LG 42PX5M Owner's Manual
Installation
HDMITM , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual Interface(DVI).
This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p, 720p, 1080i) modes.
When you Connect with HDMI/DVI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI/DVI function,
automatically, support Plug & Play and then set the HDMI/DVI Source Devices 1280 x 720p. After reading in HDMI/DVI Source EDID stored in the set is used. If HDMI/DVI Source Devices not supported
Auto HDMI/DVI is been, the Resolution is set, manually.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How to connect>)
How to connect
1. |
When Source Devices (DVD Player or Set Top Box) support HDMI. |
|
|
If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable .(not supplied with the prod- |
|
|
uct). |
|
|
If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x 720p. But if not, |
resolution |
|
divert Manually Setting for reference Manual of Source Devices. |
|
|
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p. |
|
|
Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable. |
|
2. |
When Source Devices (DVD Player or Set Top Box) supports DVI. |
|
|
If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the |
|
|
product). |
|
|
If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x 720p. But if not, |
resolution |
|
divert Manually Setting for reference Manual of Source Devices. |
|
|
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p. |
|
|
In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector, RGB/DVI Audio Input of the set |
|
|
connect to Audio Cable (not supplied with the product). And then you can listen to normal Audio. |
|
3. When PC supports DVI.
If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the product).
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
Use the the set's HDMI/DVI (VIDEO) for video connections, depending on your PC connector.
If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either RGB Input or HDMI/DVI Input to display the PC on the set.
If he graphics card on the PC does output analog RGB and DVI simultaneously, the set to either RGB Input or HDMI/DVI Input; (the other mode is set to Plug and Play automatically by the set.)
Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio.
Owner's Manual 9
Operation
sRGB
When the set is connected to external equipment with the sRGB function, the colour difference is adjusted the equal image of each other.
This function works in the following mode : RGB[PC], HDMI[PC].
1. Press the MENU button and then use D/E button to select the PICTURE menu.
2. Press the G button and then use D/E button to select sRGB.
3. Press the G button and then use D/E button to select On or Off.
4. Repeatedly press the MENU button to return to normal viewing.
ACM (Active Colour Management)
Adjust the ACM to select the desired skin colour option.
This function is not available for use in RGB[PC], HDMI[PC] mode. -It's not available to use this function in XD Off mode.
1. Press the MENU button and then use D/E button to select the PICTURE menu.
2. Press the G button and then use D/E button to select ACM.
3. Press the G button and then use F / G button to make appropriate adjustments.
4. Repeatedly press the MENU button to return to normal viewing.
Manual Picture Control
You can adjust picture contrast, brightness, colour, sharpness and tint (NTSC input only) to the levels you prefer.
-It's not available to use colour, sharpness function in RGB[PC], HDMI[PC] mode. In the broadcasting system PAL/SECAM, the picture item Tint doesn't work.
1. |
Press the MENU button and then use D / E button to select the PICTURE menu. |
2. |
Press the G button and then use D / E button to select the desired picture option. |
3. |
Press the G button and then use F / G button to make appropriate adjustments. |
4. |
Repeatedly press the MENU button to return to normal viewing. |
Owner's Manual 13
Loading...