LG 50PM6700UB User Manual
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating your set and retain it
for future reference.
42PM4700
50PM4700
P/NO : MFL67468601 (1111-REV00)
50PM6700
60PM6700
50PM6900
60PM6900
50PM9700
60PM9700
www.lg.com
ENGLISH
ENG
IMPORTANT SAFETY INSTRUCTIONS
2
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
y
Clean only with a dry cloth.
y
Do not block any ventilation openings. Install
y
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
y
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
y
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).
IMPORTANT SAFETY INSTRUCTIONS
3
Protect the power cord from being walked on
y
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
y
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
y
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
y
storms or when unused for long periods of
time.
Refer all servicing to qualified service
y
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Never touch this apparatus or antenna during
y
a thunder or lightning storm.
When mounting a TV on the wall, make sure
y
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
y
to fall into the product, and do not drop
anything onto the screen.
CAUTION concerning the Power Cord
y
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.
Warning
y
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
- To reduce the risk of fire or
ENGLISH
ENG
IMPORTANT SAFETY INSTRUCTIONS
4
ENGLISH
ENG
Do not expose to dripping or splashing and
y
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Grounding
y
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
Power Supply
Short-circuit Breaker
DISCONNECTING DEVICE FROM THE MAIN
y
POWER
The power outlet must remain readily
accessed in the event the device needs to
be unplugged.
As long as this unit is connected to the AC
y
wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.
Do not attempt to modify this product in any
y
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.
ANTENNAS Outdoor antenna grounding
y
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
Cleaning
y
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
y
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
y
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odours coming
y
from the TV, unplug the power cord contact
an authorized service center.
Do not press strongly upon the panel with
y
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
Keep the product away from direct sunlight.
y
IMPORTANT SAFETY INSTRUCTIONS
5
Dot Defect
y
The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.
Generated Sound
y
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation
y
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
Viewing 3D Imaging (For 3D TV)
y
- The vision of young children may still be
developing. 3D contents should not be
viewed by children under the age of 5. All
other children’s viewing of 3D content should
be supervised by a responsible adult.
- Some viewers may experience symptoms of
discomfort such as nausea, eye strain, fatigue
and dizziness when viewing 3D content. All
viewers should take regular breaks to help
avoid these symptoms. If you experience any
symptoms of discomfort, discontinue viewing
and take a break until the symptoms go away.
If symptoms continue, consult a doctor.
- Following the guideline below may lessen the
likelihood of experiencing such discomfort:
· Viewing angle: watch 3D contents at the
eye level of the center of the TV screen.
· Viewing distance: watch 3D contents from
the minimum distance of 2 times the
diagonal size of the TV screen.
Preventing “Image burn” or “Burn-in” on your TV screen
If a fixed image displays on the TV screen for
y
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a
y
long period of time, image burn may occur on
the letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen
y
for a long period of time (2 or more hours for
LCD, 1 or more hours for the Plasma TV) to
prevent image burn.
For USA and Canada
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.
ENGLISH
ENG
TABLE OF CONTENTS
6
TABLE OF CONTENTS
ENGLISH
ENG
2 IMPORTANT SAFETY INSTRUCTIONS
6 TABLE OF CONTENTS
7 INSTALLATION PROCEDURE
7 ASSEMBLING AND PREPARING
7 Unpacking
12 Optional Extras
13 Parts and buttons
15 Lifting and moving the TV
16 Setting up the TV
16 - Attaching the stand
20 - Attaching the protection cover
20 - Tidying cables
21 - Mounting on a table
22 - Mounting on a wall
23 MAKING CONNECTIONS
23 Connecting to an antenna or cable
24 Connecting to a HD receiver, DVD, or VCR
player
24 - HDMI Connection
25 - DVI to HDMI Connection
26 - Component Connection
27 - Composite Connection
28 Connecting to a PC
28 - HDMI Connection, DVI to HDMI Connec-
tion or RGB Connection
30 Connecting to an Audio System
30 - Digital Optical Audio Connection
31 Connecting to a USB
32 REMOTE CONTROL
34 Magic Motion Remote Control Functions
35 - Registering Magic Motion Remote Control
35 - How to use Magic Motion Remote Con-
trol
35 - Precautions to Take when Using the
Magic Motion Remote Control
36 WATCHING TV
36 Turning the TV on for the first time
36 USING THE USER GUIDE
37 TROUBLESHOOTING
37 OPEN SOURCE SOFTWARE NOTICE
38 SPECIFICATIONS
41 MAINTENANCE
41 Cleaning Your TV
41 - Screen and frame
41 - Cabinet and stand
41 - Power cord
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may
y
differ slightly from that shown in this manual.
The available menus and options may differ
y
from the input source or product model that
you are using.
New features may be added to this TV in the
y
future.
ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
Open the package and make sure all the accessories are included.
1
Attach the stand to the TV set.
2
Connect an external device to the TV set.
3
Make sure the network connection is available.
4
You can use the TV functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
7
ENGLISH
ENG
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
In case of some model, the thin film on screen is a part of TV, So don’t take it off.
y
ASSEMBLING AND PREPARING
8
For PM4700, PM6700, PM9700 series
ENGLISH
ENG
Magic Motion Remote Control,
Batteries (AA)
(See p.34)
Screw for assembly
4 EA, M4 x 30
(See p.16)
Protection cover
(See p.20)
Owner’s manual Cable holder
(See p.20)
Screw for assembly
3 EA, M5 x 16
(See p.16)
Power Cord Ferrite core
Power Cord holder
(See p.20)
(Depending on model)
(See p.10)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing
cloth.
For 50PM6900
AV MODE
INPUT
ENERGY
TV
SAVING
123
456
7809
FLASHBK
LIST
MARK
FAV
P
A
G
3D
CHVOL
E
MUTE
INFO
Q.MENU
MENU
ENTER
EXIT
BACK
L/R SELECT
FREEZE
RATIO
ASSEMBLING AND PREPARING
9
Remote control,
Batteries (AAA)
(See p.32)
Screw for assembly
4 EA, M6 x 28
(See p.16)
Protection cover
(See p.20)
Owner’s manual,
CD manual (Included
Pentouch Software)
Screw for assembly
8 EA, M5 x 16
(See p.16)
Cable holder
(See p.20)
Cable holder
(See p.20)
Screw for assembly
2 EA, M4 x 30
(See p.16)
ENGLISH
ENG
Power Cord
Eye-bolt & Wall bracket
2 EA
(See p.19)
Home
Touch Pen
The number of touch pen may
differ depending on the model.
D-sub 15 pin signal cable Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing
cloth.
ASSEMBLING AND PREPARING
10
For 60PM6900
AV MODE
INPUT
ENERGY
TV
SAVING
123
456
7809
FLASHBK
LIST
MARK
FAV
P
A
G
3D
CHVOL
E
MUTE
INFO
Q.MENU
MENU
ENTER
EXIT
BACK
L/R SELECT
FREEZE
RATIO
ENGLISH
ENG
Remote control,
Batteries (AAA)
(See p.32)
Screw for assembly
2 EA, M6 x 28
(See p.16)
Screw for assembly
2 EA, M8 x 35
(See p.16)
Owner’s manual,
CD manual (Included
Pentouch Software)
Screw for assembly
8 EA, M5 x 16
(See p.16)
Cable holder
(See p.20)
Cable holder
(See p.20)
Screw for assembly
2 EA, M4 x 30
(See p.16)
Power Cord
Protection cover
(See p.20)
Home
Touch Pen
The number of touch pen may
differ depending on the model.
Eye-bolt & Wall bracket
2 EA
(See p.<?>)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing
cloth.
D-sub 15 pin signal cable
ASSEMBLING AND PREPARING
NOTE
y
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device] [to the TV]
10 mm (+/-5 mm)
[Cross Section of Ferrite Core]
[Figure 1]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and wall plug.
[to a wall plug] [to the TV]
11
[Figure 2]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the
LAN cable once on the ferrite core. Place the ferrite core close to the TV.
[to an External device] [to the TV]
10 mm (+/-5 mm)
[Figure 3]
- If there is one ferrite core, follow as shown in Figure 1.
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there are fore ferrite cores, follow as shown in Figures 1,2 and 3.
[Cross Section of Ferrite Core]
[Cross Section of Ferrite Core]
ENGLISH
ENG
ASSEMBLING AND PREPARING
12
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These device only works with compatible LG TV.
Home
ENGLISH
ENG
AN-TP300
Touch Pen
The number of touch pen may
differ depending on the model.
Compatibility
AN-TP300
AG-S3**
Touch Pen
Cinema 3D Glasses
AG-S3**
Cinema 3D Glasses
The model name or design
may be changed depending
on the upgrade of product
functions, manufacturer’s
circumstances or policies.
PM4700 PM6700 PM6900 PM9700
f
ffff
Parts and buttons
For PM4700, PM6700 series
Screen
ASSEMBLING AND PREPARING
13
Remote control and
intelligent
For PM6900 series
Remote control and
intelligent
1
sensors
Power indicator
1
sensors
Power indicator
INPUT
Speakers
SETTINGS
Screen
Speakers
OK
Buttons
ENGLISH
ENG
SETTINGS
INPUT
OK
Buttons
Button Description
/I
INPUT Changes the input source.
SETTINGS Accesses the main menus, or saves your input and exits the menus.
ٜ
OK
- + Adjusts the volume level.
v
^
Turns the power on or off.
Selects the highlighted menu option or confirms an input.
Scrolls through the saved channels.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
Loading...