LG 47LD950 Owner's Manual

ENGLISH

OWNER’S MANUAL

LCD TV

Please read this manual carefully before operating
your set and retain it for future reference.

www.lg.com

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

I

CONTENTS

CONTENTS

PREPARATION

47LD9

***

................................................................ A-1

EXTERNAL EQUIPMENT SETUP

Antenna Connection..................................................1

Connecting with a Component cable................... 2

Connecting with an HDMI cable ........................... 3

Connecting with an HDMI to DVI cable .............. 3

Connecting with a Euro Scart cable.......................4

Usb setup .....................................................................4

Connecting with a RCA cable..................................5

Connecting with a RF Cable.....................................5

Connecting with a D-sub 15 pin cable..................6

Insertion of CI Module ..............................................6

digital audio out SETUP............................................7

HEADPHONE SETUP.................................................7

Supported Display Resolution.................................8

Screen Setup for PC mode.......................................9

WATCHING TV / PROGRAMME CONTROL

Turning on the TV................................................... 13

Initializing setup .......................................................13

Programme Selection ............................................. 13

Volume Adjustment ................................................ 13

Quick Menu ............................................................. 14

On-Screen Menus Selection and Adjustment... 15

Auto Programme Tuning......................................... 16

Manual Programme Tuning (In Digital Mode)... 19
Manual Programme Tuning (In Analogue Mode).. 21

Programme Edit ....................................................... 23

Booster.......................................................................25

Software Update...................................................... 26

Diagnostics............................................................... 27

CI Information.......................................................... 28

Selecting the Programme List .............................. 29

Favourite Programme Setup.................................. 30

Input List ................................................................... 31

Data Service...............................................................32

Input Label.................................................................33

Simple manual.......................................................... 34

............................................................. 35

AV Mode ................................................................... 38

Initializing (Reset to original factory settings) ..39

TO USE THE 3D VIDEO

When using a 3D video......................................... 40

To watch TV in 3D video....................................... 41

How to watch 3D video..........................................42

TO USE A USB DEVICE

When connecting a USB device .......................... 43

Photo List.................................................................. 44

Music List ...................................................................48

Movie List...................................................................51

DivX Registration Code ..........................................55

Deactivation ..............................................................56

II

CONTENTS

CONTENTS

EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)

Switch on/off EPG .................................................. 57

Select a Programme................................................ 57

Button Function in NOW/NEXT Guide Mode . 57

Button Function in 8 Day Guide Mode...............58

Button Function in Date Change Mode............. 58

Button Function in Extended Description Box. 59

Button Function in Record/Remind Setting Mode......

59

Button Function in Schedule List Mode............. 59

PICTURE CONTROL

Picture Size (Aspect Ratio) Control................... 60

Picture Wizard ...........................................................62

Energy Saving............................................................63

Preset Picture Settings

- Picture Mode-Preset........................................ 64

Manual Picture Adjustment

- Picture Mode-User option............................. 65

Picture Improvement Technology........................ 66

Expert Picture Control........................................... 67

Picture Reset ............................................................ 70

Power Indicator .........................................................71

Demo Mode ............................................................. 72

Mode Setting.............................................................73

SOUND & LANGUAGE CONTROL

Auto Volume Leveler............................................... 74

Clear Voice II .............................................................75

Preset Sound Settings - Sound Mode................ 76

Sound Setting Adjustment -User Mode..............77

SRS TruSurround XT .............................................. 77

Balance ...................................................................... 78

TV Speakers On/ Off Setup..................................79

DTV Audio setting (In Digital Mode only)........80

Selecting Digital Audio Out...................................81

Audio Reset ...............................................................82

Audio Description (In Digital Mode only)..........83

I/II

- Stereo/Dual Reception (In Analogue Mode

Only)...................................................................... 84

- NICAM Reception (In Analogue Mode Only) .... 85

- Speaker Sound Output Selection................. 85

On-Screen Menu Language/Country Selection.. 86

Language Selection (In Digital Mode only)...... 87

TIME SETTING

Clock Setup.............................................................. 88

Auto On/ Off Time Setting................................... 89

Sleep Timer Setting................................................ 90

PARENTAL CONTROL / RATINGS

Set Password & Lock System ............................... 91

Block Programme .................................................... 92

Parental Control (In Digital Mode only)............ 93

External Input Blocking...........................................94

Key Lock.................................................................... 95

TELETEXT

Switch on/off........................................................... 96

SIMPLE Text.............................................................. 96

TOP Text................................................................... 96

FASTEXT.................................................................... 97

Special Teletext Functions..................................... 97

DIGITAL TELETEXT

Teletext within Digital Service.............................. 98

Teletext in Digital Service...................................... 98

APPENDIX

Troubleshooting ...................................................... 99

Maintenance .......................................................... 101

Product Specifications......................................... 102

IR Codes.................................................................. 103

External Control Device Setup .......................... 104

A-1

PREPARATION

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.

■

Image shown may differ from your TV.

Owner’s Manual Batteries

(AAA)

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the screen.

* Lightly wipe any stains

or fingerprints on the
surface of the TV with
the polishing cloth.

Do not use excessive force.
This may cause scratching
or discolouration.

POWER

AV

MODE

ENERGY SAVING

P

A

G

E

P

FAV

MARK/

MUTE

ON/OFF

123

45

0

6

789

LIST

Q.VIEW

INPUT

MENU

3D

Q.MENU

RETURN

EXIT

L/R SELECT

GUIDE

INFO

OK

TV/RAD

Ferrite Core

(

This item is not included for

all models.

)

Protection

Cover

Install the power plug closely.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.

(M4x24)

Bolts for stand assembly

Wall Mounting Bracket

LSW200B or

LSW200BG

x 4

Separate purchase

LCD TV Models : 47LD9

***

3D glasses / Cloth /

Case

A-2

PREPARATION

PREPARATION

FRONT PANEL CONTROLS

■

Image shown may differ from your TV.

G

When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control).

G

Do not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall.

G

Do not drag the TV. The floor or the product may be damaged.

CAUTION

NOTE

!

G

TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.

INPUT

MENU

OK

P

PROGRAMME

VOLUME

OK

MENU

INPUT

POWER

Remote Control Sensor
Intelligent Sensor

Adjusts picture according to
the surrounding conditions.

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates blue when the TV is switched on.

Main Power Switch

A-3

PREPARATION

BACK PANEL INFORMATION

A

Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The voltage is
indicated on the Specifications page.(

GG

p.102

)

Never attempt to operate the TV on DC power.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an
external device to these jacks.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to HDMI
cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.

Component Input

Connect a component video/audio device to
these jacks.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory Card
International Association) Card Slot

Insert the CI Module to

PPCC MMCC IIAA CCAA RRDD SSLLOOTT..

(This feature is not available in all countries.)

Audio/Video Input

Connect audio/video output from an external
device to these jacks.

Headphone Socket

Plug the headphone into the headphone socket.

1

2

3

4

5

6

8

7

9

10

11

12

13

AV IN 3

L/MONO

R

AUDIOAUDIO

VIDEOVIDEO

HDMI

IN 4

H/P

11

10

5

12

13

1

HDMI / DVI IN

2

3

1(DVI)

ANTENNA IN

AV IN 3

L/ MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

(RGB)

243

95 6 7 8

A-4

PREPARATION

PREPARATION

STAND INSTALLATION

■

Image shown may differ from your TV
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tight­en the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.

BACK COVER FOR WIRE
ARRANGEMENT

■

Image shown may differ from your TV.

1

2

3

Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the
back of the TV.

Connect the cables as necessary.
To connect additional equipment,

see the External Equipment

Setup section.

1

Open the

Cable Management Clip

as shown.

2

Cable Management Clip

Fit the

Cable Management Clip

as shown.

3

NOTE

!

GG

Do not use the

Cable Management Clip

to lift the

TV.

- If the TV is dropped, you may be injured or the
TV may be damaged.

A-5

PREPARATION

SWIVEL STAND

■

Image shown may differ from your TV.

After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.

KENSINGTON SECURITY SYSTEM

■

Image shown may differ from your TV.

The TV is equipped with a Kensington Security
System connector on the back panel. Connect the
Kensington Security System cable as shown below.

For the detailed installation and use of the Kensington
Security System, refer to the user’s guide provided
with the Kensington Security System.

For further information, contact http://www.kensing-
ton.com, the internet homepage of the Kensington

company. Kensington sells security systems for expensive electron­ic equipment such as notebook PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a. If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.
This is normal, there is nothing wrong with TV.

b. Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the moni­tor's performance.

c. Avoid touching the LCD screen or holding your finger(s)

against it for long periods of time.
Doing so may produce some temporary distortion

effects on the screen.

CAREFUL INSTALLATION ADVICE

A

You should purchase necessary components to fix the TV

safety and secure to the wall on the market.

A

Position the TV close to the wall to avoid the possibility
of it falling when pushed.

A

The instructions shown below are a safer way to set up
the TV, by fixing it to the wall, avoiding the possibility of
it falling forwards if pulled. This will prevent the TV from
falling forward and causing injury. This will also prevent
the TV from damage. Ensure that children do not climb
or hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough
to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the
bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then
bolts.)

* Insert the eye-bolts or TV brackets/bolts and tight-

en them securely in the upper holes.

Secure the wall brackets with the bolts on the wall.
Match the height of the bracket that is mounted on
the wall.

3

Use a sturdy rope to tie the product for alignment. It
is safer to tie the rope so it becomes horizontal
between the wall and the product.

2

1

2

1

A-6

PREPARATION

PREPARATION

A

The TV can be installed in various ways such as on
a wall, or on a desktop etc.

A

The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker.

Do not try to earth the TV by connecting it to tele­phone wires, lightening rods or gas pipes.

WALL MOUNT: HORIZONTAL
INSTALLATION

A

We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.

A

We recommend that you purchase a wall mounting
bracket which supports VESA standard.

A

LG recommends that wall mounting be performed by a
qualified professional installer.

NOTE

!

G Should Install wall mount on a solid wall perpendicular to

the floor.

G Should use a special wall mount, if you want to install it to

ceiling or slanted wall.

G The surface that wall mount is to be mounted on should

be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.

G Installing screw type and length depends on the wall

mount used. Further information, refer to the instructions
included with the mount.

G LG is not liable for any accidents or damage to property or

TV due to incorrect installation:

- Where a non-compliant VESA wall mount is used.

- Incorrect fastening of screws to surface which may cause

TV to fall and cause personal injury.

- Not following the recommended Installation method.

10 c m

10 c m

10 c m

10 c m

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 10cm
all around the TV.

Model

VESA

(A *B)

Standard

Screw

Quantity

47LD9

***

200 * 200 M6 4

■

Image shown may differ from your TV.

When installing the wall-mounted unit, use the
protection cover.

NOT USING THE DESK­TYPE STAND

Insert the

PPrr oott ee cc ttiioonn

CCoovvee rr

into the TV until

clicking sound.

Protection Cover

Power Supply

Circuit breaker

10 c m

10 c m

10 c m

10 c m

10 c m

AA

BB

A-7

PREPARATION

POWER

AV

MODE

ENERGY SAVING

P
A
G
E

P

FAV

MARK/

MUTE

ON/OFF

123

4506

789

LIST

Q.VIEW

INPUT

MENU

3D

Q.MENU

RETURN

EXIT

L/R SELECT

GUIDE

INFO

OK

TV/RAD

MENU

3D

Q. MENU

THUMBSTICK

(Up/Down/Left/Right)

OK

GUIDE

INFO i

RETURN(EXIT)

Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.(

GG

pp.. 1155

)

Use this to view the 3D video. (

GG

pp.. 4400

)

Select the desired quick menu source. (Aspect Ratio,
Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep
Timer, Favourite, USB Device).(

GG

pp.. 1144

)

Allows you to navigate the on-screen menus and adjust
the system settings to your preference.

Accepts your selection or displays the current mode.

Shows programme schedule.(

GG

pp.. 5577

)

Shows the present screen information.

Allows the user to move return one step in an interactive
application, EPG or other user interaction function.

0~9 number

button

LIST

Q.VIEW

Selects a programme.
Selects numbered items in a menu.

Displays the programme table.

(

GG

pp.. 2299

)

Returns to the previously viewed programme.

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

POWER

ON/OFF

TV/RAD

ENERGY SAVING

AV MODE

INPUT

Switches the TV on from standby or off to standby.

Key lighting on or off.

Selects Radio, TV and DTV channel.

Adjust the Energy Saving mode of the TV.(

GG

pp.. 6633

)

It helps you select and set images and sounds when
connecting AV devices.(

GG

pp.. 3388

)

External input mode rotate in regular sequence.

(

GG

pp.. 3311

)

Coloured

buttons

These buttons are used for teletext (on

TTEE LLEETTEEXX TT

models only) ,

PPrr oo ggrr aa mmmmee ee ddii tt

.

L/R SELECT Use this to view the 3D video. (

GG

pp.. 4422

)

A-8

PREPARATION

PREPARATION

POWER

AV

MODE

ENERGY SAVING

P
A
G
E

P

FAV

MARK/

MUTE

ON/OFF

123

4506

789

LIST

Q.VIEW

INPUT

MENU

3D

Q.MENU

RETURN

EXIT

L/R SELECT

GUIDE

INFO

OK

TV/RAD

VOLUME UP

/DOWN

MARK

FAV

MUTE

Programme

UP/DOWN

PAGE

UP/DOWN

Adjusts the volume.

Select the input to apply the Picture Wizard settings.
Check and un-check programmes in the USB menu.

Displays the selected favourite programme.

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the next
one.

See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu

appears at the screen.(

GG

pp.. 3355

)

SIMPLINK /

USB Menu

control buttons

Controls SIMPLINK or USB menu(Photo List and Music
List or Movie List ).

1

These buttons are used for teletext.
For further details, see the ‘Teletext’ section.(

GG

pp.. 9966

)

Recalls your preferred subtitle in digital mode.

TELETEXT
BUTTONS

SUBTITLE

1

Installing Batteries

■

Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).

■

Install two 1.5 V AAA batteries. Do not mix old or used batteries
with new ones.

■

Close cover.

■

To remove the batteries, perform the installation actions in reverse.

1

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

ANTENNA IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

ANTENNA IN

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

ANTENNA CONNECTION

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Outdoor
Antenna
(VHF, UHF)

Wall
Antenna
Socket

RF Coaxial Wire (75 Ω)

Antenna

UHF

Signal
Amplifier

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

2

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH A COMPONENT CABLE

■

To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.

■

Image shown may differ from your TV.

HDMI / DVI IN

2

3

1(DVI)

(RG

1

2

Signal

480i/576i

480p/576p

720p/1080i

10 8 0 p

Component

O

O

O

O

(50 Hz / 60 Hz only)

HDMI

X

O

O

O

(24 Hz / 30 Hz / 50 Hz / 60 Hz)

■

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connect the video outputs (Y, PB, PR

)

of the external

equipment (digital set-top box, DVD, etc.) to the

CC OO MM--

PPOONNEENNTT IINN VVIIDDEE OO

jacks on the TV.

Connect the audio output of the external equipment
(digital set-top box, DVD, etc.) to the

CCOOMMPPOONNEE NN TT

IINN AAUU DDIIOO

jacks on the TV.

Turn on the external equipment.
(

Refer to the external equipment's manual for operating

instructions.)

Select the

CCoommppoonneenntt

input source using the

IINNPP UUTT

button on the remote control.

2

3

4

1

GG

HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

Y

Y

Y

Y

PB

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

3

EXTERNAL EQUIPMENT SETUP

HDMI / DVI IN

2

3

1(DVI)

CONNECTING WITH AN HDMI CABLE

1

Connect the HDMI output of the external equipment
(digital set-top box, DVD, etc.) to

HHDDMMII//DDVVII IINN

11 ((DDVVII)),HHDDMMII//DDVVII II NN 22 ,, HHDDMMII//DDVVII IINN 33

or

HHDDMMII II NN 44

jack on the TV.

Turn on the external equipment.
(

Refer to the external equipment's manual for operating

instructions.)

Select

HHDDMMII 11, HHDDMMII 22, HHDD MMII 33

or

HHDDMMII 44

input

source using the

IINNPP UUTT

button on the remote control.

2

3

1

2

GG

The TV can receive video and audio signals simultaneously
when using an HDMI cable.

GG

If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.

GG

Check that your HDMI cable is High Speed HDMI Cable. If
the HDMI cables are not High Speed HDMI Cable, flickering
or no screen display can result. Please use the High Speed
HDMI Cable.

NOTE

!

DVI-PC OUTPUT

AUDIO

HDMI / DVI IN

1(DVI)

2

3

AV IN 3

L/ MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

HDMI

IN 4

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

(RGB)

CONNECTING WITH AN HDMI TO DVI CABLE

1

2

Connect the digital set-top box or the DVI output of the
PC to

HHDDMMII//DDVV II IINN 11((DDVVII))

jack on the TV.

Connect the audio output of the digital set-top box or
the PC audio output to the

AAUUDDIIOO IINN (( RRGGBB//DDVVII))

jack on the TV.

Turn on the digital set-top box or the PC and the TV.
(

Refer to the digital set-top box or the PC manual for

operating instructions.)

Select

HHDDMMII 11

input source using the

IINNPP UUTT

button

on the remote control.

2

3

4

1

or

4

EXTERNAL EQUIPMENT SETUP

(RGB)

ANTENNA IN

(R) AUDIO (L)

AUDIO/
VIDEO

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

HDMI

IN 4

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

1

2

3

1

CONNECTING WITH A EURO SCART CABLE

Connect the Euro scart socket of the external equip­ment (DVD, VCR, etc.) to the

AAVV11

Euro scart socket on

the TV.

Turn on the external equipment.
(

Refer to the external equipment's manual for operating

instructions.)

Select

AA VV 11

input source using the

IINNPP UUTT

button on

the remote control.
If connected to

AA VV 22

Euro scart socket, select

AA VV 22

input source.

USB SETUP

1

Connect the USB device to the

UUSSBB II NN

jack on the

TV.

After connecting the

UUSSBB II NN

jack, you use the

UUSS BB

function. (

GG

pp .. 44 33

)

2

1

EXTERNAL EQUIPMENT SETUP

NOTE

!

GG

Any Euro scart cable used must be signal shielded.

Scart

AV1

AV2

Input

Video Audio RGB

Output

Video, Audio

Analogue only

Analogue

, DTV, AV1/2/3 output is available.

OOO

OOX

GG

TV Out : Outputs analogue

TV signals.

Monitor Out: Outputs

the current screen image.

Digital TV

Analogue TV, AV1/3

Component/RGB

HDMI

AV2

AV1

(TV Out)

XO O

OO O

OX

XX

OO O

AV2

(Monitor Out)

AV2

(When DTV scheduled recording is in
progress using recording equipment.)

(The input mode is converted to

DTV.)

Output Type

Current
input mode

or

5

EXTERNAL EQUIPMENT SETUP

L

R

S-VIDEO

VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

L R

VIDEO

AV IN 3

L/ MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

HDMHDMI

IN 4

AV IN 3

L/MONO

R

AUDIOAUDIO

VIDEOVIDEO

H/P

CONNECTING WITH A RCA CABLE

Connect the

AAUU DD II OO/VVIIDDEEOO

jacks between TV and
VCR or external equipment. Match the jack colours
(Video = yellow, Audio Left = white, and Audio Right =
red)

Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.

)

Or, Operate the corresponding external equipment.
(Refer to external equipment operating guide.)

Select

AA VV 33

input source using the

IINNPP UUTT

button on

the remote control.

1

2

3

GG

If you have a mono VCR, connect the audio cable from the
VCR to the

AAUUDDIIOO LL //MMOO NN OO

jack of the TV.

NOTE

!

1

Camcorder

Video Game Set

or

OUTPUT
SWITCH

ANT IN

R

S-VIDEO VIDEO

ANT OUT

L

ANTENNA IN

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

HDMI

IN 4

CONNECTING WITH A RF CABLE

■

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

Connect the

AANNTT OOUU TT

socket of the VCR to the

AANNTT EENNNNAA IINN

socket on the TV.

Connect the antenna cable to the

AANNTT IINN

socket of

the VCR.

Press the

PPLL AAYY

button on the VCR and match the
appropriate channel between the TV and VCR for
viewing.

1

2

3

Wall Jack

Antenna

1

2

6

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH A D-SUB 15 PIN CABLE

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

RGB OUTPUT

HDMI / DVI IN

1(DVI)

2

3

AUDIO

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

1

2

4

Connect the RGB output of the PC to the

RRGG BB II NN

((PPCC))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO II NN

((RRGGBB//DDVV II))

jack on the TV.

Turn on the PC and the TV

Select

RR GGBB

input source using the INPUT button on

the remote control.

2

3

1

GG

Check if the CI module is inserted into the PCMCIA card slot in
the right direction. If the module is not inserted properly, this
can cause damage to the TV and the PCMCIA card slot.

NOTE

!

Insert the CI Module to

PPCC MMCC IIAA

(Personal Computer

Memory Card International Association)

CCAARR DD SSLLOOTT

of TV as shown.

For further information, see p.28.

1

INSERTION OF CI MODULE

-- TT oo vvii eeww tthhee eenncc rryy pp tt ee dd ((ppaayy)) ssee rrvv ii cceess iinn dd ii ggiittaall TTVV
mm oo dd ee ..

-- TThh ii ss ffee aa ttuurree ii ss nnoott aavvaaiill aa bb ll ee ii nn aallll ccoouunnttrrii ee ss..

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI

IN 4

H/P

AV IN 3

L/ MONO

R

AUDIO

VIDEO

H/P

DMI HDMI

Check this point as shown
and insert the CI Module.

7

EXTERNAL EQUIPMENT SETUP

H/P

G

Do not look into the optical output port. Looking at the
laser beam may damage your vision.

CAUTION

Connect one end of an optical cable to the TV Digital
Audio (Optical)Output port.

Connect the other end of the optical cable to the digi­tal audio (Optical)input on the audio equipment.

Set the “TV Speaker option - Off ” in the AUDIO
menu.(

G

pp ..7799

). Refer to the external audio equipment

instruction manual for operation.

2

3

1

1

2

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

Plug the headphone into the headphone socket.

To adjust the headphone volume, press the

++

or

--

button. If you press the MUTE button, the sound

from the headphone is switched off.

2

1

HEADPHONE SETUP

You can listen the sound through the headphone.

NOTE

!

GG

AAUU DD II OO

menu items are disabled when connecting a headphone.

GG

When changing

AAVV MMOODDEE

with a headphone connected, the change is applied to video but not to audio.

GG

Optical Digital Audio Out is not available when connecting a headphone.

Supported Display Resolution

8

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

NOTE

!

G

Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.

G

There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolu­tion or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.

G

The synchronization input waveform for
Horizontal and Vertical frequencies are separate.

G

We recommend using 1920x1080, 60 Hz for the
PC mode, this should provide the best picture
quality.

G

Connect the signal cable from the monitor out­put port of the PC to the RGB (PC) port of the
TV or the signal cable from the HDMI output
port of the PC to the HDMI IN (or HDMI/DVI
IN) port on the TV.

G

Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).

G

If using a sound card, adjust PC sound as
required.

G

If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or
HDMI/DVI IN) to display the PC output on the
TV.

G

If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)

G

DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.

G

If you use too long an RGB-PC cable that is too
long, there may be interference on the screen.
We recommend using under 5m of cable. This
provides the best picture quality.

RGB-PC, HDMI/DVI-PC mode

70.08

59.94

60.31

60.00

59.87

59.80

60.00

59.93

60.00

31.468

31.469

37.879

48.363

47.78

47.72

63.595

66.587

67.5

720x400

640x480

800x600

1024x768

1280x768

1360x768

1280x1024

1920x1080

(RGB-PC)

1920x1080

(HDMI-PC)

Resolution

Horizontal

Frequency(kHz)

Vertical

Frequency(Hz)

HDMI/DVI-DTV mode

59.94/60

50

50

59.94/60

59.94/60

50

23.97/24

29.976/30.00

50

59.94/60

31.469/31.5

31.25

37.5

44.96/45

33.72/33.75

28.125

26.97/27

33.716/33.75

56.25

67.43/67.5

Resolution

Horizontal

Frequency(kHz)

Vertical

Frequency(Hz)

720x480

720x576

1280x720

1920x1080

9

EXTERNAL EQUIPMENT SETUP

OK

Move

• Contrast 90

• Brightness 50

• Sharpness 70

• Colour 60

• Tint 0

• Advanced Control

• Picture Reset

Screen

PICTURE

RG

Screen

E

1

MENU

Screen Setup for PC mode

Returns Position, Size and Phase to the factory default settings.

This function works in the following mode : RGB[PC].

Screen Reset

Select

PPII CCTTUURR EE

.

Select

SSccrree ee nn

.

3

Select

RR eesseett

.

2

OK

OK

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUURRNN

button to move to the previous menu screen.

Select

YY ee ss

.

Run

RR eesseett

.

4

OK

5

OK

To Set

Auto Config.

SCREEN

Move

Prev.

Resolution

Position

Size

Phase

Reset

Yes No

10

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

OK

Move

• Contrast 90

• Brightness 50

• Sharpness 70

• Colour 60

• Tint 0

• Advanced Control

• Picture Reset

Screen

PICTURE

RG

Screen

E

Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is
still not correct, your TV is functioning properly but needs further adjustment.

AA uuttoo ccoonnffii gguu rr ee
This function is for automatic adjustment of the screen position, size, and phase The displayed image will be

unstable for a few seconds while the auto configuration is in progress.

Auto Configure (RGB [PC] mode only)

• If the position of the image is still not correct,

try Auto adjustment again.

• If picture needs to be adjusted again after Auto

adjustment in RGB (PC), you can adjust the
PPoossii ttiioonn, SSiizzee

or

PPhh aass ee

.

Select

PPII CCTTUURR EE

.

Select

SSccrree ee nn

.

Select

AAuu ttoo CC oonnffiigg ..

.

1

MENU

3

2

OK

OK

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Select

YY ee ss

.

Run

AAuu ttoo CC oonnffiigg ..

.

4

OK

5

OK

To Set

Auto Config.

SCREEN

Move

Prev.

Resolution

Position

Size

Phase

Reset

Yes No

11

EXTERNAL EQUIPMENT SETUP

OK

Move

• Contrast 90

• Brightness 50

• Sharpness 70

• Colour 60

• Tint 0

• Advanced Control

• Picture Reset

Screen

PICTURE

RG

Screen

E

To view a normal picture, match the resolution of RGB mode and selection of PC mode.

This function works in the following mode: RGB[PC]

Selecting Resolution

Select

PPII CCTTUURR EE

.

Select

SSccrree ee nn

.

Select

RReessoolluu tt ii oonn

.

Select the desired resolution.

1

MENU

3

4

2

OK

OK

OK

5

OK

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Auto Config.

SCREEN

Move

Prev.

Resolution

Position

Size

Phase

Reset

1024 x 768

1280 x 768

1360 x 768

12

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

OK

Move

• Contrast 90

• Brightness 50

• Sharpness 70

• Colour 60

• Tint 0

• Advanced Control

• Picture Reset

Screen

PICTURE

RG

Screen

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the pic­ture phase manually.

This function works in the following mode : RGB[PC].

Adjustment for screen Position, Size, Phase

Select

PPII CCTTUURR EE

.

Select

SSccrree ee nn

.

Select

PPoossii ttiioonn, SSiizzee

or

PPhh aass ee

.

Make appropriate adjustments.

1

MENU

3

4

2

OK

OK

OK 5OK

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Auto Config.

SCREEN

Move

Prev.

Resolution

Position

Size

Phase

Reset

E

13

WATCHING TV / PROGRAMME CONTROL

WATCHING TV / PROGRAMME CONTROL

TURNING ON THE TV

Firstly, connect the power cord correctly.
And switch the

MMaaiinn PPoowweerr SS ww ii ttcchh

on TV.

At this stage, the TV switches to standby mode.

In standby mode to turn TV on, press the

rr

/ I, INPUT or

P

D E

button on the TV or press the

POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.

2

1

1

INITIALIZING SETUP

Note:

a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not

work, depending on the DTV broadcasting environment.

d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.

e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data,

“Store Demo” mode initializes the product to the image quality set by us after a certain period of time.

f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION

menu.

If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
LLaann gguuaagg ee, MMooddee SSeetttt ii nngg, CCoouunntt rryy, AAuu ttoo TTuunnii nngg

.

- When your TV is turned on, you will be able to use its features.

PROGRAMME SELECTION

Press the

PP

or NUMBER buttons to select a programme

number.

1

VOLUME ADJUSTMENT

Press the

++ or--

button to adjust the volume.

If you wish to switch the sound off, press the MUTE button.

You can cancel this function by pressing the MUTE,
++ ,--

or AV Mode button.

1

14

WATCHING TV / PROGRAMME CONTROL

WATCHING TV / PROGRAMME CONTROL

AAssppeecctt RRaattiioo

: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom
Setting, the display goes back to Q.Menu.

CClleeaarr VVooiiccee IIII

: By differentiating the human
sound range from others, it helps users listen to
human voices better.

PPiicctt uurree MMoo ddee

: Selects your desired Picture

Mode.

SSoouunn dd MMooddee

: It is a feature to automatically set

the sound combination which it deems the best for
the images being watched. Selects your desired
Sound Mode.

AAuu ddiioo

: Selects the sound output.

SSlleeee pp TTiimmee rr

: Sets the sleep timer.

FFaavvoouu rriitt ee

: Selects the favourite programme.

UUSSBB DDeevviiccee

: Selects “Eject” in order to eject USB

device.

QUICK MENU

Display each menu.

Select your desired Source.

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.

1

Q.MENU

3

2

OK

• Press the

QQ..MMEENNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

F

F

Aspect Ratio

G

G

16:9

15

WATCHING TV / PROGRAMME CONTROL

ON SCREEN MENUS SELECTION AND ADJUSTMENT

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

NOTE

!

G

It is not possible to use

CCII II nnffoorr mmaattii oonn

in Analogue mode.

Display each menu.

Select a menu item.

Move to the pop up menu.

1

MENU

3

2

OK

OK

•

Press the

IINN FFOO

button, you can check the

SSiimmppllee MMaannuuaall

Menu.

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

OK

Move

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

TIME

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

SETUP

OPTION

PICTURE

LOCK

AUDIO TIME

USB

OK

Move

Aspect Ratio : 16:9

Picture Wizard

Energy Saving : Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

PICTURE

E

OK

Move

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

• SRS TruSurround XT : Off

• Treble 50

• Bass 50

AUDIO

E

LR

OK

Move

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

USB

OK

Move

Lock System : Off

Set Password

Block Programme

Parental Guidance : Blocking Off

Input Block

LOCK

OK

Move

Menu Language : English

Audio Language : English

Subtitle Language : English

Hard of Hearing( ) : Off

Country : UK

Input Label

SIMPLINK : On

Key Lock

: Off

OPTION

E

-+

INPUT

OK

Move

Antenna

AV1

AV2

AV3

Component

RGB

HDMI1

HDMI2

INPUT

E

16

WATCHING TV / PROGRAMME CONTROL

WATCHING TV / PROGRAMME CONTROL

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

AUTO PROGRAMME TUNING

(For countries other than Finland and Sweden)

Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 500. But the number may differ slightly depending
on broadcasting signals.

• Use NUMBER buttons to input a 4-digit pass-

word in

LLoocckk SSyyss tteemm‘OO nn

’.

• If you wish to keep on auto tuning select

SSttaa rrtt
using the button. Then, press the OK but-
ton. Otherwise select

CCll oo ss ee

.

•

AAuutt oommaattiicc NNuummbb eerrii nngg

: Decide whether to
use the programme numbers as sent by broad­casting stations for tuning.

Select

SSEE TT UU PP

.

Select

AAuu ttoo TTuunnii nngg

.

Select

SSttaa rrtt

.

Run

AAuu ttoo ttuu nniinngg

.

Auto Tuning Auto Tuning

1

MENU

3

2

OK

OK

4

OK

• Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Check your antenna connection.
The previous channel information
will be updated during Auto
Tuning.

SECAM L Search
Automatic Numbering

Start

Close

17

WATCHING TV / PROGRAMME CONTROL

AUTO PROGRAMME TUNING

(Only for Finland and Sweden)

DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.

• Use NUMBER buttons to input a 4-digit pass-

word in

LLoocckk SSyyss tteemm‘OO nn

’.

• If you wish to keep on auto tuning, select

SSttaa rrtt

using the button. Then, press the OK
button. Otherwise select

CCll oo ss ee

.

•

AAuu tt oommaatt ii cc NNuu mmbbeerr iinngg

: Decide whether to
use the programme numbers as sent by broad­casting stations for tuning.

Select

SSEE TT UU PP

.

Select

AAuu ttoo TTuunnii nngg

.

Select

AAnn tteennnn aa

.

Run

AAuu ttoo ttuu nniinngg

.

1

MENU

3

2

OK

OK

5

OK

•

Press the

MMEE NNUU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Check your antenna connection.
The previous channel information
will be updated during Auto
Tuning.

SECAM L Search
Automatic Numbering

Start

Close

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

Auto Tuning

OK

Move

Auto Tuning

Please select your TV Connection.

CableAntenna

Close

If you want to select the

AAnntteennnnaa

,

Select

SSttaa rrtt

.

4

OK

18

WATCHING TV / PROGRAMME CONTROL

WATCHING TV / PROGRAMME CONTROL

• Use NUMBER buttons to input a 4-digit pass-

word in

LLoocckk SSyyss tteemm‘OO nn

’.

• If you wish to keep on auto tuning, select

OO KK
using the button. Then, press the OK
button. Otherwise select

CCll oo ss ee

.

Run

AAuu ttoo ttuu nniinngg

.

6

OK

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

OK

Move

Auto Tuning

Manual Tuning

Programme Edit

Booster : Off

Software Update : On

Diagnostics

CI Information

SETUP

Select

SSEE TT UU PP

.

Select

AAuu ttoo TTuunnii nngg

.

Select

CCaa bb llee

.

Make appropriate adjust­ments.

Auto Tuning Auto Tuning

1

MENU

3

2

OK

OK

4

OK

• Press the

MM EE NN UU

button to return to normal TV viewing.

• Press the

RR EETTUU RRNN

button to move to the previous menu screen.

Please select your TV Connection.

CableAntenna

Close

Frequency(kHz)

FF

Default

GG

362000

Symbol rate(kS/s)

6875

Modulation

640AM

Network ID

0

Close

OK

1

456

7809

23

If you want to select the

CCaabbllee

,

The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies between 110 MHz
and 862 MHz to find available channels.
In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be taken too much.

•

FFrreeqquu ee nncc yy ::

Enter a user-defined frequency range.

•

SSyy mmbbooll rraatt ee ::

Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends

symbols to a channel).

•

MMoodduu ll aattiioonn ::

Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).

•

NN ee ttwwoorrkk II DD

(Sweden only)

::

Unique identifier allocated for each user.

NN oott ee

G

If you select

CCaa bb llee

after checking either Finland or Sweden, you can see

CChh aannnn eell AAuutt oo UUppddaattee

menu of

which the default value is

OO nn

.

G

If you keep it

OO nn

, the channel information will be automatically updated whenever the network information changes.

G

When

CChh aannnn eell AAuutt oo UUppddaattee

is

OO ff ff

, the channel information will not be updated.

Select

SSttaa rrtt

.

5

OK

To watch DVB-C in the countries excluding Finland and Sweden, select '

-- --

' as the

CCoouunntt rryy

in

OO PPTT II OO NN

.

You can select

UUssee rr

mode or

FFuu ll ll

mode in

AAuu ttoo TTuunnii nngg

.

The corresponding home frequency information may need to be changed when tuning the

UUssee rr

mode, and
the corresponding information depends on the Cable Service Operator (SO) in service.
During

FFuu ll ll

mode tuning, some channel may be restricted for some Cable Service Operator (SO), and it may
take a long time for tuning.
NN oott ee

G

Your cable provider may charge for their services, or require you to agree to its items and conditions of business.

G

DVB-C Cable may not operate correctly with some cable providers.

G

Compatibility with DVB-C digital cable broadcasts is not guaranteed.

AUTO PROGRAMME TUNING

If you select the

““-- --””

of Country Setting, (Except for Finland and Sweden)