LG 50PG6300 User manual
PREPARATION
CHANNEL SETUP
Accessories- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Swivel Stand - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
Front Panel Controls - - - - - - - - - - - - - - - - - - - - - - - - 4
Back Panel Information- - - - - - - - - - - - - - - - - - - - - - - 5
Please set it up carefully so
CONTENTS
the product does not fall over. - - - - - - - - - - - - - - - - - - 6
Back Cover for Wire Arrangement - - - - - - - - - - - - - - - 7
Desktop Pedestal Installation - - - - - - - - - - - - - - - - - - 8
Wall Mount: Horizontal Installation- - - - - - - - - - - - - - - 9
Not Using the Desk-type Stand - - - - - - - - - - - - - - - - - 9
Antenna or Cable Connection - - - - - - - - - - - - - - - - - 10
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup - - - - - - - - - - - - - - - - - - - - - - - - 11
Digital Audio Out Setup (In Digital Mode Only) - - - - - 12
DVD Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
VCR Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Other A/V Source Setup - - - - - - - - - - - - - - - - - - - - - 17
Insertion of CI Module - - - - - - - - - - - - - - - - - - - - - - 17
PC Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
WATCHING TV/BASIC OPERATIONS
Remote Control key Functions - - - - - - - - - - - - - - - - 22
Turning on the TV - - - - - - - - - - - - - - - - - - - - - - - - - 23
Installation Wizard - - - - - - - - - - - - - - - - - - - - - - - - - 23
Switching Channel - - - - - - - - - - - - - - - - - - - - - - - - - 25
Volume Control - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
Displaying Information - - - - - - - - - - - - - - - - - - - - - - 26
Displaying Channel List - - - - - - - - - - - - - - - - - - - - - 28
I/II- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
Setting the Subtitle (In Digital Mode Only) - - - - - - - - 30
Selecting the Main Input Source - - - - - - - - - - - - - - - 30
Selecting the Menu Language- - - - - - - - - - - - - - - - - 31
On-Screen Menus Selection and Adjustment - - - - - - 31
Setting the Aspect Ratio - - - - - - - - - - - - - - - - - - - - 33
Displaying Teletext Information - - - - - - - - - - - - - - - - 34
EPG (Electronic Programme Guide)
Viewing the Electronic Programme Guide- - - - - - - - - 35
Finding a Programme- - - - - - - - - - - - - - - - - - - - - - - 37
Viewing the Reserved Programme- - - - - - - - - - - - - - 38
Setting Digital Channels - - - - - - - - - - - - - - - - - - - - - 39
Setting Analog Channels - - - - - - - - - - - - - - - - - - - - 45
PICTURE SETTINGS
Selecting a Picture Mode - - - - - - - - - - - - - - - - - - - - 48
Customizing the Picture Setting- - - - - - - - - - - - - - - - 48
Noise Reduction - - - - - - - - - - - - - - - - - - - - - - - - - - 49
Fleshtone - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 49
SOUND SETTINGS
Setting the Sound Effect - - - - - - - - - - - - - - - - - - - - - 50
Adjusting the Sound Balance - - - - - - - - - - - - - - - - - 50
Adjusting the Volume Automatically - - - - - - - - - - - - - 51
Setting the TruSurround XT- - - - - - - - - - - - - - - - - - - 51
FEATURE SETTINGS
Setting the Time Information - - - - - - - - - - - - - - - - - - 52
Adjusting OSD Transparency - - - - - - - - - - - - - - - - - 52
Image Sticking Minimization (ISM) Method - - - - - - - - 53
Power Saving Picture Mode - - - - - - - - - - - - - - - - - - 53
Setting the PC (In PC Mode Only) - - - - - - - - - - - - - - 54
Setting the Screen (In HDMI Mode Only) - - - - - - - - - 55
Default Setting- - - - - - - - - - - - - - - - - - - - - - - - - - - - 55
DTV SETUP
Parental Control- - - - - - - - - - - - - - - - - - - - - - - - - - - 56
Language Setting- - - - - - - - - - - - - - - - - - - - - - - - - - 58
Schedule- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 59
Miscellaneous Settings- - - - - - - - - - - - - - - - - - - - - - 60
Software Update - - - - - - - - - - - - - - - - - - - - - - - - - - 61
System - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 64
APPENDIX
Menu Map- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 65
Troubleshooting- - - - - - - - - - - - - - - - - - - - - - - - - - - 66
Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 67
Product Specications - - - - - - - - - - - - - - - - - - - - - - 67
GB-2
PREPARATION
Accessories
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer
where you purchased the TV.
Image shown may differ from your TV.
Remote Control Owner’s Manual Batteries Power Cord
(50PG63**only)
PREPERATION
Cable management clip Cable Holder
(42PG63**only)
Polishing cloth for use on the screen.
Lightly wipe any stains or ngerprints on the surface of the TV with the polishing cloth.
Do not use excessive force. This may
cause scratching or discolouration.Polishing Cloth
Protection cover
(Refer to p.9)
Swivel Stand
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing
position.
GB-3
PREPERATION
Front Panel Controls
■ Image shown may differ from your TV.
■ If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
Remote Control Sensor
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates green when the TV is
switched on.
INPUT MENU OK VOLUME PROGRAMME
GB-4
Back Panel Information
(SERVICE ONLY)
2
7 8 9
3 4 5 6
1
10
2
11
12
■ Image shown may differ from your TV.
PREPERATION
1. Power Cord Socket
This TV operates on an AC power. The voltage is indicated
on the Specifications page. Never attempt to operate the TV
on DC power.
2. HDMI IN 1/2/3
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI
cable. (HDMI1 only)
3. AUDIO IN (RGB/DVI)
Connect the audio from a PC or DVI.
4. OPTICAL DIGITAL AUDIO OUT (In Digital Mode
only)
Connect digital audio from various types of equipment.
Note: In standby mode, this port does not work.
5. COMPONENT IN
Connect a component video/audio device to these jacks.
6. Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device
to these jacks.
7. RGB IN (PC)
Connect the output from a PC.
8. RS-232C IN (SERVICE ONLY) PORT
Connect to the RS-232C port on a PC.
9. ANTENNA IN
Connect RF antenna to this jack.
10. PCMCIA (Personal Computer Memory Card International Association) CARD SLOT
11. S-VIDEO
Connect S-Video out from an S-VIDEO device.
12. AV (Audio/Video) IN 3
Connect audio/video output from an external device to these
jacks.
GB-5
Please set it up carefully so the product does not fall over.
■ You should purchase necessary components to fix the TV to the wall on the market.
■ Position the TV close to the wall to avoid the possibility of it falling when pushed.
■ The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb or hang from the TV.
PREPERATION
1
2
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.
➊
(If your TV has bolts in the eyebolts, loosen these bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
➋
3
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
➌
NOTE
When moving the TV undo the cords first.
►
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
►
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
►
GB-6
Back Cover for Wire Arrangement
Connect the cables as necessary.
➊
To connect additional equipment, see the External Equipment Setup section of the manual.
Install the CABLE MANAGEMENT CLIP as shown.
➋
50PG63**42PG63**
Fix the Cable Holder as
shown and bundle the cables.
PREPERATION
CABLE MANAGEMENT CLIPCABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
For the 42PG63** model, press the center of the CABLE MANAGEMENT CLIP and then lift it.
50PG63**42PG63**
NOTE
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
►
If the TV is dropped, you may be injured or the TV may be damaged.
Separate CABLE MANAGEMENT
from TV by pressing two latches.
GB-7
PREPERATION
■ The TV can be installed in various ways such as on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualied electrician install a separate
circuit breaker. Do not try to earth the TV by connecting it
to telephone wires, lightening rods or gas pipes.
Desktop Pedestal Installation
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
10 cm
Power Supply
Circuit breaker
10 cm 10 cm
10 cm
GB-8
Wall Mount: Horizontal Installation
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting
bracket of LG brand when mounting the TV to a wall.
10 cm
10 cm 10 cm
10 cm
Not Using the Desk-type Stand
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
10 cm
PREPERATION
GB-9
PREPERATION
Antenna or Cable Connection
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
Antenna (Analog TV or Digital TV)
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
Wall Antenna
Socket
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Outdoor Antenna
(VHF,UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Cable (Digital TV-C)
Cable TV
Wall Jack
Using both cable and antenna
Antenna
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm)
RF Coaxial Wire (75 ohm)
Diplexer
(Signal
Combinner)
GB-10
NOTE
If you connect both cable and antenna using diplexer to the TV, some channels with same frequency range may be
►
not tuned.
■ Inpoorsignalareas,toachievebetterpicturequalityitmaybenecessarytoinstallasignalamplifiertothe
antenna as shown above.
■ IfsignalneedstobesplitfortwoTVs,useanantennasignalsplitterforconnection.
EXTERNAL EQUIPMENT SETUP
1
2
(SERVICE ONLY)
(SERVICE ONLY)
1
1
1
2
2
■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■ Image shown may differ from your TV.
HD Receiver Setup
■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set top box to
➊
the COMPONENT IN VIDEO jacks on the TV.
Connect the audio outputs of the digital set-top box to the
➋
COMPONENT IN AUDIO jacks on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for
➌
the digital set-top box.)
Select Component input source using the INPUT button on the
➍
remote control.
NOTE
Depending on the manufacturer, the Y, PB, PR jacks may be
►
identified as Y/Pb/Pr, Y/B-Y/R-Y or Y/Cb/Cr.
Connecting with a HDMI cable
Connect the HDMI output of the digital set-top box to the HDMI/DVI
➊
IN1,HDMIIN2or HDMI IN 3 jack on the TV.
EXTERNAL EQUIPMENT SETUP
Turn on the digital set-top box. (Refer to the owner’s manual for the
➋
digital set-top box.)
Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button
➌
on the remote control.
GB-11
GB-12
EXTERNAL EQUIPMENT SETUP
Connecting with a HDMI to DVI cable
(SERVICE ONLY)
1
2
(SERVICE ONLY)
2
1
Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.
➊
Connect the audio output of the digital set-top box to the AUDIO IN
➋
(RGB/DVI) jack on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the
➌
digital set-top box.)
Select HDMI 1 input source using the INPUT button on the remote
➍
control.
Digital Audio Out Setup (In Digital Mode Only)
■ Sending the TV’s digital audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the OPTICAL DIGITAL
➊
AUDIO OUT jack on the TV.
Connect the other end of the optical cable to the digital audio (optical)
➋
input on the audio equipment.
Turn on the audio equipment. (Refer to the external audio equipment
➌
instruction manual for operation.)
NOTE:
This function is only available in Digital TV or Digital TV-C mode.
►
CAUTION
Do not look into the optical output port. Looking at the laser beam may
►
damage your vision.
DVD Setup
(SERVICE ONLY)
1
2
1
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the DVD to the
➊
COMPONENT IN VIDEO jacks on the TV.
Connect the audio outputs of the DVD to the COMPONENT IN
➋
AUDIO jacks on the TV.
Turn on the DVD player, insert a DVD. (Refer to the DVD
➌
player’s manual for operating instructions.)
Select Component input source using the INPUT button on the
➍
remote control.
NOTE
Depending on the manufacturer, the Y, PB, PR jacks may be
►
identified as Y/Pb/Pr, Y/B-Y/R-Y or Y/Cb/Cr.
Connecting with a Euro Scart cable
EXTERNAL EQUIPMENT SETUP
Connect the Euro scart socket of the DVD to the AV1 or AV2
➊
socket on the TV.
Turn on the DVD player, insert a DVD. (Refer to the DVD
➋
player’s manual for operating instructions.)
Select AV1 or AV2 input source using the INPUT button on the
➌
remote control.
NOTE
Any Euro scart cable used must be signal shielded.
►
GB-13
GB-14
EXTERNAL EQUIPMENT SETUP
Connecting with a S-Video cable
(SERVICE ONLY)
(SERVICE ONLY)
1
2
1
1
2
(SERVICE ONLY)
(SERVICE ONLY)
1
1
Connect the S-VIDEO output of the DVD to the S-VIDEO input
➊
jack on the TV.
Connect the audio outputs of the DVD to the AUDIO input jacks
➋
on the TV.
Turn on the DVD player, insert a DVD. (Refer to the DVD
➌
player’s manual for operating instructions.)
Select AV3(S-Video) input source using the INPUT button on
➍
the remote control.
Connecting with a HDMI cable
Connect the HDMI output of the DVD to the HDMI/DVIIN1,HDMIIN
➊
2 or HDMI IN 3 jack on the TV.
Turn on the DVD player, insert a DVD. (Refer to the DVD player’s
➋
manual for operating instructions.)
Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button
➌
on the remote control.
NOTE
The TV can receive video and audio signals simultaneously when
►
using a HDMI cable.
If the DVD does not support Auto HDMI, you must set the output
►
resolution appropriately. To get the best picture quality, adjust the
output resolution of the source device to 1280x720p.
VCR Setup
2
1
1
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■ If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
Connecting with a RF Cable
Wall Jack
Antenna
EXTERNAL EQUIPMENT SETUP
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
➊
Connect the antenna cable to the ANT IN socket of the VCR.
➋
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
➌
Connecting with a Euro Scart cable
Connect the Euro scart socket of the VCR to the AV1 or AV2
➊
socket on the TV.
Insert a video tape into the VCR and press PLAY on the VCR.
➋
(Refer to the VCR owner’s manual.)
Select AV1 or AV2 input source using the INPUT button on the
➌
remote control.
NOTE
Any Euro scart cable used must be signal shielded.
►
GB-15
GB-16
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
(SERVICE ONLY)
2
1
1
(SERVICE ONLY)
1
1
2
Connect the audio/video outputs of the VCR to the AUDIO/VIDEO
➊
jacks on the TV. Match the jack colours (Video = yellow, Audio
Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR.
➋
(Refer to the VCR owner’s manual.)
Select AV3(CVBS) input source using the INPUT button on the
➌
remote control.
NOTE
If you have a mono VCR, connect the audio cable from the VCR to
►
the AUDIO L/MONO jack of the TV.
Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the S-VIDEO
➊
input jack on the TV. The picture quality is improved;
compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO input
➋
jacks on the TV.
Insert a video tape into the VCR and press PLAY on the VCR.
➌
(Refer to the VCR owner’s manual.)
Select AV3(S-Video) input source using the INPUT button on
➍
the remote control.
Other A/V Source Setup
1
1
Camcorder Video Game Set
Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow,
➊
Audio Left = white, and Audio Right = red)
Select AV3(CVBS) input source using the INPUT button on the remote control.
➋
Operate the corresponding external equipment. (Refer to external equipment operating guide.)
➌
EXTERNAL EQUIPMENT SETUP
Insertion of CI Module
■ To view the encrypted (pay) services in digital TV mode.
Insert the CI Module to PCMCIA (Personal Computer Memory Card
➊
International Association) CARD SLOT of TV as shown.
GB-17
GB-18
EXTERNAL EQUIPMENT SETUP
PC Setup
AUDIO
RGB OUTPUT
12
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV’s settings.
Connecting with a D-sub 15 pin cable
Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.
➊
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
➋
Turn on the PC and the TV
➌
Select PC input source using the INPUT button on the remote control.
➍
Connecting with a HDMI to DVI cable
(SERVICE ONLY)
DVI-PC OUTPUT
AUDIO
AUDIO
RGB OUTPUT
12
1
2
Connect the DVI output of the PC to the HDMI/DVI IN 1 jack on the TV.
➊
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
➋
Turn on the PC and the TV.
➌
Select HDMI 1 input source using the INPUT button on the remote
➍
control.
NOTE :
To enjoy vivid picture and sound, connect a PC to the TV.
►
Avoid keeping a fixed image on the TV’s screen for prolonged periods of
►
time. The fixed image may become permanently imprinted on the screen;
use a screen saver when possible.
Connect the PC to the RGB IN (PC) or HDMI/DVI IN 1 port of the TV;
►
►
►
►
►
►
►
►
►
►
►
►
►
►
change the resolution.
There may be interference relating to resolution, vertical pattern, contrast
or brightness in PC mode. Change the PC mode to another resolution
or change the refresh rate to another rate or adjust the brightness and
contrast on the menu until the picture is clear. If the refresh rate of the PC
graphic card can not be changed, change the PC graphic card or consult
the manufacturer of the PC graphic card.
The synchronization input waveform for Horizontal and Vertical
frequencies are separated.
We recommend using 1024x768, 60Hz (42PG63**) / 1360x768, 60Hz
(50PG63**) for the PC mode, these should provide the best picture
quality.
Connect the signal cable from the monitor output port of the PC to the RGB IN(PC) port of the TV or the signal cable
from the HDMI output port of the PC to the HDMI/DVI IN 1 port on the TV.
Connect the audio cable from the PC to the AUDIO IN (RGB/DVI) on the TV. (Audio cables are not included with the
TV).
If using a sound card, adjust PC sound as required.
This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol.
The PC adjusts automatically when using this TV.
DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.
If required, adjust the settings for Plug and Play functionality.
If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either
RGB IN or HDMI/DVI IN 1 to display the PC output on the TV.
If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or
HDMI; (the other mode is set to Plug and Play automatically by the TV.)
DOS mode may not work depending on the video card if you use a HDMI to DVI cable.
If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of
cable. This provides the best picture quality.
EXTERNAL EQUIPMENT SETUP
GB-19
GB-20
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
PC mode
Resolution
720 x 400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.317
1024 x 768 48.363 60.00
1280x768 47.776 59.87
1360x768 47.712 60.015
1920x1080 66.647 59.988
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI 1(DTV+PC) mode
Resolution
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.317
1024x768 48.363 60
1280x768 47.776 59.87
1360x768 47.712 60.015
720 x 480
720 x 576 31.25 50
1280 x 720
1920 x 1080
Horizontal
Frequency(kHz)
31.47
31.50
37.50
44.96
45.00
33.72
33.75
28.125
27.00
56.25
66.647
67.433
67.500
Frequency(Hz)
Vertical
59.9
60
50.00
59.94
60.00
59.94
60.00
50.00
24.00
50.00
59.988
59.94
60.00
HDMI2,HDMI3(DTV)mode
Resolution
640x480
720 x 480
720 x 576 31.25 50
1280 x 720
1920 x 1080
Horizontal
Frequency(kHz)
31.469
31.469
31.47
31.50
37.50
44.96
45.00
33.72
33.75
28.125
27.00
56.25
67.433
67.500
Vertical
Frequency(Hz)
59.94
60
59.9
60
50.00
59.94
60.00
59.94
60.00
50.00
24.00
50.00
59.94
60.00
Component mode
Resolution
720 x 480
720 x 576
1280 x 720
1920 x 1080
Horizontal
Frequency(kHz)
15.73
15.75
31.47
31.50
15.6
31.25
37.50
44.96
45.00
33.72
33.75
28.125
Vertical
Frequency(Hz)
59.9
60
59.9
60
50
50
50.00
59.94
60.00
59.94
60.00
50.00
Scart Output
Main Input AV1(SCART1 Output) AV2(SCART2 Output)
Digital TV Digital TV Digital TV
Digital TV-C Digital TV-C Digital TV-C
Analog TV Analog TV Analog TV
AV1(SCART1)
AV2(SCART2) AV2(CVBS)
AV3(CVBS Side) AV3(CVBS)
AV3(S-VIDEO Side) AV3(S-VIDEO)
Component AV Mute
PC AV Mute
HDMI1 AV Mute
HDMI2 AV Mute
HDMI3(Side) AV Mute
AV1(CVBS)
EXTERNAL EQUIPMENT SETUP
Last RF
(Outputs the broadcast you watched
last among Analog TV, Digital TV or
Digital TV-C broadcast.)
GB-21
Loading...