IPS LED MONITOR (LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read the safety information carefully before using the product. IPS LED Monitor (LED Monitor) Model List
43UN700
43BN70U
43UN700T
www.lg.com
<![endif]>ENGLISH
2 Contents
3 |
LICENSE |
24 |
TROUBLESHOOTING |
|||
|
|
|
|
|
|
|
4 |
ASSEMBLING AND PREPARING |
26 |
SPECIFICATIONS |
|||
4 |
Supported Drivers and Software |
28 |
Factory Support Mode (Preset Mode, PC) |
|||
5 |
Component and Button Description |
28 |
HDMI |
|||
5 |
- How to Use the Joystick Button |
28 |
DisplayPort / USB-C |
|||
6 |
Moving and Lifting the Monitor |
29 |
HDMI Timing (Video) |
|||
7 |
- Using the cable holder |
29 |
Power LED |
|||
7 |
- Installing onto a table |
|
|
|||
8 |
- Adjusting the angle |
30 |
EXTERNAL CONTROL DEVICE |
|||
9 |
- Using the Kensington lock |
|||||
|
SETUP |
|||||
10 - Installing the wall mount plate |
|
|
||||
30 |
- Communication Parameters |
|||||
10 - Installing to a wall |
||||||
30 |
- Transmission |
|||||
|
|
|
|
|||
|
12 |
REMOTE CONTROL |
30 |
- OK Acknowledgement |
||
|
30 |
- Error Acknowledgement |
||||
|
|
|
||||
|
|
|
|
31 |
- Command Reference List |
|
13 USING THE MONITOR |
|
|
|
13Connecting to a PC
13- HDMI connection
13- DisplayPort connection
14- USB-C connection
14Connecting to AV Devices
14- HDMI connection
15Connecting Peripherals
15- USB Cable connection - PC
16Connecting to External Devices
16- Connecting Headphones
17USER SETTINGS
17Activating the Main Menu
17- Main Menu Features
18User Settings
18 - Menu Settings
LICENSE 3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers
Forum, Inc.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
CAUTION
yyAlways use genuine LG components to ensure safety and product performance.
yyThe product warranty will not cover damage or injury caused by the use of unauthorized components. yyIt is recommended that use the supplied components.
yyIf you use generic cables not certified by LG, the screen may not display or there may be image noises. yyIllustrations in this document represent typical procedures, so they may look different from the actual product. yyDo not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so
may damage the product.)
yyApplying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
yyDo not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
yyWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
yyFor wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because there is no problem in using the product at all.
NOTE
yyThe components may look different from those illustrated here.
yyWithout prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
yyTo purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you purchased the product.
yyThe power cord provided may differ depending upon the region.
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software |
Installation Priority |
|
|
Monitor Driver |
Recommended |
|
|
On Screen Control |
Recommended |
|
|
Dual Controller |
Optional |
|
|
ASSEMBLING AND PREPARING 5
<![endif]>ENGLISH
yyIR Receiver
Joystick Button
Power LED
yyOn: power is on
yyOff: power is off
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
|
|
Power on |
Press the joystick button once with your finger to turn on the |
|
|
monitor. |
|
|
|
|
|
|
|
|
|
|
|
Power off |
Press and hold the joystick button once with your finger to turn off the |
|
|
monitor. |
|
|
|
|
|
|
|
|
|
|
◄/► |
Volume |
You can control the volume by moving the joystick button left/right. |
|
Control |
||
|
|
|
|
|
|
|
|
NOTE
yy The joystick button is located at the bottom of the monitor.
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the screen itself.
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
Or
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
yyIf you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
ASSEMBLING AND PREPARING 7
Arrange the cables using the cable holder as shown in the illustration.
Lift the monitor and place it on the table in an upright position.
Place at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation.
100 mm |
|
(3.94 inches) |
100 mm |
(3.94 inches)
100 mm
(3.94 inches) 100 mm
(3.94 inches)
Or
Or
100 mm |
|
(3.94 inches) |
100 mm |
(3.94 inches)
100 mm
(3.94 inches) 100 mm
(3.94 inches)
<![endif]>ENGLISH
Cable Holder
CAUTION
yyUnplug the power cord before moving or installing the monitor. There is risk of electric shock.
yyMake sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
yyIf you need another power cord, please contact your local dealer or the nearest retail store.
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
|
|
Adjusting the angle |
Cautions When Connecting Power Cord |
1 Place the monitor in an upright position, mounted on the stand base.
2 Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards for a comfortable viewing experience.
43UN700
43BN70U
yyMake sure to use the power cord that is provided in the product package and connect it to a grounded power outlet.
yyIf you need another power cord, please contact your local dealer or the nearest retail store.
Rear Side |
Front Side |
|
ASSEMBLING AND PREPARING 9 |
|
WARNING |
Using the Kensington lock |
|
yyTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below.
43UN700 43BN70U
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
yyBe careful not to touch or press the screen area when adjusting the angle of the monitor.
<![endif]>ENGLISH
Or
Or
NOTE
yyUse of the Kensington lock is optional.
The accessories can be purchased at your local electronics store.
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
This monitor supports the specification of the standard wall mount plate or compatible device.
1Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth.
2Place the wall mount plate onto the monitor and align it with the screw holes.
3Tighten the four screws to fix the plate to the monitor using a screwdriver.
NOTE
yyThe wall mount plate is sold separately.
yyFor more information on installation, refer to the wall mount plate's installation guide.
yyBe careful not to use excessive force when mounting the wall mount plate, as this can damage the monitor's screen.
Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches) of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.
100 mm
(3.94 inches)
100 mm (3.94 inches)
100 mm
(3.94 inches)
100 mm (3.94 inches)
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1If you use screw longer than standard, the monitor might be damaged internally.
2If you use improper screw, the product might be damaged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Wall Mount (A x B) |
200 x 200 |
Standard screw |
M6 |
Number of screws |
4 |
Wall Mount Plate |
LSW240B |
(Optional) |
|