertical frequencies is separate.

••Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

••If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the next page.

••When using the HDMI/DVI cable, only Single link is supported.

••If ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending upon your PC’s performance.

••HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting.

••Contact customer service for more information on the HDMI specifications of each input port.

••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s ULTRA HD Deep Color setting to Off.

- This feature is available on certain models which are supported ULTRA HD Deep Color only.

(Home) (Settings) (Advanced) Picture HDMI ULTRA HD Deep Color

-On Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

-Off Support 4K @ 50/60 Hz (4:2:0)

••With the HDMI cable, connect the HDMI (4K @ 50/60 Hz) / DVI IN 1 port of your TV to the HDMI output port of your PC. Then, the TV will output video and audio together.

<![if ! IE]>

<![endif]>ENGLISH

24 MAKING CONNECTIONS

HDMI Connection or DVI to HDMI Connection

Choose method A or B to make connection.

Method A: HDMI Connection

(*Not Provided)

PC

<![if ! IE]>

<![endif]>ENGLISH

Method B: DVI to HDMI Connection

(*Not Provided)

(*Not Provided)					AUDIO OUT	DVI OUT

PC

MAKING CONNECTIONS 25

Connecting to an Audio System

You may use an optional external audio system instead of the built-in speakers.

Digital Optical Audio Connection

Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.

NOTE

••Do not look into the optical output port. Looking at the laser beam may damage your vision.

••Audio with ACP (Audio Copy Protection) function may block digital audio output.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>Provided) (*Not

OPTICAL AUDIO IN

Digital Audio System

26 MAKING CONNECTIONS

Connecting Headphones

(For EG9600 series)

Listening to sound with headphones.

NOTE

••Do not use headsets (earphones) at high volume or for a long time. It may cause damage to your hearing.

••AUDIO menu options are disabled when headphones are connected.

••When changing AV MODE with a headphone connected, the change is applied to video but not to audio.

••Optical Digital Audio Out is not available when connecting a headphone.

••Headphone impedance: 16 Ω

••Max audio output: 0.627 mW to 1.334 mW

••Headphone jack size: 3.5 mm

<![if ! IE]>

<![endif]>ENGLISH

Headphone

(*Not Provided)

MAKING CONNECTIONS 27

Connecting a USB Drive

Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files.

NOTE

••Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it directly to the USB port on the TV.

••Some USB devices may not work if they do not meet USB 3.0 standard. In case, connect it to USB IN 2 or USB IN 3 port.

Choose any USB input port to connect.

It does not matter which port you use.

(*Not Provided)

USB / USB HUB / HDD

<![if ! IE]>

<![endif]>ENGLISH