LG 49LB5500, 50LB5610 User Manual [es]

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your TV and retain it for future reference.

32LB550B 42LB5500 49LB5500

P/NO : MFL67987102 (1401-REV01) www.lg.com

32LB560B 32LB5600 39LB5600 42LB5600 47LB5600 50LB5600 55LB5600

32LB561B 39LB5610 42LB5610 47LB5610 50LB5610 55LB5610 60LB5610

*MFL67987102*

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of

ENGLISH

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

• Do not allow the television to become wet.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not stick metal objects or any other

conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Keep the packing anti-moisture material

or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• CAUTION concerning the Power Cord

(Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Warning - To reduce the risk of fire or

electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this

ENGLISH

product.

• Outdoor Antenna Grounding

(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

• Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.

• Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

• If you smell smoke or other odors coming

from the TV, unplug the power cord and contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during

a lightning storm.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to

fall into the product, and do not drop anything onto the screen.

• DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The plug must remain readily operable.

• Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your

community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow

the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

• Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Generated Sound

Cracking noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

• Take care not to touch the ventilation

openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

• If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to

ENGLISH

vod.divx.com

DivX Certified

DivX subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

for more information on how to complete your registration.

to play DivX® video up to HD 1080p, including premium content.

, DivX Certified® and associated logos are trademarks of Rovi Corporation or its

device must be registered

www.lg.com

divx.com

for more

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

http://opensource.lge.com

. In addition to the source code, all referred license

NOTE

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

• The available menus and options may differ from the input source or product model that you are

using.

• New features may be added to this TV in the future.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

Remote Control, Batteries (AAA)

Stand Base Stand Screws

Cable Holder Stand Holder

Owner’s Manual Power Cord

(For 32LB550B, 32LB560B, 32LB5600, 32LB561B)

4 EA, M4 x L20

2 EA

(For 42/49LB5500, 39/42/47/50/55LB5600, 39/42/47/50/55/60LB5610)

Stand Screws

4 EA, M4 x L14

(For 42LB5500, 42LB5600, 42LB5610)

Wall Mount Inner Spacers

2 EA

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

• Do not use any unapproved items to ensure the safety and product’s lifespan.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some models appear to have a thin film on the screen. It is actually part of the screen; do not

remove it.

NOTE

• The items supplied with your product may vary depending upon the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB flash drive does not fit into your TV’s USB port.

ENGLISH

*A 10 mm *B 18 mm

Parts and buttons

Screen

Speakers

Power Indicator Remote Control Sensor

ASSEMBLING AND PREPARING

NOTE

• Joystick button is located

below the screen of TV.

Joystick Button

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume Control

Channels Control

NOTE

• With your finger over the joystick button, move it up, down, left, or right, be careful not to press the

joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll through saved channels.

Adjusting the menu

When the TV is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button up, down, left, or right.

When the TV is turned off, place your finger on the joystick button, press it once and release it.

When the TV is turned on, place your finger on the joystick button, press it once for a few seconds and release it. (However, if the menu button is on the screen, pressing and holding the joystick button will let you exit the menu.)

If you place your finger over the joystick button, move it left or right, you can adjust the volume level you want.

If you place your finger over the joystick button, move it up or down, you can scroll through the saved channels you want.

TV off

Settings

Input List

Turns the power off. Accesses the main menu. Clears on-screen displays and returns to TV viewing. Changes the input source.

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to do so may result in damage to the screen.

• It is recommended to move the TV in the

box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the

ENGLISH

screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

Setting up the TV

Attaching the stand

CAUTION

• When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

A Stand Base

B Stand Base

(For 32LB550B, 32LB560B, 32 LB5600, 32LB561B)

• Use at least two people to

move a large TV.

• When transporting the TV by

hand, hold the TV as shown in the following illustration.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt towards the left or right.

4 EA M4 x L20

(For 42/49LB5500, 39/42/47/50/55 LB5600, 39/42/47/ 50/55/60LB5610)

4 EA M4 x L14

ASSEMBLING AND PREPARING

Mounting on a table

Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources

of heat, as this may result in fire or other damage.

Securing the TV to a wall (optional)

(Depending upon model)

1 Insert and tighten the eye-bolts, or TV

brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to

the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets

tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

ENGLISH

CAUTION

• Make sure that children do not climb on or

hang on the TV.

NOTE

• Use a platform or cabinet that is strong and

large enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You

can obtain additional accessories from your local dealer.

ASSEMBLING AND PREPARING

Mounting on a wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount.

10 cm

ENGLISH

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

42LB5500

32LB550B 32LB560B

Model

VESA (A x B)

Standard screw M6 M6 Number of screws 4 4 Wall mount bracket

(optional)

Model 60LB5610 VESA (A x B)

Standard screw M6 Number of screws 4 Wall mount bracket

(optional)

32LB5600 39LB5600 32LB561B 39LB5610

200 x 200 400 x 400

LSW240B MSW240

400 x 400

LSW440B

49LB5500 42LB5600 47LB5600 50LB5600 55LB5600 42LB5610 47LB5610 50LB5610 55LB5610

LSW440B MSW240

ASSEMBLING AND PREPARING

CAUTION

• Disconnect the power before moving or

installing the TV. Otherwise electric shock may occur.

• If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

• Do not over tighten the screws as this may

cause damage to the TV and void your warranty.

• Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

• Use the screws that are listed in the VESA

standard screw specifications.

• The wall mount kit includes an installation

manual and necessary parts.

• The wall mount bracket is optional. You can

obtain additional accessories from your local dealer.

• The length of screws may differ depending

upon the wall mount. Make sure to use the proper length.

• For more information, refer to the manual

supplied with the wall mount.

• (For 42LB5500, 42LB5600, 42LB5610)

When attaching a third-party wall mounting bracket to the TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket.

Wall Mount Inner Spacers

ENGLISH

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

• The external device connections shown may differ slightly from illustrations in this manual.

• Connect external devices to the TV regardless about the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional.

ENGLISH

Antenna

Terminal

CAUTION

• Make sure not to bend the copper wire of

the RF cable.

Copper wire

• Complete all connections between devices,

and then connect the power cord to the power outlet to prevent damage to your TV.

VHF Antenna

UHF Antenna

Coaxial (75Ω)Coaxial (75Ω)

(*Not provided)(*Not provided)

Wall Jack

NOTE

• To improve the picture quality in a poor

signal area, purchase a signal amplifier.

• Use a signal splitter to use 2 TVs or more.

• If the antenna is not installed properly,

contact your dealer for assistance.

• DTV Audio Supported Codec: MPEG, AAC,

HE-AAC

MAKING CONNECTIONS

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.

Digital Audio

System

OPTICAL

DIGITAL

AUDIO OUT

VIDEO AUDIO

VIDEO/Y PB PR

COMPONENT IN / AV IN 1

Blu-Ray / HD Cable Box

/ HD STB / DVD / PC

HDMIOPTICAL AUDIO IN

AV IN 2

L/MONO R

CABLE

AUDIO

L/MONO

ANTENNA

ENGLISH

USB

USB IN(Time Machine Ready)

IN 2 (MHL)

MHL Cable

GREEN

BLUE

PB PRY RL

VIDEO AUDIO

Blu-Ray / HD Cable Box / DVD / VCR

RED

WHITE

RED

YELLOW

WHITE

VIDEO RAUDIOL/MONO

RED

Mobile phone

HDMI

Blu-Ray / HD Cable Box

/ HD STB / DVD

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse.

CAUTION

• Do not mix old and new batteries, as this may damage the remote control.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

(POWER) Turns the TV on or off. TV Returns to the last TV channel. CAPTION Activates or deactivates the subtitles. SLEEP Sets the length of time until the TV to turns off.

RATIO Resizes an image.

ENGLISH

LIVE TV

REC

INPUT Changes the input source. Turns the TV on if it is off.

Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as 2-1 and 2-2. LIST Accesses the saved channel list. Q.VIEW Alternates between the two last channels selected (pressing

repeatedly).

VOL Adjusts the volume level. FAV Accesses your favorite channel list. GUIDE Displays the program event according to time scheduler.

Mutes all sounds.

MUTE

CH Scrolls through the saved channels.

PAGE Moves to the previous or next screen. PICTURE Changes the image mode. INFO

Shows information on the current program.

SOUND Changes the sound mode. SETTINGS Accesses the main menu. Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

BACK Returns to the previous screen.

EXIT Clears all on-screen displays and returns to TV viewing.

Optimizes picture and audio settings for soccer.

Starts to record. (only Time Machine supported model)

REC LIVE TV Returns to the LIVE TV. Control buttons (

or the SIMPLINK compatible devices (USB, SIMPLINK or Time Machine). Color buttons (

special functions in some menus.

, , , , ) Controls the MY MEDIA menus, Time Machine

: Red, : Green, : Yellow, : Blue) These access

SETTINGS

To set up the channels automatically

SETTINGS ➾ CHANNEL ➙ Auto Tuning

Memorizes automatically the channels being broadcast.

• The channels will not be memorized properly

if the antenna/cable is not installed correctly.

• Auto Tuning memorizes the channels that are

currently being broadcast.

• If Lock System is turned on, a pop-up

window will appear asking for password.

About Interactivity (DTVi)

(Depending upon country) This TV has the interactivity feature of Digital

TV (DTVi) that allows using applications, also known as Ginga

• By selecting a digital channel that has

interactivity, it will be possible to visualize and interact with applications transmitted by broadcasters. The contents can vary and some examples are: weather forecast, real time news, traffic situation, soap operas and program descriptions, interactive games, access to bank accounts, government services, soccer information and other sports.

• The interactivity return channel is available

only on those TV models that have an Ethernet port and that are set correctly.

To adjust pictures with Picture Wizard

SETTINGS ➾ PICTURE ➙ Picture Wizard III

This function calibrates and adjusts for optimum picture quality with the remote control and the Picture Wizard without expensive pattern devices or help from a specialist. Follow the instructions on the screen to obtain the optimum picture quality.

To select Picture Mode

SETTINGS ➾ PICTURE ➙ Picture Mode

Select the picture mode optimized for the viewing environment or the program.

• Vivid Heightens contrast, brightness and

sharpness to display vivid images.

• Standard Displays images in standard levels

of contrast, brightness and sharpness.

• Eco The Energy Saver feature changes

settings on the TV to reduce power consumption.

• Cinema / Game Displays the optimum picture

for movie, game.

• Soccer Optimised picture mode for football

matches. The pitch and kits are presented in vibrant colours, with crystal-clear images even for fast movements.

• Expert Menu for adjusting picture quality that

allows experts and amateurs to enjoy the best TV viewing. This menu for adjustment is provided for ISF-certified picture tuning professionals. (ISF logo can be used only on ISF-certified TVs.) ISFccc: Imaging Science Foundation Certified Calibration Control

• Depending upon input signal, available range

of picture modes may differ.

• Expert mode is for picture tuning

professionals to control and fine-tune using a specific image. For normal images, the effects may not be drastic.

ENGLISH

+ 39 hidden pages