LG 49LF510T Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*
* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating
your TV and retain it for future reference.

32LF510B
32LF510D
43LF510T
43LF5100
49LF510T

49LF5100
43LF540T
43LF5400
49LF540T
49LF5400

*MFL68663722*

43LF541T
43LF5410
49LF541T
49LF5410

32LF550D
32LF565B
32LF565D
50LF5650

55LF565T
55LF5650
60LF565T
60LF5650

www.lg.com

P/NO : MFL68663722 (1509-REV05)

40LF570T
40LF5700
43LF570T

Important Safety Instructions

Always comply with the following precautions
to avoid dangerous situations and ensure peak
performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol within an equilateral triangle is
intended to alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.

The exclamation point within an

equilateral triangle is intended to alert the
user to the presence of important operating

ENGLISH

and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.

CAUTION

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

NOTE

The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet (Can differ by country).

• Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it.

2

• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

• Only use attachments/accessories specified by
the manufacturer.

• Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

• Unplug this apparatus during lightning storms
or when unused for long periods of time.

• CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner’s
manual to be certain. Do not connect too many
appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
service. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. Do
not move the TV with the power cord plugged
in. Do not use a damaged or loose power cord.
Be sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.

ENGLISH

• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

• Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.

• Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed.
If swallowed, induce vomiting and go to the
nearest hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.

• Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and
do not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.,
on shelves above the unit).

3

• Grounding

(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e., a TV
with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit by
connecting it to telephone wires, lightning rods,
or gas pipes.

Power
Supply

Circuit
Breaker

• As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.

• Do not attempt to modify this product in any
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this product.

• Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system

ENGLISH

should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can come in contact with
such power lines or circuits as death or serious
injury can occur. Be sure the antenna system is
grounded to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC)
in the U.S.A. provides information with respect
to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

• Cleaning

When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the
TV as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzene.

• Moving

Make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2
or more people to carry larger TVs. Do not press
or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation.
Do not install in a confined space such as a
bookcase. Do not cover the product with cloth or
other materials while plugged. Do not install in
excessively dusty places.

• If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.

• If water or another substance enters the
product (like an AC adapter, power cord, or TV),
disconnect the power cord and contact the
service center immediately. Otherwise, this may
result in fire or electric shock.

• Use only an authorized AC adapter and power
cord approved by LG Electronics.
Otherwise, this may result in fire, electric shock,
malfunction, or product deformation.

• Never disassemble the AC adapter or power
cord. This may result in fire or electric shock.

Ground Clamp

Electric Service

Ground Clamp

4

Equipment

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

• Handle the adapter carefully to avoid dropping
or striking it. An impact could damage the
adapter.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a
lightning storm.

• When mounting a TV on the wall, make sure not
to install the TV by hanging the power and signal
cables on the back of the TV.

• Do not allow an impact shock, any objects to fall
into the product, and do not drop anything onto
the screen.

• DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device.
In case of an emergency, the power plug must
remain readily accessible.

• Batteries
Store the accessories (battery, etc.) in a safe
location out of the reach of children.

• This apparatus uses batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact
your local authorities for disposal or recycling
information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the
batteries to overheat.

• Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper.)
This may result in product malfunction.

• Dot Defect
The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots on
the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.

• Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction due to
temperature and humidity. This noise is common
for products where thermal deformation is
required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a high­speed switching circuit, which supplies a large
amount of current to operate a product. It varies
depending upon the product. This generated
sound does not affect the performance and
reliability of the product.

• Take care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or
cause defects in the product.

• Do not install this product on a wall if it could be
exposed to oil or oil mist. This may damage the
product and cause it to fall.

• If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This is
normal; there is nothing wrong with TV. Some
minute dot defects may be visible on the screen,
appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the TV’s
performance. Avoid touching the LCD screen or
holding your finger(s) against it for long periods
of time. Doing so may produce some temporary
distortion effects on the screen.

Preventing Image Burn or Burn-in on
Your TV Screen

• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.

• Avoid displaying a fixed image on the TV screen
for a long period of time (2 or more hours for
LCD, 1 or more hours for the plasma TV) to
prevent image burn.

ENGLISH

5

Preparing

Maintenance

NOTE

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.

• The available menus and options may differ from
the input source or product model that you are
using.

• New features may be added to this TV in the
future.

• The items supplied with your product may vary
depending upon the model.

• Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.

• For an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm thick
and 18 mm width.

• Use an extension cable that supports USB 2.0 if
the USB cable or USB flash drive does not fit into
your TV’s USB port.

• Use a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a

ENGLISH

connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI®/™ cable

- High-Speed HDMI®/™ cable with Ethernet

B

A

*A 10 mm
*B 18 mm

B

CAUTION

• Do not use any unapproved items to ensure the
safety and lifespan of the product.

• Any damages or injuries by using unapproved
items are not covered by the warranty.

• Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.

• When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.

• Make sure that the screws are fastened tightly.
(If they are not fastened securely enough, the TV
may tilt forward after being installed.)

• Do not fasten the screws with excessive force;
otherwise, they may be worn out and become
loose.

Cleaning your TV

Clean your TV regularly to keep it at peak
performance and to extend the product’s lifespan.

CAUTION

• Before cleaning, turn the power off and
disconnect the power cord and all other cables.

• When the TV is left unattended or unused for a
long time, disconnect the power cord from the
wall outlet to prevent possible damage from
lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with
a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft
cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

CAUTION

• Do not push, rub, or hit the surface with your
fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.

• Do not use any chemicals, such as waxes,
benzene, alcohol, thinners, insecticides, air
fresheners, or lubricants, as these may damage
the screen’s finish and cause discoloration.

• Do not spray liquid onto the surface. If water

A

enters the TV, it may result in fire, electric shock,
or malfunction.

Power cord

Remove the accumulated dust or dirt on the power
cord regularly.

6

Lifting and Moving the TV

Using the Joystick Button

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless of
its type and size.

• It is recommended to move the TV in the box or
packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the
power cord and all cables.

• When holding the TV, the screen

should face away from you to
avoid damage.

• Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grille area.

• Use at least two people to move
a large TV.

• When transporting the TV by
hand, hold the TV as shown in the
following illustration.

• When transporting the TV, do not expose the TV
to jolts or excessive vibration.

• When transporting the TV, keep the TV upright;
never turn the TV on its side or tilt towards the
left or right.

(Depending upon model)
You can operate the TV by pressing the button or

moving the joystick left, right, up, or down.

NOTE

• LF51 series does not have a Joystick button but it
only has a power on/off button.

Joystick Button

Basic Functions

When the TV is turned off, place your
finger on the joystick button, press it

Power On

Power Off

Volume
Control

Channels

Control

once, and release it.
When the TV is turned on, place your

finger on the joystick button, press it
once for a few seconds, and release it.
(However, if the menu button is on the
screen, pressing and holding the joystick
button will let you exit the menu.)

If you place your finger over the joystick
button and move it left or right, you can
adjust the volume level.

If you place your finger over the joystick
button and move it up or down, you can
scroll through the saved channels.

ENGLISH

CAUTION

• Avoid touching the screen at all times, as this
may result in damage to the screen.

• Do not place the product on the floor with its
front facing down without padding. Failure to do
so may result in damage to the screen.

• Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur.
(Depending upon model)

NOTE

• With your finger over the joystick button and
move it up, down, left, or right; be careful not to
press the joystick button. If you press the joystick
button first, you may not be able to adjust
the volume level and/or scroll through saved
channels.

7

Adjusting the Menu

When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving
the joystick button up, down, left, or right.

Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing
Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the wall
for proper ventilation.

10 cm

ENGLISH

10 cm

10 cm

10 cm

Securing the TV to a Wall
(optional)

(Depending upon model)

1 Insert and tighten the eye-bolts or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat,
as this may result in fire or other damage.

8

CAUTION

• Make sure that children do not climb on or hang
on the TV.

NOTE

• Use a platform or cabinet that is strong and large
enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
dealer.

Mounting on a Wall

A

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
floor. If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables.
When you do not use LG’s wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough space
to allow connectivity to external devices. If you are
using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then
attach the TV to the mount.

10 cm

32LF510B
32LF510D
43LF510T
43LF5100
43LF540T
43LF5400

Model

VESA (A x B) 200 x 200 300 x 300
Standard screw M6 M6
Number of screws 4 4
Wall mount bracket

(optional)

Model

VESA (A x B) 400 x 400 400 x 400
Standard screw M6 M6
Number of screws 4 4
Wall mount bracket

(optional)

43LF541T
43LF5410
32LF550D
32LF565B
32LF565D
40LF570T
40LF5700
43LF570T

LSW240B
MSW240

50LF5650
55LF565T
55LF5650

LSW440B
MSW240

49LF510T
49LF5100
49LF540T
49LF5400
49LF541T
49LF5410

LSW350B
MSW240

60LF565T
60LF5650

LSW440B

ENGLISH

10 cm

10 cm

10 cm

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.

B

CAUTION

• Disconnect the power before moving or
installing the TV. Otherwise electric shock may
occur.

• Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.

• If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.

• Do not over tighten the screws as this may cause
damage to the TV and void your warranty.

• Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.

9

NOTE

• Use the screws that are listed in the VESA
standard screw specifications.

• The wall mount kit includes an installation
manual and necessary parts.

• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.

• The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.

• For more information, refer to the manual
supplied with the wall mount.

• When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand openings. This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)

Provided Item

Adhesive

ENGLISH

protective label

• When attaching a wall mounting bracket to the
TV, insert the wall mount inner spacers into the
TV wall mount holes to adjust the vertical angle
of the TV. (Use only when provided with your
particular model.)

Provided Item

Connections (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device’s connection,
refer to the manual provided with each device.

NOTE

• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.

• The external device connections shown may
differ slightly from illustrations in this manual.

• Connect external devices to the TV regardless
about the order of the TV port.

• If you connect a gaming device to the TV, use the
cable supplied with the gaming device.

• Refer to the external equipment’s manual for
operating instructions.

Connecting to an Antenna or
Cable

Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.

Wall Mount Spacer

10

CAUTION

• Make sure not to bend the copper wire of the RF
cable.

Copper wire

• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.

NOTE

• To improve the picture quality in a poor signal
area, purchase a signal amplifier.

• Use a signal splitter to use 2 TVs or more.

• If the antenna is not installed properly, contact
your dealer for assistance.

• DTV Audio Supported Codec: MPEG, HE-AAC,
Dolby Digital, Dolby Digital Plus

Other Connections

TV/
RAD

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.

NOTE

• HDMI Audio Supported Format:
DTS (44.1 kHz / 48 kHz),
AC3 (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
(Depending upon model)

Remote Control

(Image shown may differ from your TV.)
The descriptions in this manual are based on the

buttons on the remote control. Please read this
manual carefully and use the TV correctly. To install
batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the
inside the compartment, and close the battery cover.
Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in
fire, personal injury, or ambient pollution. To remove
the batteries, perform the installation actions in
reverse.

This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s remote
sensor.

and ends to the label

A

(POWER) Turns the TV on or off.

Toggles between Radio, TV, CATV, and DTV.

Activates your preferred subtitle in digital mode.

Sets the length of time until the TV to turns off.

Resizes an image.
Changes the input source.

Turns the TV on if it is off.

B

Number button Enters numbers.

Accesses the saved channel list.

Alternates between the two last channels selected

(pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Displays the program event according to time

scheduler.

Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.

ENGLISH

CAUTION

• Do not mix old and new batteries, as this may
damage the remote control.

TV/
RAD

A

B

C

LIVE TV

REC

D

11

C

Changes the picture mode.

Shows information on the current program.

Changes the sound mode.

Accesses the main menu.

Accesses the quick menu.

Navigation buttons
(up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

D

Optimizes picture and audio settings for soccer.

Starts to record.

(only Time Machine

Returns to the LIVE TV.

Control buttons (
Controls the MY MEDIA menus, Time Machine
SIMPLINK compatible devices (USB, SIMPLINK or Time

ENGLISH

Ready

Machine
Color buttons (

These access special functions in some menus.

Ready

supported model)

, , , , )

).

Red, Green, Yellow, Blue)

Ready

or the

Settings

To set up the channels automatically

SETTINGS ➾ CHANNEL ➙ Auto Tuning

Memorizes automatically the channels being
broadcast.

• The channels will not be memorized properly if
the antenna/cable is not installed correctly.

• Auto Tuning memorizes the channels that are
currently being broadcast.

• If Lock System is turned on, a pop-up window
will appear asking for password.

To select Picture Mode

SETTINGS ➾ PICTURE ➙ Picture Mode

Select the picture mode optimized for the viewing
environment or the program.

• Vivid Heightens contrast, brightness, and
sharpness to display vivid images.

• Standard Displays images in standard levels of
contrast, brightness, and sharpness.

• Eco The Energy Saver feature changes settings
on the TV to reduce power consumption.

• Cinema / Game Displays the optimum picture
for movie, game.

• Soccer Optimised picture mode for football
matches. The pitch and kits are presented in
vibrant colours, with crystal-clear images even
for fast movements.

• Expert Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV
viewing. This menu for adjustment is provided
for ISF-certified picture tuning professionals.
(ISF logo can be used only on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified
Calibration Control

• Depending upon input signal, available range of
picture modes may differ.

• Expert mode is for picture tuning professionals
to control and fine-tune using a specific image.
For normal images, the effects may not be
drastic.

12

To set advanced control

SETTINGS ➾ PICTURE ➙ Picture Mode ➙
Advanced Control / Expert Control

For each picture mode, screen can be calibrated;
or for a special screen, picture settings can be
adjusted. Select the desired Picture Mode.

• Dynamic Contrast Adjusts the contrast to

the optimal level according to the image’s
brightness.

• Dynamic Color Adjusts colors to make the

image appear in more natural colors.

• Color Gamut Selects the range of colors that can

be expressed.

• Skin Color Skin color spectrum can be

separately set to implement the skin color as
defined by the user.

• Sky Color Sky color is set separately.

• Grass Color Natural color spectrum (meadows,

hills, etc.) can be separately set.

• Gamma Sets the gradation curve according to

the output of picture signal in relation to the
input signal.

• Edge Enhancer Shows clearer and distinctive

yet natural edges of the video.

• Expert Pattern Patterns used for expert

adjustment.

• Color Filter Filters a specific color spectrum in

RGB colors to fine-tune color saturation and hue
accurately.

• Color Temperature Adjusts the overall tone of

the screen as desired. In Expert mode, detailed
fine-tuning can be set via Gamma method, etc.

• Color Management System This system is used

by experts to adjust color with a test pattern.
They can select from six color areas (Red/ Green/
Blue/ Cyan/ Magenta/ Yellow) without affecting
other colors. For normal images, adjustments
may not result in noticeable color changes.

• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.

To set additional picture options

SETTINGS ➾ PICTURE ➙ Picture Mode ➙ Picture
Option

Adjusts detailed setting for images.

• Noise Reduction Eliminates noise in the picture.

• MPEG Noise Reduction Eliminates noise

generated while creating digital picture signals.

• Black Level Adjusts the brightness and contrast

of the screen to suit the black level of the input
picture by using the blackness (black level) of
the screen.

• Real Cinema Optimizes the screen for movie

viewing.

• Motion Eye Care [Depending upon model]

Saves power consumption by adjusting the
brightness corresponding to the movement of
the image on the screen.

• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.

To use Energy Saving feature

SETTINGS ➾ PICTURE ➙ Energy Saving

Saves electric power by adjusting screen
brightness.

• Off Turns off the Energy Saving.

• Minimum / Medium / Maximum Applies the
pre-set Energy Saving.

• Screen Off Screen is turned off and only sound is
played. Press any button except Power button on
the remote control to turn the screen back on.

To use TV speaker
(Except for LF51 / LF54 Series)

SETTINGS ➾ AUDIO ➙ Sound Out ➙
TV Speaker

Sound is output through the TV speaker.

To use External Speaker
(Except for LF51 / LF54 Series)

SETTINGS ➾ AUDIO ➙ Sound Out ➙
External Speaker (Optical)

[Available only on models with an optical port]
Sound is output through the speaker connected to
the optical port.

• SIMPLINK is supported.

ENGLISH

13

To use Digital Sound Out
(Except for LF51 / LF54 Series)

SETTINGS ➾ AUDIO ➙ Sound Out ➙
External Speaker (Optical) ➙ Digital Sound Out

[Depending upon model]
Sets up Digital Sound Out.

Item Audio Input Digital Audio Output

MPEG
Dolby Digital

Auto

Dolby Digital Plus
HE-AAC

PCM All PCM

PCM
Dolby Digital
Dolby Digital
Dolby Digital

To connect and use LG audio device
(Except for LF51 / LF54 Series)

SETTINGS ➾ AUDIO ➙ Sound Out ➙
LG Sound Sync (Optical)

[Only available for models with an optical port]
Connect LG audio device with the

optical digital audio output port. LG audio device
allows you to enjoy rich powerful sound easily.

ENGLISH

To set AV Sync. Adjust

SETTINGS ➾ AUDIO ➙ AV Sync. Adjust

Synchronizes unmatched video and audio. Select
AV Sync. Adjust to On to synchronize audio
output (TV speaker or SPDIF) with the video.

To use SIMPLINK

SIMPLINK controls and manages multimedia
devices conveniently with the TV remote control
through the SIMPLINK menu.

1 Connect the HDMI IN terminal and SIMPLINK

device’s HDMI output terminal using an HDMI
cable.

- [Depending upon model] For home theater
units with SIMPLINK function, connect HDMI
terminals as above, and use an optical cable
to connect Optical Digital Audio Out from the
TV to Optical Digital Audio In of the SIMPLINK
device.

2 Select INPUT ➾ SIMPLINK. SIMPLINK menu

window appears.

3 In SIMPLINK Setting window, set SIMPLINK

function to ON.

4 In SIMPLINK menu window, select the device to

control.

logo to the

• This function is only compatible with devices
having the SIMPLINK logo.

• To use SIMPLINK function,use high-speed HDMI
cable (with CEC (Consumer Electronics Control)
feature added). High-speed HDMI® cable has
pin No. 13 connected for information exchange
between devices.

• When changing to another input, the SIMPLINK
device stops.

• If a third-party device with HDMI-CEC support
is added, the SIMPLINK device may not work

-normally.

• [Depending upon model] When selecting or
playing the media of the device with home
theater function, HT Speaker is automatically
connected. Be sure to connect with Optical cable
(sold separately) to use HT Speaker function.

SIMPLINK function description

• Direct Play: Plays the multimedia device on the
TV instantly.

• Select multimedia device: Selects the desired
device through SIMPLINK menu and control the
device from the TV screen instantly.

• Disc playback: Manages the multimedia device
with the TV remote control.

• Power off all devices: When you power off the
TV, all connected devices are turned off.

• Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, the TV will automatically turn on.

• Speaker: [Depending upon model] Selects
either home theater unit or TV speaker.

To set the password

SETTINGS ➾ LOCK ➙ Set Password

Set or change the TV password.

• The initial password is set to 0000.

To set the caption

SETTINGS ➾ OPTION ➙ Caption

View captions when the TV station provides
captioned programming. Program captions work
only on analog broadcasts or external input.

Change Caption to On and select caption settings.

• Mode
CC 1-2 (Closed Captioning) / Text 1-2: Displays
the audio portion of a TV program as text on the
TV screen. CC1 is the most common mode in use.

®

14

To return to initial settings

SETTINGS ➾ OPTION ➙ Factory Reset

Returns to initial default mode by deleting all
optional setup. Once initialization is completed,
the TV will turn off and on by itself.

• When Lock System is in place, a pop-up window

appears and asks for password.

• Do not turn off the power during initialization.

To remove the USB device

Q.MENU ➾ USB Device

Once the message that the USB device was
removed is displayed, remove the device from the
TV.

• After selecting to remove USB device, the USB
storage device cannot be read. Remove the USB
storage device and then reconnect it.

Warning when using USB storage
devices

• USB storage devices with a built-in auto
recognition program or its own driver may not
work.

• Some USB storage devices may not work or may
work improperly.

• Use only those USB storage devices formatted
with FAT32 or NTFS File System provided by
Windows.

• For external USB HDD, use devices with less than
5V-rated voltages and 500 mA-rated current.

• It is recommended to use USB flash drive with 32
GB or less and USB HDD with 2 TB or less.

• If a USB HDD with power-saving function does
not work properly, turn the power off and on.
For more information, refer to the user manual
of USB HDD.

• Data in the USB storage device can be damaged
so back up important files in other devices. Data
maintenance is the user’s responsibility. The
manufacturer is not responsible for data loss.

My Media Supported Files

• Maximum data transfer rate: 20 Mbps (Mega bit
per second)

• External supported subtitle formats:
*.srt (SubRip), *.smi (SAMI), *.sub (SubViewer,
MicroDVD, DVDsubtitleSystem, SubIdx(Vobsub)),
*.ass/*.ssa (SubStation Alpha), *.txt (TMplayer),
*.psb (PowerDivX)

• Internal supported subtitle formats:
*.dat/*.mpg/*.mpeg/*.vob (DVD Subtitle),
*.ts/*.tp/*.m2ts (DVB Subtitle), *.mp4 (DVD
Subtitle, UTF-8 Plain Text), *.mkv (ASS, SSA,
UTF-8 Plain Text, Universal Subtitle Format,
VobSub, DVD Subtitle), *.divx/*.avi(XSUB1,
XSUB+)

XSUB1 Supports internal subtitles generated

from DivX6

Supported Photo Formats

• Category: 2D (jpeg, jpg, jpe)
[Available file type]
SOF0: Baseline,
SOF1: Extend Sequential, SOF2: Progressive
[Photo size] Minimum: 64 x 64,
Maximum: Normal Type: 15,360 (W) x 8,640 (H),
Progressive Type: 1,920 (W) x 1,440 (H)

• Category: BMP
[Photo size] Minimum: 64 x 64, Maximum: 9,600
x 6,400

• Category: PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum: 64 x 64, Maximum:
Interlace: 1,200 x 800, Non-Interlace: 9,600 x
6,400

• BMP and PNG format files may be slower to
display than JPEG.

Supported Audio Formats

• File type: mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG-1, MPEG-2, Layer2, Layer3

• File Type: AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS

• File Type: M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4

• File Type: WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard

ENGLISH

15

• File Type: WMA 10Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0: up to 2 Channel @ 48 kHz (Except LBR
mode),
M1: up to 5.1 Channel @ 48 kHz,
M2: up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro

• File Type: OGG
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] OGG Vorvis

Supported Video Formats

• Maximum: 1,920 x 1,080 @ 30p (only Motion
JPEG 640 x 480 @ 30p)

• .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XViD, H.264/AVC, VC1(WMV3,
WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC,
AC3, 3D WMV Single Stream

• .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XViD, H.264/AVC

ENGLISH

[Audio] HE-AAC, LPCM, ADPCM, MPEG-1 Layer I,
MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III
(MP3)

• .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1
Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC, HE-AAC

• .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG-1
Layer II, DVD-LPCM

• .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3)

• .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4,
DivX5, DivX6, XVID, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III
(MP3), LPCM

• motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM

• .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby
Digital, LPCM

• .dat
[Video] MPEG-1, MPEG-2
[Audio] MP2

• .flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC

16

• .3gp, .3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)

To See the Web Manual

Web manual allows you to easily access detailed TV
information.

Go to

http://www.lg.com

.

Specifications

Product specifications may be changed without
prior notice due to upgrade of product functions.

Television System

NTSC-M, PAL-M/N, DVB-T, DVB-T2

Program Coverage

VHF 2-13, UHF 14-69, CATV 1-125, DTV 2-69

External Antenna Impedance

75 Ω

Environment condition

• Operating Temperature

0 °C to 40 °C

• Operating Humidity

Less than 80 %

• Storage Temperature

-20 °C to 60 °C

• Storage Humidity
Less than 85 %

HDMI (PC) supported mode

(Use HDMI IN 1 for PC mode)

Resolution

640 x 350 31.46 70.09
720 x 400 31.46 70.08
640 x 480 31.46 59.94
800 x 600 37.87 60.31
1024 x 768 48.36 60.00
1152 x 864 54.34 60.05
1360 x 768 47.71 60.01
1280 x 1024 63.98 60.02
1920 x 1080 67.50 60.00

Except for 32LF510B, 32LF510D, 32LF550D,

32LF565B, 32LF565D

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

HDMI (DTV) supported mode

Resolution

640 x 480p

720 x 480p

1280 x 720p

1920 x 1080i

1920 x 1080p

Horizontal

Frequency (kHz)

31.46 59.94

31.50 60.00

31.47 59.94

31.50 60.00

37.50 50.00

44.96 59.94

45.00 60.00

28.12 50.00

33.72 59.94

33.75 60.00

26.97 23.97

27.00 24.00

33.71 29.97

33.75 30.00

56.25 50.00

67.43 59.94

67.50 60.00

Frequency (Hz)

Component port connecting
information

Component ports on the TV Y PBP

Y P

Video output ports on DVD player

Y B-Y R -Y
Y Cb Cr
Y Pb Pr

Component supported mode

Resolution

720 x 480i

720 x 480p

1280 x 720p

1920 x 1080i

1920 x 1080p

Horizontal

Frequency (kHz)

15.73 59.94

15.73 60

31.47 59.94

31.50 60

44.96 59.94

45.00 60.00

28.12 50.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.000

33.71 29.97

33.75 30.000

56.25 50.00

67.43 59.939

67.50 60.00

Frequency (Hz)

Vertical

BPR

Vertical

Open Source Software Notice
Information

To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product,
please visit

http://opensource.lge.com

.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.

LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to

[e-mail].

This offer is valid for three
(3) years from the date on which you purchased
the product.

Troubleshooting

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed
over the receiver.

- Check if there is any obstacle between the
product and the remote control.

R

- Replace the batteries with new fresh ones.

• No image display and no sound is produced.

ENGLISH

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by
connecting other products.

• The TV turns off suddenly.

- Check the power control settings.
The power supply may be interrupted.

- Check if the Off Time / Sleep Timer feature is
activated in the TIME settings.

- If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of
inactivity.

External Control Device Setup

To obtain the external control device setup
information, please visit

www.lg.com

.

17

Licenses

Supported licenses may differ by model.
For more information about licenses,
visit

www.lg.com

Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.

This DivX Certified® device has passed rigorous

ENGLISH

testing to ensure it plays DivX® video. To play
purchased DivX movies, first register your device
at vod.divx.com. Find your registration code in
the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD
1080p, including premium content. DivX®, DivX
Certified® and associated logos are trademarks of
DivX, LLC and are used under license.

Covered by one or more of the following
U.S. patents: 7,295,673; 7,460,668; 7,515,710;
7,519,274.

.

18

The model and serial numbers of the TV are located
on the back and on one side of the TV. Record them
below should you ever need service.

MODEL
SERIAL

OWNER’S MANUAL

EXTERNAL CONTROL
DEVICE SETUP

Please read this manual carefully before operating the set and retain it for
future reference.

www.lg.com

KEY CODES

2

2

ENGLISH

ENG

KEY CODES

• This feature is not available for all models.

Code

(Hexa)

00 CH +, PR + R/C Button 53 List R/C Button

01 CH -, PR - R/C Button 5B Exit R/C Button

02 Volume + R/C Button 60 PIP(AD) R/C Button

03 Volume - R/C Button 61 Blue R/C Button

06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button

07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button

08 Power R/C Button 72 Red R/C Button

09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button

0B Input R/C Button 91 AD (Audio Description) R/C Button

0E SLEEP R/C Button 7A User Guide R/C Button

0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button

10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button

1A Q.View / Flashback R/C Button 8E ►► (Forward) R/C Button

Function Note

Code

(Hexa)

Function Note

1E FAV (Favorite Channel) R/C Button 8F ◄◄ (Rewind) R/C Button

20 Text (Teletext) R/C Button AA Info R/C Button

21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button

28 Return (BACK) R/C Button B0 ► (Play) R/C Button

30 AV (Audio / Video) Mode R/C Button B1

39 Caption/Subtitle R/C Button BA

40 Λ

41

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 99 AutoConfig R/C Button

44 OK / Enter R/C Button 9F App / * R/C Button

45 Q.Menu R/C Button

4C List, - (ATSC Only) R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

(Arrow Key / Cursor Up)

V (Arrow Key / Cursor

Down)

R/C Button BB Soccer R/C Button

R/C Button BD

ꕗ (Stop / File List)

ꕘ (Freeze / Slow Play /

Pause)

ꔄ (REC)

R/C Button

R/C Button

R/C Button