LG 47LM6700-TA, 32LM6200 Owner’s Manual
|
User’s Guide Specification |
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. Model Description |
|
|
|
|
|
YJ JEON |
HJ SHIN |
JO KIM |
|||||
|
|
|
|
|
12.01.19 |
12.01.19 |
12.01.19 |
||||||
|
MODEL |
|
42LM6700-TA |
|
BRAND |
|
LG |
|
|
|
|
|
|
|
|
|
|
|
Part No. |
MFL67441723 |
|||||||
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
||||
|
SUFFIX |
|
STRWLJL |
|
Product Name |
|
42LM6700 |
|
|
|
(1201-REV00) |
||
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Printing Specification
1.Trim Size (Format) : 1 mm x 2 mm RU PP
2.Printing Colors
Cover : 1 COLOR (BLACK)
Inside : 1 COLOR (BLACK)
3.Stock (Paper)PDSOLWKR JUDGH XQGHU WROHUDQFH RI RU *60 Cover : Uncoated paper , 80 g/
Inside : Uncoated paper , 80 g/
4.Printing Method : Off-set
5.Bindery : Saddle stitch
6.Language : English(1)
7.Number of pages : 48
N |
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, |
Details should be followed Eco-SCM management standard[LG(56)-A-2524]. |
|
O |
Especially, Part should be followed and controlled the following specification. |
T(1)Eco-hazardous substances test report should be submitted
|
|
E |
when Part certification test and First Mass Production. |
||
|
|
S |
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink. |
||
|
|
|
|
|
|
3. |
Special Instructions |
|
|
||
|
|
|
|
|
|
|
|
|
(1) Origin Notification |
|
|
|
|
|
* LGEIN : Printed in Indonesia |
* LGEWA : Printed in U.K. |
|
|
|
|
* LGESP : Printed in Brazil |
* LGEMX : Printed in Mexico |
|
|
|
|
|
|
|
|
|
|
* LGEND : Printed in China |
* LGEIL : Printed in India |
|
*LGEMA : Printed in Poland
4.Changes
10
9
8
7
6
5
4
2
1
REVNO.. MM/DD/YY SIGNATURE CHANGE NO. |
CHANGE CONTENTS |
Pagination sheet
P/NO. MFL67441723
Total pages : 44 pages
2 |
… |
… |
42 |
Blank |
|
|
|
|
|
OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
LM62**
LM64**
LM66**
LM67**
LM76**
P/NO : MFL67441723 (1201-REV00) |
www.lg.com |
,62/$725 *8,'( 1
127(
Isolator Usage (Safety Caution)
$QWHQQ ,VRO WRU ,QVW OO WLRQ *XLGH
1. Always use isolator with RF signal port (In wall RF port or in set RF Port).
2.Isolator will protect if there is any voltage difference between GND of power Board and GND of Antenna Signal, the Antenna contact might be heated and excessive heat might cause an accident, therefore Isolator installation is highly recommended.
3.Avoid disconnecting the antenna isolator after installation.
4.When applying RF isolator, a slight loss of signal sensitivity can occur.
5.You can improve safety of TV by efficiently removing power voltage from TV
antenna.
$QWHQQ ,VRO WRU ,QVW OO WLRQ 0HWKRG
,VRO WRU &RQQHFWLRQ 0HWKRG |
|
: OO |
&RQQHFW WR 79 |
|
|
ANTENNA/ |
RU |
CABLE IN |
|
& OH $QWHQQ
,VRO WRU
&RQQHFW WR 6HW 7RS R[ &RQQHFW RQH HQG RI WKH LVRO WRU WR F OH QWHQQ M FN QG WKH RWKHU WR 79 VHW RU VHW WRS R[
*Above Pictures may differ from the actual.
127(
"Equipment connected to the protective earthing of mains connection of the building, or through other protective earthing to a cable distribution system using coaxial cable, may create fire hazard in some
circumstances. Connection to a cable distribution system has therefore to be provided through a device
providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)"
<![endif]>(1*/,6+ENG
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE Of CONTENTS
3 LICENSES
3OPEN SOURCE SOfTWARE NOTICE
4SAfETy INSTRUCTIONS
10 - Viewing 3D Imaging (Only 3D models)
12 INSTALLATION PROCEdURE
12 ASSEMBLING ANd PREPARING
12 Unpacking
15Separate purchase
16Parts and buttons
17Lifting and moving the TV
18Setting up the TV
18 - Attaching the stand
21 Mounting on a table
23Mounting on a wall
24Tidying cables
25MAKING CONNECTIONS
25Antenna connection
26HDMI connection
27DVI to HDMI connection
27RGB-PC connection
28Component connection
28Composite connection
29Audio connection
29- Digital optical audio connection
29USB connection
30REMOTE CONTROL
31MAGIC REMOTE CONTROL fUNCTIONS
32Registering Magic Remote Control
32How to use Magic Remote Control
32Precautions to Take when Using the Magic Remote Control
33USING THE USER GUIdE
34 MAINTENANCE
34 Cleaning your TV
34 - Screen, frame, cabinet and stand
34 - Power cord
34TROUBLESHOOTING
35ENvIRONMENTAL INfORMATION
35WEEE
36SPECIfICATIONS
WARNING
yIf you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yIf you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yThe note helps you to understand and use the product safely. Please read the note carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 3
Licenses
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 SAFETY INSTRUCTIONS
Safety Instructions
Please read these safety precautions carefully before using the product.
WARNING
y yDo not place the TV and remote control in the following environments: - -A location exposed to direct sunlight
- -An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
y yDo not place the product where it might be exposed to dust. This may cause a fire hazard.
y yMains plug is the disconnecting device. The plug must remain readily operable.
y yDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y yMake sure to connect the power cable to the grounded current. (Except for devices which are not grounded.)
You may be electrocuted or injured.
y yFix the power cable completely.
If the power cable is not fixed completely, a fire can break out.
y yEnsure the power cord does not come into contact with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
y yDo not place a heavy object, or the product itself, on power cables. Otherwise, this may result in fire or electric shock.
y yBend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
y yWhen mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.
It may cause fire, electric shock.
Desiccant
SAFETY INSTRUCTIONS 5
yDo not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.
yDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
yKeep the packing anti-moisture material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yDispose of used batteries carefully to protect a child from eating them. In case if they eat it, take them to consult a doctor immediately.
yDo not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
yDo not put or store inflammable substances near the product.
There is a danger of explosion or fire due to careless handling of the inflammable substances.
yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
yDo not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.
yDo not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.
You may be injured or the product can be damaged.
yNever touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
yNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 SAFETY INSTRUCTIONS
y yDo not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
y yIf any of the following occur, unplug the product immediately and contact your local service centre.
- -The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell This may result in fire or electric shock.
y yIf you don’t intend to use the product for a long time, unplug the power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
y yApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS 7
CAUTION
y yInstall the product where no radio wave occurs.
y yThere should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
y yDo not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
y yIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
y yIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
y yOnly use the attachments / accessories specified by the manufacturer.
y yWhen installing the antenna, consult a qualified service man. This may create a fire hazard or an electric shock hazard.
5~7 times
y yWe recommend that you maintain a distance of at least 5 to 7 times the diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
y yOnly use the specified type of battery.
This could cause damage to the remote control.
y yDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
y yMake sure there are no objects between the remote control and its sensor.
y ySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room.
y yWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 SAFETY INSTRUCTIONS
y yDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
y yPlease follow the installation instructions below to prevent the product from overheating.
- -The distance between the product and the wall should be more than 10 cm.
- -Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
acupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
y yTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.
y yPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
y yPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
y yProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
y yDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
y yAvoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
y yWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
y yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
y yWhen unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause fire.
y yWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
SAFETY INSTRUCTIONS 9
y yWhen moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
y yContact the service center once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure.
y yRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
y yIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
y yThe panel is a high technology TFT product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y yYou may find different brightness and color of the panel depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
y yDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y yGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 SAFETY INSTRUCTIONS
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS 11
CAUTION
viewing Environment
yViewing Distance
-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.
viewing Age
yInfants/Children
-Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.)
-Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
yTeenagers
-Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yElderly
-The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the recommended distance.
Cautions when using the 3d glasses
yMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yUsing modified 3D glasses may cause eye strain or image distortion.
yDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yThe 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
<![endif]>ENGLISH
Loading...