LG 50PA4520, 42PA4500, 42PA4520 Owner’s Manual

	User’s’s Guidei Specificationifi ti
						JY Choi	HJ Shin	JO Kim
1. Model Description
						12.02.05	11.12.15	11.12.15
	MODEL	42/50PA4500/4520	BRAND	LG		Part No.	MFL67230031
	SUFFIX	MJ	Product Name	42/50PA4500/4520			(1202-REV01)

2. Printing Specification

1.Trim Size (Format) : 170 mm x 240 mm (Tolerance +/- 5 mm)

2.Printing Colors

•Cover : 1 COLOR (BLACK)

•Inside : 1 COLOR (BLACK)

3.Stock (Paper) Maplitho grade below tolerance for GSM is 5 g/m2

•Cover : Uncoated paper , 80 g/

•Inside : Uncoated paper , 80 g/

4.Printing Method : Off-set

5.Bindery : Saddle stitch

6.Language : English

7.Number of pages : 32

“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

NDetails should be followed Eco-SCM management standard[LG(56)-A-2524].

OEspecially, Part should be followed and controlled the following specification.

T(1)Eco-hazardous substances test report should be submitted

Ewhen Part certification test and First Mass Production.

S(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3.	Special Instructions
	(1) Origin Notification
	* LGEIN : Printed in Indonesia	* LGEWA : Printed in U.K.
	* LGESP : Printed in Brazil	* LGEMX : Printed in Mexico
	* LGEND : Printed in China	* LGEIL : Printed in India
	* LGEMA : Printed in Poland
4.	Changes

10
9
8
7
6
5
4
3
2
1	Feb/05/12 CHOI JIN YOUNG	EKPC200058	Added Isolator and changed PA49** contents
REVNO.	. MM/DD/YY SIGNATURE	CHANGE NO.	CHANGE CONTENTS

LG(EN)

Front cover

P/no

LG(FR)

Front cover

LG(POR)

Front cover

LG(ARA)

Back cover

Paginationi ti sheett

2	…		…	…

2	…		…	…

2	…		…	…

23	…		…	…

P/NO. MFL67230032

Total pages : 96 pages

LG(EN)

Back cover

…23

LG(FR)

Back cover

…23

LG(POR)

Back cover

…23

LG(ARA)

Front cover

…2

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating the set and retain it for future reference.

PA45**

PA49**

PA65**

MFL67230031

P/NO : MFL67230031 (1202-REV01)

www.lg.com

ISOLATOR GUIdE

1

127(

Isolator Usage (Safety Caution)

$QWHQQ ,VRO WRU ,QVW OO WLRQ *XLGH

1. Always use isolator with RF signal port (In wall RF port or in set RF Port).

2.Isolator will protect if there is any voltage difference between GND of power Board and GND of Antenna Signal, the Antenna contact might be heated and excessive heat might cause an accident, therefore Isolator installation is highly recommended.

3.Avoid disconnecting the antenna isolator after installation.

4.When applying RF isolator, a slight loss of signal sensitivity can occur.

5.You can improve safety of TV by efficiently removing power voltage from TV

antenna.

$QWHQQ ,VRO WRU ,QVW OO WLRQ 0HWKRG

,VRO WRU &RQQHFWLRQ 0HWKRG
: OO	&RQQHFW WR 79
ANTENNA/	RU
CABLE IN

& OH $QWHQQ

,VRO WRU

&RQQHFW WR 6HW 7RS R[ &RQQHFW RQH HQG RI WKH LVRO WRU WR F OH QWHQQ M FN QG WKH RWKHU WR 79 VHW RU VHW WRS R[

*Above Pictures may differ from the actual.

127(

"Equipment connected to the protective earthing of mains connection of the building, or through other protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some

circumstances. Connection to a cable distribution system has therefore to be provided through a device

providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)"

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

2 SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

yPlease read these safety precautions carefully before using the product.

yIn this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.

wARNING y If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION y If you ignore the caution message, you may be slightly injured or the product may be damaged.

PRECAUTION IN INSTALLING THE PROdUCT

wARNING

Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or

deformation may occur.

Do not use the product in damp place such as a bathroom or any place where it is likely

to get wet.

- This may cause a fire or could give an electric shock.

If you can smell smoke or other odours or hear a strange sound unplug the power cord and

contact the service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur.

CAUTION

Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken.

Keep the product away from direct sunlight. - The product can be damaged.

Do not place the product in a built-in installation such as bookcase or rack. - Ventilation required.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

PRECAUTIONS wHEN MOvING THE PROdUCT wARNING

Make sure to turn off the product. Make sure to remove all cables before moving the product.

- You may be electrocuted or the product can be damaged.

CAUTION

Do not impact the product when moving it. - You may be electrocuted or the product

can be damaged.

Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged

product can cause electric shock or fire. Contact your nearest service center for

repair.

PRECAUTIONS wHEN USING THE PROdUCT

wARNING

Do not disassemble, repair or modify the

product at your own discretion. - Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair.

ELECTRICAL POwER RELATEd PRECAUTIONS

wARNING

Make sure to connect the power cable to a

properly earthed outlet.

- You may be electrocuted or injured.

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered

with dust, dry the power plug completely or wipe

dust off.

- You may be electrocuted due to excess moisture.

Never touch this product or antenna during a

thunder or lighting storm.

- You may be electrocuted.

Do not insert a conductor (like a metal

chopstick) into one end of the power cable while

the other end is connected to the input terminal on the wall.

Additionally, do not touch the power cable right after plugging into the wall input terminal.

- You may be electrocuted.

CAUTION

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT INFORMATION TO PREvENT “IMAGE BURN / BURN-IN” ON YOUR TELEvISION SCREEN

-When a fixed image (e.g. logos, screen menus, video game, computer display or teletext pages) is displayed on the television for an extended period it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or “burn-in”. Image burn is not covered under the manufacturer’s warranty.

-In order to prevent image burn, avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

-Image burn can also occur on the letterboxed areas of

your television if you use the 4:3 aspect ratio setting for an extended period.

TABLE OF CONTENTS / AddITIONAL INFORMATION 3

TABLE OF CONTENTS

1	ISOLATOR GUIdE		16		wATCHING Tv
2	SAFETY INSTRUCTIONS	16			Connecting an antenna
		16			Turning the TV on for the first time
3	AddITIONAL INFORMATION		17		MAKING CONNECTIONS
		17			Connecting your Unit
4	INSTALLATION PROCEdURE
		18			ENTERTAINMENT
4	ASSEMBLING ANd PREPARING	18			- Connecting USB storage devices
		19			- Browsing files
4	Unpacking
		20			TROUBLESHOOTING
7	Separate purchase
7	Parts and buttons
9	Lifting and moving the TV		21		SPECIFICATIONS
10	Setting up the TV
10 - Attaching the stand		23
12	- Tidying cables				OPEN SOURCE SOFTwARE NOTICE
13 - Mounting on a table
14	- Mounting on a wall	24			ENvIRONMENTAL INFORMATION
15	REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

AddITIONAL INFORMATION

viewing the owner’s manual

The owner’s manual in PDF file format is supplied on the enclosed CD. Install the Adobe Acrobat Reader to view the owner’s manual on your PC.

1Insert the supplied CD. The web page appears automatically.

2Click Owner’s Manual on the web page.

3View the owner’s manual.

NOTE

If the web page does not appear automatically, access My computer and then click LG and index.htm to view the owner’s manual.

4 INSTALLATION PROCEdURE / ASSEMBLING ANd PREPARING

			NOTE
	<![if ! IE]> <![endif]>ENGLISH	y Image shown may differ from your TV.
		y	Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Your TV's feature may vary from country to counrty depending on channel broadcast system.

INSTALLATION PROCEdURE

1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

ASSEMBLING ANd PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

Only 42/50PA45**, 50/60PA65**

Remote control,						Owner’s manual,				Polishing cloth
Batteries (AAA)						Cd manual				(Depending on model)
( See p. 15)										Use this to remove dust
										from the cabinet.

Screw for assembly

Power Cord Holder

Power Cord

4 EA, M4 x 30

3 EA, M5 x 16

( See p. 12)

( See p. 10~11)

( See p. 10)

Protection Cover	Ferrite core	Cable Holder
( See p. 11)	(Depending on model)	( See p. 12)

Stand Body	Stand Base	Isolator
( See p. 10)	( See p. 10)	(Depending on model)
		( See p. 7)

ASSEMBLING AND PREPARING 5

Only 42/50PA49**

<![if ! IE]>

<![endif]>ENGLISH

Remote control, Batteries (AAA)

( See p. 15)

Screw for assembly

4 EA, M4 x 30					3 EA, M5 x 16
(Seep.10~11)					( See p. 10)

Protection Cover

( See p. 11)

Ferrite core

(Depending on model)

Cradle

Tip

The number of tip may differ depending on the model.

Stand Body

( See p. 10)

Owner’s manual, CD manual (Included Pentouch Software)

Polishing cloth

(Depending on model) Gently wipe the spots on the cabinet with the polishing cloth.

Cable Holder

( See p. 12)

D-sub 15 pin signal cable

Touch Pen Dongle

(AN-TD200)

Touch Pen (AN-TP300)

The number of touch pen may differ depending on the model.

Isolator

(Depending on model) ( See p. 7)

Pentouch Caution Guidelines

Power Cord

Power Cord Holder

( See p. 12)

Eye-bolt & Wall bracket

2 EA ( See p. 13)

Charging Cable

Stand Base

( See p. 10)

<![if ! IE]>

<![endif]>ENGLISH

6 ASSEMBLING ANd PREPARING

CAUTION

yDo not use any pirated items to ensure the safety and product life span.

yAny damages or injuries by using pirated items are not covered by the warranty.

NOTE

yThe items supplied with your product may vary depending on the model and Country.

yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yHow to use the ferrite core.

This feature is not available for all country.

1.Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device]	10 mm(+ / - 5 mm)
	[to the TV]
[Figure 1]	(Gray)
	[Cross Section of
	Ferrite Core]

2. Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to a wall plug]		[to the TV]
	[Figure 2]	(Black)
		[Cross Section of
		Ferrite Core]

3. Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L, R cable. Place the ferrite core close to the TV.

[to a wall plug] [to the TV] (Black)

[Cross Section of Ferrite Core]

10 mm(+ / - 5 mm)

[Figure 3]

*Above Pictures may differ from the actual.

4. Use the ferrite core to reduce the electromagnetic interference in the charging cable.

Wind the charging cable on the ferrite core once. Place the ferrite core close to an external device and the cradle or touch pen.

[to an External device]	[to the Cradle or Touch pen]
[Figure 4]	(Gray)
	[Cross Section of

-If there are three ferrite cores, follow as shown in Figures 1 and 2.

-If there are four ferrite cores, follow as shown in Figure 1, 2 and 3.

-If there is charging cable, additionally follow as shown in Figure 4.

yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

Ferrite Core]

*A 10 mm *B 18 mm

ASSEMBLING ANd PREPARING 7

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with compatible LG Plasma TV.

<![if ! IE]>

<![endif]>ENGLISH

AN-TP300

Touch Pen, Cradle

The number of touch pen and cradle may differ depending on the model.

Parts and buttons

NOTE

Compatibility	42/50PA45**	42/50PA49**	50/60PA65**
AN-TP300		•
Touch Pen, Cradle

yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

CAUTION

yDo not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall.

yDo not drag the TV. The floor or the product may be damaged.

ySome models have a thin film attached on to the screen and this must not be removed.