LG 47LG60FR Owner's Manual

Please read this manual carefully before operating your set.

Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

LCD TV PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

32LG60UR 32LG70UR 42LG60FR 47LG60FR

PLASMA TV MODELS

42PG60UR 50PG60UR 50PG70FR 60PG70FR

P/NO : MFL41469209 (0805-REV04)

www.lge.com

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 1

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 2

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 1

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.

When mounting a TV it on the wall, make sure not to install TV by the hanging power and signal cables on the back of the TV.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 2

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Never touch this apparatus or antenna during a thunder or lighting storm.

Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Outdoor use marking : WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain or moisture.

Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.

GGRROOUUNNDD IINNGG Ensure that you connect the earth ground wire

to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The

plug must remain readily operable.

Keep the product away from direct sunlight.

- The product can be damaged.

Power Supply

Short-circuit

Breaker

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 3

CONTENTS

WARNING/CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 2

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cable Management

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Securing the TV to the wall fall over.

. . . . . . . . . . . . . . . . . 18

Protection Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Wall Mount: Horizontal Installation

. . . . . . . . . . . . . . . . . . . 20

Attaching The TV To a Desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Antenna Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

USB In Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

External Stereo Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

AV Out Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

WATCHING TV / CHANNEL CONTROL

Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . 40

Turning On TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Quick Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Channel Search

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Auto Turning

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Manual Turning:Adding / Deleting Channels

. . . . 46

Fine Tuning Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Booster

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Favorite Channels Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

SimpLink

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

USB

To use the USB device.................................................................................... 54

Photo list

................................................................................................................................. 55

Music list................................................................................................................................. 57

Movie List

............................................................................................................................... 59

Divx Registration Code................................................................................... 60

PICTURE CONTROL

Watching PIP(Picture-In-Picture) . . . . . . . . . . . . . . . . . . . . . . 61

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . . 62

Preset Picture Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

- Picture Mode- Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

- Auto Color Tone Control(Warm/Medium/Cool)

. . 64

Manual Picture Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

- Picture Mode- User Mode

. . . . . . . . . . . . . . . . . . . . . . . . . 65

- Color Tone - User Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . 66

XD - Picture Improvement Technology

. . . . . . . . . . . . . 67

Advanced - Gamma

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Advanced - Film Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Advanced - Black (Darkness) Level

. . . . . . . . . . . . . . . . . . . 71

Advanced - Eye Care

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Power Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Image Sticking Minimization (ISM) Method

. . . . . . . 75

Power Saving Picture Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Factory Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 4

SOUND & LANGUAGE CONTROL

Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Preset Sound Setting - Sound Mode

. . . . . . . . . . . . . . . . 79

Sound Setting Adjustment - User Mode

. . . . . . . . . . . 80

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Selecting Audio Out

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

On-Screen Menus Language Selection

. . . . . . . . . . . . . . 83

Closed Caption

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

TIME SETTING

Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Auto Shut-off Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Programming the Remote Control

. . . . . . . . . . . . . . . . . . . 93

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

External Control Through RS-232C

. . . . . . . . . . . . . . . . . .97

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 5

FOR LCD TV

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

OOnn DDiissppoossaall ((OOnnllyy,, HHgg..llaa mmpp uusseedd LLCCDD TTVV)) a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

PREPARATION

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 6

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images below.

Owner's Manual

1.5V 1.5V

Owner’s Manual

Batteries

(Some Models)

Power Cord

RF Adapter (Some Models)

You must connect it to the antenna wire after fixing in Antenna Input. This adapter is only supplied in Argentina.

* Only wipe spots on the exterior with the polishing cloth. * Do not wipe roughly when removing stain. Please be cau-

tions of that excessive pressure may cause scratch or discoloration.

Polishing Cloth

(This feature is not available

for all models.)

M U

T E

RETURN

A V

E F A

T V

. M E

N U

ENTER

O L

123

456

Q.VIEW

I N

P U

S T

PIP

Remote Control

FFoorr PPllaassmmaa TTVV mmooddeellss

Cable Management Clip

(Only 50PG60**

50/60PG70** )

Protection cover

(Refer to p.19)

(This accessories can be different from

the figures shown here depending on your

models.)

FFoorr LLCCDD TTVV mmooddeellss

(Only 42PG60**)

Cable Holder

Bolts for stand

assembly

(Refer to P.13)

x 4

Cable

Management

Clip

Protection cover

(Refer to p.19)

(This accessories can be

different from the figures shown here

depending on your models.)

Bolts for stand assembly

(Refer to P.14)

(Only 32LG60**)

(Only 42LG60**)

x 3

x 4

x 2

x 4

x 1

3322//4422//4477LLGG 6600

** **

Protection cover

(Refer to p.19)

(This accessories can be different

from the figures shown here depend-

ing on your models.)

Screw for stand fixing

(Refer to P20)

Bolts for stand assembly

(Refer to P.14)

x 4

3322LL GG7700

** **

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 7

PREPARATION

FRONT PANEL INFORMATION

PREPARATION

■

Image shown may differ from your TV.

■

NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).

Plasma TV Models

CHANNEL (

EE, DD

)

Buttons

VOLUME (-,+) Buttons

MENU Button

ENTER Button

INPUT Button

VOL

INPUT

ENTER

Remote Control Sensor POWER Button

Power/Standby Indicator

Illuminates red in standby mode. Illuminates green when the set is

switched on.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 8

PREPARATION

Intelligent Sensor

Adjusts picture according to the surrounding conditions

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

POWER

Remote Control Sensor

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates White when the TV is switched on.

Note: You can adjust

PPoowwee rr

IInnddiiccaatt oorr

in the Option menu.

LCD TV Models

POWER Button

Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the set is switched on. (Can be adjusted using

PPoowweerr IInnddiiccaattoorr

the

Option menu.)

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

Intelligent Sensor

Adjusts picture according to the surrounding conditions

Remote Control Sensor

32/42/47LG60**

32LG70**

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 9

VOL

ENTER

INPUT

VOL

ENTER

INPUT

PREPARATION

BACK PANEL INFORMATION

PREPARATION

Plasma TV Models

■

Here shown may be somewhat different from your TV.

S-VIDEO

42/50PG60**

50/60PG70**

COMPONENT IN

AUDIO

(RGB/DVI)

RGB IN (PC)

RS-232C IN

VIDEO

AUDIO

HDMI/DVI IN

ANTENNA IN

HDMI IN

VIDEO

AUDIO

AV IN 1

AV OUT

MONO L /

VARIABLE AUDIO OUT

VIDEO

(CONTROL )

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 10

HDMI/DVI IN

IN 1

VIDEO

OUT

HDMI IN

(

)

AUDIO

MONO

VARIABLE AUDIO OUT

RGB(PC)

VIDEO

COMPONENT IN

RS-232C IN

(CONTROL )

AUDIO

(RGB/DVI)

AUDIO

RGB IN

ANTENNA IN

PREPARATION

LCD TV Models

HDMI IN HDMI/DVI IN

AUDIO

RGB

(PC)

RGB IN

COMPONENT IN

AUDIO

VIDEO

(RGB/DVI)

L/L/MONOMONO

AUDIOAUDIO

VIDEOVIDEO

IN 1

OUT

VARIABLE AUDIO OUTVARIABLE AUDIO OUT

AV IN 2

ANTENNA IN

32/42/47LG60**

AV IN 2

32LG70**

AV IN 2

32LG60

AV IN 2

42/47LG60

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 11

PREPARATION

HDMI/DVI IN, HDMI IN

Connect a HDMI (DVI) connection to either input.

AV (Audio/Video) IN 1

Connect audio/video output from an external device to these jacks.

AV OUT

Connect a second TV or monitor.

VARIABLE AUDIO OUT

Connect an external amplifier or add a subwoofer to your surround sound system.

COMPONENT IN

Connect a component video/audio device to these jacks.

ANTENNA IN

Connect over-the air signals to this jack.

RGB IN RGB(PC)

Connect the output from a PC.

AUDIO(RGB/DVI)

Connect the audio from a PC or DTV.

RS-232C IN (CONTROL)(Only Plasma TV models)

For external control devices.

Power Cord Socket

For operation with AC power. Caution: Never attempt to operate the TV on DC

power.

AV (Audio/Video) IN 2

Connect audio/video output from an external device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

USB IN

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 12

PREPARATION

STAND INSTALLATION

■

Image shown may differ from your TV

Plasma TV Models

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the parts of the

SSttaanndd BBoo ddyy

with

the

CCoo vveerr BBaassee

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

SSTTAANN DD BBOO DD YY

CCOOVVEERR BBAASSEE

50/60PG70**

42PG60**

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation). If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

NOTE

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 13

PREPARATION

LCD TV Models

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the parts of the

SSttaanndd BBoo ddyy

with

the

CCoo vveerr BBaassee

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

SSTTAANN DD BBOO DD YY

CCOOVVEERR BBAASSEE

32LG60

SSTTAANN DD BBOO DD YY

42LG60

CCOOVVEERR BBAASSEE

32/42LG60** 32LG70**

Assemble the parts of the

SSTTAANN DD BBOODDYY

with

CCOOVVEERR BBAASSEE

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

SSTTAANN DD BBOO DD YY

CCOOVVEERR BBAASSEE

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

NOTE

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 14

PREPARATION

CABLE MANAGEMENT

■

Here shown may be somewhat different from your TV.

Plasma TV Models

42PG60**

Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP as shown. If your TV has CABLE HOLDER, fix it as shown and bundle the cables.

CABLE MANAGEMENT CLIP

CABLE HOLDER

Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

- If the TV is dropped, you may be injured or the product may be broken.

NOTE

How to remove the CABLE MANAGEMENT CLIP

First, press the cable management. Hold the

CCAABBLLEE MMAANNAAGGEE MMEENNTT

CCLLIIPP

with both hands and pull it upward.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 15

PREPARATION

Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

- If the TV is dropped, you may be injured or the product may be broken.

NOTE

Plasma TV Models

50PG60**, 50/60PG70**

CABLE MANAGEMENT CLIP

How to remove the CABLE MANAGEMENT CLIP

Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP sec-

tion.

Install the CABLE MANAGEMENT CLIP as shown.

Separate

CCAABBLLEE MMAANN--

AAGGEEMMEENNTT CC LLIIPP

from TV

by pressing two latches.

Hold the CABLE MANAGEMENT CLIP with both

hands and pull it upward.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 16

PREPARATION

LCD TV Models

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP as shown.

CABLE MANAGEMENT CLIP

Align the hole with the tab on the

CCAABBLL EE

MMAANNAAGGEEMMEENNTT CC LLIIPP

Turn the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLL II PP

shown. Note: This cable management clip can be bro-

ken by excessive pressure.

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.

32/42LG60** 32LG70**

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 17

PREPARATION

SECURING THE TV TO THE WALL FALL OVER.

This feature is not available for all models. Here shown may be somewhat different from your TV.

■

Position the TV close to the wall to avoid the possibility of it falling when pushed.

■

The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

■

You should purchase necessary components to prevent TV from falling off of the stand.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

NOTE

When moving the TV undo the cords first.

Use a platform or cabinet strong and large enough to support the size and weight of the TV.

To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 18

PREPARATION

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

PROTECTION COVER

After removing the protection paper from the protection cover, adhere it to the TV as shown.

■

Image shown may differ from your TV.

After removing the stand, install the included

pprrootteeccttiioo nn ccoovveerr

over the hole for the stand.

Press the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV until you hear it click.

Plasma TV Models

LCD TV Models 32/42/47LG60**

LCD TV Models 32LG70**

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 19

PREPARATION

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

WALL MOUNT: HORIZONTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use an LG brand wall mount when mounting the TV to a wall.

■

This part mainly use picture for Plasma TV model.

4 inches

ATTACHING THE TV TO A DESK (Only 32LG70**)

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

1-Screw

(provided as parts of the product)

Stand

Ensure adequate ventilation by following the clearance recommendations.

Do not mount near or above any type of heat source.

CAUTION

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

WARNING

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 20

PREPARATION

ANTENNA

AV IN 2

ANTENNA CONNECTION

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Outdoor Antenna

Wall Antenna Socket

RF Coaxial Wire (75 ohm)

Antenna

UHF

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

■

If signal needs to be split for two TVs, use an antenna signal splitter for connection.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA

AV IN 2

Signal Amplifier

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 21

EXTERNAL EQUIPMENT SETUP

HDMI IN HDMI DVI IN

HDMI/DVI IN

COMPONENT IN

VIDEO

AUDIO

L/MONO

AUDIO

VIDEO

1 2

HD RECEIVER SETUP

When connecting with a component cable

Connect the video outputs (Y, PB, PR

)

of the digital set

top box to the

CCOOMMPPOONNEENNTT II NN VVIIDDEEOO

jacks on the

TV.

Connect the audio output of the digital set-top box to the

CCOOMMPPOONNEENNTT II NN AAUUDD IIOO

jacks on the TV.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

CC oommpp oonneenntt 11

input source using the

IINN PPUUTT

button on the remote control. If connected to

CCOOMMPPOONNEENNTT IINN 22

, select

CC oommpp oonneenntt 22

input source.

■

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the Plasma TV models.

■

Image shown may differ from your TV.

Signal

480i/576i

480p/576p

720p/1080i

10 8 0 p

Component

Yes Yes Yes Yes

(Only 50Hz, 60Hz)

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 22

EXTERNAL EQUIPMENT SETUP

HDMI IN HDMI DVI IN

HDMI/DVI IN

HDMI IN HDMI DVI IN

HDMI IN HDMI IN HDMI/DVI IN HDMI/DVI IN

1 2

L/MONO

AUDIO

VIDEO

L/L/MONOMONO

AUDIOAUDIO

IN 1

VIDEOVIDEO

OUT

VARIABLE AUDIO

When connecting with a HDMI cable

Connect the HDMI output of the digital set-top box to the HHDDMMII//DDVVII IINN 11,, HHDDMMII IINN 22 orHHDDMMII IINN 33

(Except

32LG60**) jack on the TV.

Select

HHDDMMII11//DD VVII ,, HHDD MMII 22

HHDDMMII33

(Except

32LG60**) input source using the

IINN PPUUTT

button on

the remote control.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

TV can receive the video and audio signal simultaneously with using a HDMI cable.

NOTE

Resolution

720x480

720x576

1280x720

1920x1080i

1920x1080p

HDMI-DTV mode

Horizontal Vertical

Frequency(kHz) Frequency(Hz)

31.47 59.94

31.50 60.00

31.25 50.00

44.96 59.94

45.00 60.00

37.50 50.00

33.72 59.94

33.75 60.00

28.125 50.00

67.432 59.94

67.50 60.00

56.25 50.00

27.0 24. 00

33.75 30.00

Plasma TV Models

LCD TV Models

Resolution

720x480

720x576

1280x720

1920x1080i

1920x1080p

Horizontal Vertical

Frequency(kHz) Frequency(Hz)

31.47 59.94

31.50 60.00

31.25 50.00

44.96 59.94

45.00 60.00

37.50 50.00

33.72 59.94

33.75 60.00

28.125 50.00

67.432 59.94

67.50 60.00

56.25 50.00

27.00 24.00

33.75 30.00

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 23

EXTERNAL EQUIPMENT SETUP

HDMI IN HDMI IN HDMI DVI IN HDMI DVI IN

HDMI/DVI IN

AUDIO

(RGB/DVI)

RGB

(PC)

RGB IN

RS-232C IN

(CONTROL)

L/L/MONOMONO

AUDIOAUDIO

IN 1

VIDEOVIDEO

OUT

VARIABLE AUDIO

Connect the DVI output of the digital set-top box to the

HHDDMMII//DD VVII IINN 11

jack on the TV.

Connect the audio output of the digital set-top box to the

AAUU DDIIOO((RRGGBB//DD VVII))

jack on the TV.

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

Select

HHDDMMII11//DD VVII

input source using the

IINN PPUUTT

button on the remote control.

When connecting with a HDMI to DVI cable

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 24

EXTERNAL EQUIPMENT SETUP

COMPONENT IN

VIDEO

AUDIO

1 2

DVD SETUP

When connecting with a component cable

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

B-Y

R-Y

Connect the video outputs (Y, P

B, PR

)

of the DVD to the

CCOOMMPPOONNEENNTT II NN VVIIDDEEOO

jacks on the TV.

Connect the audio outputs of the DVD to the

CCOO MMPPOO--

NN EENNTT IINN AAUUDDIIOO

jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

CC oommpp oonneenntt 11

input source using the

IINN PPUUTT

button on

the remote control. If connected to

CCOOMMPPOONNEENNTT IINN 22

, select Component

input source.

Refer to the DVD player's manual for operating instructions.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 25

EXTERNAL EQUIPMENT SETUP

When connecting with an S-Video cable

Connect the S-VIDEO output of the DVD to the

SS --

VVIIDD EEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUU DDIIOO

input jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

AAVV22

input source using the

IINN PPUUTT

button on

the remote control.

Refer to the DVD player's manual for operating instructions.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 26

S-VIDEO

S-VIDEOVIDEO

OUTPUT SWITCH

L R

ANT IN

ANT OUT

EXTERNAL EQUIPMENT SETUP

HDMI IN HDMI DVI IN

HDMI IN HDMI IN HDMI/DVI IN HDMI/DVI IN

1 2

HDMI IN HDMI DVI IN

AV IN 2

L/L/MONOMONO

AUDIOAUDIO

IN 1

VIDEOVIDEO

OUT

VARIABLE AUDIO

( )

When connecting HDMI cable

Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN 11,HHDDMMII IINN 22

HHDDMMII IINN 33

(Except

32LG60**) jack on the TV.

Select

HHDDMMII11//DD VVII, HHDDMMII22

HHDDMMII33

(Except

32LG60**) input source using the

IINN PPUUTT

button on

the remote control.

Refer to the DVD player's manual for operating instructions.

TV can receive the video and audio signal simultaneously with using a HDMI cable.

If the DVD supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

(42/47LG60**, 50/60PG70**: 1920X1080i/1080p)

NOTE

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 27

EXTERNAL EQUIPMENT SETUP

HDMI IN HDMI DVI IN

ANTENNA IN

OUTPUT SWITCH

ANT IN

S-VIDEO VIDEO

ANT OUT

Wall Jack

Antenna

VCR SETUP

When connecting with an antenna

■

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

■

Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.

Connect the ANT OUT socket of the VCR to the

AANNTTEENN NNAA IINN

socket on the TV.

Connect the antenna cable to the ANT IN socket of the VCR.

Press the PLAY button on the VCR and match the appropriate program between the TV and VCR for viewing.

MFL41469209-Edit1-en 5/28/08 11:50 AM Page 28

+ 78 hidden pages