LG 50UN7300PUC, 86UN8570PUB, 75UN7100PUD, 75UN8000PUB, 43UN7300PUC Owner's Manual [es]
...
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future
reference.
43UN7300PUF
43UN7300PUC
43UN7300AUD
43UN7300PUD
43UN7100PUA
43UN7000PUB
43UN6950ZUA
43UN6951ZUA
49UN7300PUC
49UN7300PUF
49UN7300AUD
49UN7300PUB
49UN7100PUA
49UN7000PUB
50UN8050PUD
50UN8000PUB
50UN7300PUF
50UN7300PUC
50UN7300AUD
50UN7300PUB
50UN7000PUC
50UN6950ZUF
50UN6951ZUF
55UN8050PUD
55UN8000PUB
55UN7300PUF
55UN7300PUC
55UN7300AUD
55UN7300PUB
55UN7310PUC
55UN7100PUA
55UN7000PUB
55UN6950ZUA
55UN6951ZUA
*MFL71437834*
(2011-REV05)
60UN7300PUA
60UN7310PUA
60UN7000PUB
60UN6950ZUA
60UN6951ZUA
65UN8500PUI
65UN8500AUJ
65UN8050PUD
65UN8000PUB
65UN7300PUF
65UN7300PUC
65UN7300AUD
65UN7300PUB
65UN7310PUC
65UN7100PUA
65UN6950ZUA
65UN6951ZUA
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
70UN6950ZUA
70UN7370PUC
70UN7370AUD
70UN7370PUB
70UN7100PUA
70UN7070PUA
75UN8570PUC
75UN7370PUE
75UN8000PUB
75UN8570AUD
75UN7370AUH
75UN7370PUB
75UN7100PUD
75UN7070PUC
75UN6950ZUD
75UN6951ZUD
75UN6970PUD
82UN8570PUC
82UN8570PUB
82UN8570AUD
82UN8070PUD
86UN8570PUC
86UN8570PUB
86UN8570AUD
Important Safety Instruction
ENGLISH_Index
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
2
Warning! Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s
enclosure that may be of sucient magnitude to constitute a risk
of electric shock to persons.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• Do not place the TV and/or remote control in the following
environments:
- Keep the product away from direct sunlight.
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that
produce heat.
- Near kitchen counters or humidiers where they can easily be
exposed to steam or oil.
- An area exposed to rain or wind.
- Do not expose to dripping or splashing and do not place objects
lled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
- Near ammable objects such as gasoline or candles, or expose
the TV to direct air conditioning.
- Do not install in excessively dusty places.
Otherwise, this may result in re, electric shock, combustion/
explosion, malfunction or product deformation.
• Ventilation
- Install your TV where there is proper ventilation. Do not install in
a conned space such as a bookcase.
- Do not install the product on a carpet or cushion.
- Do not block or cover the product with cloth or other materials
while unit is plugged in.
• Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot.
• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device.
• Do not move the TV whilst the Power cord is plugged in.
• Do not use a damaged or loosely tting power cord.
• Be sure to grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
• Do not connect too many devices to the same AC power outlet as
this could result in re or electric shock.
• Disconnecting the Device from the Main Power
- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
• Outdoor Antenna Grounding (Can dier by country):
- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,
ANSI/NFPA 70
ENGLISH_Index
3
• Grounding (Except for devices which are not grounded.)
- TV with a three-prong grounded AC plug must be connected to
a three-prong grounded AC outlet. Ensure that you connect the
ENGLISH_Index
earth ground wire to prevent possible electric shock.
• Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted.
• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a re may break out.
• Do not insert metallic or inammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.
• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.
• If any of the following occur, unplug the product
immediately and contact your local customer service.
- The product has been damaged.
- If water or another substance enters the product (like an AC
adapter, power cord, or TV).
- If you smell smoke or other odors coming from the TV
- When lightning storms or when unused for long periods of time.
Even the TV is turned o by remote control or button, AC power
source is connected to the unit if not unplugged in.
• Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction.
• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental re or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modication could void the user’s authority to
operate this product.
• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in re, electric shock,
malfunction, or product damage.
• Never disassemble the AC adapter or power cord. This may result in
re or electric shock.
• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
• To reduce the risk of re or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust o.
• Batteries
- Store the accessories (battery, etc.) in a safe location out of the
reach of children.
- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a re. Batteries should
not be exposed to excessive heat.
- Caution: Risk of re or explosion if the battery is replaced by an
incorrect type.
• Moving
- When moving, make sure the product is turned o, unplugged,
and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, re
hazard or injury.
• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
causedamage to screen.
• Cleaning
- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.
4
Preparing
A
A
<
A
B
Optional Extras
• When the TV is turned on for the rst time after being shipped
from the factory, initialization of the TV may take approximately
one minute.
• Image shown may dier from your TV.
• Your TV’s OSD (On Screen Display) may dier slightly from that
shown in this manual.
• The available menus and options may dier from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / o button,
turning o the device and unplugging the power cord.
• The items supplied with your product may vary depending upon
the model.
• Product specications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7
inches) width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB ash drive does not t into your TV’s USB port.
• Use a certied cable with the HDMI logo attached. If you do not use
a certied HDMI cable, the screen may not display or a connection
error may occur.
• Recommended HDMI cable types (3 m (9.84 feet) or less)
- Ultra High Speed HDMI®/™ cable
B
B
*A < 10 mm (0.39 inches)
18 mm (0.7 inches)
*B
Optional extras can be changed or modied for quality improvement
without any notication. Contact your dealer for buying these items.
These devices work only with certain models.
The model name or design may be changed due to the manufacturer’s
circumstances or policies.
Magic Remote Control
(Depending upon model)
MR20GA
Check whether your TV model supports Bluetooth in the Wireless
Module Specication to verify whether it can be used with the Magic
Remote.
Wall Mounting Bracket
(Depending upon model)
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
ENGLISH_Index
43/50UN69*
Model
VESA (A x B) (mm)
Standard screw M6 M6
Number of screws 4 4
Wall mount bracket
(optional)
43/50UN70*
43UN71*
43/50UN73*
50UN80*
200 x 200 300 x 300
LSW240B
MSW240
55UN69*
49/55UN70*
49/55UN71*
49/55UN73*
55UN80*
OLW480B
MSW240
5
60/65UN69*
60UN70*
Model
ENGLISH_Index
VESA (A x B) (mm)
Standard screw M6 M8
Number of screws 4 4
Wall mount bracket
(optional)
65UN71*
60/65UN73*
65UN80*
65UN85*
300 x 300 600 x 400
OLW480B LSW640B
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV
from being scratched or damaged and for safe transportation regardless
of its type and size.
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face away from you to
avoid damage.
• Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grille area.
70/75UN69*
70/75UN70*
70/75UN71*
70/75UN73*
75/82UN80*
75/82/86UN85*
• Use at least two people to move a large TV.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
• When transporting the TV, do not expose the TV to jolts or
excessive vibration.
• When transporting the TV, keep the TV upright; never turn the TV
on its side or tilt towards the left or right.
• When handling the TV, be careful not to damage the protruding
buttons.
• Avoid touching the screen at all times, as this may result in
damage to the screen.
• Do not place the product on the oor with its front facing
down without padding. Failure to do so may result in
damage to the screen.
• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or at surface to protect
the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a minimum of 10 cm (4 inches) space from the wall for
proper ventilation.
10 cm
(4 inches)
10 cm
(Depending upon model)
2 Connect the power cord to a wall outlet.
10 cm
10 cm
10 cm
6
• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product.
(Doing so may damage the product.)
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the warranty.
• Make sure that the screws are fastened tightly. (If they
are not fastened securely enough, the TV may tilt forward
after being installed.)
• Do not fasten the screws with excessive force otherwise
they may strip and become loose.
Securing TV to the Wall
(Depending upon model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts rst.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the at surface.
• Use a platform or cabinet that is strong and large enough to
support the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting to the Wall
An optional wall mount can be used with your LG Television. Consult
with your local dealer for a wall mount that supports the VESA
standard used by your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount bracket on a solid
wall perpendicular to the oor. If you are attaching the TV to other
building materials, please contact qualied personnel to install the
wall mount. Detailed instructions will be included with the wall mount.
We recommend that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables. When you do not use
LG’s wall mount bracket, use a wall mount bracket where the device is
adequately secured to the wall with enough space to allow connectivity
to external devices. If you are using a non-adjustable mount, attach the
mount to the wall. Attach the cables to the TV rst, then attach the TV
to the mount.
10 cm (4 inches)
10 cm
(Depending upon model)
• Remove the stand before installing the TV on a wall
mount by performing the stand attachment in reverse.
• For more information of screws and wall mount bracket,
refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), x it carefully so as
not to drop.
• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
10 cm
10 cm
10 cm
ENGLISH_Index
7
• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the inux of
dust and insects, (Depending upon model).
ENGLISH_Index
Stand hole
Connections
You can connect various external devices to the TV. For more
information on external device’s connection, refer to the manual
provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to
the following. The illustrations may dier from the actual items and an
RF cable is optional.
• Make sure not to bend the copper wire of the RF cable.
Copper wire
• Complete all connections between devices, and then connect the
power cord to the power outlet to prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby Digital
• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts
directly because the related standards have not been conrmed.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
HDMI
• When connecting the HDMI cable, the product and external devices
should be turned o and unplugged.
• HDMI Audio Supported Format:
(Depending upon model)
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
• [Picture] [Additional Settings] [HDMI Ultra
HD Deep Color]
(Except for UN85* , 82UN80*)
- On: Support 4K @ 50 / 60 Hz (4:4:4, 4:2:2, 4:2:0)
- O: Support 4K @ 50 / 60 Hz (4:2:0)
(Only UN85* , 82UN80*)
- On: Support 4K @ 50 / 60 Hz (4:4:4, 4:2:2, 4:2:0),
<3,4 port Only> 4K @ 100 / 120 Hz (4:4:4, 4:2:2, 4:2:0)
- O: Support 4K @ 50 / 60 Hz (4:2:0)
If the device connected to Input Port also supports Ultra HD Deep
Color, your picture may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case, change the TV’s
[HDMI Ultra HD Deep Color] setting to o.
- This feature is available only on certain models which support
HDMI Ultra HD Deep Color.
External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming devices,
and other external devices. For more information on external device’s
connection, refer to the manual provided with each device.
• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information about recording, refer to the
manual provided with the connected device.
• The external device connections shown may dier slightly from
illustrations in a manual.
• Connect external devices to the TV regardless about the order of
the TV port.
8
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• Refer to the external equipment’s manual for operating
instructions.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the [Picture]
menu until the picture is clear. Depending upon the graphics card,
some resolution settings may not allow the image to be positioned
on the screen properly.
• Some USB Hubs may not work. If a USB device connected through
a USB Hub is not detected, connect it directly to the USB port on
the TV.
• When connecting via a wired LAN, it is recommended to use a CAT
7 cable.
• The TV may be capable of operating without a set-top-box from a
multichannel video programming distributor (MVPD).
Using Button
You can simply operate the TV functions, using the button.
Basic functions
ENGLISH_Index
Remote RS-232C setup
To obtain the RS-232C external control setup information, please
visit www.lg.com. Download and read the manual, (Depending upon
model).
• Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or
damage to the product.
• When connecting external devices such as video game
consoles, make sure the connecting cables are long
enough. Otherwise, the product may fall over, which may
cause injury or damage the product.
Power On (Press)
Power O 1 (Press and Hold)
Menu Control (Press 2)
Menu Selection (Press and Hold 3)
1 All running apps will close.
2 You can access and adjust the menu by pressing the button when
TV is on.
3 You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the button one time. You can adjust
the Menu items using the button.
Turns the power o.
Changes the input source.
Adjusts the volume level.
Scrolls through the saved channels.
9
Using Remote Control
To use the button, press and hold for more than 1 second.
(Depending upon model)
ENGLISH_Index
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To install batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the and ends to the label inside the compartment,
and close the battery cover. To remove the batteries, perform the
installation actions in reverse. This remote uses infrared light. When in
use, it should be pointed in the direction of the TV’s remote sensor.
Make sure to point the remote control toward the remote control sensor
on the TV.
1 1
1
(POWER) Turns the TV on or o.
Returns to the last TV channel.
(SEARCH) Check for recommended content. (Some
recommended services may not be available in some countries.)
Shows the search mode.
Activates or deactivates the subtitles.
(Q. Settings) Accesses the Quick Settings.
(INPUT) Changes the input source.
Number button Enters numbers.
Accesses the [Quick Help].
(DASH) Inserts a between numbers such as 2-1 and 2-2.
Accesses the saved channels list.
(MORE ACTIONS) Displays more remote control functions.
Edits QUICK ACCESS.
- QUICK ACCESS is a feature that allows you to enter a specied app
or Live TV directly by pressing and holding the number buttons.
Adjusts the volume level.
Accesses your favorite channel list.
Displays the program event according to time scheduler.
(MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved channels.
Moves to the previous or next screen.
1
Streaming Service buttons Connects to the Video Streaming
Service.
(HOME) Accesses the Home menu.
(HOME) Shows the previous history.
Returns to the previous screen.
Clears on-screen displays and returns to last input viewing.
Navigation button (up / down / left / right) Scrolls through menus
or options.
(OK) Selects menus or options and conrms your input.
Shows information on the current program.
Enables SAP (Secondary Audio Program) Feature.
Starts to record. (Only Time Machine
(Control buttons) Control buttons for media
contents.
, , , These access special functions in some menus.
Ready
supported model)
(Some buttons and services may not be provided depending upon
models or regions.)
10
Using Magic Remote Control
To use the button, press and hold for more than 1 second.
(Depending upon model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
When the message [Magic remote battery is low. Please change the
battery.] is displayed, replace the batteries.
To install batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse. This remote uses infrared light. When
in use, it should be pointed in the direction of the TV’s remote sensor.
1
1
(Some buttons and services may not be provided depending upon
models or regions.)
1
(POWER) Turns the TV on or o.
(STB POWER) You can turn your set-top box on or o by adding
the set-top box to the universal remote control for your TV.
Number buttons Enters numbers.
Accesses the [Quick Help].
(DASH) Inserts a between numbers such as 2-1 and 2-2.
Accesses the saved channels list.
(MORE ACTIONS) Displays more remote control functions.
Edits QUICK ACCESS.
- QUICK ACCESS is a feature that allows you to enter a specied app
or Live TV directly by pressing and holding the number buttons.
SAP(Secondary Audio Program) Feature can also be
enabled by pressing the button.
Adjusts the volume level.
(MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved channels.
(Voice recognition) Network connection is required to use the
voice recognition function.
Check for recommended content. (Some recommended services may
not be available in some countries.)
(Voice recognition) Speak while pressing and holding the
button to use the voice recognition feature.
(HOME) Accesses the Home menu.
(HOME) Shows the previous history.
(Q. Settings) Accesses the Quick Settings.
(Q. Settings) Displays the [All Settings] menu.
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change channels by using the wheel button.
(up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
(BACK) Returns to the previous screen.
(BACK) Clears on-screen displays and returns to last input
viewing.
Displays the program event according to time scheduler.
1
Streaming Service buttons Connects to the Video Streaming
Service.
(INPUT) Changes the input source.
(INPUT) Accesses the [Home Dashboard].
, , , These access special functions in some menus.
, (Control buttons) Controls media contents.
ENGLISH_Index
11
Registering Magic Remote Control
How to register the Magic Remote Control
ENGLISH_Index
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
How to deregister the Magic Remote Control
Press the (BACK) and (HOME) buttons at the same time, for
ve seconds, to unpair the Magic Remote with your TV.
* Press and hold the button for more than 5 seconds to disconnect
and re-register the Magic Remote at the same time.
• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in re,
personal injury, or ambient pollution.
• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, re or the like.
User Guide
For more information about this TV, read the USER GUIDE embedded in
the product.
• To open the USER GUIDE [Support] [User Guide]
Troubleshooting
Cannot control the TV with the remote control.
• Check if anything such as tape has been placed over the receiver.
• Check if there is any obstacle between the product and the remote
control.
• Replace the batteries with new fresh ones.
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the auto-o function is activated in the settings menu.
• If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.
12
Abnormal Display
• If the TV feels cold to the touch, there may be a small icker when
it is turned on. This is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing
as tiny red, green, or blue spots. However, they have no adverse
eect on the TV’s performance. Avoid touching the LCD screen or
holding your nger(s) against it for long periods of time. Doing so
may produce some temporary distortion eects on the screen.
• This panel is an advanced product that contains millions of pixels.
In a very few cases, you could see ne dots on the screen while
you’re viewing the TV. Those dots are deactivated pixels and do not
aect the performance and reliability of the TV.
• Displaying a still image for a prolonged period of time may cause
an image sticking. Avoid displaying a xed image on the TV screen
for a extended length of time.
Generated Sound
• Cracking noise A cracking noise that occurs when watching or
turning o the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.
• Electrical circuit humming/panel buzzing A low level noise
is generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
upon the product. This generated sound does not aect the
performance and reliability of the product.
• When cleaning the product, be careful not to allow any
liquid or foreign objects to enter the gap between the
upper, left or right side of the panel and the guide panel,
(Depending upon model).
ENGLISH_Index
• Make sure to wring any excess water or cleaner from the
cloth.
• Do not spray water or cleaner directly onto the TV screen.
• Make sure to spray just enough of water or cleaner onto a
dry cloth to wipe the screen.
13
Specications
Product specications may be changed without prior notice due to upgrade of product functions.
ENGLISH_Index
Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
• For information of the power supply and power consumption, refer to the label attached to the product.
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending upon the model or country, the typical power consumption may not be on label.
(Depending upon country)
Broadcasting Specifications
Television system ATSC / NTSC-M, 64 & 256 QAM
Program coverage
(Band)
External antenna
impedance
(Only 82UN80*, UN85*)
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz
5,150 to 5,725 MHz
5,725 to 5,850 MHz
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device
and the body.
FCC ID: BEJLGSBWAC92
IC: 2703H-LGSBWAC92
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
75 Ω
Wireless module (LGSBWAC92) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
18 dBm
18 dBm
18 dBm
Bluetooth
14
(Except for UN69*, UN70*, 82UN80*, UN85*)
Wireless module (LGSBWAC02) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz
5,150 to 5,725 MHz
5,725 to 5,850 MHz
Bluetooth
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 8.5 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device
and the body.
FCC ID: BEJLGSBWAC02
IC: 2703H-LGSBWAC02
(Only UN69*, UN70*)
Wireless module (LGSWFAC81) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz
5,150 to 5,725 MHz
5,725 to 5,850 MHz
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device
and the body.
FCC ID: BEJLGSWFAC81
IC: 2703H-LGSWFAC81
18.5 dBm
17 dBm
18.5 dBm
20 dBm
15 dBm
14.5 dBm
ENGLISH_Index
Environment condition
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity Less than 85 %
15
Open Source Software
Notice Information
ENGLISH_Index
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This oer is valid for a period of three years after our last shipment of
this product. This oer is valid to anyone in receipt of this information.
Regulatory
Licenses
(Magic Remote supported models only)
-
-
-
-
16
(1)
(2)
(3)
(4)
ENGLISH_Index
NOTE TO CABLE/TV INSTALLER
(For USA and Canada)
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, species that
the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
17
WARNING!
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly
ENGLISH_Index
to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the
television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the
supporting furniture.
• Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support.
• Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Symbols
Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
18
ENGLISH_Index
19
(Image shown may dier from your TV.)
ENGLISH_Index
A
F, G
MODELS
43UN7000PUB 975 (38.3) 627 (24.6) 216 (8.5) 574 (22.5) 80.3 (3.1) 8.4 (18.5) 8.3 (18.2)
43UN7100PUA
43UN6950ZUA
43UN6951ZUA
43UN7300PUC
43UN7300AUD
43UN7300PUD
43UN7300PUF 973 (38.3) 611 (24.0) 187 (7.3) 572 (22.5) 85.0 (3.3) 8.1 (17.8) 8.0 (17.6)
49UN7000PUB 1,108 (43.6) 708 (27.8) 231 (9) 649 (25.5) 79.5 (3.1) 11.1 (24.4) 10.9 (24)
49UN7100PUA 1,108 (43.6) 705 (27.7) 235 (9.2) 649 (25.5) 79.5 (3.1) 11.0 (24.2) 10.9 (24)
49UN7300PUB 1,110 (43.7) 704 (27.7) 232 (9.1) 650 (25.5) 81.1 (3.1) 11.3 (24.9) 11.1 (24.4)
49UN7300PUC
49UN7300AUD
49UN7300PUF 1,110 (43.7) 705 (27.7) 235 (9.2) 650 (25.5) 81.1 (3.1) 11.3 (24.9) 11.1 (24.4)
50UN6950ZUF
50UN6951ZUF
50UN7300PUF
50UN7300PUB 1,130 (44.4) 716 (28.1) 232 (9.1) 663 (26.1) 86.3 (3.3) 11.5 (25.3) 11.3 (24.9)
50UN7000PUC
50UN7300AUD
50UN7300PUC
50UN8050PUD 1,128 (44.4) 716 (28.1) 231 (9) 658 (25.9) 86.4 (3.4) 12.3 (27.1) 12.1 (26.6)
50UN8000PUB 1,128 (44.4) 713 (28) 232 (9.1) 658 (25.9) 86.4 (3.4) 12.3 (27.1) 12.1 (26.6)
55UN6950ZUA
55UN6951ZUA
55UN7100PUA
55UN7000PUB 1,247 (49) 787 (30.9) 231 (9) 728 (28.6) 88.3 (3.4) 13.9 (30.6) 13.7 (30.2)
55UN7300PUB 1,244 (48.9) 781 (30.7) 232 (9.1) 726 (28.5) 87.1 (3.4) 14.5 (31.9) 14.3 (31.5)
55UN7300AUD
55UN7300PUC
55UN7310PUC
55UN7300PUF 1,244 (48.9) 783 (30.8) 235 (9.2) 726 (28.5) 87.1 (3.4) 14.4 (31.7) 14.3 (31.5)
55UN8000PUB 1,234 (48.5) 773 (30.4) 232 (9.1) 717 (28.2) 84.0 (3.3) 16.2 (35.7) 16.0 (35.2)
55UN8050PUD 1,234 (48.5) 776 (30.5) 231 (9) 717 (28.2) 84.0 (3.3) 16.2 (35.7) 16.0 (35.2)
60UN7000PUB 1,368 (53.8) 862 (33.9) 269 (10.5) 796 (31.3) 89.1 (3.5) 19.8 (43.6) 19.4 (42.7)
60UN6950ZUA
60UN6951ZUA
60UN7300PUA
60UN7310PUA
20
A
975 (38.3) 615 (24.2) 188 (7.4) 574 (22.5) 80.3 (3.1) 8.4 (18.5) 8.3 (18.2)
973 (38.3) 623 (24.5) 216 (8.5) 572 (22.5) 85.0 (3.3) 8.1 (17.8) 8.0 (17.6)
1,110 (43.7) 709 (27.9) 231 (9.0) 650 (25.5) 81.1 (3.1) 11.3 (24.9) 11.1 (24.4)
1,130 (44.4) 719 (28.3) 235 (9.2) 663 (26.1) 86.3 (3.3) 11.4 (25.1) 11.3 (24.9)
1,130 (44.4) 722 (28.4) 231 (9.0) 663 (26.1) 86.3 (3.3) 11.5 (25.3) 11.3 (24.9)
1,247 (49) 783 (30.8) 235 (9.2) 728 (28.6) 88.3 (3.4) 13.8 (30.4) 13.7 (30.2)
1,244 (48.9) 786 (30.9) 231 (9.0) 726 (28.5) 87.1 (3.4) 14.5 (31.9) 14.3 (31.5)
1,368 (53.8) 857 (33.7) 255 (10.0) 796 (31.3) 89.1 (3.5) 19.6 (43.2) 19.4 (42.7)
B C D E F F
90°
, B, C, D,
E
G
: mm (inches)
: kg (lbs)
Power consumption
95 W
110 W
120 W
140 W
140 W
160 W
175 W
MODELS
65UN6950ZUA
65UN6951ZUA
65UN7100PUA
65UN6900PUB 1,468 (57.7) 917 (36.1) 269 (10.5) 854 (33.6) 89.9 (3.5) 21.4 (47.1) 21.0 (46.2)
65UN7300PUF 1,463 (57.5) 910 (35.8) 255 (10.0) 850 (33.4) 87.8 (3.4) 21.5 (47.3) 21.3 (46.9)
65UN7300AUD
65UN7300PUC
65UN7310PUC
65UN7300PUB
65UN8000PUB 1,453 (57.2) 901 (35.4) 271 (10.6) 840 (33) 84.0 (3.3) 23.3 (51.3) 23.0 (50.7)
65UN8050PUD 1,453 (57.2) 905 (35.6) 269 (10.5) 840 (33) 84.0 (3.3) 23.3 (51.3) 23.0 (50.7)
65UN8500AUJ
65UN8500PUI
70UN7370PUB 1,578 (62.1)
70UN6950ZUA
70UN7070PUA
70UN7100PUA
70UN7370AUD
70UN7370PUC
75UN6950ZUD
75UN6951ZUD
75UN6970PUD
75UN7070PUC
75UN7100PUD
75UN7370AUH
75UN7370PUE
75UN8570AUD
75UN8570PUC
75UN7370PUB
75UN8000PUB
82UN8570PUB 1,850 (72.8) 1,128 (44.4) 333 (13.1) 1,068 (42) 89.9 (3.5) 47.0 (103.6) 46.2 (101.8)
82UN8570AUD
82UN8570PUC
82UN8070PUD
86UN8570PUB 1,943 (76.4) 1,178 (46.3) 333 (13.1) 1,118 (44) 93.3 (3.6) 45.0 (99.2) 44.2 (97.4)
86UN8570AUD
86UN8570PUC
A
1,468 (57.7) 913 (35.9) 255 (10) 854 (33.6) 89.9 (3.5) 21.2 (46.7) 21.0 (46.2)
1,463 (57.5) 914 (35.9) 269 (10.5) 850 (33.4) 87.8 (3.4) 21.6 (47.6) 21.3 (46.9)
1,463 (57.5) 910 (35.8) 271 (10.6) 850 (33.4) 87.8 (3.4) 21.6 (47.6) 21.3 (46.9)
1,463 (57.5) 914 (35.9) 269 (10.5) 850 (33.4) 87.8 (3.4) 21.6 (47.6) 21.3 (46.9) 205 W
1,578 (62.1) 984 (38.7) 299 (11.7) 913 (35.9) 91.1 (3.5) 31.4 (69.2) 30.7 (67.6)
1,693 (66.6) 1,048 (41.2) 345 (13.5) 978 (38.5) 88.8 (3.4) 35.4 (78.0) 34.6 (76.2)
1,693 (66.6) 1,037 (40.8) 333 (13.1) 978 (38.5) 88.8 (3.4) 35.4 (78) 34.6 (76.2)
1,850 (72.8) 1,138 (44.8) 345 (13.5) 1,068 (42) 89.9 (3.5) 47.0 (103.6) 46.2 (101.8)
1,943 (76.4) 1,188 (46.7) 345 (13.5) 1,118 (44) 93.3 (3.6) 45.0 (99.2) 44.2 (97.4)
Power requirement AC 120 V ~ 50 / 60 Hz
B C D E F F
974 (38.3) 298 (11.7) 913 (35.9) 91.1 (3.5) 31.3 (69) 30.7 (67.6)
G
Power consumption
ENGLISH_Index
195 W
225 W
240 W
315 W
335 W
21
Loading...