LG 43UJ632T Owner’s Manual

OWNER’S MANUAL

Safety and Reference

LED TV*
* Disclaimer
LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your
set and retain it for future reference.

MFL69446160

www.lg.com

P/NO : MFL69446160 (1703-REV01)

ENGLISH

India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)

ATTENTION:

This product is qualified for the BEE Star rating in the ‘Home’ Mode.
The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture
quality.

yChanges to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
yDepending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the

stated energy consumption.

To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under
the ‘Set-up’ menu.

2

ENGLISH

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s
enclosure that may be of sucient magnitude to constitute a risk
of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•  Do not place the TV and/or remote control in the following
environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that

produce heat

- Near kitchen counters or humidiers where they can easily be

exposed to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or
product deformation.

•  Do not place the product where it might be exposed to dust. This
may cause a re hazard.

•  Mains Plug is the TV connecting/disconnecting device to AC
mains electric supply. This plug must remain readily attached and
operable when TV is in use.

•  Do not touch the power plug with wet hands. Additionally, if the
cord pin is wet or covered with dust, dry the power plug completely
or wipe dust o. You may be electrocuted due to excess moisture.

•  Make sure to connect Mains cable to compliant AC mains
socket with Grounded earth pin. (Except for devices which
are not grounded on earth.) Otherwise possibility you may be
electrocuted or injured.

•  Insert power cable plug completely into wall socket otherwise if
not secured completely into socket, re ignition may break out.

•  Ensure the power cord does not come into contact with hot objects
such as a heater. This may cause a re or an electric shock hazard.

•  Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in re or electric shock.

•  Bend antenna cable between inside and outside building to
prevent rain from owing in. This may cause water damaged
inside the Product and could give an electric shock.

•  When mounting TV onto wall make sure to neatly install and
isolate cabling from rear of TV as to not create possibility of electric
shock /re hazard.

•  Do not plug too many electrical devices into a single multiple
electrical outlet. Otherwise, this may result in re due to over­heating.

•  Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or damage
to the product.

•  Keep the anti-moisture packing material or vinyl packing out
of the reach of children. Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force the patient to vomit
and visit the nearest hospital. Additionally, vinyl packing can cause
suocation. Keep it out of the reach of children.

•  Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.

•  Dispose of used batteries carefully to ensure that a small child
does not consume them. Please seek Doctor- Medical Attention
immediately if child consumes batteries.

•  Do not insert any metal objects/conductors (like a metal
chopstick/cutlery/screwdriver) into the end of power cable while
the power plug is plugged into wall socket. Additionally, do not
touch the power plug right after unplugging from the wall socket.
You may be electrocuted.

•  Do not put or store inammable substances near the product.
There is a danger of combustion/explosion or re due to careless
handling of the inammable substances.

•  Do not drop metallic objects such as coins, hair pins, chopsticks or
wire into the product, or inammable objects such as paper and
matches. Children must pay particular attention. Electrical shock,
re or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.

3

ENGLISH

•  Do not spray water on the product or scrub with an inammable
substance (thinner or benzene). Fire or electric shock accident
can occur.

•  Do not allow any impact, shock or any objects to fall into the unit,
and do not drop anything onto the screen. You may be injured or
the product can be damaged.

•  Never touch this product or antenna during a thunder or lighting
storm.
You may be electrocuted.

•  Never touch the wall outlet when there is leakage of gas, open the
windows and ventilate. It may cause a re or a burn by a spark.

•  Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.

•  If any of the following occur, unplug the product immediately and
contact your local service centre.

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in re or electric shock.

•  Unplug the TV from AC mains wall socket if you do not intend to
use the TV for a long period of time. Accumulated dust can cause
re hazard and insulation deterioration can cause electric leakage/
shock/re.

•  Apparatus shall not be exposed to dripping or splashing and no
objects lled with liquids, such as vases, shall be placed on the
apparatus.

•  Do not install this product on a wall if it could be exposed to oil or
oil mist. This may damage the product and cause it to fall.

•  If water enters or comes into contact with TV, AC adapter or power
cord please disconnect the power cord and contact service centre
immediately. Otherwise, this may result in electric shock or re.

•  Only use an authorized AC adapter and power cord approved by
LG Electronics. Otherwise, this may result in re, electric shock,
malfunction or product deformation.

•  Never Disassemble the AC adapter or power cord. This may result
in re or electric shock.

•  Be careful in handling the adapter to prevent any external shocks
to it. An external shock may cause damage to the adapter.

•  Make sure the power cord is connected securely to the power plug
on the TV.

CAUTION

•  Install the product where no radio wave occurs.

•  There should be enough distance between an outside antenna and

power lines to keep the former from touching the latter even when
the antenna falls. This may cause an electric shock.

•  Do not install the product on places such as unstable shelves or
inclined surfaces. Also avoid places where there is vibration or
where the product cannot be fully supported. Otherwise, the
product may fall or ip over, which may cause injury or damage
to the product.

•  If you install the TV on a stand, you need to take actions to prevent
the product from overturning. Otherwise, the product may fall
over, which may cause injury.

•  If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product.
When you install the set to use the wall mounting bracket
(optional parts), x it carefully so as not to drop.

•  Only use the attachments / accessories specied by the
manufacturer.

•  When installing the antenna, consult with a qualied service
technician. If not installed by a qualied technician, this may
create a re hazard or an electric shock hazard.

•  We recommend that you maintain a distance of at least 2 to 7
times the diagonal screen size when watching TV. If you watch TV
for a long period of time, this may cause blurred vision.

•  Only use the specied type of battery. This could cause damage to
the remote control.

•  Do not mix new batteries with old batteries. This may cause the
batteries to overheat and leak.

•  Batteries should not be exposed to excessive heat. For example,
keep away from direct Sunlight, open replace and electric
heaters.

•  Signal from Remote Control can be interrupted due to external/
internal lighting eg Sunlight, uorescent lighting. If this occurs
turn o lighting or darken viewing area.

•  When connecting external devices such as video game consoles,
make sure the connecting cables are long enough. Otherwise,
the product may fall over, which may cause injury or damage the
product.

•  Do not turn the product On/O by plugging-in or unplugging
the power plug to the wall outlet. (Do not use the power plug for
switch.) It may cause mechanical failure or could give an electric
shock.

•  Please follow the installation instructions below to prevent the
product from overheating.

- The distance between the product and the wall should be more

than 10cm.

- Do not install the product in a place with no ventilation (e.g., on

a bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

This may result in re.

4

ENGLISH

•  Take care not to touch the ventilation openings when watching the

<

TV for long periods as the ventilation openings may become hot.
This does not aect the operation or performance of the product.

•  Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with
an exact replacement part by an authorized servicer.

•  Prevent dust collecting on the power plug pins or outlet. This may
cause a re hazard.

•  Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.

•  Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil or pen, or make a scratch on it, as it may
causedamage to screen.

•  Avoid touching the screen or holding your nger(s) against it for
long periods of time. Doing so may produce some temporary or
permanent distortion/damage to screen.

•  As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn o this
unit by SWITCH.

•  When unplugging the cable, grab the plug and unplug it, by
pulling at the plug. Don’t pull at the cord to unplug the power cord
from the power board, as this could be hazardous.

•  When moving the product, make sure you turn the power o rst.
Then, unplug the power cables, antenna cables and all connecting
cables.
The TV set or power cord may be damaged, which may create a re
hazard or cause electric shock.

•  When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.

•  Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.

•  Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.

•  When cleaning the product and its components, unplug the power
rst and wipe it with a soft cloth. Applying excessive force may
cause scratches or discolouration. Do not spray with water or wipe
with a wet cloth. Never use glass cleaner, car or industrial shiner,
abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel. Otherwise, this may result in re, electric
shock or product damage (Deformation, corrosion or breakage).

Preparing

NOTE

•  If the TV is turned on for the rst time after it was shipped from the
factory, initialization of the TV may take a few minutes.

•  Image shown may dier from your TV.

•  Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

•  The available menus and options may dier from the input source
or product model that you are using.

•  New features may be added to this TV in the future.

•  The items supplied with your product may vary depending on the

model.

•  Product specications or contents of this manual may be changed
without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not t into your TV’s USB port.

B

A

•  Use a certied cable with the HDMI logo attached.

•  If you do not use a certied HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI

- High-Speed HDMI

®/TM

®/TM

•  How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

10 cm (+ / -2 cm)

CAUTION

•  Do not use any unapproved items to ensure the safety and product
life span.

•  Any damage or injuries caused by using unapproved items are not
covered by the manufacturer’s warranty.

•  Some models have a thin lm attached on to the screen and this
must not be removed.

•  When attaching the stand to the TV set, place the screen facing
down on a cushioned table or at surface to protect the screen
from scratches.

•  Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV may tilt
forward after being installed.)
Do not use too much force and over tighten the screws; otherwise
screw may be damaged and not tighten correctly.

B

*A < 10 mm

18 mm

A

*B

Cable (3m or less)
Cable with Ethernet (3m or less)

[TV side]

5

ENGLISH

•  Make sure to wring any excess water or cleaner from
the cloth.

•  Do not spray water or cleaner directly onto the TV
screen.

•  Make sure to spray just enough of water or cleaner
onto a dry cloth to wipe the screen.

•  When cleaning the product, be careful not to allow
any liquid or foreign objects to enter the gap between
the upper, left or right side of the panel and the guide
panel. (Depending on model)

Separate purchase

Separate purchase items can be changed or modied for quality
improvement without any notication. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.

(Depending on model)

AN-MR650A

Magic Remote

Maintenance

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend
the product lifespan.

• Make sure to turn the power off and disconnect the power cord

and all other cables first.

• When the TV is left unattended and unused for a long time,

disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened
in clean water or a diluted mild detergent. Then wipe immediately
with a dry cloth.

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• Do not push, rub, or hit the surface with your fingernail or a sharp

object, as this may result in scratches on the screen and image
distortions.

• Do not use any chemicals as this may damage the product.

• Do not spray liquid onto the surface. If water enters the TV, it may

result in fire, electric shock, or malfunction.

Lifting and moving the TV

(*Image may vary depending on models)

Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move the TV in the box or packing material
that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and
all cables.

•  When holding the TV, the screen should face away from you to
avoid damage.

•  Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.

•  When transporting a large TV, there should be at least 2 people.

•  When transporting the TV by hand, hold the TV as shown in the

following illustration.

•  When transporting the TV, do not expose the TV to jolts or
excessive vibration.

•  When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.

•  Do not apply excessive pressure to cause exing / bending of frame
chassis as it may damage screen.

•  When handling the TV, be careful not to damage the protruding
buttons.

CAUTION

•  Avoid touching the screen at all times, as this may

result in damage to the screen.

•  Do not move the TV by holding the cable holders, as

the cable holders may break, and injuries and damage
to the TV may occur.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

6

ENGLISH

Using the button

(*Image may vary depending on models)

(Depending on model)

You can simply operate the TV functions, using the button.

<A type>

Dome Button

Joystick Button

or

Basic functions

<A / B type>

Power On

Power O
(Press and

1

Hold)

Volume

Control

Programmes
Control

When the TV is turned off,
Place your finger on the
Joystick button and
Press it once and release it.

When the TV is turned on,

place your finger on the
joystick button and press it
once for few seconds and
release it. (However, if the
Menu button is on the
screen, pressing and
holding the joystick button
will let you exit the Menu.

If you place your finger over

the joystick button and move

it left or right, you can adjust

the volume level you want.

If you place your finger over

the Joystick button and move

it forward or backward, you

can scrolls through the saved

programmes you want.

<B type>

<C type>

<C type>

Power On (Press)
Power O 1 (Press and Hold)
Menu Control (Press 2)
Menu Selection (Press and Hold 3)

1 All running apps will close, and any recording in progress will stop.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

(Depending on model)

When the TV is turned on, press the
the Menu items using the button.

Turns the power o.

Accesses the settings menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

button one time. You can adjust

7

ENGLISH

Mounting on a table

(*Image may vary depending on models)

1 Lift and tilt the TV into its upright position on a table.

•  Leave a 10 cm (minimum) space from the wall for proper
ventilation.

10 cm

10 cm

2 Connect the power cord to a wall outlet.

10 cm

10 cm

10 cm

Using the kensington security system

This feature may vary depending on model

• Image shown may differ from your TV.

The Kensington security system connector is located at the rear of
the TV. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit
http://www.kensington.com. Connect the Kensington security system
cable between the TV and a table.

.

CAUTION

•  Do not place the TV near or on sources of heat, as
this may result in re or other damage.

WARNING

•  Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)

•  If a television is not positioned in a suciently stable
location, it can be potentially hazardous due to
falling. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:

» Using cabinets or stands recommended by the

manufacturer of the television.

» Only using furniture that can safely support

the television.

» Ensuring the television is not overhanging the

edge of the supporting furniture.

» Not placing the television on tall furniture (for

example, cupboards or bookcases) without
anchoring both the furniture and the televi­sion to a suitable support.

» Not standing the televisions on cloth or other

materials placed between the television and
supporting furniture.

» Educating children about the dangers of

climbing on furniture to reach the television
or its controls.

NOTE

•  The Kensington security system is optional. You can obtain
addtional accessories from most electronics stores.

Securing the TV to a wall

(Features may vary depending on models.)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

•  If there are bolts inserted at the eye-bolts position, remove the
bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear
of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

CAUTION

•  Make sure that children do not climb on or hang on
the TV.

NOTE

•  Use a platform or cabinet that is strong and large enough to
support the TV securely.

•  Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.

8

ENGLISH

Mounting on a wall

(*Image may vary depending on models)

Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the oor. When you attach the TV to other building materials, please
contact qualied personnel. LG recommends that wall mounting be
performed by a qualied professional installer.
We recommend the use of LG’s wall mount bracket. LG’s wall mount
bracket is easy to move with cables connected. When you do not use
LG’s wall mount bracket, please use a wall mount bracket where the
device is adequately secured to the wall with enough space to allow
connectivity to external devices. It is advised to connect all the cables
before installing xed wall mounts.

43UJ75**
43UJ69**
43UJ67**
43UJ66**
43UJ65**
43UJ63**

10 cm

10 cm

10 cm

55/65SJ95**

10 cm

Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.

CAUTION

•  Disconnect the power cord first, and then move or install the TV.
Otherwise electric shock may occur.

•  Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.

•  The Screw Cover will protect the opening from accumulating dust
and

dirty.

•  If you install the TV on a ceiling or slanted wall, it may fall and
Result in severe injury. Use an authorized LG wall mount and
contact the local dealer or qualified personnel.

•  Do not over tighten the screws as this may cause damage to the TV
And void your warranty.

• 

Use the screws and wall mounts that meet the VESA standard. Any
Damages or injuries by misuse or using an improper accessory are
Not covered by the manufacture’s warranty.

Separate purchase (Wall mounting bracket)

Model

VESA (A x B) (mm) 200 x 200 300 x 200

Standard screw M6 M6

Number of screws 4 4

55SJ85**
49/55SJ80**
49/55UJ75**

Model

VESA (A x B) (mm) 300 x 300 300 x 300

Standard screw M6 M6

Number of screws 4 4

Model

VESA (A x B) (mm) 600 x 400

Standard screw M8

Number of screws 4

CAUTION

•  Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.

NOTE

•  Do not use a sharp object when you detached the cable cover. This
could damage the cable or the cabinet. It may also cause personal
harm.

•  Use the screws that are listed on the VESA standard screw
specifications.

•  The wall mount kit includes an installation manual and necessary
parts.

•  The wall mount bracket in not provided along with the TV set.

•  The length of screws may differ depending on the wall mount.

Make sure to use the proper length.

•  For more information, refer to the manual supplied with the wall
mount.

•  When installing the wall mounting bracket, use the Adhesive Label.
The Adhesive Label will protect the opening from accumulating
dust and dirt. (Only when the item of the following form is
provided)

49/55UJ69**
49/55UJ67**
49/55/60/65UJ66**
49/55UJ65**
49/55/60/65UJ63**

75/86SJ95**
70/75UJ69**
70/75UJ65**

A

B

60/65SJ85**
60/65SJ80**
60/65UJ75**
65UJ69**
65UJ67**
60/65UJ65**

9

ENGLISH

10

When installing the TV set using wall mount bracket, it is
recommended to cover the stand hole using clear label, in order to
prevent the influx of dust and insects. (Depending on model)

Connections (notications)

Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.

NOTE

•  The external device connection may dier from the model.

•  Connect external devices to the TV regardless of the order of the

TV port.

•  If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.

•  Refer to the external equipment’s manual for operating
instructions.

•  If you connect a gaming device to the TV, use the cable supplied
with the gaming device.

•  In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.

•  In PC mode, some resolution settings may not work properly
depending on the graphics card.

•  If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance.

•  When connecting via a wired LAN, it is recommended to use a CAT
7 cable.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•  Use a signal splitter to use more than 2 TVs.

•  If the image quality is poor, install a signal amplier properly to

improve the image quality.

•  If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.

•  An antenna cable and converter are not supplied.

•  Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

•  For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly. This TV cannot
receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because
the related standards have not been conrmed. (Depending on
model)

USB connection

Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.

General HDMI ULTRA HD Deep

• 

Colour :

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer.
However, if the device doesn’t support it, it may not work properly.
In that case, connect the device to a different HDMI port or change the
T V’s HDMI ULTRA HD Deep Colour setting to Off.

(This feature is available on certain models which are supported

ULTRA HD Deep Colour only.)

NOTE

•  Supported HDMI Audio format :
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
DTS (44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
(Depending on model)

ENGLISH

Remote control

[Magic Link 氊獞 懆凃]
怾

割 斳洢

RECENT  RECENTS

Magic Link

怾

割 旃沋

QUICK
APPS
QUICK
ACCESS

LIVE TV 怾

割 斳洢

[Magic Link 氊獞 懆凃]
怾

割 斳洢

RECENT  RECENTS

Magic Link

怾

割 旃沋

QUICK
APPS
QUICK
ACCESS

LIVE TV 怾

割 斳洢

(*Image may vary depending on models)

(Depending on model)

(Some buttons and services may not be provided depending on models
or regions.)

The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse

CAUTION

•  Do not mix old and new batteries, as this may damage the
remote control.

•  In Analogue TV and some countries, some remote control buttons
may not work.

•  The remote control will not be included depending on sales market.

Make sure to point the remote control toward the remote control sensor
on the TV.

* To use the button, press and hold for more than 3 seconds.

1 2

and ends to the label inside the

(POWER) Turns the TV on or o.

Selects Radio, TV and DTV programme.

(Search) Search for content such as TV programmes, movies and
other videos, or perform a web search by entering text in the search
bar.

By zooming in on the selected area, you can view it in

full screen.

(Q. Settings) Accesses the Quick Settings.

(INPUT) Changes the input source.

Number buttons Enters numbers.

Shows programme guide.

Returns to the previously viewed programme.

as you edited while using apps or watching Live TV.

Views the information of the current programme and screen.

1, 2

Streaming Service. (Depending on model)

- Pressing and holding the button shows previous history.

(Depending on model)
Teletext buttons (
teletext.

currently watching.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.

model)

Machine
Control buttons (

menus.

* You can use the application by selecting the number

Adjusts the volume level.

Accesses your favourite programme list.

(MUTE) Mutes all sounds.

Scrolls through the saved programmes.

Moves to the previous or next screen.

Streaming Service buttons Connects to the Video

Shows the previous history. (Depending on model)

(HOME) Shows Home menu.

Shows the list of Programmes and Recommended.

) These buttons are used for

* Provides content related to the programme you are

Selects menus or options and conrms your input.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

Audio descriptions function will be enabled. (Depending on

Starts to record and displays record menu. (Only Time

Ready

supported model)

, , , These access special functions in some

) Controls media contents.

11

ENGLISH

Magic remote functions

(*Image may vary depending on models)

(Depending on model)

(Some buttons and services may not be provided depending on models
or regions.)

When the message “Magic remote battery is low. Change the battery.” is
displayed, replace the battery.

To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.

CAUTION

•  Do not mix old and new batteries, as this may damage
the remote control.

•  In Analogue TV and some countries, some remote

control buttons may not work.

•  The remote control will not be included depending on sales market.

* To use the button, press and hold for more than 3 seconds.

and ends to the label inside the compartment,

1 2

(POWER) Turns the TV on or o.

You can turn your set-top box on or o by adding the set-top

box to the universal remote control for your TV.

Number buttons Enters numbers.
Alphabet buttons Enters letters. (Depending on model)

Accesses the saved programmes list.

(Space) Opens an empty space on the screen keyboard.

(Depending on model)

(Screen Remote) Displays the Screen Remote.

- Accesses the Universal Control Menu. (Depending on model)

you edited while using apps or watching Live TV.

model)

(Depending on model)
Network connection is required to use the voice recognition function.
1 Press the voice recognition button.
2

and other videos, or perform a web search by entering text in the
search bar.

- Pressing and holding the button displays the All Settings menu.

- When you are not watching via a set-top box: the display changes to

You can change programmes by using the Wheel button.

button to scroll the menu. If you press buttons while
the pointer is in use, the pointer will disappear from the screen and
Magic Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.

1, 2

Service.

- Pressing and holding the button displays all the lists of external

Teletext buttons (

currently watching.

screen.

pointed.

* You can use the application by selecting the number as

* Audio descriptions function will be enabled. (Depending on

Adjusts the volume level.

Scrolls through the saved programmes.

(MUTE) Mutes all sounds.

(Voice recognition)

Speak when the voice display window appears on the TV screen.

(SEARCH)* Search for content such as TV programmes, movies

(HOME) Shows Home menu.

/ * Shows previous history

(Q. Settings) Accesses the Quick Settings.

Displays the set-top box Home menu.

the set-top box screen.

Wheel (OK) Press the center of the Wheel button to select a menu.

(up/down/left/right) Press the up, down, left or right

Returns to the previous level.

* Clears on-screen displays and returns to last input viewing.

Shows programme guide.

Connects to the Video Streaming

(INPUT) Changes the input source.

inputs.

, , , These access special functions in some menus.

, ) These buttons are used for teletext.

* Provides content related to the programme you are

By zooming in on the selected area, you can view it in full

* You can zoom in on the area where the remote control is

12

ENGLISH

Registering magic remote

How to register the magic remote

To use the Magic Remote, rst pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the

the remote control.

* If the TV fails to register the Magic Remote, try again after turning

the TV off and back on.

Wheel (OK) on

How to deregister the magic remote

Press the and (HOME) buttons at the same time, for ve
seconds, to unpair the Magic Remote with your TV.

- Pressing and holding the button will let you cancel and re-

register Magic Remote at once.

Precautions to take when using the
magic remote

•  If the pointer has not been used for a certain period of time or magic
Remote is placed on a flat surface, then the pointer will disappear.

•  If the pointer is not responding smoothly, you can reset the pointer
by moving it to the edge of the screen.

•  The Magic Remote depletes batteries faster than a normal remote

•  You may experience communication failures depending on the

•  The Magic Remote may not work properly if a wireless route (AP) is

•  Do not disassemble or heat the battery.

•  Do not drop the battery. Avoid extreme shocks to the battery.

•  Inserting the battery in the wrong way may result in explosion.

•  Take care not bump in to nearby furnitue or other people when

•  Usage of alkaline battery is recommended.

due to the additional features.

accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4GHz) as the Magic Remote. This may cause
communication failures.

withing 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.

using the magic Remote.

Licenses

Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.

(Only UJ75**, SJ80**, SJ85**, J95**)

Open source software
notice information

To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.

In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
[e-mail]. This oer is valid for three (3) years from the date
on which you purchased the product.

External control device
setup

To obtain the external control device setup information, please visit

www.lg.com

.

Troubleshooting

Cannot control the TV with the remote control.

•  Check the remote control sensor on the product and try again.

•  Check if there is any obstacle between the product and the remote

control.

•  Check if the batteries are still working and properly installed (
to , to ).

No image display and no sound is produced.

•  Check if the product is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

•  Check the power control settings. The power supply may be
interrupted.

•  Check if the Sleep Timer / Timer Power Off is activated in the
TIMERS settings.

•  Check if the Auto Power O is activated in the General
Mode settings. (Depending on model)

•  If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
displayed.

•  Turn the TV o/on using the remote control.

•  Reconnect the HDMI cable.

•  Restart the PC with the TV on.

Eco

.

13

ENGLISH

Abnormal Display

•  If the product feels cold to the touch, there may be a small “icker”
when it is turned on. This is normal, there is nothing wrong with
product.

•  This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1ppm on the panel. This does not indicate a
malfunction and does not aect the performance and reliability
of the product.
This phenomenon also occurs in third-party products and is not
subject to exchange or refund.

•  You may nd dierent brightness and color of the panel depending
on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.

•  Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a xed image on the TV screen for
a long period of time. This phenomenon also occurs in third-party
products and is not subject to exchange or refund.

Generated Sound

•  “Cracking” noise: A cracking noise that occurs when watching or
turning o the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.

•  Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
on the product.
This generated sound does not aect the performance and
reliability of the product.

Specications

Wireless module specications

•  As band channels can vary per country, the user cannot change or
adjust the operating frequency. This product is congured for the
regional frequency table.

•  For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.

Wireless module(LGSBWAC72)specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output power(Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz (Not for EU)

Bluetooth

Frequency range Output power(Max.)

2400 to 2483.5 MHz 8.5 dBm

* “IEEE 802.11ac” is not available in all countries.

CI Module Size1 (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

Operating

Temperature

Operating

Environment

condition

1 Only Satellite models.

Humidity

Storage Tem-

perature

Storage

Humidity

14 dBm

16.5 dBm

11.5 dBm

0 °C to 40 °C

Less than 80 %

-20 °C to 60 °C

Less than 85 %

14