LG 47LA740S User manual [en,fr]

OWNER’S MANUAL

*

LED TV

* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain

it for future reference.

LA62**
LA64**
LA66**
LA69**
LA71**
LA74**

P/NO : MFL67658603(1310-REV03)
Printed in Korea

LN57**
LN61**
LN65**

www.lg.com

A-2

TABLE OF CONTENTS

TABLE OF CONTENTS

A-3 SETTiNg up ThE TV

A-3 Attaching the stand
A-6 Tidying cables

A-7 MAKiNg CONNECTiONS

A-7 Antenna connection
A-8 Satellite dish connection
A-8 HDMI connection
A-9 - ARC (Audio Return Channel)
A-10 DVI to HDMI connection
A-11 Component connection
A-12 Composite connection
A-12 MHL connection
A-14 Audio connection
A-14 - Digital optical audio connection
A-15 USB connection
A-16 CI module connection
A-17 Headphone connection
A-18 Euro Scart connection

LANguAgE LiST

English
Français

COMMON

LANguAgE

B-1 SpECiFiCATiONS

COMMON

SETTING UP THE TV

Image shown may differ from your TV.

Attaching the stand

LA62**, LA64**, LA66** , LA71**, LN57**-ZE/ZK,
LN61** , LN65**

SETTING UP THE TV

(Only LA62**, LN57**-ZE/ZK, LN61**)

3

A-3

1

Stand Body

4EA

M4 x 14

Stand Base

(Only LA62**, LN57**-ZE/ZK, LN61**)

2

(Only LA64**, LA66** , LA71**, LN65**)

Front

4EA

M4 x 14

(Only LA64**, LA66** , LA71**, LN65**)

4EA

M4 x 14

A-4

SETTING UP THE TV

LA69**, LA74**

1

2

3

Stand Base

M4 x 20

4EA

SETTING UP THE TV

A-5

LN57**-ZA

1

2

Stand Base

P5 x 25

Stand Body

3EA

CAUTION

yWhen attaching the stand to the TV

set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

yMake sure that the screws are inserted

correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.

NOTE

yRemoving the protective film (from the

bottom)
(Depending on model)
Protective film is temporarily attached to
prevent the surface of the product from
being damaged during delivery.
Once the TV has been installed, please
remove the protective film on the bottom
of the unit as shown in the figure.

3

M4 x 14

yRemove the stand before installing the

TV on a wall mount by performing the

stand attachment in reverse.

4EA

A-6

⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ

SETTING UP THE TV

Tidying cables

1 Gather and bind the cables with the Cable

Holder and the Cable Management.

2 Fix the Cable Management rmly to the TV.

(Only LA62**, LA64**, LA66**, LA71**, LN57**­ZE/ZK, LN61**, LN65**)

Cable Holder

Cable Management

(Only LA69**, LA74**)

Cable Holder

(Only LN57**-ZA)

1 Gather and bind the cables with the Cable

Holder.

Cable Holder

CAUTION

yDo not move the TV by holding the cable

holders, as the cable holders may break,
and injuries and damage to the TV may
occur.

Cable Management

MAKING CONNECTIONS

A-7

MAKING CONNECTIONS

This section on MAKING CONNECTIONS mainly
uses diagrams for the 47LA660S models.

Antenna connection

ANTENNA/

CABLE IN

English

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

NOTE

yUse a signal splitter to use more than 2

TVs.

yIf the image quality is poor, install a signal

amplifier properly to improve the image
quality.

yIf the image quality is poor with an

antenna connected, try to realign the
antenna in the correct direction.

yAn antenna cable and converter are not

supplied.

ySupported DTV Audio: MPEG, Dolby

Digital, Dolby Digital Plus, HE-AAC

Français

Connectez la TV à une prise d’antenne murale

avec un câble RF (75 Ω).

REMARQUE

yUtilisez un séparateur de signaux pour

utiliser plus de deux téléviseurs.

ySi la qualité d’image est mauvaise,

installez correctement un amplificateur

de signaux pour l’améliorer.

ySi vous utilisez une antenne et que la

qualité d’image est mauvaise, essayez

de réaligner l’antenne dans la bonne

direction.

yLe câble et le convertisseur d’antenne ne

sont pas fournis.

yTechnologies audio TNT prises en

charge : MPEG, Dolby Digital, Dolby

Digital Plus, HE-AAC

●

●

●

●

●

A-8

MAKING CONNECTIONS

Satellite dish connection

(Only satellite models)

13/18 V

700 mA Max

LNB

Satellite IN

English

Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).

Français

Connectez la TV à une parabole satellite ou à
une prise satellite à l’aide d’un câble satellite RF
(75 Ω).

HDMI connection

(MHL)

3

DVD/ Blu-Ray / HD Cable
Box / HD STB / PC

(*Not Provided)

HDMI

English

Transmits the digital video and audio signals
from an external device to the TV. Connect the
external device and the TV with the HDMI cable
as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.

/DVI IN

2

(ARC)

1

NOTE

yIt is recommended to use the TV with

the HDMI connection for the best image
quality.

yUse the latest High Speed HDMI™ Cable

with CEC (Customer Electronics Control)

function.

yHigh Speed HDMI™ Cables are tested

to carry an HD signal up to 1080p and
higher.

ySupported HDMI Audio format : Dolby

Digital, DTS, PCM (Up to 192 KHz, 32KH
z/44.1KHz/48KHz/88KHz/96KHz/176KHz

/192KHz)

MAKING CONNECTIONS

A-9

Français

Permet de transmettre les signaux vidéo et audio
numériques d’un périphérique externe vers la TV.
Connectez le périphérique externe et la TV avec
le câble HDMI comme indiqué sur l’illustration
suivante.
Choisissez un port d’entrée HDMI pour établir la
connexion. Peu importe le port que vous utilisez.

REMARQUE

yPour obtenir une meilleure qualité

d’image, il est recommandé d’utiliser la
TV avec une connexion HDMI.

yUtilisez le tout nouveau câble haut débit

HDMI™ avec la fonction CEC (contrôles

électroniques client).

yLes câbles HDMI™ haut débit sont testés

pour transporter un signal HD de 1080p
ou supérieur.

yFormats audio HDMI pris en charge :

Dolby Digital, DTS, PCM (jusqu’à
192 KHz, 32KHz/44,1KHz/48KHz/88KHz/

96KHz/176KHz/192KHz)

ARC (Audio Return Channel)

English

An external audio device that supports

y

SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
When connected with a high-speed

y

HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.

Français

Un périphérique audio externe qui prend

y

en charge les technologies SIMPLINK et
ARC doit être connecté au port HDMI/DVI
IN 1 (ARC).
Si vous reliez un câble HDMI haut débit,

y

le périphérique audio externe qui prend en
charge les sorties ARC, prend également
en charge la sortie optique SPDIF sans
câble audio optique supplémentaire, ainsi
que la fonction SIMPLINK.

y

y

●

●

●

●

A-10

MAKING CONNECTIONS

DVI to HDMI connection

/DVI IN

WHITE

RED

AUDIO OUT

L

L/MONO

(*Not Provided)

Français

Permet de transmettre les signaux vidéo d’un
périphérique externe vers la TV. Connectez le
périphérique externe et la TV avec le câble DVI­HDMI comme indiqué sur l’illustration suivante.
Pour émettre un signal audio, raccordez un câble

(MHL)

3

2

audio.
Choisissez un port d’entrée HDMI pour établir la
connexion. Peu importe le port que vous utilisez.

REMARQUE

ySelon la carte graphique, le mode DOS

peut ne pas fonctionner si vous utilisez
un câble pour établir la connexion HDMI­DVI.

(ARC)

1

DVI OUT

yLors de l’utilisation du câble HDMI/DVI,

seule une liaison unique peut être prise
en charge.

●

●

DVD/ Blu-Ray / HD Cable Box / PC

English

Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.

NOTE

yDepending on the graphics card, DOS

mode may not work if a HDMI to DVI Cable
is in use.

yWhen using the HDMI/DVI cable, only

Single link is supported.

MAKING CONNECTIONS

VIDEO

AUDIO

VIDEO

AUDIO

COMPONENT IN

L

O

O

/M

2

A-11

Component connection

WHITE

(*Not

Provided)

RED

RED

BLUE

GREEN

Français

Permet de transmettre les signaux audio et vidéo
analogiques d’un périphérique externe vers la
TV. Connectez le périphérique externe et la TV
avec un câble composante comme indiqué sur
l’illustration suivante.

REMARQUE

ySi les câbles sont mal installés, l’image

peut s’afficher en noir et blanc ou avec

des couleurs de mauvaise qualité.

y

DVD / Blu-Ray / HD Cable Box

English

Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.

NOTE

yIf cables are not installed correctly, it

could cause this image to display in black
and white or with distorted colours.

A-12

MAKING CONNECTIONS

Composite connection

COMPONENT IN

L

L/MONO

RED

(*Not Provided)

AUDIOL R L

DVD/ Blu-Ray / HD Cable Box / VCR

English

Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the composite cable as
shown.

Français

Permet de transmettre les signaux audio et vidéo
analogiques d’un périphérique externe vers la
TV. Connectez le périphérique externe et la TV
avec le câble composite comme indiqué sur
l’illustration suivante.

WHITE

RED

( )

MONO

AV 2 IN

WHITE

VIDEO

YELLOW

YELLOW

MHL connection

(MHL)

3

/DVI IN

MHL passive cable

(*Not Provided)

Mobile phone

English

Mobile High-denition Link (MHL) is an interface

for transmitting digital audiovisual signals from
mobile phones to television sets.

NOTE

Connect the mobile phone to the HDMI/

y

DVI IN 3 (MHL) port to view the phone

screen on the TV.
The MHL passive cable is needed to

y

connect the TV and a mobile phone.
This only works for the MHL-enabled

y

phone.
Some applications can be operated by the

y

remote control.
For some mobile phones supporting MHL,

y

you can control with the magic remote
control.
Remove the MHL passive cable from the

y

TV when:

- the MHL function is disabled

- your mobile device is fully charged in
standby mode

Français

Mobile High-denition Link (MHL) est une

interface qui permet de transmettre des signaux
audiovisuels numériques depuis des téléphones
portables vers des téléviseurs.

MAKING CONNECTIONS

A-13

REMARQUE

Connectez le téléphone portable au

y

port d’entrée HDMI/DVI IN 3 (MHL)

pour afficher l’écran du téléphone sur le
téléviseur.
Le câble passif MHL sert à connecter la

y

TV à un téléphone portable.
Cette fonctionnalité est uniquement

y

disponibles sur les téléphones prenant en
charge la connexion MHL.
Certaines applications peuvent être

y

utilisées depuis la télécommande.
Vous pouvez utiliser la télécommande

y

Magic sur certains téléphones portables
prenant en charge la connexion MHL.
Retirez le câble passif MHL du téléviseur

y

uniquement si :

- la fonction MHL est désactivée,

- votre périphérique mobile est
complètement chargé et en mode veille
ou

●

●

●

●

●

●

A-14

MAKING CONNECTIONS

Audio connection

OPTICAL DIGITAL AUDIO

(*Not Provided)

OPTICAL

Digital Audio System / Sound Bar(Only

42/47LA669*)

English

You may use an optional external audio system
instead of the built-in speaker.

Digital optical audio connection

OUT

AUDIO IN

Français

Vous pouvez utiliser un système audio externe en
option à la place d’un haut-parleur intégré.

Connexion audio optique
numérique

Permet de transmettre un signal audio numérique
de la TV au périphérique externe. Connectez le
périphérique externe et la TV avec le câble audio
optique comme indiqué sur l’illustration suivante.

REMARQUE

yNe regardez pas dans le port de sortie

optique. Le rayon laser risquerait de vous
abîmer la vue.

yLa fonction Audio avec ACP (protection

copie audio) peut bloquer la sortie audio

numérique.

Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.

NOTE

yDo not look into the optical output port.

Looking at the laser beam may damage
your vision.

yAudio with ACP (Audio Copy Protection)

function may block digital audio output.

●

●

MAKING CONNECTIONS

A-15

USB connection

3

2

USB INHDD IN

1

HDD

English

Connect a USB storage device such as a USB

ash memory, external hard drive, or a USB

memory card reader to the TV and access the
Smart Share menu to use various multimedia

les.

NOTE

ySome USB Hubs may not work. If a USB

device connected using a USB Hub is not
detected, connect it to the USB port on
the TV directly.

yConnect the external power source if your

USB is needed.

HUB

USB

(*Not Provided)

Français

Connectez un périphérique de stockage USB
comme une clé USB, un disque dur externe ou
une carte mémoire USB à la TV et accédez au

menu Smart Share pour utiliser divers chiers

multimédia.

REMARQUE

yCertains ports USB peuvent ne pas

fonctionner. Si un appareil USB branché
sur un port USB n’est pas détecté alors
connectez-le directement au téléviseur.

yConnectez la source d’alimentation

externe si une connexion USB est
nécessaire.

●

●

A-16

MAKING CONNECTIONS

CI module connection

(*Not Provided)

English

View the encrypted (pay) services in digital

TV mode. This feature is not available in all
countries.

Français

Afchez les services cryptés (payants) en mode

TV numérique. Cette fonction n’est pas disponible
dans tous les pays.

REMARQUE

yVérifiez si le module CI est inséré dans

le bon sens dans la fente de la carte
PCMCIA. Si le module est mal inséré, la
TV pourrait subir des dommages ainsi
que la fente de la carte PCMCIA.

ySi le téléviseur n’affiche aucune vidéo et

n’émet aucun son lorsque l’entrée CI+
CAM est connectée, contactez votre
opérateur de service terrestre/satellite/
câble.

y

y

NOTE

yCheck if the CI module is inserted into the

PCMCIA card slot in the right direction. If
the module is not inserted properly, this
can cause damage to the TV and the
PCMCIA card slot.

yIf the TV does not display any video

and audio when CI+ CAM is connected,
please contact to the Terrestrial/Cable/
Satellite Service Operator.

MAKING CONNECTIONS

A-17

Headphone connection

H/P OUT

English

Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.

NOTE

yAUDIO menu items are disabled when

connecting a headphone.

yWhen changing AV MODE with a

headphone connected, the change
is applied to video but not to audio.

(Depending on model)

yOptical Digital Audio Out is not available

when connecting a headphone.
yHeadphone impedance: 16 Ω
yMax audio output of headphone: 9 mW to

15 mW
yHeadphone jack size: 0.35 cm

(*Not Provided)

Français

Transmet le signal du casque de la TV au
périphérique externe. Connectez le périphérique
externe et la TV avec le casque comme indiqué
sur l’illustration suivante.

REMARQUE

yLes éléments du menu SON sont

désactivés lorsque vous branchez un
casque.

ySi vous modifiez le MODE AV avec un

casque connecté, la modification est
appliquée à la vidéo mais pas au son.

(selon le modèle)

yLa sortie audio numérique optique n’est

pas disponible lorsque vous branchez un

casque.
yImpédance du casque : 16 Ω
ySortie audio max. du casque : 9 mW à

15 mW
yTaille de la prise casque : 0,35 cm

●

●

●

●

●

●

A-18

AV1
IN/OUT

MAKING CONNECTIONS

Euro Scart connection

(*Not Provided)

English

Transmits the video and audio signals from an ex­ternal device to the TV set. Connect the external
device and the TV set with the euro scart cable
as shown.

Output

Type

Current
input mode

Digital TV Digital TV

Analogue TV, AV

HDMI

1 TV Out : Outputs Analogue TV or Digital TV

signals.

AV1

(TV Out

Analogue TVComponent

1

)

Français

Transmet les signaux audio et vidéo d’un ap­pareil externe au téléviseur. Raccordez l’appareil
externe et le téléviseur à l’aide d’un câble péritel
comme illustré ci-dessous.

Type de sortie

AV1

Mode

(sortie TV1)

d'entrée actuel

TV numérique TV numérique

TV analogique, AV

TV analogiqueComposant

HDMI

1 Sortie TV : sortie de signaux en mode TV

analogique ou en mode TV numérique.

REMARQUE

yTous les câbles Euro scart utilisés doivent

être des câbles de signal blindés.

yQuand le mode 3D est sélectionné sur la

TV numérique, seuls les signaux de sortie
2D peuvent être émis via le câble péritel.

(modèles 3D uniquement)

NOTE

yAny Euro scart cable used must be signal

shielded.

yWhen watching digital TV in 3D imaging

mode, only 2D out signals can be output
through the SCART cable. (Only 3D

models)

HDMI

MAKING CONNECTIONS

A-19

English

Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.

NOTE

yThe external device connection may differ

from the model.
yConnect external devices to the TV

regardless of the order of the TV port.
yIf you record a TV program on a DVD

recorder or VCR, make sure to connect

the TV signal input cable to the TV

through a DVD recorder or VCR. For

more information of recording, refer to

the manual provided with the connected

device.
yRefer to the external equipment’s manual

for operating instructions.
yIf you connect a gaming device to the TV,

●

●

use the cable supplied with the gaming

device.
yIn PC mode, there may be noise

associated with the resolution, vertical

pattern, contrast or brightness. If noise is

present, change the PC output to another

resolution, change the refresh rate to

another rate or adjust the brightness and

contrast on the PICTURE menu until the

picture is clear.
yIn PC mode, some resolution settings

may not work properly depending on the

graphics card.

A-20

MAKING CONNECTIONS

Français

Connectez divers périphériques externes à la
TV et changez de mode de source d’entrée pour
sélectionner un périphérique externe. Pour en
savoir plus sur le raccordement d’un périphérique
externe, reportez-vous au manuel fourni avec ce
dernier.
Les périphériques externes disponibles sont les
suivants : récepteurs HD, lecteurs DVD, VCR,
systèmes audio, périphériques de stockage USB,
PC, consoles de jeu et autres périphériques
externes.

REMARQUE

yLe raccordement du périphérique externe

peut différer du modèle.

yConnectez des périphériques externes à

la TV sans tenir compte de l’ordre du port
TV.

ySi vous enregistrez un programme

TV sur un enregistreur de DVD ou un
magnétoscope, veillez à raccorder le
câble de source d’entrée du signal de la
TV à la TV via un enregistreur de DVD
ou un magnétoscope. Pour en savoir
plus sur l’enregistrement, reportez-vous
au manuel fourni avec le périphérique
connecté.

yVeuillez consulter le manuel de

l’équipement externe contenant les
instructions d’utilisation.

ySi vous connectez une console de jeu

à la TV, utilisez le câble fourni avec la
console de jeu.

yEn mode PC, un bruit peut être associé

à la résolution, au modèle vertical, au
contraste ou à la luminosité. En présence
de bruit, changez la résolution de la
sortie PC, changez le niveau du taux de
rafraîchissement ou réglez la luminosité
et le contraste dans le menu IMAGE
jusqu’à ce que l’image soit nette.

yEn mode PC, certains réglages de la

résolution peuvent ne pas fonctionner
correctement en fonction de la carte
graphique utilisée.

●

●

●

●

●

●

●

OWNER’S MANUAL

*

LED TV

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain
it for future reference.

www.lg.com

2

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE

NOTICE

4 SAFETY INSTRUCTIONS

10 - Viewing 3D Imaging (Only 3D models)

12 INSTALLATION PROCEDURE

12 ASSEMBLING AND PREPARING

12 Unpacking
15 Separate purchase
16 Parts and buttons
17 Lifting and moving the TV
18 Mounting on a table
20 Mounting on a wall

22 REMOTE CONTROL

24 MAGIC REMOTE CONTROL

FUNCTIONS

25 Registering Magic Remote Control
25 How to use Magic Remote Control

25 Precautions to Take when Using the

Magic Remote Control

26 USING THE USER GUIDE

28 EXTERNAL CONTROL DEVICE

SETUP

28 SPECIFICATIONS

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a
possibility of accident or death.

27 MAINTENANCE

27 Cleaning your TV

27 - Screen, frame, cabinet and stand
27 - Power cord

27 TROUBLESHOOTING

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product may
be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE

3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that

plays DivX video. Visit divx.com for more information and software tools to

convert your les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be

registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your
registration.

“DivX Certied® to play DivX® video up to HD 1080p, including premium

content.”

“DivX®, DivX Certied® and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS

2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.

ENGLISH

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[e-mail]. This offer is valid for three (3) years from the date on which you purchased the
product.

4

SAFETY INSTRUCTIONS

ENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and/or remote control in the following environments:

y

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce
heat

- Near kitchen counters or humidifiers where they can easily be exposed
to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product
deformation.

Do not place the product where it might be exposed to dust.

y

This may cause a fire hazard.

Mains Plug is the TV connecting/disconnecting device to AC mains electric

y

supply.This plug must remain readily attached and operable when TV is in
use.

Do not touch the power plug with wet hands. Additionally, if the cord pin is

y

wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.

Make sure to connect Mains cable to compliant AC mains socket with

y

Grounded earth pin. (Except for devices which are not grounded on earth.)
Otherwise possibility you may be electrocuted or injured.

Insert power cable plug completely into wall socket otherwise if not secured

y

completely into socket, fire ignition may break out.

Ensure the power cord does not come into contact with hot objects such as

y

a heater.
This may cause a fire or an electric shock hazard.

Do not place a heavy object, or the product itself, on power cables.

y

Otherwise, this may result in fire or electric shock.

SAFETY INSTRUCTIONS

Desiccant

5

Bend antenna cable between inside and outside building to prevent rain

y

from flowing in.
This may cause water damaged inside the Product and could give an
electric shock.

When mounting TV onto wall make sure to neatly install and isolate cabling

y

from rear of TV as to not create possibility of electric shock /fire hazard.

Do not plug too many electrical devices into a single multiple electrical

y

outlet.
Otherwise, this may result in fire due to over-heating.

Do not drop the product or let it fall over when connecting external devices.

y

Otherwise, this may result in injury or damage to the product.

Keep the anti-moisture packing material or vinyl packing out of the reach of

y

children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake,
force the patient to vomit and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the reach of children.

Do not let your children climb or cling onto the TV.

y

Otherwise, the TV may fall over, which may cause serious injury.

Dispose of used batteries carefully to ensure that a small child does not

y

consume them.
Please seek Doctor- Medical Attention immediately if child consumes
batteries.

ENGLISH

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

y

screwdriver) between power cable plug and input Wall Socket while it is
connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal. You may be
electrocuted.
(Depending on model)

Do not put or store inflammable substances near the product.

y

There is a danger of combustion/explosion or fire due to careless handling
of the inflammable substances.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into

y

the product, or inflammable objects such as paper and matches. Children
must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into
the product, unplug the power cord and contact the service centre.

Do not spray water on the product or scrub with an inflammable substance

y

(thinner or benzene). Fire or electric shock accident can occur.

6

SAFETY INSTRUCTIONS

ENGLISH

Do not allow any impact, shock or any objects to fall into the unit, and do

y

not drop anything onto the screen.
You may be injured or the product can be damaged.

Never touch this product or antenna during a thunder or lighting storm.

y

You may be electrocuted.

Never touch the wall outlet when there is leakage of gas, open the windows

y

and ventilate.
It may cause a fire or a burn by a spark.

Do not disassemble, repair or modify the product at your own discretion.

y

Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.

If any of the following occur, unplug the product immediately and contact

y

your local service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

Unplug the TV from AC mains wall socket if you do not intend to use the TV

y

for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can
cause electric leakage/shock/fire.

Apparatus shall not be exposed to dripping or splashing and no objects

y

filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power

y

lines to keep the former from touching the latter even when the antenna

falls.

This may cause an electric shock.

SAFETY INSTRUCTIONS

7

Do not install the product on places such as unstable shelves or inclined

y

surfaces. Also avoid places where there is vibration or where the product
cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or
damage to the product.

If you install the TV on a stand, you need to take actions to prevent the

y

product from overturning. Otherwise, the product may fall over, which may
cause injury.

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional

y

parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult with a qualified service technician. If

y

not installed by a qualified technician, this may create a fire hazard or an
electric shock hazard.

We recommend that you maintain a distance of at least 2 to 7 times the

y

diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.

Only use the specified type of battery.

y

This could cause damage to the remote control.

Do not mix new batteries with old batteries.

y

This may cause the batteries to overheat and leak.

ENGLISH

Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight ,

y

open fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.

y

Make sure there are no objects between the remote control and its sensor.

y

Signal from Remote Control can be interrupted due to external/internal

y

lighting eg Sunlight, fluorescent lighting.

If this occurs turn off lighting or darken viewing area.

When connecting external devices such as video game consoles, make

y

sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage
the product.

Do not turn the product On/Off by plugging-in or unplugging the power plug

y

to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.

8

SAFETY INSTRUCTIONS

ENGLISH

Please follow the installation instructions below to prevent the product from

y

overheating.

- The distance between the product and the wall should be more than
10 cm.

- Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

Take care not to touch the ventilation openings when watching the TV for

y

long periods as the ventilation openings may become hot. This does not
affect the operation or performance of the product.

Periodically examine the cord of your appliance, and if its appearance indicates damage or

y

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.

Prevent dust collecting on the power plug pins or outlet.

y

This may cause a fire hazard.

Protect the power cord from physical or mechanical abuse, such as being

y

twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the
appliance.

Do not press strongly upon the panel with a hand or sharp object such

y

as nail, pencil or pen, or make a scratch on it, as it may cause damage to
screen.

Avoid touching the screen or holding your finger(s) against it for long

y

periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.

When cleaning the product and its components, unplug the power first and

y

wipe it with a soft cloth. Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe with a wet cloth. Never use
glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage
(deformation, corrosion or breakage).

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power

y

source even if you turn off this unit by SWITCH.

When unplugging the cable, grab the plug and unplug it, by pulling at the

y

plug.

Don’t pull at the cord to unplug the power cord from the power board, as
this could be hazardous.

When moving the product, make sure you turn the power off first. Then,

y

unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard
or cause electric shock.

SAFETY INSTRUCTIONS

9

When moving or unpacking the product, work in pairs because the product

y

is heavy.
Otherwise, this may result in injury.

Contact the service centre once a year to clean the internal parts of the

y

product.
Accumulated dust can cause mechanical failure.

Refer all servicing to qualified service personnel. Servicing is required when

y

the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

If the product feels cold to the touch, there may be a small “flicker” when it

y

is turned on. This is normal, there is nothing wrong with product.

The panel is a high technology display product with resolution of two million

y

to six million pixels. You may see tiny black dots and/or brightly coloured
dots (red, blue or green) at a size of 1 ppm on the panel. This does not
indicate a malfunction and does not affect the performance and reliability of
the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.

You may find different brightness and color of the panel depending on your

y

viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.

ENGLISH

Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video

y

game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders
of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.

Generated Sound

y

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise
is generated from a high-speed switching circuit, which supplies a large amount of current to
operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.

10

SAFETY INSTRUCTIONS

ENGLISH

Viewing 3D Imaging (Only 3D models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a
long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

ySome users may experience a seizure or other abnormal symptoms when they are exposed to a

ashing light or particular pattern from 3D contents.

yDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc.

y3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble

sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.

yIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until

the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or
fatigue.