LG 42PX3DCV - Plasma Panel With TV Tuner, 42PX3DCV-UC Owner's Manual

P

Lnual carefully and completely before

reference.

number of the TV in the

cover and relate this

ulre service,

Waming!Cau#on

I;

arninq

WARNING/CAU_ON

WAR NiNGiCA UTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR SACK) NO USER

SERVICEABLE PARTS INS[DE_ REFER TO QUALIFIED SERVICE PERSONNEL,

the presence of uninsuJated "_ngerous voltage' within the product's enclosure that may be of suffi-

The _ightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to

cient magnffude to constitute a risk of electric shock to persons

The exclamation point within an equilateral tdang_e is intended to alert the user to the presence of

important o_rating and maintenance (servidng) instructions in the literature accompanying the appD
ance,

WAR NING/CA UTION:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE,

FCC NOTICE

A Class B digital device
This equipment has been tested and found to compty with the limits for a Class B dig_aJ device, pursuant to Part

15 of the FCC Rules. These limits are designed to provi_ reasonab{e protection against harmful interference in
a residentia_ installation. This equipment _nerates, uses and can radiate radio frequency energy and if not

insta_ied and used in accordance with the instructions may cause harmful interference to radio communications,
However, there is no guarantee that interference witi not occur in a pa_cuiar instailaflon ff this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equip_nt off

and on, the user is encouraged to t_ to correct the interference by one or more of the following measures:

- Reorient or retocate the receiving antenna,
o hcrease the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consuff the deaQer or an experienced radioiTV technician for help.

• Any changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment,

Do not attempt to modify this preduct in any way without written authod_tion from LG Electronics. Unauthorized mod_
ificetion could void the user's authority to o_rate this product.

COMPLIANCE:

The responsible pa_ for this product's compliance is:
LG Electronics U.S.A., _nc

1_ Sy_v_ Avenue, Eng_woed Cliffs, NJ 07632
1°800-243_

http://www.lgusa.com

jJ

WARNI NGiCAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE,

2 Plasma TV

SafetyInstrucliens

f

IMPORTANT SAFETY INSTRUCTIONS
important safety instructions shall be provided with each apparatus. This information shah be given in a separate bookiet or

sheet, or be located before, any o_rating instructions in an instruction for installation for use and supplied with the appara-

tus. This information sh_ll be given in a language acceptable to the cou_ where the apparatus is intended to be used. The

important safety instructions ehal_ be entitled 'Important Safety lnstructions"_ The foiiowing safety instructions shah be [nctud_
ed where applicable, and, when used shah _ ve_atJm as follows Additional safety infor_tion may be inc_u_d by adding

statements after the end of the fe]Jowing safety instruction list. At the manufacturer's op_on, a picture or drawing that i_lus-

trates the intent of a specific safety inst_ction may be placed immediately adjacent to that safety instruc_on :

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators_ heat registers, stoves, or other apparatus (including ampli-

fiers)that produce heat.

9. Do not defeat the sa{ety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs_ convenience receptacles_ and the
point where they exit from the apparatus.

11. Only use attachments/accessories s_cified by the manufacturer:

12., Use only with the cad, stand, tripod, bracket, or table spacified by the n-_nufacturer, or sold with the apparatus=
When a _rt is used, use caution when moving the cart!apparatus combination to avoid injury from Up-over.

PO_G'ABLE CA_ WARNING

J

Owner's Manual 3

SarelyInstructions

I ions

t3.

Unplug this apparatus during lightning storms or when unused for long periods of time.

14,

Refer all servicing to qualified service _rsonneL Servicing is required when the apparatus has been damaged
in any way, such as power_supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.

15. CAUTION concerning the Power Cord :

Most appliances recommend they be placed upon a dedicated circuit; that
is, a single outlet circuit which pawers only that app|tance and has no
additional outlets or branch circuits. Check the specification page of

this owner's manual to be certain,

Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or da_ged or

cracked wire insulation are dangerous. Any of these conditions could

result in electdc shock or fire. Periodically examine the cord el your
appliance, and if its appearance indicates damage or deterioration,

unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or Hiked upon. Pay
particular attention to plugs, wall outlets, and the poinf where the
cord exits the appliance.

16.

Outdoor Use Marking :

WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose _ts Appliance To Rain Or Moisture.

17,

Wet Location Marking :

Apparatus shall not be expased to dripping or splashing and no objects filled with liquids, such as vases, shah
be placed on the apparatus.

4 Plasma TV

Contents

Warnin!!Caution ................................ 2

Safety Instructions ............................. 3_-4

introduction

Installation

Operation

Controls ........................... 7

Connection Options ..................... 8

Remote Control Key Functions ............ 9_10

Accessories ............................. 11

InstaJtation hstructions .................. 11~12

Joining the "PC_lb_:/to the wall to protect _ set

t_b_r_ .............................. 11

External Equipment Connections ........... 13~18

Antenna or Cable Connection ........... 13~14

VCR Setup ........................... 14

Exlerna_ _JV Source Setup .............. 15

DVD Setup ......................... 15

HDSTB Setup ......................... 16

PC Setup ................................ 17

Monitor Out Setup .................. 18

Digital Audio Odtput ..................... 18

HDMI ............................... 19~21

Turning the TV On ........................ 22

On-screen Menus _nguage Selection .......... 22

Setup Menu Options

EZ Scan (Channel Search} ............... 23

Manual Scan ........................ 23

Channe_ Edit ........................... 24

DTV Signal Strength ..................... 24

Channel Lb_I Setup .................... 25

_nput Source .......................... 25

_nput Label .......................... 25

Video Menu Options

EZ Picture ............................ 26

Manual Picture Control (Custom Option} ...... 26

Color Temperature Control .............. 26

Video Reset ............................. 26

Audio Menu Options

Audio Language ........................ 27

EZ SoundRite / EZ Sound ................ 27

Manual Sound CentroI (Custom Option} ...... 27

Front Surround ......................... 28

TV Speakers On/Off Setup ................ 28

BBE .............................. 29

Stereo/SAP Broadcasts Setup .............. 29

_me Menu Options

Auto C_ock Setup ....................... 30

Manual C_ock Setup ................... 30

On/Off Timer Setup .................... 30

Sleep Timer /At_o Off .................... 31

Option Menu Features

Aspect Ratio Control ..................... 32

Cinerr_a 3:2 Mode Setup ................. 32

Caption ............................. 33

Caption / Text ............................. 33

Caption Option ........................ 34

ISM Method ........................... 34

Low Power ........................... 35

Lock Menu Options

Parentat Lock Setup ..................... 37

EPG (Electronic Program Guide} ............. 38

Brief Info ................................ 39

Mute ................................ 40

Freeze & Magnify ......................... 40

Screen Setup for PC mode .................. 41

APM(Adaptive Picture Mode} ................ 42

External Control Device Setup ................ 43~48

IR _es ................................ 49_50

Programming the Remote ...................... 51

Programming Codes ....................... 52~53

Troubleshooting Checklist ...................... 54

Maintenance ................................. 55

Product Specifications ......................... 56

Warranty ................................. 59~60

Setup and Operation Checklist

Setup and Operation Checklist
(see pages 13~21 for av_lable connection and operational setup options.)

1, Unpack TV and atl accessories 5, Turn video source equipment on,

2. Connect aH external video and audio equipment.
see pages 13-18.

3 _nsta_l batteries in remote control

See pa_ 9

4, Turn TV on,

See page 22,

6. Select viewing source for TV.
See pages 25.

7, Fine-tune source image and sound to your personal prefer°

enca or as required by source
see pages 26~ 29.

8. Additiona_ features set up
See Contents above.

After reading this manual, keep it handy for future reference,

OwnePs Manual 5

Inlroductien

In

What is a Plasma Display Panel (PDP)?

A plasma display pane[ is the latest display techno_oigy and the best way to achieve flat pane[ displays with excellent image quaiity

and large screen sizes that are easily viewable The PDP can be thought of as a descendant of the neon lamp and it can be also

be viewed as a series of fluorescent lamps

How does it work?
PDP is an array of ce_ls, known as pixels_which are comprised of 3 sub pixeis, corresponding to the colors red_green_and b_ue,

Gas in a plasma s_te is used to react with phosphors in each sub-pixel to produce colored light (red_green, or biue) These phos-
phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer monitors,

You get the rich, dynamic coUors that you expect Each sub-pixel is individually controlled by advanced electronics to produce over
16 million different colors, All of these mean that you get perfect images that are easity viewab_e in a display that is less than 5

inches thick,

160 _ - Wide angle range of vision
Your fiat panel plasma screen offers an exceptionally broad viewing angle _ over 160 degrees. This means that the display is

clear and visible to viewers anywhere in the room who can see the screen.

Wide Screen

The screen of the Ptasma Dispray is so wide that your viewing experience is as if you are in a theater.

Multimedia
Connect your plasma display to a PC and you can use it for conferencing, games and lntemet browsing

Versat:i le

The tight weight and thin size makes it easy to install your ptasma display in a variety of _ocations _ere cenventionaJ TVs wilt not

fit,

uction

The PDP Manufacturing Process: a few minute colored dots may be present on the PDP screen

The PDP (Plasma Display PaneJ), which is the display device of this product, is composed of 0.9 to 2.2 mitlion cells. A few cell

defers wi[I normally _cur in the PDP manufacturing process. _verai tiny, minute co_ored dots visible on the screen should be
acceptable. This a_so occurs in other PDP manufacturers' products. The tiny dots appearing does not mean that this PDP is defec-

_ve. Thus a few ceil defects are net sufficient cause for the PDP to be exchanged or returned. Our production technology mini°

mizes these cell defects dudng the manufacture and operation of this product.

6 Plasma TV

-This is a simplified representation of froot panel.

Here shown may be somewhat different from your TV.

Front Panel Controls

Introduc#on

Remote Control Sensor

CHANNEL (V, A) Buttons

VOLUME (_1_) Buttons

ENTER Button

MENU Button

TViVIDEO Button

POWER Button

Power Standby indicator

I_luminates red in standby m_e, [Huminates
green when the _ is turned on

Owner's Manual 7

lnlroduction

Back Connection Panel

S-VIDEO Input

ter picture quality than the video input

VIDEO Input

Connects the video signal from a
video device.

AUDIO Input

Use to connect to hear stereo _und

from an external device,

HDMI/DVI DVD/DTV Input Remote Control Port
connect a (Cempor_ 1-2) Connect your wired
DVt(Video), Connect a component remote control here,

signat to video/audio device to
H DMt/DVl these jacks,

RS-2320 INPUT

(CONTROL/SERVICE)
PORT

Connect to the RS-
232C port on a PC

S-Video Input
Connect S-Video out

from an S-VIDEO
device to the S-

WDEO input.

Antenna Input
Connect over4he_

air signals to this

I

to provide bet-

Digital Audio (DVI: Digffal
Visual

IntertaceiComponent2)

Input/
Digital Audio Output

Connect digital audio from
various types of equipment

Note; In standby mode_
the_ ports w/l! not work_

8 Plasma TV

RGB/AUDIO INPUT

Conned the monitor
output connector from
a PC to the appropri-

ate input port.

Audio/Video Input
Connec_ audio/video

output from an
external device to

these jacks.

Monitor Output

Connect a sec-
ond TV or

Monitor.

CABLE Input

Connect cable signals to this

iack_ either direct@ or through

This TV operates on an AC power, The voltage

is indicated on the Specifications page Never

attempt to operate the TV on DC power,

a _ble box

Power Cord Socket

= When using the remote control, aim it at the remote control sensor on the TV.

TV INPI

• Rotates the input mode between Antenna

and Cable.

• Video, Front Video, Component 1-2, RGB o
DTV (or RGB-PC) and HDMI/DV_ input

sources_ screen returns to the last TV,

Selects the rerr_te operating mode: TV,

DVD, VCR, AUDIO, CABLE or STB. Select

a trade other than TV, for the remote to

operate an external device.

tntroduc#on

Extama[ input modes rotate in regular
sequence:: Antenna, Cabte, Video, Front
Video, Component 1-2, RGB DTV (or
RGB-PC) and HDMI/DVI input sources.

(Video, Front Video, Component 1=2 input
sources are linked automatically, only if

these are connected )

Brings up the main menu to the screen.

Clears aH on=screen displays and returns to

TV viewing from any rr_nu,

Lets you setect the an_,3unt of time before

you r TV turns itself

Switches the sou_ on or off (R_fer to p.42)

EZ

Selects a factory preset picture mode

depending on the viewing environment.

Changes the aspect ratio.

When you watch the TV, inforrr_tion dis-
plays on top of the screen. Not available

in Component 1-2, RGB and HDM[/DW
mode (Refer to p.41)

Scrolls the Favorite channels.

Tunes to the r_ent channels,

Freezes the currently-viewed pierre,
Main picture is frozen.

Installing Batteries

• Open the batte_ compartment cover on the back side and instal_ the batteries
matching correct polar_y (+ with +_ - with -)_

•Instali two 1.5V AA ba_ries, Don't mix old or used batteries w_h new ones. Close

cove r,

OwnePs Manual 9

Inlroductien

Turns your TV or any other programmed

equipment on or off, depending on rr_de,

Shows program schedule.

_UM_TICK i
Allows you to navigate the on-screen menus

and adiust the system settings to your pref-

e ten ce.

Select a closed caption:

Off, CC1 ~4, Te×tl ~4.

VOLUME

Increases/decreases the sound leve4

EZ SOUND

Selects the _und appropriate for the pro _

grams character_

. Control some vid_ cassette recorders
or DVD players (RECORD" button is not

available for DVD p_ayers.)

DAY+!DAY-

Moves the Listings Grid forward or back-
ward in 24 hour increments.

CHANNEL UP/DOWN
Selects available channems found with EZ

scan.
PAGE UP/PAGE DOWN
Moves from one full set of screen infer =

marion to the next one_

SAP
_Jects MTS sound: MenD, Stereo, and
SAP in Analog mode Change the audio

_anguage in DTV m_e

BUTTONS

bu_ons

Adjusts screen position, size, and phase in

illuminates the remote contro_

buttons of selected mode

t0 Plasma TV

PC _de.

APM(Adaptive Picture Mode)

Concurrently, compare with the
Daylight, Nor_l, Night _me,and

Custom on the screem

LIGHT

Installation

I I

Ensure that the following accessories are included with your plasma display: tf an a_ssory is missing, p_ease contact the dealer

where you purchased the product.

Owner's Manual Batteries Power Cord

Remote Control

Secure the TV assembty by joining it to a wall by using the TV/Wat_ brackets

2-Wall brackets

2-eye-botts Dsub 15 pin Cable (RGB)

* If the set will be mounted on a desk top, inseA

the 2 eye-bo_ and tighten them securely in the upper
holes as shown

Instal! the wail brackets on the wail with 2 bo_ts*, (not
supplied with the product), as shown.
Match the height of the eye*bol_ and the wall brack-

ets
Check to be sure the eye-bo_ts and the brackets are
tightened securely.

75£_ Round Cable

* _ure the TV assembly to the wall with strong strings

or wire cables_ (not supplied with the produ_)_ as
shown.

Owner's Manual 1I

Installation

• The TV can be instarled in vadeus ways such as on a wall, or on a desktop etc.

• The TV is designed to be mounted horizentaJ_y:

GROUNDING

Ensure that you connect the ea_ ground wire to prevent possible
e_ectric shock_ if:grounding methods are not possible, have a quaJified
eJectrician install a separate circuit breaker_ Do not try to ground the

un_ by connecting it to telephone _res, lightening rods, or gas pipes

For pro_r ventJlation, altow a clearance of 4" on each
side and 2_'from the wall Detailed instailation instruc-

_ons are available from your dealer, see the optional
Wa_l Mounting Bracket Installation

t2 Plasma TV

For proper vent#atior_ allow a clearance of 4_'on each
side and the top, 2,36" on the bottom, and 2' from the

wall Detai_ed installation instructions are inciuded in

the optienai Desktop Stand InstaH_ion,

1. Analog and Digital TV signals provided on antenna

- Wall Antenna _cket or Outdoor Antenna without a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Mutti4amily Dwellings/Apartments

Connect to wail antenna s_ket)

Walt A,_tenna

tnslalladon

, _S°cket

UHF Antenna
VHF Antenna

Turn cbckwi_ totk3hten.

2. Analog and Digital TV signals provided on cable

f

C_le TV Wall

RF Coaxia_ Wire (75 ohm) I

Bronze Wire

Brer_ze Wire

careful not to bend the bronze wire when

connecting the antenna.

J

J

Bronze Wire

Bror_ze VVi_e

Owner's Manual 13

Installation

3, Analog and Digital;TV signals provided on cable and antenna

Antenna Bronze Wire

___ RF Coaxial W!re (75 ohm)

....... i

Cable TV Wall Turn c[ockw_e te tighten.
Jack RF Coaxial Wire (75 ohm)

Bronze Wire

• To improve the picture quality in a poor signal area,
p_ease purchase a signaJ ampBfier and install property.

• If the antenna needs to be splff for two TV's, install a "2-
Way Signal Sp_itteP in the connections.

. [f the ar4enna is not insf_3[led properly, contact your deal-

er for assis_nce.

- To avoid picture noise (interference), leave an adequate dis_nce between the VCR and TV

- Use the _SM Method (on the Option menu) feature to avoid having a fixed image remain on the screen fern tong period of tjrrre_
[f the 4::3 picture format is used; the fixed images on the sides of the screen may remain visibie on the screen.

_iiiiii!iiiiii!!ii_i_iiiiiiiiiiiii

Connection Option 1

Set VCR output switch to charmer 3 or 4 and
then tune the TV to the same channe_ number_

Connection Option 2
1, Connect the audio and video cables from the

VCR's output jacks to the FV input jacks, as
shown in the figure,
When connecting the TV to VCR, match the

jack colors (Video = yellow, Audio Left = white,

and Audio Right = red).
[f you connect an S-WDEO output from VCR to

the S-V[DEO input the picture quality is

improved; compared to connecting a regular
VCR to the Video input.

2, Insert a video tape into the VCR and press

PLAY on the VCR, (Refer to the VCR owner's

manua4,)

& Select the input source with using the

TV/VIDEO button on the remote control Note
that this TV finds the connected input sources

automatically for Video, Front Video and
Com_nent 1-2_ _t is presumed that RGB and

HDMt/DVI sources are connected

Do not connect to both Video and
S-Video at the same t_me_

t4 Plasma TV

[] []

VCR Rear