LG 47LM860W User Manual

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

LM96**

LM95**

LM86**

P/NO : MFL67441715 (1205-REV01)	www.lg.com
Printed in Korea

A-2 TABLE OF CONTENTS

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-7 Tidying cables

language list

English

Svenska

Norsk

Dansk

Suomi

B-1 MAKING CONNECTIONS

B-1 Antenna connection

B-2 Satellite connection

B-2 HDMI connection

-ARC (Audio Return Channel) B-4 DVI to HDMI connection

B-6 MHL connection B-7 RGB-PC connection

B-8 Component connection B-9 Composite connection B-10 Euro scart connection B-13 Audio connection

-Digital optical audio connection B-15 USB connection

B-16 CI module connection B-17 Headphone connection

B-22 SPECIFICATIONS

COMMON

LANGUAGE

COMMON

SETTING UP THE TV A-3

SETTING UP THE TV

Image shown may differ from your TV.

Attaching the stand

47/55LM96**

1

Stand body

4 EA M4 x 20

Front

Stand base

Top View

2

Stand rear cover

3

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

4

4 EA

M4 x 20

CAUTION

yyMake sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.

yyDo not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

A-4 SETTING UP THE TV

42/47/55LM86**

1

3

Stand body

4 EA M4 x 20

Front

Stand base

Top View

2

Stand rear cover

Wrapping bag

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

4

SETTING UP THE TV A-5

5

6

4 EA

M4 x 20

Protection pad

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

CAUTION

yyMake sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.

yyDo not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

A-6 SETTING UP THE TV

72LM95**

1		4 EA	4
		M5 x 35	4 EA
	Stand body
			M4 x 20
		Front

Stand base

Top View

2

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

3Stand rear cover

CAUTION

yyMake sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.

yyDo not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

SETTING UP THE TV A-7

Tidying cables

47/55LM96**, 42/47/55LM86** 72LM95**

1 Gather the cables with the stand rear cover.

Stand rear cover

2 Install the cable holder as shown.

1 Install the cable holder as shown.

Cable holder

		2	Gather and bind the cables with the cable
			holder.
	Cable holder
3	Gather and bind the cables with the cable	3	Pull the cable management on the stand rear

holder.	cover and organize cables. Then, put it back.

Cable management

CAUTION

yyDo not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur.

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

www.lg.com

ENGLISH

2 TABLE OF CONTENTS

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 SAFETY INSTRUCTIONS

10 Viewing 3D Imaging

12 INSTALLATION PROCEDURE

12 ASSEMBLING AND PREPARING

12 Unpacking

16Separate purchase

17Parts and buttons

18Lifting and moving the TV

19Mounting on a table

20Mounting on a wall

21MAGIC REMOTE CONTORLFUNCTIONS

22Registering magic remote control

22 How to use magic remote control

22Precautions to take when using the magic remote control

23REMOTE CONTORL

24USING THE USER GUIDE

25MAINTENANCE

25 Cleaning Your TV

25 - Screen, frame, cabinet and stand

25 - Power cord

25 TROUBLESHOOTING

26 SPECIFICATIONS

warning

yyIf you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yyIf you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yyThe note helps you understand and use the product safely. Please read the note carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE 3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

ENGLISH

ENGLISH

4 SAFETY INSTrUCTIONS

SAFETY INSTrUCTIONS

Please read these safety precautions carefully before using the product.

wArNING

yyDo not place the TV and remote control in the following environments:

» A location exposed to direct sunlight

» An area with high humidity such as a bathroom

» Near any heat source such as stoves and other devices that produce heat

»Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

»An area exposed to rain or wind

»Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust. This may cause a fire hazard.

yyMains plug is the disconnecting device. The plug must remain readily operable.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or

covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect the power cable to the grounded current. (Except for devices which are not grounded.)

You may be electrocuted or injured.

yyFix the power cable completely.

If the power cable is not fixed completely, a fire can break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

SAFETY INSTrUCTIONS 5

wArNING

yyWhen mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.

It may cause fire, electric shock.

yyDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause

Desiccant	suffocation. Keep it out of the reach of children.

yyDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to protect a child from eating them. Please seek DoctorMedical Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/ screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted. (Depending on model)

yyDo not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.

You may be injured or the product can be damaged.

ENGLISH

ENGLISH

6 SAFETY INSTRUCTIONS

warning

yyNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yyDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.

Contact the service center for check, calibration or repair.

yyIf any of the following occur, unplug the product immediately and contact your local service centre.

» The product has been impacted by shock

»The product has been damaged

»Foreign objects have entered the product

»The product produced smoke or a strange smell This may result in fire or electric shock.

yyIf you don’t intend to use the product for a long time, unplug the power cable from the product.

Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

yyInstall the product where no radio wave occurs.

yyThere should be enough distance between an outside antenna and power lines to

keep the former from touching the latter even when the antenna falls. This may cause an electric shock.

yyDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

SAFETY INSTRUCTIONS 7

CAUTION

yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yyOnly use the attachments / accessories specified by the manufacturer.

yyWhen installing the antenna, consult a qualified service man. This may create a fire hazard or an electric shock hazard.

yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

yyOnly use the specified type of battery.

This could cause damage to the remote control.

yyDo not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

yyMake sure there are no objects between the remote control and its sensor.

yySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room.

yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

yyDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

yyPlease follow the installation instructions below to prevent the product from overheating.

» The distance between the product and the wall should be more than 10 cm.

» Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

»Do not install the product on a carpet or cushion.

»Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.

ENGLISH

ENGLISH

8 SAFETY INSTRUCTIONS

CAUTION

yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.

yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.

yyAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

yyWhen cleaning the product and its components, unplug the power first and wipe it

with a soft cloth. Applying excessive force may cause scratches or discolouration.

Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or

industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

yyWhen unplugging the cable, grab the plug and unplug it.

If the wires inside the power cable are disconnected, this may cause fire.

yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

yyWhen moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury.

SAFETY INSTRUCTIONS 9

CAUTION

yyContact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and

does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen,

resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

ENGLISH

ENGLISH

10 SAFETY INSTRUCTIONS

Viewing 3D Imaging

arning

Viewing Environment

yyViewing Time

When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yyDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yyIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yyIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yyDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yyWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

» Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

SAFETY INSTRUCTIONS 11

CAUTION

Viewing Environment

yyViewing Distance

Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yyInfants/Children

Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yyTeenagers

Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yyElderly

The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yyMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. yyDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. yyUsing modified 3D glasses may cause eye strain or image distortion.

yyDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. yyThe 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when

wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ENGLISH

ENGLISH

12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yyImage shown may differ from your TV.

yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future.

yyThe TV can be placed in standby mode in order to reduce the power consumption.And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product.

The illustrations in this manual may differ from the actual product and item.

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span. yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

B	B
A	A
A	10 mm
B	18 mm

ASSEMBLING AND PREPARING 13

P

Owner’s manual

Magic remote control,

Remote control,

batteries (AA)

batteries (AAA)

(See p.21)

(See p.23)

Composite video cable		Component video cable		Scart gender cable
(See p.B-8, B-9)		(See p.B-8)		(See p.B-10)

Cinema 3D glasses		Dual play glasses		Polishing cloth
The number of 3D glasses		(Depending on model)		(Depending on model)
may differ depending on the				Use this to remove dust from
model or country.				the cabinet.

or

Isolator

(Depending on model) (See p.15)

ENGLISH

ENGLISH

14 ASSEMBLING AND PREPARING

Only 47/55LM96**, 42/47/55LM86**

Stand rear cover		Stand body		Stand base
(See p.A-3, A-4)		(See p.A-3, A-4)		(See p.A-3, A-4)

Stand screws	Cable holder
8 EA, M4 x 20	2 EA
(See p.A-3, A-4)	(See p.A-7)
Only 72LM95**

Stand rear cover		Stand body		Stand base
(See p.A-6)		(See p.A-6)		(See p.A-6)

Stand screws		Cable holder		Power cord
4 EA, M4 x 20 / 4 EA, M5 x 35		2 EA
(See p.A-6)		(See p.A-7)

Wireless LAN

ASSEMBLING AND PREPARING 15

CAUTION

yyIf there is a Isolator, follow as shown.

»Use this to install TV in a place where there is a voltage difference between TV set and GND of antenna signal. If there is a voltage difference between TV set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident.

»You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

»Before starting, be sure that the TV antenna is connected.

Connect to TV.

Wall

ANTENNA/

or

Cable / Antenna

Isolator

Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

ENGLISH

ENGLISH

16 ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items.

These devices only work with certain models.

P

AN-MR300		AG-F2**, AG-F3**		AG-F2**DP, AG-F3**DP
Magic remote control		Cinema 3D glasses		Dual play glasses

AN-WF100

Wireless LAN

Compatibility	47/55LM96**	72LM95**	42/47/55LM86**
AN-MR300	•	•	•
Magic remote control
AG-F2**, AG-F3**	•	•	•
Cinema 3D glasses
AG-F2**DP, AG-F3**DP	•	•	•
Dual play glasses
AN-WF100		•
Wireless LAN

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

ASSEMBLING AND PREPARING 17

Parts and buttons

47/55LM96**, 42/47/55LM86** Screen

	OK
	SETTINGS	S
	INPUT
Speakers	Buttons

Remote control and	Only 42/47/55LM86**: LG Logo Light
intelligent sensors1
Power Indicator	72LM95**
	Screen

ENGLISH

OK

SETTINGS

INPUT

	Speakers	Buttons
	Remote control and
	intelligent sensors1
	Power Indicator
Button	Description
	Scrolls through the saved programmes.
	Adjusts the volume level.
	Selects the highlighted menu option or confirms an input.
	Accesses the main menu, or saves your input and exits the menus.
	Changes the input source.
	Turns the power on or off.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

yyYou can set the power indicator light to on or off by selecting OPTION in the main menus.

ENGLISH

18 ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in.

yyBefore moving or lifting the TV, disconnect the power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yyWhen transporting a large TV, there should be at least 2 people.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

yyWhenever you handle TV, Protection pad should be covered with side of TV. (Depending on model)

Protection pad

	ASSEMBLING AND PREPARING 19
Mounting on a table	Securing the TV to a wall
1 Lift and tilt the TV into its upright position on a	This feature is not available for all models.
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.

	10 cm
	cm
10 cm	10
	10 cm
2 Connect the power cord to a wall outlet.		1 Insert and tighten the eye-bolts, or TV brackets
		and bolts on the back of the TV.
CAUTION		- If there are bolts inserted at the eye-bolts
		position, remove the bolts first.

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

Adjusting the angle of the TV to suit view

Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

20˚

20˚

CAUTION

yyWhen adjusting the angle of the product, watch out for your fingers.

Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

2Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the surface.

CAUTION

sure that children do not climb on or hang on the TV.

NOTE

a platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

ENGLISH

ENGLISH

20 ASSEMBLING AND PREPARING

Mounting on a wall

Attach a wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel.

LG recommends that wall mounting be performed by a qualified professional installer.

10 cm

10 cm 10 cm

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Wall mount bracket

Model	47/55LM96**	72LM95**
VESA (A x B)	42/47/55LM86**	600 x 400
	400 x 400
Standard	M6	M8
screw
Number of	4	4
screws
Wall mount	LSW400BX	LSW600B
bracket
	LSW420BX

A

B

CAUTION

yyDisconnect the power first, and then move or install the TV. Otherwise electric shock may occur.

yyIf you install the TV on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount bracket and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.

yyUse the screws and wall mount bracket that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe length of screws may differ depending on the wall mount. Make sure to use the proper length.

yyFor more information, refer to the manual supplied with the wall mount bracket.

yyThe wall mount bracket is not provided. You can obtain additional accessories from your local dealer.

(Depending on model)

yyIn order to protect the TV screen(scratch, fingerprint), put TV on flat table without removing wrapping bag.

yyAfter removing the wrapping bag on the back of the TV, install TV according to manual included in wall mounting bracket product. yyRemove protection pads after installing TV.

MAGIC REMOTE CONTORL FUNCTIONS 21

MAGIC REMOTE CONTORL FUNCTIONS

When the message "Magic remote control battery is low. Change the battery." is	1
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure	2
to point the magic remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.

CAUTION

yyDo not mix old and new batteries, as this may damage the magic remote control.

	POINTER (RF Transmitter)
						Voice Search
						(Depending on model)
			POWER
	Turns the TV on or off.
				BACK		HOME
	Returns to the previous level.					Accesses the HOME menu.
	(		Navigation Buttons			Wheel(OK)
		UP	DOWN	LEFT	RIGHT )
						Selects menus or options and
		Scrolls through menus or options.
						confirms your input. Scrolls through
						the saved programmes.
						If you press the navigation button
						while moving the pointer on the
						screen, the pointer disappears, and
						the magic remote control works as
						a regular remote control. To display
						the pointer again, shake the magic
						remote control from side to side.

Uses for viewing 3D video.

MY APPS

Shows the list of Apps.

Adjusts the volume level.

MUTE

Mutes all sounds.

Scrolls through the saved programmes.

Voice Search (Depending on model)

Network connection is required to use the voice search function.

The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).

1 Select the Voice Search icon on the screen.

2Speak slowly and precisely. When a voice is recognized, the processing message appears on the screen.

ENGLISH

yyUse the magic remote control no further than 15 cm from your face.

ENGLISH

22 MAGIC REMOTE CONTORL FUNCTIONS

Registering magic remote control

It is necessary to ‘pair’ (register) the magic remote control to your TV before it will work.

How to register the magic remote control

1To register automatically, turn the TV on and press the Wheel(OK) button. When registration is com-

pleted, the completion message appears on the screen.

2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration.

How to re-register the magic remote control

1 Press and hold the BACK and HOME buttons together for 5 seconds to reset, then register it by following “How to register the magic remote control” above.

2 To re-register the magic remote control, press and hold the BACK button for 5 seconds toward the TV.

When registration is completed, the completion message appears on the screen.

How to use magic remote control

1If the pointer disappears, move the magic remote control slightly to left or right. Then, it will automatically appear on the screen.

» If the pointer has not been used for a certain period of time, it will disappear.

2 You can move the pointer by aiming the pointer receiver of the magic remote control at your TV then move it left, right, up or down.

»If the pointer does not work properly, leave the magic remote control for 10 seconds then use it again.

My Apps

If you press Wheel(OK) on the magic remote control, the screen appears. Shows information about the current programme and screen.

Pressing this button will display number keypad which you can select programme

number.

You can select My Apps Menu.

Precautions to take when using the magic remote control

yyUse the magic remote control within the maximum communication distance (10 m). Using the magic remote control beyond this distance, or with an object obstructing it, may cause a communication failure.

yyAcommunication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the magic remote control.

yyThe magic remote control may be damaged or may malfunction if it is dropped or receives a heavy impact.

yyTake care not to bump into nearby furniture or other people when using the magic remote control.

yyManufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference.

yyIt is recommended that anAccess Point (AP) be located more than 1 m away from the TV. If theAP is installed closer than 1 m, the magic remote control may not perform as expected due to frequency interference.