LG 47LM96, LM96, 60LM96, 55LM96, 84LM96 User Manual

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it
for future reference.

LM96

P/NO : MFL67441727 (1210-REV03)
Printed in Korea

**

www.lg.com

TABLE OF CONTENTS

2

ENGLISH

ENG

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 SAFETY INSTRUCTIONS

10 Viewing 3D Imaging

12 INSTALLATION PROCEDURE

12 ASSEMBLING AND PREPARING

12 Unpacking
15 Separate purchase
16 Parts and buttons
17 Lifting and moving the TV
18 Setting up the TV

18 - Attaching the stand
20 - Mounting on a table
21 - Mounting on a wall
22 - Tidying cables

34 MAINTENANCE

34 Cleaning Your TV
34 - Screen, frame, cabinet and stand
34 - Power cord

34 TROUBLESHOOTING

35 SPECIFICATIONS

24 MAKING CONNECTIONS

24 Antenna connection
25 HDMI connection
26 DVI to HDMI connection
26 MHL connection
27 RGB-PC connection
27 Component connection
28 Composite connection
28 Audio connection

28 - Digital optical audio connection
29 USB connection

30 MAGIC REMOTE CONTROL FUNC-

TIONS

31 Registering magic remote control
31 How to use magic remote control
31 Precautions to take when using the magic

remote control

32 REMOTE CONTROL

33 USING THE USER GUIDE

WARNING

If you ignore the warning message, you

y

may be seriously injured or there is a
possibility of accident or death.

CAUTION

If you ignore the caution message, you

y

may be slightly injured or the product may
be damaged.

NOTE

The note helps you understand and use

y

the product safely. Please read the note
carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software tools to convert your files into
DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registra­tion code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com
for more information on how to complete your registration.

3

ENGLISH

ENG

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of
DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of per­forming such distribution (such as the cost of media, shipping and handling) upon email request to open­[e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

ENGLISH

ENG

SAFETY INSTRUCTIONS

4

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and remote control in the following environments:

y

» A location exposed to direct sunlight
» An area with high humidity such as a bathroom
» Near any heat source such as stoves and other devices that produce heat
» Near kitchen counters or humidifiers where they can easily be exposed to steam or

oil
» An area exposed to rain or wind
» Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.

Do not place the product where it might be exposed to dust.

y

This may cause a fire hazard.

Mains plug is the disconnecting device. The plug must remain readily operable.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or

y

covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.

Make sure to connect the power cable to the grounded current. (Except for devices

y

which are not grounded.)
You may be electrocuted or injured.

Fix the power cable completely.

y

If the power cable is not fixed completely, a fire can break out.

Ensure the power cord does not come into contact with hot objects such as a

y

heater.
This may cause a fire or an electric shock hazard.

Do not place a heavy object, or the product itself, on power cables.

y

Otherwise, this may result in fire or electric shock.

Bend antenna cable between inside and outside building to prevent rain from

y

flowing in.
This may cause water damaged inside the Product and could give an electric shock.

SAFETY INSTRUCTIONS

5

WARNING

When mounting a TV it on the wall, make sure not to install TV by hanging power

y

and signal cables on the back of the TV.
It may cause fire, electric shock.

Do not plug too many electrical devices into a single multiple electrical outlet.

y

Otherwise, this may result in fire due to over-heating.

Do not drop the product or let it fall over when connecting external devices.

y

Otherwise, this may result in injury or damage to the product.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

y

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.

Do not let your children climb or cling onto the TV.

y

Otherwise, the TV may fall over, which may cause serious injury.

ENGLISH

ENG

Dispose of used batteries carefully to protect a child from eating them.

y

Please seek Doctor- Medical Attention immediately if child consumes batteries.

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

y

screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)

Do not put or store inflammable substances near the product.

y

There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the

y

product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.

Do not spray water on the product or scrub with an inflammable substance (thinner

y

or benzene). Fire or electric shock accident can occur.

Do not allow a impact shock or any objects to fall into the product, and do not drop

y

onto the screen with something.
You may be injured or the product can be damaged.

SAFETY INSTRUCTIONS

6

ENGLISH

ENG

WARNING

Never touch this product or antenna during a thunder or lighting storm.

y

You may be electrocuted.

Never touch the wall outlet when there is leakage of gas, open the windows and

y

ventilate.
It may cause a fire or a burn by a spark.

Do not disassemble, repair or modify the product at your own discretion.

y

Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.

If any of the following occur, unplug the product immediately and contact your local

y

service centre.
» The product has been impacted by shock
» The product has been damaged
» Foreign objects have entered the product
» The product produced smoke or a strange smell
This may result in fire or electric shock.

If you don’t intend to use the product for a long time, unplug the power cable from

y

the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.

CAUTION

Apparatus shall not be exposed to dripping or splashing and no objects filled with

y

liquids, such as vases, shall be placed on the apparatus.

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power lines to

y

keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.

Do not install the product on places such as unstable shelves or inclined surfaces.

y

Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.

If you install the TV on a stand, you need to take actions to prevent the product from

y

overturning. Otherwise, the product may fall over, which may cause injury.

SAFETY INSTRUCTIONS

7

CAUTION

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts)

y

to the back of the product. When you install the set to use the wall mounting bracket (optional parts),
fix it carefully so as not to drop.

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult a qualified service man.

y

This may create a fire hazard or an electric shock hazard.

We recommend that you maintain a distance of at least 2 to 7 times the diagonal

y

screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.

Only use the specified type of battery.

y

This could cause damage to the remote control.

Do not mix new batteries with old batteries.

y

This may cause the batteries to overheat and leak.

ENGLISH

ENG

Make sure there are no objects between the remote control and its sensor.

y

Signal from the remote control may be disturbed by sun light or other strong light. In

y

this case, darken the room.

When connecting external devices such as video game consoles, make sure the

y

connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.

Do not turn the product On/Off by plugging-in or unplugging the power plug to the

y

wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.

Please follow the installation instructions below to prevent the product from

y

overheating.
» The distance between the product and the wall should be more than 10 cm.
» Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a

cupboard).
» Do not install the product on a carpet or cushion.
» Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.

SAFETY INSTRUCTIONS

8

ENGLISH

ENG

CAUTION

Take care not to touch the ventilation openings when watching the TV for long

y

periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.

Periodically examine the cord of your appliance, and if its appearance indicates damage or

y

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.

Prevent dust collecting on the power plug pins or outlet.

y

This may cause a fire hazard.

Protect the power cord from physical or mechanical abuse, such as being twisted,

y

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.

Do not press strongly upon the panel with a hand or sharp object such as nail,

y

pencil or pen, or make a scratch on it.

Avoid touching the screen or holding your finger(s) against it for long periods of time.

y

Doing so may produce some temporary distortion effects on the screen.

When cleaning the product and its components, unplug the power first and wipe it

y

with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source

y

even if you turn off this unit by SWITCH.

When unplugging the cable, grab the plug and unplug it.

y

If the wires inside the power cable are disconnected, this may cause fire.

When moving the product, make sure you turn the power off first. Then, unplug the

y

power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.

When moving or unpacking the product, work in pairs because the product is heavy.

y

Otherwise, this may result in injury.

SAFETY INSTRUCTIONS

9

CAUTION

Contact the service center once a year to clean the internal parts of the product.

y

Accumulated dust can cause mechanical failure.

Refer all servicing to qualified service personnel. Servicing is required when the

y

apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

If the product feels cold to the touch, there may be a small “flicker” when it is turned

y

on. This is normal, there is nothing wrong with product.

The panel is a high technology display product with resolution of two million to six

y

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange
or refund.

You may find different brightness and colour of the panel depending on your viewing

y

position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.

ENGLISH

ENG

Displaying a still image (e.g., broadcasting channel

y

logo, on-screen menu, scene from a video game) for
a prolonged time may cause damage to the screen,
resulting in retention of the image, which is known as

If an image remains still for a while,

y

the screen may become dim in order
to minimize the power consumption.
The screen gets brighter again when
you operate the remote control or a
different image appears.
(Only 84LM96**)

Generated Sound

y

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.

image sticking. The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your television’s screen
for a prolonged period (2 or more hours for LCD, 1 or
more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time,
image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and
is not subject to exchange or refund.

SAFETY INSTRUCTIONS

10

ENGLISH

ENG

Viewing 3D Imaging

WARNING

Viewing Environment

Viewing Time

y

When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

Some users may experience a seizure or other abnormal symptoms when they are exposed to a

y

flashing light or particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as

y

epilepsy, cardiac disorder, or blood pressure disease, etc.
3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.

y

Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have

y

trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent
breaks than the average adult.
If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

y

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

y

When these symptoms are experienced, stop using/watching 3D contents and get enough rest until

y

the symptom subsides.
» Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,

dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

SAFETY INSTRUCTIONS

11

CAUTION

Viewing Environment

Viewing Distance

y

Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

Infants/Children

y

Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring and
extra attention is required for children watching 3D contents.
Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth
compared to adults for the same 3D image.

Teenagers

y

Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents.
Advise them to refrain from watching 3D contens for a long time when they are tired.

Elderly

y

The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the
recommended distance.

ENGLISH

ENG

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

y

Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

y

Using modified 3D glasses may cause eye strain or image distortion.

y

Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

y

The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when

y

wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

A

A

12

ENGLISH

ENG

NOTE

y Image shown may differ from your TV.
y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y The available menus and options may differ from the input source or product model that you are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be

turned off if it will not be watched for some time, as this will reduce energy consumption.

y The energy consumed during use can be significantly reduced if the level of brightness of the picture is

reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.

CAUTION

y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
y Some models have a thin film attached on to the screen and this must not be removed.

NOTE

y The items supplied with your product may vary depending on the model.
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of

product functions.

y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and

18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.

B

B

A 10 mm
B 18 mm

ASSEMBLING AND PREPARING

13

ENGLISH

ENG

P

Owner’s manual Magic remote control,

batteries (AA)

(See p.30)

Composite video cable

(See p.27, 28)

Dual play glasses

(Depending on model)

Component video cable

(See p.27)

Polishing cloth

(Depending on model)
Use this to remove dust from
the cabinet.

Remote control,
batteries (AAA)

(See p.32)

Cinema 3D glasses

The number of 3D glasses
may differ depending on the
model or country.

or

Isolator

(Depending on model)
(See p.15)

ASSEMBLING AND PREPARING

14

ENGLISH

ENG

Only 47/55/60LM96

Stand body

(See p.18)

Only 84LM96

**

**

Stand base

(See p.18)

Stand screws

8 EA, M4 x 20
(See p.18)

Stand body

(See p.19)

Cable holder

(Depending on model)
(See p.23)

Stand base

(See p.19)

Stand screws

4 EA, M4 x 20 / 6 EA, M5 x 16
(See p.19)

ASSEMBLING AND PREPARING

15

CAUTION

If there is a Isolator, follow as shown.

y

» Use this to install TV in a place where there is a voltage difference between TV set and GND of

antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the
antenna contact might be heated and excessive heat might cause an accident.

» You can improve the safety when watching TV by efficiently removing power voltage from TV

antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

» Before starting, be sure that the TV antenna is connected.

Connect to TV.

Wall

ANTENNA/

CABLE IN

Cable / Antenna

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection
to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

or

Isolator

Connect to Set-Top box.

ENGLISH

ENG

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.

P

AN-MR300

Magic remote control

AG-F2**, AG-F3**, AG-F4

Cinema 3D glasses

AG-F2**DP, AG-F3**DP

**

Dual play glasses

The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.

AN-VC

***

Video call camera

ASSEMBLING AND PREPARING

16

ENGLISH

ENG

Parts and buttons

60/84LM96

Screen

Speakers

**

Remote control and
intelligent sensors

LG Logo Light

1

OK

SETTINGS

S

INPUT

Buttons

47/55LM96

Screen

**

OK

SETTINGS

S

INPUT

Button

Scrolls through the saved programmes.

Speakers

Remote control and
intelligent sensors

Description

1

Buttons
Power
Indicator

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

y You can set the power indicator light to on or off by selecting OPTION in the main menus.

(Depending on model)

ASSEMBLING AND PREPARING

17

Lifting and moving the TV

Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.

CAUTION

y Avoid touching the screen at all times, as this

may result in damage to the screen.

It is recommended to move the TV in the box

y

or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the

y

power cord and all cables.
When holding the TV, the screen should face

y

away from you to avoid damage.

When transporting a large TV, there should be

y

at least 2 people.
When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

When transporting the TV, do not expose the

y

TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright, never turn the TV on its side or tilt
towards the left or right.

ENGLISH

ENG

Hold the top and bottom of the TV frame firmly.

y

Make sure not to hold the transparent part,
speaker, or speaker grill area.

ASSEMBLING AND PREPARING

Stand base

18

ENGLISH

ENG

Stand base

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

47/55/60LM96

Stand body

2

**

Top View

4 EA
M4 x 20

Front

31

4 EA
M4 x 20

CAUTION

y When attaching the stand to the TV set,

place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.

CAUTION

y Make sure that the screws are inserted

correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be
damaged and not tighten correctly.

NOTE

y Remove the stand before installing the TV on

a wall mount by performing the stand
attachment in reverse.

ASSEMBLING AND PREPARING

19

84LM96

Stand base

**

Stand body

2

ENGLISH

ENG

41

4 EA
M4 x 20

Front

6 EA

M5 x 16

Front

3

CAUTION

y When attaching the stand to the TV set,

place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.

CAUTION

y Make sure that the screws are inserted

correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be
damaged and not tighten correctly.

NOTE

y Remove the stand before installing the TV on

a wall mount by performing the stand
attachment in reverse.

ASSEMBLING AND PREPARING

20

ENGLISH

ENG

Mounting on a table

Lift and tilt the TV into its upright position on a

1

table.

- Leave a 10 cm (minimum) space from the
wall for proper ventilation.

10 cm

10 cm

Connect the power cord to a wall outlet.

2

CAUTION

y Use a dedicated power cord. Do not modify or

extend the power cord.

y Do not place the TV near or on sources of

heat, as this may result in fire or other damage.

10 cm

10 cm

Adjusting the angle of the TV to suit view

47/55/60LM96

Swivel 10 degrees to the left or right and adjust the
angle of the TV to suit your view.

10˚

84LM96

Swivel 7 degrees to the left or right and adjust the
angle of the TV to suit your view.

7˚

**

10˚

**

7˚

CAUTION

y When adjusting the angle of the product, watch

out for your fingers.
Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.

Front Rear

ASSEMBLING AND PREPARING

21

Securing the TV to a wall

This feature is not available for all models.

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall.
Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

Mounting on a wall

Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.

Wall mount bracket

ENGLISH

ENG

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope.
Make sure to keep the rope horizontal with the

flat surface.

CAUTION

y Make sure that children do not climb on or

hang on the TV.

NOTE

y Use a platform or cabinet that is strong and

large enough to support the TV securely.

y Brackets, bolts and ropes are not provided.

You can obtain additional accessories from
your local dealer.

Model 47/55/60LM96**84LM96

VESA (A x B) 400 x 400 600 x 400
Standard
screw

Number of
screws

Wall mount
bracket

M6 M8

4 4

LSW400BX

LSW420BX

A

B

LSW600B

**

ASSEMBLING AND PREPARING

22

ENGLISH

ENG

CAUTION

y Disconnect the power first, and then move or

install the TV. Otherwise electric shock may
occur.

y Use a dedicated power cord. Do not modify or

extend the power cord.

y If you install the TV on a ceiling or slanted

wall, it may fall and result in injury. Use an
authorized LG wall mount bracket and
contact the local dealer or qualified
personnel.

y Do not over tighten the screws as this may

cause damage to the TV and void your
warranty.

y Use the screws and wall mount bracket that

meet the VESA standard. Any damages or
injuries by misuse or using an improper
accessory are not covered by the
manufacturer’s warranty.

NOTE

y Use the screws that are listed on the VESA

standard screw specifications.

y The wall mount kit includes an installation

manual and necessary parts.

y The length of screws may differ depending

on the wall mount. Make sure to use the
proper length.

y For more information, refer to the manual

supplied with the wall mount bracket.

y The wall mount bracket is not provided. You

can obtain additional accessories from your
local dealer.

Tidying cables

47/55/60LM96

1 Gather and bind the cables with the cable

management.

2 Gather and bind the cables with the cable

holder on the TV back cover.

**

Cable management

Cable holder

CAUTION

y Do not move the TV by holding the cable

holder, as the cable holders may break, and
injuries and damage to the TV may occur.

ASSEMBLING AND PREPARING

23

84LM96

**

1 Gather and bind the cables with the cable

management.

Cable management

2 Install the cable holder as shown.

CAUTION

y Do not move the TV by holding the cable

holder, as the cable holders may break, and
injuries and damage to the TV may occur.

ENGLISH

ENG

Cable holder

3 Gather and bind the cables with the cable

holder.

MAKING CONNECTIONS

OUT

OPTICAL

DIGITAL

AUDIO

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

YPB

24

ENGLISH

ENG

MAKING
CONNECTIONS

This section on MAKING CONNECTIONS mainly
uses diagrams for the 47/55LM96** models.

Connect various external devices to the TV
and switch input modes to select an external
device. For more information on external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.

NOTE

yThe external device connection may differ

from the model.

yConnect external devices to the TV

regardless of the order of the TV port.

yIf you record a TV program on a DVD

recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.

yRefer to the external equipment’s manual for

operating instructions.

yIf you connect a gaming device to the TV,

use the cable supplied with the gaming
device.

yIn PC mode, there may be noise associated

with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.

yIn PC mode, some resolution settings may

not work properly depending on the graphics
card.

Antenna connection

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

ANTENNA / CABLE

NOTE

Use a signal splitter to use more than 2 TVs.

y

If the image quality is poor, install a signal

y

amplifier properly to improve the image quality.
If the image quality is poor with an antenna

y

connected, try to realign the antenna in the
correct direction.
An antenna cable and converter are not provided.

y

MAKING CONNECTIONS

1 2 3

HDD IN USB AppsUSB

USB IN

25

HDMI connection

Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.

Choose any HDMI input port to connect. It does
not matter which port you use.

(MHL)

/DVI IN

2 3 4

(ARC)

1

(*Not Provided)

NOTE

It is recommended to use the TV with the

y

HDMI connection for the best image quality.
Use the latest High Speed HDMI™ Cable

y

with CEC (Customer Electronics Control)
function.
High Speed HDMI™ Cables are tested to

y

carry an HD signal up to 1080p and higher.
Supported DTV Audio:

y

MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
Supported HDMI Audio format :

y

Dolby Digital, PCM (Up to 192 KHz,
32k/44.1k/48k /88k/96k/176k/192k, DTS Not
supported.)

ARC (Audio Return Channel)

An external audio device that supports

y

SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
When connected with a high-speed

y

HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.

ENG

ENGLISH

Blu-Ray / HD Cable Box /

HD STB / DVD / PC

MAKING CONNECTIONS

IN

OUT

OPTICAL

DIGITAL

AUDIO

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

COMPONENT

YPB

AUDIOAVPR

VIDEO

ANTENNA / CABLE

1 2 3

HDD IN USB AppsUSB

USB IN

1 2 3

HDD IN USB AppsUSB

USB IN

26

ENGLISH

ENG

DVI to HDMI connection

Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.

Choose any HDMI input port to connect. It does
not matter which port you use.

(MHL)

/DVI IN

2 3 4

(RGB/DVI)

AUDIO

(ARC)

1

MHL connection

Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.

(MHL)

/DVI IN

2 3 4

(ARC)

1

MHL passive cable

(*Not Provided)

(*Not Provided)

(*Not Provided)

Mobile phone

NOTE

Connect the mobile phone to the HDMI/DVI

y

IN 4 (MHL) port to view the phone screen on
the TV.
The MHL passive cable is needed to connect

y

the TV and a mobile phone.
This only works for the MHL-enabled phone.

y

Some applications can be operated by the

y

remote control.
For some mobile phones supporting MHL,

y

you can control with the magic remote
control.

Blu-Ray / HD Cable Box /

DVD / PC

NOTE

Depending on the graphics card, DOS mode

y

may not work if a HDMI to DVI Cable is in
use.

MAKING CONNECTIONS

RGB OUT (PC)

AUDIO OUT

IN

OUT

OPTICAL

DIGITAL

AUDIO

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

COMPONENT

YPB

AUDIOAVPR

VIDEO

ANTENNA / CABLE

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

OUT

OPTICAL

DIGITAL

AUDIO

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

COMPONENT

YPB

AUDIO

PR

ANTENNA / CABLE

VIDEO

AUDIO

L R

27

RGB-PC connection

Transmits the video signal from your PC to the
TV. To transmit an audio signal, connect an audio
cable.

RGB

(*Not

Provided)

(PC)

(RGB/DVI)

AUDIO

(*Not
Provided)

PC

Component connection

Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a component gender cable
as shown.

COMPONENT

AUDIOAVPR

VIDEO

YELLOW

(Use the

composite

video cable

provided.)

YELLOW

WHITE

RED

WHITE

RED

YPB

GREEN

(Use the

component

video cable

provided.)

BLUE BLUE

RED RED

GREEN GREEN

ENG

ENGLISH

HD Cable Box

(*Not Provided)

WHITE

RED

RED

Blu-Ray

DVD

NOTE

y If cables are not installed correctly, it could

cause this image to display in black and
white or with distorted colours.

BLUE

GREEN

MAKING CONNECTIONS

AUDIO

VIDEO

MONO

( )

L

R

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

OUT

OPTICAL

DIGITAL

AUDIO

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

IN

COMPONENT

YPB

AUDIO

PR

ANTENNA / CABLE

/DVI IN

1 2 31

(ARC)

2 3 4

HDD IN USB AppsUSB

(MHL)

USB IN

28

ENGLISH

ENG

Composite connection

Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a composite gender cable
as shown.

COMPONENT

VIDEO

YELLOW

AUDIOAVPR

YELLOW
(Use the composite video

cable provided.)

WHITE

YPB

RED

Audio connection

You may use an external audio system instead of
the built-in speaker.

NOTE

If you use an external audio device instead

y

of the built-in speaker, set the TV speaker
feature to off.

Digital optical audio connection

Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.

OUT

OPTICAL

DIGITAL

AUDIO

YELLOW YELLOW

WHITE

WHITE

Blu-Ray / HD Cable Box /

DVD / VCR

RED

(*Not Provided)

RED

(*Not Provided)

Digital Audio System

CAUTION

y Do not look into the optical output port.

Looking at the laser beam may damage your
vision.

y Audio with ACP (Audio Copy Protection)

function may block digital audio output.

MAKING CONNECTIONS

29

USB connection

Connect a USB storage device such as a USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.

USB IN

HDD IN USB AppsUSB

1 2 3

HDD

(*Not Provided)

NOTE

Some USB Hubs may not work. If a USB

y

device connected using a USB Hub is not
detected, connect it to the USB IN port on
the TV directly.

ENGLISH

ENG

USB Hub

(*Not Provided)

USB

(*Not Provided)

MAGIC REMOTE CONTROL FUNCTIONS

30

ENGLISH

ENG

MAGIC REMOTE CONTROL FUNCTIONS

When the message "Magic remote control battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure
to point the magic remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the magic remote control.

y

POINTER (RF Transmitter)

Voice Search

(Depending on model)

POWER

Turns the TV on or off.

BACK

Returns to the previous level.

Navigation Buttons

( UP DOWN LEFT RIGHT )

Scrolls through menus or options.

Wheel(OK)

Selects menus or options and
confirms your input. Scrolls through
the saved programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the magic remote control works as
a regular remote control. To display
the pointer again, shake the magic
remote control from side to side.

HOME

Accesses the HOME menu.

1

2

Adjusts the volume level.

Uses for viewing 3D video.

MY APPS

Shows the list of Apps.

Voice Search (Depending on model)
Network connection is required to use the voice search function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation
and speed) and the environment (noise and TV volume).

MUTE

Mutes all sounds.

Scrolls through the saved
programmes.

1 Select the Voice Search icon on the screen.
2 Speak slowly and precisely. When a voice is recognized, the processing message appears on the

screen.
Use the magic remote control no further than 15 cm from your face.

y

MAGIC REMOTE CONTROL FUNCTIONS

31

Registering magic remote
control

It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.

How to register the magic remote control

1 To register automatically, turn the

TV on and press the Wheel(OK)
button. When registration is com­pleted, the completion message
appears on the screen.

2 If registration fails, turn the TV

off and back on, then press the
Wheel(OK) button to complete
registration.

How to re-register the magic remote control

1 Press and hold the BACK and

HOME buttons together for 5

seconds to reset, then register it
by following “How to register the
magic remote control” above.

2 To re-register the magic remote

control, press and hold the
BACK button for 5 seconds
toward the TV.
When registration is completed,
the completion message appears
on the screen.

How to use magic remote
control

1 If the pointer disappears, move

the magic remote control slightly
to left or right. Then, it will auto­matically appear on the screen.
» If the pointer has not been

used for a certain period of
time, it will disappear.

2 You can move the pointer by

aiming the pointer receiver of
the magic remote control at your
TV then move it left, right, up or
down.
» If the pointer does not work

properly, leave the magic
remote control for 10 seconds
then use it again.

My Apps

If you press Wheel(OK) on the magic
remote control, the screen appears.
Shows information about the current
programme and screen.

Pressing this button will display number
keypad which you can select programme
number.

You can select My Apps Menu.

Precautions to take when
using the magic remote
control

Use the magic remote control within the maxi-

y

mum communication distance (10 m). Using
the magic remote control beyond this distance,
or with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to

y

nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the magic remote
control.
The magic remote control may be damaged or

y

may malfunction if it is dropped or receives a
heavy impact.
Take care not to bump into nearby furniture

y

or other people when using the magic remote
control.
Manufacturer and installer cannot provide

y

service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)

y

be located more than 1 m away from the TV. If
the AP is installed closer than 1 m, the magic
remote control may not perform as expected
due to frequency interference.

ENGLISH

ENG

REMOTE CONTROL

32

ENGLISH

ENG

REMOTE CONTROL

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure to
point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

y

In Analogue TV and some countries, some remote control buttons may not work.

y

POWER

Turns the TV on or off.

User Guide

Sees User Guide.

RATIO

Resizes an image.

INPUT

Changes the input source.

TV/RAD

Selects Radio, TV and DTV programme.

Number buttons

Enters numbers.

LIST

Accesses the saved programme list.

Q.VIEW

Returns to the previously viewed pro­gramme.

Adjusts the volume level.

FAV

Accesses your favourite programme list.

Uses for viewing 3D video.

MUTE

Mutes all sounds.

P
Scrolls through the saved programmes.

PAGE

Moves to the previous or next screen.

SETTINGS

Accesses the main menu.

HOME

Accesses the HOME menu.

MY APPS

Shows the list of Apps.

Navigation Buttons
( UP DOWN LEFT RIGHT )

Scrolls through menus or options.

RATIO

INPUT

1 2 3

4 5 6

7 809

LIST

FAV

MUTE

SETTINGS

HOME

OK

GUIDE

LIVE TV

ENERGY

INFO

SAVING

Q.VIEW

MY APPS

EXIT

SUBTITLE

Q.MENUT.OPTTEXT

REC

OK

Selects menus or options and confirms
your input.

TV /
RAD

BACK

Returns to the previous level.

GUIDE

Shows programme guide.

EXIT

Clears on-screen displays and return to
TV viewing.

Coloured buttons ( RED

GREEN YELLOW BLUE )

P
A
G

P

These access special functions in some

E

menus.

TELETEXT buttons ( TEXT T.OPT )

These buttons are used for teletext.

SUBTITLE

Recalls your preferred subtitle in digital
mode.

Q.MENU

Accesses the Quick menus.

LIVE TV

Return to the LIVE TV.

Control buttons ( )

Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK
or DVR).

REC

Uses to adjust DVR menu.

INFO

Views the information of the current
programme and screen.

ENERGY SAVING

Adjusts the brightness of the screen to
reduce energy consumption.

SIMPLINK

Accesses the AV devices connected with
the HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.

2

1

USING THE USER
GUIDE

User Guide allows you to more easily access the
detailed TV information.

1 Press HOME button to access the Home

menu.

2 Select User Guide and press Wheel(OK).

User Guide

PROGRAMME Setting

PICTURE, SOUND Setting

OPTION

LG SMART Function

Advanced Function

Information

USING THE USER GUIDE

To use input device

To use Energy Saving feature

To set time options

To set TV lock options

To set language

Disabled Assistance

To set Magic Remote Control

33

ENGLISH

ENG

PREMIUM

More...

My Apps

Input List Settings Live TV Search Internet 3D LG Smart World

Programme

Guide

User Guide

Recent List

User Guide

NOTE

You can also access the User Guide by

y

pressing (User Guide) button in the remote
control.

Shows the current watching programme or
input source screen.

Allows to select the category you want.
Allows to select the item you want.

You can use to move between pages.
Allows to browse the description of the

function you want from the index.

User Guide

PROGRAMME Setting

PICTURE, SOUND Setting

OPTION

LG SMART Function

Advanced Function

Information

HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.

Menu Language

Audio Language

OPTION > To set language

HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.

Menu Language

Selects a language for the display text.
[In Digital Mode Only]

Audio Language

When watching a digital broadcast containing several audio
languages, you can select the language you want.

[In Digital Mode Only]
Use the Subtitle function when two or more subtitle languages

Subtitle Language

are broadcast.

If subtitle data in a selected language is not broadcast, the

default language subtitle will be displayed.

Try Now Zoom In Close

Selects a language for the display text.
[In Digital Mode Only]
When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle languages

Subtitle

are broadcast.

Language

✎ If subtitle data in a selected language is not broadcast, the

default language subtitle will be displayed.

Try Now Zoom Out Close

Shows the description of the selected menu.
You can use to move between pages.

Moves to the selected menu directly from the
User Guide.

Zooms in or out the screen.

ENGLISH

ENG

MAINTENANCE / TROUBLESHOOTING

34

MAINTENANCE

Cleaning Your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.

CAUTION

y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall

outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

CAUTION

y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in

scratches on the screen and image distortions.

y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or

malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Problem Solution

Cannot control the TV
with the remote control.

No image display and
no sound is produced.

The TV turns off
suddenly.

When connecting to the
PC (RGB/HDMI DVI),
‘No signal’ or ‘Invalid
Format’ is displayed.

y Check the remote control sensor on the product and try again.
y Check if there is any obstacle between the product and the remote control.
y Check if the batteries are still working and properly installed ( to , to ).

y Check if the product is turned on.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.

y Check the power control settings. The power supply may be interrupted.
y Check if the Auto sleep feature is activated in the Time settings.
y If there is no signal while the TV is on, the TV will turn off automatically after

15 minutes of inactivity.

y Turn the TV off/on using the remote control.
y Reconnect the RGB/HDMI cable.
y Restart the PC with the TV on.

SPECIFICATIONS

SPECIFICATIONS

Product specifications may be changed without prior notice due to upgrade of product functions.

Wireless LAN module(WN8122E) specification

Standard IEEE802.11a/b/g/n

2400 to 2483.5 MHz

Frequency Range

Modulation CCK / OFDM / MIMO

Output Power
(Typical)

Data rate

Antenna Gain
(Typical)

Occupied bandwidth

y Because band channel used by the country could be different, the user can not change or adjust the

operating frequency and this product is set for the regional frequency table.

5150 to 5250 MHz
5725 to 5850 MHz

802.11a: 14 dBm

802.11b: 17 dBm

802.11g: 15 dBm

802.11n - 2.4GHz: 13.5 dBm

802.11n - 5GHz: 12 dBm

802.11a/g: 54 Mbps

802.11b: 11 Mbps

802.11n: 300 Mbps

2400 to 2483.5 MHz: -0.79dBi

5150 to 5250 MHz: 0.62dBi
5725 to 5850 MHz: 0.52dBi

802.11a/b/g: HT20

802.11n: HT20/40

35

ENGLISH

ENG

Bluetooth module (BM-LDS302) specification

Standard Bluetooth Version 3.0

Frequency Range 2400 ~ 2483.5 MHz

Output Power (Max.) 10 dBm or lower

Data rate (Max.) 3 Mbps

Communication Distance Line of Open Sight approx. 10 m

SPECIFICATIONS

36

ENGLISH

ENG

MODEL

Dimensions
(W x H x D)

Weight

Power requirement AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz

Dimensions
(W x H x D)

Weight

Power requirement AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz

For the power supply and power consumption, refer to the label attached to the product.

Environment
condition

With stand (mm) 1053.0 x 687.0 x 264.0 1223.0 x 784.0 x 331.0
Without stand (mm) 1053.0 x 612.0 x 37.9 1223.0 x 708.0 x 38.4
With stand (kg) 17.6 24.2
Without stand (kg) 15.3 20.6

MODEL

With stand (mm) 1346.0 x 862.0 x 331.0 1916.0 x 1214.0 x 399.0
Without stand (mm) 1346.0 x 784.0 x 41.2 1916.0 x 1120.0 x 39.9
With stand (kg) 31.5 81.7
Without stand (kg) 27.9 70.4

Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %

47LM9600-TA / 47LM960Y-TA 55LM9600-TA / 55LM960Y-TA

60LM9600-TA / 60LM960Y-TA 84LM9600-TA / 84LM960Y-TA

47LM96

60LM96

**

**

55LM96

84LM96

**

**

SPECIFICATIONS

37

New Zealand,
Singapore

Australia

Indonesia,
Israel,
Myanmar,
Sri Lanka

Vietnam,
Malaysia

Iran,
Algeria,
Tunisia,
Digital model

Analogue model,
India,
Thailand,
South Africa,

--

Digital TV Analogue TV

Television System DVB-T PAL/SECAM-B/G/D/K, PAL-I

Programme
Coverage

Television System DVB-T PAL B/B
Programme

Coverage

Television System DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M

Programme
Coverage

Television System DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M

Programme
Coverage

Television System DVB-T PAL/SECAM-B/G/D/K, PAL-I, NTSC-M

Programme
Coverage

Television System - PAL/SECAM-B/G/D/K, PAL-I, NTSC-M

Programme
Coverage

External Antenna
Impedance

UHF 21 to 69

VHF 06 to 12,

UHF 27 to 69

UHF 21 to 69

VHF 6 to 12,

UHF 21 to 69

VHF 5 to 12,

UHF 21 to 69

-

75 Ω 75 Ω

BG : VHF/UHF 1 to 69, CATV 01 to 47

I : VHF/UHF 1 to 69, CATV 01 to 47

DK : VHF/UHF 1 to 69, CATV 01 to 47

B/B : VHF/UHF 0 to 75, CATV : 2 to 44

BG : VHF/UHF 1 to 69, CATV 01 to 47

I : VHF/UHF 1 to 69, CATV 01 to 47

DK : VHF/UHF 1 to 69, CATV 01 to 47

M : VHF/UHF 2 to 78, CATV 01 to 71

BG : VHF/UHF 1 to 69, CATV 01 to 47

I : VHF/UHF 1 to 69, CATV 01 to 47

DK : VHF/UHF 1 to 69, CATV 01 to 47

M : VHF/UHF 2 to 78, CATV 01 to 71

BG : VHF/UHF 1 to 69, CATV 01 to 47

I : VHF/UHF 1 to 69, CATV 01 to 47

DK : VHF/UHF 1 to 69, CATV 01 to 47

M : VHF/UHF 2 to 78, CATV 01 to 71

BG : VHF/UHF 1 to 69, CATV 01 to 47

I : VHF/UHF 1 to 69, CATV 01 to 47

DK : VHF/UHF 1 to 69, CATV 01 to 47

M : VHF/UHF 2 to 78, CATV 01 to 71

ENGLISH

ENG

SPECIFICATIONS

38

ENGLISH

ENG

HDMI/DVI-DTV supported mode Component port connecting information

Component

ports on the TV

Y P

Y P

Video output

ports on DVD

player

Y B-Y R-Y
Y Cb Cr
Y Pb Pr

Signal Component

480i/576i O

480p/576p O

720p/1080i O

1080p

(50 Hz / 60 Hz only)

B

B

O

Resolution

Horizontal

Frequency

Vertical

Frequency

(kHz)

720x480

31.469 59.94

31.5 60

720x576 31.25 50

37.5 50

1280x720

44.96 59.94
45 60

33.72 59.94

33.75 60

28.125 50

26.97 23.97

1920x1080

27 24

33.716 29.976

(Hz)

33.75 30.00

56.25 50

67.43 59.94

67.5 60

53.95 23.976
54 24.00

3840x2160

(Only 84LM96**)

56.25 25

61.43 29.970

67.5 30.00

P

R

P

R

SPECIFICATIONS

3D supported mode

y Video, which is input as below media contents is switched into the 3D screen automatically.

3D supported mode automatically

Input Signal

640x480

480p

576p

720p

HDMI

1080i

1080p

Horizontal

Frequency

(kHz)

31.469 / 31.5

62.938 / 63 Frame Packing, Line Alternative

31.469 / 31.5

62.938 / 63 Frame Packing, Line Alternative

31.25

62.5 Frame Packing, Line Alternative

37.50 50

44.96 / 45 59.94 / 60
75 50

89.91 / 90 59.94 / 60

28.125 50

33.72 / 33.75 59.94 / 60

56.25 50

67.50 59.94 / 60

26.97 / 27 23.97 / 24

28.125 25

33.72 / 33.75 29.976 / 30

43.94 / 54 23.97 / 24

67.432 / 67.5 29.976 / 30

56.25 50

67.432 / 67.5 59.94 / 60

Vertical

Frequency

(Hz)

59.94 / 60

50

Playable 3D video format

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Frame packing, Line Alternative

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Frame packing, Field Alternative

Side by Side(Half), Top & Bottom,

Side by Side(Full)

Frame packing, Line Alternative56.25 25

Side by Side(Half), Top & Bottom

39

ENGLISH

ENG

USB 1080p 33.75 30

DLNA 1080p 33.75 30

Side by Side(Half), Top & Bottom,

Checker Board, MPO(Photo),

JPS(Photo)

SPECIFICATIONS

40

y For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.

ENGLISH

ENG

Input Signal

HDMI-DTV

(Only 84LM96**)

HDMI-PC

RGB-PC

Component

1920x1080 67.50

1920x1080 67.50

3D supported mode manually

Horizontal

Frequency

(kHz)

37.50 50 2D to 3D, Side by Side(Half),

720p

1080i

1080p

Others

1024x768 48.36
1360x768 47.71

Others - - 2D to 3D
1024x768 48.36
1360x768

Others - - 2D to 3D

720p

1080i

1080p

Others - - 2D to 3D

28.12 50

33.75 60

27.00 24

28.12 25

33.75 30

56.25 50

67.50 60

- - 2D to 3D

47.71

37.50 50

45.00 60

28.12 50

33.75 60

27.00 24

28.12 25

33.75 30

56.25 50

67.50 60

Vertical

Frequency

(Hz)

60

60

Playable 3D video format

Top & Bottom,

Single Frame Sequential45.00 60

2D to 3D, Side by Side(Half),

Top & Bottom

2D to 3D, Side by Side(Half),

Top & Bottom, Checker Board

2D to 3D, Side by Side(Half),

Top & Bottom, Checker Board,

Single Frame Sequential,

Row Interleaving, Column Interleaving

2D to 3D, Side by Side(Half),

Top & Bottom

2D to 3D, Side by Side(Half),

Top & Bottom, Checker Board,

Single Frame Sequential,

Row Interleaving, Column Interleaving

2D to 3D, Side by Side(Half),

Top & Bottom

2D to 3D, Side by Side(Half),

Top & Bottom

USB 1080p 33.75 30

DLNA 1080p 33.75 30

Signal Playable 3D video format

DTV

HD

SD 2D to 3D

2D to 3D, Side by Side(Half),

Top & Bottom, Checker Board,

Row Interleaving, Column Interleaving

[Photo : Side by Side(Half),

Top & Bottom]

2D to 3D, Side by Side(Half),

Top & Bottom

For any suggestion, opinion, complaints,
please call
800 54 in UAE
0800 54 54 54 in South Africa
080 100 54 54 in Morocco
19960 in Egypt.
Other countries, please contact our local
dealer or log into http://www.lg.com

Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.

MODEL

SERIAL

(Only DTV)