LG Electronics 37LF66, 37LF65, 37LF75, 37LY95, 42LF65 User Manual

...

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

LCD TV PLASMA TV OWNER’S MANUAL

LCD TV MODELS

3377 LLFF66

3377 LLYY99

4422 LLFF66

4422 LLYY99

4477 LLFF66

4477 LLYY99

5522 LLFF66**5522 LLYY99

** 3377 LLFF77 ** 4422 LLFF77 **

PLASMA TV MODELS

5500 PPFF99

6600 PPFF99

Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)

IIDD NNuummbbeerr(( ss))::

4560: 37LY95 4536: 47LF65 4534: 42LY95 4604: 37LY96 4558: 47LY95 4606: 47LY96 4537: 42LF65 4608: 37LF66 4605: 42LY96 4610: 47LF66 4607: 52LY96 4612: 52LF66 4609: 42LF66 4614: 50PF96 4611: 52LF65 4724: 37LF75 4725: 42LF75 4911: 42LY99 4615: 60PF96 4965: 50PF95(50PF95-ZJ) 4551: 60PF95 4613: 50PF95 (50PF95-ZA) 4535: 37LF 65

Downloaded From TV-Manual.com Manuals

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.

Owner's Manual

Owner’s manual

Owner’s Manual

Batteries

D/A

INPUT

VOL

LIST

FAV

POWER

1 2 3

456

UPDATE INDEX

SIZE

UIDE

I/II

MUTE

Q.VIEW

EXIT

VCR

DVD

TEXT

PICTURE

SLEEP

RATIO

TIME

REVEAL

HOLD

SUBTITLE

TV/RADIO

SOUND

INFO i

Remote Control

Power Cord

2- TV Brackets

2- Wall Brackets

2-bolts

Twister Holder

Arrange the wires

with the twister

holder.

LLCCDD TTVV mmooddeellss

Polishing Cloth

Polish the screen with the cloth.

Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior.

Do not wipe roughly when removing stain. Please be cautious of that excessive power may cause scratch or discoloration.

INPUT

MODE

D/A

DVD

EXIT

VOL PR

GUIDE

RATIO

I/II

VCR

POWER

123

456

789

Q.VIEW

LIST

INDEX

HOLD

SUBTITLE

TEXT

INPUT

BRIGHT

MUTE

TV/RADIO

UPDATE

SIMPLINK

INFO i

FAV

TIM

4-bolts for stand assembly

Refer to p. 10

3377”” oonnll yy

1-screw for stand fixing

Refer to p. 10

3377LLFF 77**oonnll yy

Cable Management

5500PP FF 99

oonnllyy

2-Wall brackets

2-eye-bolts

Two rubber caps

Refer to p. 15

2- TV Brackets

2- Wall Brackets

Plasma

TTVV mmooddeellss

One desk-type stand fixture

protection cover

Refer to p. 15

3-bolts

Refer to p. 15

■

This feature is not available for all models.

■

This feature is not available for all models.

6600PP FF 99

oonnllyy

■

This feature is not available for all models.

2-bolts

Downloaded From TV-Manual.com Manuals

CONTENTS

ACCESSORIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PREPARATION

Front Panel Controls....................................................... 4

Back Panel Information .................................................. 7

Stand installation

............................................................. 10

ATTACHING THE TV TO A DESK................................10

Attaching the TV to a wall ............................................ 11

Back Cover for Wire Arrangement............................. 12

Desktop Pedestal Installation ...................................... 15

Wall Mount: Horizontal installation ........................... 15

Antenna Connection...................................................... 16

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Insertion of CI module

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Digital Audio Out Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

- Screen Setup for PC Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . 30

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions . . . . . . . . . . . . . . . 34

Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . .38

Programme Selection . . . . . . . . . . . . . . . . . . . . . . 39

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . 39

On Screen Menus Selection and Adjustment . . . . 40

Auto Programme Tuning (In Digital Mode) . . . . . 41

Manual Programme Tuning (In Digital Mode) . . . 42

Programme Edit (In Digital Mode) . . . . . . . . . . . . 43

5V antenna Power (In Digital Mode only) . . . . . . 45

Software Update (In Digital Mode only) . . . . . . . 46

Diagnostics (In Digital Mode only) . . . . . . . . . . . 47

CI Information (In Digital Mode only) . . . . . . . . . 48

Auto Programme Tuning (In Analogue Mode) . . . . 49

Manual Programme Tuning (In Analogue Mode)

. . . . 50

Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . 51

Assigning a Station Name (In Analogue Mode)

. . . . . 51

Programme Edit (In Analogue Mode)

. . . . . . . . . . . . 52

Calling the Programme Table . . . . . . . . . . . . . . . . 54

Input Source Selection . . . . . . . . . . . . . . . . . . . . . 55

SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

PICTURE CONTROL

EPG (Electronic programme guide) (In Digital Mode)

- Switch on/off EPG . . . . . . . . . . . . . . . . . . . . 58

- Select a programme . . . . . . . . . . . . . . . . . . . 58

Button function in NOW/NEXT guide mode

. . . . 59

Button function in 8 days guide mode

. . . . . . . . 59

Button function in date change mode

. . . . . . . . . 59

Button function in extended description box

. . . . 60

Button function in record/remind setting mode

. . 60

Button function in timer list mode

. . . . . . . . . . . 60

Picture Size (Aspect Ratio) Control . . . . . . . . . . . 61

Preset Picture Settings

- Picture Mode-Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Auto Colour Tone Control (Warm/Medium/Cool)

. . . 64

Manual Picture Adjustment

- Picture Mode-User option . . . . . . . . . . . . . . . 65

- Colour Tone - User option . . . . . . . . . . . . . . .66

XD - Picture Improvement Technology . . . . . . . . . . . . 67

XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

TruMotion Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . 69

Advanced - TruMotion . . . . . . . . . . . . . . . . . . . . . . 69

Advanced - Black(Darkness) Level . . . . . . . . . . . . . 70

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Image Sticking Minimization(ISM) Method . . . . . . . . . 72

Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . 73

Downloaded From TV-Manual.com Manuals

CONTENTS

SOUND & LANGUAGE CONTROL

Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . 74

Preset Sound Settings - Sound Mode . . . . . . . . . 75

Sound Setting Adjustment - User Mode . . . . . . . . . 76

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . 78

Selecting digital audio out . . . . . . . . . . . . . . . . . . 79

I/II

Stereo/Dual Reception (In Analogue Mode Only)

. . . .80

NICAM Reception (In Analogue Mode Only) . . . . . .

- Speaker Sound Output Selection . . . . . . . . . 81

On-Screen Menu Language/Country Selection

. . . . . 82

Language selection (In Digital Mode only) . . . . . . 83

TIME SETTING

Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Auto On/ Off Timer Setting . . . . . . . . . . . . . . . . . 85

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . 86

Time Zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . 87

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . 88

Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

TELETEXT

Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Special Teletext Functions . . . . . . . . . . . . . . . . . . . 91

DIGITAL TELETEXT

Teletext within Digital Service . . . . . . . . . . . . . . . 92

Teletext in Digital Service

. . . . . . . . . . . . . . . . . . 92

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Product Specifications . . . . . . . . . . . . . . . . . . . . . 96

Programming the Remote Control . . . . . . . . . . . . 98

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

External Control Device Setup . . . . . . . . . . . . . . 104

Downloaded From TV-Manual.com Manuals

PREPARATION

FRONT PANEL CONTROLS

Plasma TV Models: 50PF9*, 60PF9

This is a simplified representation of the front panel. Here shown may be somewhat different from your TV.

If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.

SWIVEL STAND

(Only

PLASMA TV MODELS

)

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

NOTE

Before adjusting the angle, you must remove the cable management and loosen (to the left) the shaft bolt on the middle of stand’s back. And when stand be level with TV, you must close (to the right) the shaft bolt to set the hole.

Remote Control Sensor

PROGRAMME Buttons

VOLUME Buttons

MENU Button

OK Button

INPUT Button

POWER Button

Power/Standby Indicator

• illuminates red in standby mode.

INPUT MENU OK VOL PR

Downloaded From TV-Manual.com Manuals

PREPARATION

LCD TV Models: 37LF6*, 42LF6*, 47LF6*, 52LF6

Remote Control Sensor

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set is switched on.

PROGRAMME Buttons

VOLUME Buttons

OK Button

MENU Button

INPUT Button

POWER Button

IInntteelllliiggeenntt EEyyee

Adjusts picture according to

the surrounding conditions.

VOL

INPUT

Downloaded From TV-Manual.com Manuals

VOL

INPUT

VOL

PREPARATION

LCD TV Models: 37LY9*, 42LY9*, 47LY9*, 52LY9

IInntteelllliiggeenntt EEyyee

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set is switched on.

PROGRAMME Buttons

VOLUME Buttons

OK Button

MENU Button

INPUT Button

POWER Button

Remote Control Sensor

LCD TV Models: 37/

42LF7

VOL

PROGRAM Buttons

VOLUME Buttons

OK Button

MENU Button

INPUT Button

POWER Button

Remote Control Sensor

IInntteelllliiggeenntt EEyyee

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the set is switched on.

VOL

INPUT

Downloaded From TV-Manual.com Manuals

PREPARATION

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

HDMI Input

Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RGB/DVI Audio Input

Connect the monitor output from a PC to the appropriate input port.

Antenna Input

Connect over-the-air signals to this jack.

DIGITAL AUDIO OUT OPTICAL

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Component Input

Connect a component video/audio device to these jacks.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

BACK PANEL INFORMATION

This is a simplified representation of the back panel. Here shown may be somewhat different from your TV.

Plasma TV Models

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

AV IN 3V IN 3

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

V 1

V 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

1 32

84 5 6 7

PCMCIA

CARD SLOT

EJECT

ANTENNA IN

HDMI/DVI IN

DIGITAL AUDIO

OUT

OPTICAL

RS-232C IN

(CONTROL & SERVICE)

HDMI IN

RGB IN

RGB (PC)

VIDEO

COMPONENT IN

(RGB/DVI)

AUDIO

AV 1

AV 2

Downloaded From TV-Manual.com Manuals

PREPARATION

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

HDMI Input

Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RGB/DVI Audio Input

Connect the monitor output from a PC to the appropriate input port.

Antenna Input

Connect over-the-air signals to this jack.

DIGITAL AUDIO OUT OPTICAL

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Component Input

Connect a component video/audio device to these jacks.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

LCD TV Models

(Except 37/42LF7*)

AV 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

ANTENNA

EJECT

HDMI/DVI IN 1

HDMI IN 2

PCMCIA

CARD SLOT

1 2 3

S-Video Input

Connect S-Video out from an SVIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

84 5 6 7

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

ANTENNA

EJECT

HDMI/DVI IN 1

HDMI IN 2

HDMI IN 3

PCMCIA

CARD SLOT

1 2 5

84 6 7 3

PCMCIA

CARD SLOT

EJECT

HDMI/DVI IN 1

ANTENNA IN

(CONTROL & SERVICE)

PCMCIA

EJECT

HDMI/DVI IN 1

ANTENNA IN

OPTICAL

RS-232C IN

(CONTROL & SERVICE)

HDMI IN 2

DIGITAL AUDIO OUT

HDMI IN 2

RS-232C IN

RGB

COMPONENT IN

VIDEO

HDMI IN 3

RGB

VIDEO

COMPONENT IN

RGB IN

(PC)

RGB IN

AUDIO IN

(RGB/DVI)

AUDIO

OPTICAL

AUDIO IN (RGB/DVI)

AUDIO

AV 1 AV 2

DIGITAL AUDIO OUT

Downloaded From TV-Manual.com Manuals

LCD TV Models : 37/

42LF7

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

V 1

V 2

EJECT

HDMI/DVI IN 1

HDMI IN 2

HDMI IN 3

PCMCIA

CARD SLOT

RS-232C IN

1 2 3

S-Video Input

Connect S-Video out from an SVIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

84 5 6 7

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

HDMI Input

Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

DIGITAL AUDIO OUT OPTICAL

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Antenna Input

Connect over-the-air signals to this jack.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Component Input

Connect a component video/audio device to these jacks.

RGB/DVI Audio Input

Connect the monitor output from a PC to the appropriate input port.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

PREPARATION

PCMCIA

CARD SLOT

Downloaded From TV-Manual.com Manuals

EJECT

HDMI/DVI IN 1

ANTENNA IN

HDMI IN 2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

COMPONENT IN

HDMI IN 3

RGB

(PC)

RGB IN

OPTICAL

AUDIO IN

(RGB/DVI)

AUDIO

DIGITAL AUDIO OUT

AV 1

AV 2

PREPARATION

STAND INSTALLATION (Only 37 inch LCD TV Models)

Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.

Assemble the product stand with the product as shown.

Install the 4 bolts securely, in the back of the product in the holes provided.

ATTACHING THE TV TO A DESK (Only 37LF7

)

WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

1-screw

Stand

Desk

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

Downloaded From TV-Manual.com Manuals

ATTACHING THE TV TO A WALL

■

This feature is not available for all models.

Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.

The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don’t climb on or hang from the product.

NOTE

When moving the product to another place undo the ropes first.

Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.

To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

PREPARATION

Downloaded From TV-Manual.com Manuals

PREPARATION

Plasma TV models

Hold the CABLE MANAGEMENT with both hands and pull it as shown.

Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section.

Reinstall the CABLE MANAGEMENT as shown.

CABLE MANAGEMENT

BACK COVER FOR WIRE ARRANGEMENT

PREPARATION

Downloaded From TV-Manual.com Manuals

PREPARATION

LCD TV models

(Except 37/42LF7*)

Connect the cables as necessary.

To connect an additional equipment, see the EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss

section.

Install the

CC AABB LL EE MMAANN AAGGEE MMEENNTT

as shown.

Bundle the cables using the supplied twister holder.

(

This feature is not available for all models.

)

Hold the

CC AABBLLEE MM AANN AAGG EEMMEE NNTT

with both

hands and pull it upward.

NOTE

Do not hold the CABLE MANAGEMENT when moving the product.

- If the product is dropped, you may be injured or the product may be broken.

How to remove the cable management

CABLE MANAGEMENT

Downloaded From TV-Manual.com Manuals

PREPARATION

LCD TV model

(Only 37/42LF7*)

Connect the cables as necessary.

To connect an additional equipment, see the EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss

section.

Install the

CC AABB LL EE MMAANN AAGGEE MMEENNTT

as shown.

(Insert it as pushing the loops on the both sides of the cable management.)

Bundle the cables using the supplied twist holder.

(

This feature is not available for all models.

)

Hold the

CC AABBLLEE MM AANN AAGG EEMMEE NNTT

with both

hands and pull it out. (Pull it out as holding the loops on the both sides of

the cable management.)

NOTE

Do not hold the CABLE MANAGEMENT when moving the product.

- If the product is dropped, you may be injured or the product may be broken.

How to remove the cable management

CABLE MANAGEMENT

PREPARATION

Downloaded From TV-Manual.com Manuals

WALL MOUNT: HORIZONTAL INSTALLATION

For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

4 inches

4 inches 4 inches

4 inches

If you want to install the desk-type stand fixture protection cover (Plasma

TTVV mmooddeellss

only)

To prevent the foreign materials from entering the desk-type stand fixture, fix the desk-type stand fixture protection cover by using the supplied bolts as shown at the figure.

Bolts

Desk-type stand fixture protection cover

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4" on each side and from the wall.

When not using the desk-type stand (60PF9* only )

When not using the desk-type stand, install the supplied rubber caps for protecting the desk-type stand fixture as shown at the figure.

4 inches

Rubber cap

GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit

Breaker

■

The set can be installed in various ways such as on a wall, or on a desktop etc.

■

The set is designed to be mounted horizontally.

PREPARATION

Downloaded From TV-Manual.com Manuals

PREPARATION

AV 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

AV 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Outdoor Antenna (VHF, UHF)

Wall Antenna Socket

RF Coaxial Wire (75 ohm)

ANTENNA CONNECTION

Antenna

UHF

Signal Amplifier

VHF

■

In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

- Be careful not to bend the bronze wire when connecting to an antenna port.

- 5V antenna power works In Digital mode only. (Refer to p. 45)

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

PREPARATION

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

■

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.

AUDIO IN

(RGB/DVI)

RGB

(PC)

RGB IN

COMPONENT IN

AUDIOAUDIO

VIDEOVIDEO

AAV 1 AV 2

DIGITAL AUDIO OUT

AUDIO

VIDEO

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

When connecting with a component cable

Connect the video outputs (Y, PB, P

)

of the digital set

top box to the

CC OOMM PPOONNEENN TT IINN VVIIDDEE OO

jacks on the

set.

Connect the audio output of the digital set-top box to the

CC OOMM PPOONNEENN TT IINN AAUU DDIIOO

jacks on the set.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

COMPONENT input source with using the

II NNPPUU TT

button on the remote control.

Signal

480i/576i

480p/576p

720p/1080i

10 8 0 p

Component

Yes

(60Hz only)

HDMI1/2

Yes

(24Hz/50Hz/60Hz)

HDMI3

(Only 37/42LF7*, 42LY99)

Yes

(24Hz/50Hz/60Hz)

1 2

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models.

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

AUD (RG

RGB

(PC)

RGB IN

COMPONENT I

AUDIAUDIO

VIDEO

AV 1 AV 2

ANTENNAANTENNA IN IN

HDMI/DVI IN 1HDMI/DVI IN 1 HDMI IN 2HDMI IN 2

EJECT EJECT PCMCIA

RS-232C INRS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OUT

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

RS-232C IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

RS-232C IN

When connecting with a HDMI cable

Connect the digital set-top box to

HHDDMM II//DDVVII IINN 11

HHDDMM II II NN 22

jack on the set.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1 or HDMI2 input source with using the

II NNPPUUTT

button on the remote control.

Except

37/42LF7*, 42LY99

RGB IN

COMPONENT IN

ANTENNA INANTENNA IN

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3

RS-232C INRS-232C IN

(CONTR(CONTROL & SEROL & SERVICE)VICE)

AUD

(RGB

RGB

(PC)

AUDIUDIO

VIDEO

AV 1 AV 2

EJECT EJECT PCMCIA

OPTIC

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3

RS-232C IN

(CONTROL & SERVICE)

VIDEO

EJECT PCMCIA

CARD SLOT

Connect the digital set-top box to

HHDDMM II//DDVVII IINN 11

HHDDMM II II NN 22

HHDDMM II II NN 33

jack on the set.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1, HDMI2 or HDMI3 input source with

using the

II NNPPUUTT

button on the remote control.

Only

37/42LF7*, 42LY99

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

AUDIO IN

(RGB/DVI)

RGB

(PC)

RGB IN

COMPONENT IN

AUDIO

VIDEO

AAV 1 AV 2

HDMI/DVI IN 1HDMI/DVI IN 1 HDMI IN 2HDMI IN 2

RS-232C INRS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OUT

Connect the digital set-top box to

HHDDMM II//DDVVII IINN 11

jack on the set.

Connect the audio output of the digital set-top box to the

AAUUDDIIOO IINN ((RRGGBB// DDVV II))

jack on the set.

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1 input source with using the

II NNPPUUTT

button on the remote control.

When connecting with a HDMI to DVI cable

Except

37/42LF7*, 42LY99

RGB IN

COMPONENT IN

ANTENNA INANTENNA IN

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3

RS-232C INRS-232C IN

(CONTR(CONTROL & SEROL & SERVICE)VICE)

AUDIO IN

(RGB/DVI)

RGB

(PC)

AUDIO

VIDEO

AVV 1 AV 2

OPTICAL

DIGITAL AUDIO OUT

Connect the digital set-top box to

HHDDMM II//DDVVII IINN 11

jack on the set.

Connect the audio output of the digital set-top box to the

AAUUDDIIOO IINN ((RRGGBB// DDVV II))

jack on the set.

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1 input source with using the

II NNPPUUTT

button on the remote control.

Only

37/42LF7*, 42LY99

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

DVD SETUP

When connecting with a component cable

AUDIO IN

(RGB/DVI)

RGB

(PC)

RGB IN

COMPONENT IN

AUDIOAUDIO

VIDEOVIDEO

AAV 1 AV 2

DIGITAL AUDIO OUT

L/MONO

AUDIO

VIDEO

S-VIDEO

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

B-Y

R-Y

Connect the video outputs (Y, P

B, PR

)

of the DVD to the

CC OOMM PPOONNEENN TT IINN VVIIDD EEOO

jacks on the set.

Connect the audio outputs of the DVD to the CC OOMM PPOONNEENN TT IINN AAUU DDIIOO

jacks on the set.

Turn on the DVD player, insert a DVD.

Select

COMPONENT input source with using the

II NNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

1 2

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

When connecting with a Euro Scart

Connect the Euro scart socket of the DVD to the

AAVV11

Euro scart socket on the set.

Turn on the DVD player, insert a DVD.

Select

AV 1 input source with using the

II NNPPUUTT

button

on the remote control. If connected to

AV 2 Euro scart socket, select AV2

input source.

Refer to the DVD player's manual for operating instructions.

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

RS-232C IN

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO IN

(RGB/DVI)

AUDIOAUDIO

AV 1V 1 AV 2V 2

(R) AUDIO (L)

AUDIO/ VIDEO

NOTE

If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.

When connecting with an S-Video cable

L R

S-VIDEOVIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN 3V IN 3

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

Connect the S-VIDEO output of the DVD to the

SS--

VVIIDDEEOO

input on the set.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the set.

Turn on the DVD player, insert a DVD.

Select

AV 3 input source with using the

II NNPPUUTT

button

on the remote control.

Refer to the DVD player's manual for operating instructions.

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

AUD

(RGB

RGB

(PC)

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

ANTENNAANTENNA IN IN

HDMI/DVI IN 1HDMI/DVI IN 1 HDMI IN 2HDMI IN 2

EJECT PCMCIA

RS-232C INRS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OUT

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

When connecting HDMI cable

Connect the HDMI output of the DVD to the

HHDDMMII//DDVVII

IINN 11

HHDDMMII IINN 22

jack on the set.

Select

HDMI1or HDMI2 input source with using the

II NNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

Insert the CI Module to

PPCC MMCC II AA

(Personal Computer

Memory Card International Association)

CC AARRDD SS LL OOTT

of TV as shown.

For further information, see p.48.

TV can receive the video and audio signal simultaneously with using a HDMI cable.

If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.

NOTE

INSERTION OF CI MODULE

(This feature is not available in all countries.)

AUDIO

VIDEO

AV 1 AV 2

ANTENNAANTENNA IN IN

HDMI IN 1HDMI IN 1 HDMI IN 2

EJECT EJECT PCMCIAPCMCIA

CARD SLOT CARD SLOT

RS-232RS-232C IN

(CONTROL &

OPTICA

TVTVTV

-- TToo vvii eeww tthh ee ssccrraammbbll eedd ((ppaayy)) sseerrvvii cceess iinn ddii ggiittaall TTVV mmooddee..

Except

37/42LF7*, 42LY99

Only

37/42LF7*, 42LY99

RGB IN

COMPONENT IN

ANTENNA INANTENNA IN

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3

RS-232C INRS-232C IN

(CONTR(CONTROL & SEROL & SERVICE)VICE)

AUDIO (RGB/D

RGB

(PC)

AUDIO

VIDEO

AV 1 AV 2

OPTICA

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3

RS-232C IN

(CONTROL & SERVICE)

AUDIO

VIDEO

EJECT PCMCIA

CARD SLOT

Connect the HDMI output of the DVD to the HHDDMM II//DDVVII II NN 11,HHDDMM II II NN 22

HHDDMM II II NN 33

jack

on the set.

Select

HDMI1, HDMI2 or HDMI3 input source with

using the

II NNPPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

When connecting with an antenna

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■

Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.

AUDIOAUDIO

VIDEOVIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

RS-232C INRS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OU

OUTPUT SWITCH

ANT IN

S-VIDEO VIDEO

ANT OUT

Wall Jack

Antenna

Connect the

AANN TT OOUUTT

socket of the VCR to the

AANN TTEENN NNAA IINN

socket on the set.

Connect the antenna cable to the

AANN TT II NN

socket of the VCR.

Press the

PPLLAA YY

button on the VCR and match the appropriate programme between the TV and VCR for

viewing.

VCR SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

When connecting with a Euro Scart

Connect the Euro scart socket of the VCR to the

AAVV11

Euro scart socket on the set.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

Select

AV 1 input source with using the

II NNPPUUTT

button

on the remote control.

If connected to

AAVV22

Euro scart socket, select

AV 2

input source.

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

CARD SLOT

RS-232C IN

AUDIO IN

(RGB/DVI)

(PC)

RGB IN

AUDIOAUDIO

AV 1V 1 AV 2V 2

(R) AUDIO (L)

AUDIO/ VIDEO

L/MONO

AUDIO

VIDEO

S-VIDEO

L/MONO

AUDIO

VIDEO

S-VIDEO

NOTE

If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.

When connecting with a RCA cable

S-VIDEO

VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3V IN 3

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

Connect the

AAUUDD II OO/VVII DDEEOO

jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

Select

AV 3 input source using the

II NNPPUUTT

button on

the remote control.

If you have a mono VCR, connect the audio cable from the VCR to the

AAUUDDIIOO LL//MMOONNOO

jack of the set.

NOTE

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

NOTE

S-VIDEO

VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

AV IN 3V IN 3

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to the

SS--

VV II DD EEOO

input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the set.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

Select

AV 3 input source with using the

IINNPPUUTT

button on

the remote control.

1 2

DIGITAL AUDIO OUT SETUP

Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical)port.

Do not look into the optical output port. Looking at the laser beam may damage your vision.

CAUTION

RGB

(PC

COMP

AUDIO

VIDEOVIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1HDMI/DVI IN 1 HDMI IN 2HDMI IN 2

EJECT PCMCIA

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OUT

Connect one end of an optical cable to the TV Digital Audio (Optical)Output port.

Connect the other end of the optical cable to the digital audio (optical)input on the audio equipment.

Set the “TV Speaker option - Off ” in the AUDIO menu. (

pp..7788

). See the external audio equipment instruction

manual for operation.

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and external equipment. Match the jack colors

(

Video = yellow, Audio Left = white, and Audio Right = red

)

Select AV 3 input source with using the

II NNPPUUTT

button on the remote control.

Operate the corresponding external equipment. Refer to external equipment operating guide.

L R

VIDEO

AV IN 3V IN 3

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

Camcorder

Video Game Set

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

When connecting with a D-sub 15 pin cable

AUDIO IN (RGB/DVI)

RGB

(PC)

RGB IN

COMPONENT IN

AUDIOAUDIO

VIDEOVIDEO

AV 1V 1 AV 2V 2

INRS-232C IN

DIGITAL AUDIO OUT

RGB OUTPUT

AUDIO

Connect the RGB output of the PC to the

RR GGBB ((PPCC

))

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO IINN

((RRGGBB//DDVVII ))

jack on the set.

Turn on the PC and the set.

Select

RGB input source with using the

II NNPPUU TT

button

on the remote control.

When connecting with a HDMI to DVI cable

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.

If the PC does not support Auto DVI, you need to set the output resolution appropriately.

NOTE

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

HDMI/DVI IN 1 HDMI IN 2

EJECT PCMCIA

RS-232C IN

AUDIO IN

(RGB/DVI)

RGB

(PC)

RGB IN

COMPONENT IN

AUDIOAUDIO

VIDEOVIDEO

AV 1V 1 AV 2

IN IN

HDMI/DVI IN 1 HDMI IN 2

RS-232C INRS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL AUDIO OUT

DVI-PC OUTPUT

AUDIO

Connect the DVI output of the PC to the

HHDDMM II //DDVVII

II NN 11

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO IINN

((RRGGBB//DDVVII ))

jack on the set.

Turn on the PC and the set

Select

HDMI1 input source with using the

II NNPPUUTT

button on the remote control.

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

NOTE

To enjoy vivid picture and sound, connect a PC to the set.

Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly.

There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card.

The synchronization input waveform for Horizontal and Vertical frequencies are separate.

We recommend using 1920x1080 (Reduced Blanking Timing), 60Hz for the PC mode, they provide the best picture quality.

In Plasma TV models, we recommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality.

Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the set or the signal cable from the HDMI output port of the

PC to the HDMI IN (or HDMI/DVI IN) port on the set.

Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set).

If using a sound card, adjust PC sound as required.

This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set.

DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.

If required, adjust the settings for Plug and Play functionally.

If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC on the set.

If graphic card on the PC does output analog and digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.)

DOS mode may not work depending on video card if you use a HDMI to DVI cable.

When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality.

EXTERNAL EQUIPMENT SETUP

Downloaded From TV-Manual.com Manuals

+ 86 hidden pages