LG 42LT76-ZA, 37LT76, 32LT76, 42LT76 User Manual

Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV.

Refer to the label on the back cover and quote this information. To your dealer when requiring service.

LCD TV PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

3322LLTT77

3377LLTT77

4422LLTT77

PLASMA TV MODELS

4422PPTT88

5500PPTT88

ENGLISH

Trademark of the DVB Digital Video Broadcasting Project (1991 to 1996)

IIDD NN uu mmbbee rr((ss)) ::

4652: 42PT85 4651: 50PT85 4681: 32LT75 4680: 37LT75 4679: 42LT75 5502: 32LT76 5503: 37LT76 5504: 42LT76

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

Owner's Manual

Owner’s manual

Owner’s Manual

Batteries

INPUT

MODE

D/A

DVD

E XIT

TIME

SHIFT

TIME

SHIFT

VOL PR

GUIDE

B A

C K

M EN

DVR

LIVE TV

VCR

POWER

123

456

789

Q.VIEW

LIST

INDEX

S LE

E P

HOLD

R E

V E A

SUBTITLE

R A

T IO

TEXT

INPUT

BRIGHT

MUTE

MARK

TV/RADIO

UPDATE

SIMPLINK

INFO i

FAV

TIM

I/II

Remote Control

Power Cord

Cable Management

LLCCDD TTVV mmooddeellss

4-bolts for stand assembly

Refer to p. 9

3322//3377 LLTT77**oo nnllyy

Polishing Cloth

Polishing cloth for use on the screen

This feature is not available

for all models.

*Lightly wipe any stains or fingerprints on

the surface of the TV with the polishing cloth.

Do not use excessive force. This may cause scratching or discolouration.

3322//3377 LLTT77**oo nnllyy

1-screw for stand fixing

Refer to p. 9

ACCESSORIES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PREPARATION

Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 5

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 7

Stand installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

ATTACHING THE TV TO A DESK (Only 32/37LT7*model) . . .9

Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . 10

Back Cover for Wire Arrangement . . . . . . . . . . . . . 11

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . 13

Wall Mount: Horizontal installation . . . . . . . . . . . . 13

Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 14

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 15

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Insertion of CI module . . . . . . . . . . . . . . . . . . . . . . 19

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . . 22

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 23

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

- Screen Setup for PC Mode . . . . . . . . . . . . . . . 27

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions . . . . . . . . . . . . . . . . 31

Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 34

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 34

On-Screen Menus Selection and Adjustment . . . . 35

Auto Programme Tuning (In Digital Mode) . . . . . . 36

Manual Programme Tuning (In Digital Mode) . . . . 37

Programme Edit (In Digital Mode) . . . . . . . . . . . . . 38

5V antenna Power (In Digital Mode only) . . . . . . . 40

Booster (In Digital Mode only) . . . . . . . . . . . . . . . 40

Software Update (In Digital Mode only) . . . . . . . . 41

Diagnostics (In Digital Mode only) . . . . . . . . . . . . 42

CI Information (In Digital Mode only) . . . . . . . . . . 43

Auto Programme Tuning (In Analogue Mode) . . . . . 44

Manual Programme Tuning (In Analogue Mode)

. . . . . . . 45

Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . . 46

Assigning a Station Name (In Analogue Mode)

. . . . . . 46

Programme Edit (In Analogue Mode)

. . . . . . . . . . . . . 47

Selecting the Programme Table . . . . . . . . . . . . . . 49

Input Source Selection . . . . . . . . . . . . . . . . . . . . . 50

SIMPLINK Function . . . . . . . . . . . . . . . . . . . . . . . . . 51

DVR (DIGITAL VIDEO RECORDER)

TimeShift Mode ( Pause & Replay of Live TV) . . . 53

Instant Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Manual Recording

. . . . . . . . . . . . . . . . . . . . . . . . . . 59

Recorded TV Programme List . . . . . . . . . . . . . . . . . 60

Schedule List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Record Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Format Hard Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 66

EPG (Electronic programme guide)(In Digital Mode)

Switch on/off EPG . . . . . . . . . . . . . . . . . . . . . . . . 67

Select programme . . . . . . . . . . . . . . . . . . . . . . . . 67

Button function in NOW/NEXT guide mode . . . 67

Button function in 8 days guide mode . . . . . . . . 68

Button function in date change mode . . . . . . . . 69

Button function in extended description box . . . 69

Record Popup . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Conflict pop-up . . . . . . . . . . . . . . . . . . . . . . . . . .70

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . 71

Preset Picture Settings

- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . 73

Auto Colour Tone Control (Warm/Medium/Cool)

. . . . .74

Manual Picture Adjustment

- Picture Mode-User option . . . . . . . . . . . . . . . . 75

- Colour Tone - User option . . . . . . . . . . . . . . . .76

CONTENTS

XD - Picture Improvement Technology . . . . . . . . . . . . . 77

XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . 79

Advanced - Black(Darkness) Level . . . . . . . . . . . . . 80

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Image Sticking Minimization(ISM) Method . . . . . . . . . . 82

Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . 83

SOUND & LANGUAGE CONTROL

Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 84

Preset Sound Settings - Sound Mode . . . . . . . . . . 85

Sound Setting Adjustment - User Mode . . . . . . . . . . 86

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . . 88

Selecting digital audio out . . . . . . . . . . . . . . . . . . . 89

I/II

Stereo/Dual Reception (In Analogue Mode Only)

. . . . 90

NICAM Reception (In Analogue Mode Only) . . . . . . .

- Speaker Sound Output Selection . . . . . . . . . . 91

On-Screen Menus Language/Country Selection

. . . . . . . 92

Language selection (In Digital Mode only) . . . . . . 93

TIME SETTING

Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Auto On/ Off Timer Setting . . . . . . . . . . . . . . . . . . 95

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . 96

Time zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . 97

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . 98

Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

TELETEXT

Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Special Teletext Functions . . . . . . . . . . . . . . . . . . . 101

DIGITAL TELETEXT

Teletext within Digital Service . . . . . . . . . . . . . . 102

Teletext in Digital Service . . . . . . . . . . . . . . . . . 102

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Product Specifications . . . . . . . . . . . . . . . . . . . . . 106

Programming the Remote Control . . . . . . . . . . . . 107

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

External Control Device Setup . . . . . . . . . . . . . . . 111

PREPARATION

HOME MENU

This menu is a contents guide. In the Home Menu, you can access the Recorded list of the DVR, Manual Recording of the DVR,

Schedule List or the TV Menu.

INPUT MODE

D/A

DVD

EXIT

TIME SHIFT

VOL PR

GUIDE

BACK MENU

DVR

LIVE TV

VCR

POWER

TEXT

INPUT

BRIGHT

MUTE

MARK

TV/RADIO

SIMPLINK

INFO i

FAV

Home

Free Space

Programme Guide

Recorded TV

Schedule List

Manual Record

TV Menu

DVR

pp..5533

EPG

pp..6677

TV Menu

pp..3355

This displays the remaining record time for analogue input. (Analog TV, AV1,AV2, AV3)

This displays the remaining record time for DTV input.

FRONT PANEL CONTROLS

This is a simplified representation of the front panel. Image shown may differ from your TV.

If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.

PREPARATION

VOL

INPUT

PROGRAMME

VOLUME

INPUT

POWER

Plasma TV Models

Remote Control Sensor

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the TV is switched on.

PREPARATION

LCD TV Models

Remote Control Sensor

Power/Standby Indicator

• illuminates red in standby mode.

• illuminates green when the TV is switched on.

PROGRAMME

VOLUME

INPUT

POWER

Intelligent Eye

Adjusts picture according to the surrounding conditions.

VOL

INPUT

USB

AV IN 2

L/ MONO

AUDIO

VIDEO

S-VIDEO

Plasma TV Models

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

ANTENNA IN

1 32

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

HDMI Input

Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

DIGITAL AUDIO OUT (OPTICAL)

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Antenna Input

Connect RF antenna (UHF) to this jack.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Component Input

Connect a component video/audio device to these jacks.

RGB/DVI Audio Input

Connect the monitor output from a PC to the appropriate input port.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

84 5 6 7

BACK PANEL INFORMATION

This is a simplified representation of the back panel. Image shown may differ from your TV.

PREPARATION

EJECT

CARD SLOT

HDMI/DVI IN

(CONTROL & SERVICE)

HDMI IN

COMPONENT IN

RGB(PC)

DIGITAL AUDIO OUT

(OPTICAL)

RGB IN

AUDIO

(RGB/DVI)

PREPARATION

LCD TV Models

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

ANTENNA IN

84 5 6 7

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

HDMI Input

Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

DIGITAL AUDIO OUT (OPTICAL)

Connect digital audio from various types of equipment.

Note: In standby mode, these ports do not work.

Antenna Input

Connect RF antenna (UHF) to this jack.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Component Input

Connect a component video/audio device to these jacks.

RGB/DVI Audio Input

Connect the monitor output from a PC to the appropriate input port.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

3322LLTT77

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

3377LLTT77

4422LLTT77

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

HDMI/DVI IN

(CONTROL & SERVICE)

HDMI IN

RGB(PC)

DIGITAL AUDIO OUT

(OPTICAL)

RGB IN

AUDIO

(RGB/DVI)

COMPONENT IN

PREPARATION

STAND INSTALLATION (Only 32/37LT7

model)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

ATTACHING THE TV TO A DESK (Only 32/37LT7

model)

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

1-Screw

Stand

Desk

WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

PREPARATION

ATTACHING THE TV TO A WALL

(This feature is not available for all models.)

■

Position the TV close to the wall to avoid the possibility of it falling when pushed.

■

The instructions shown below are a safer way to

set up the TV, which is to fix it to the wall, avoiding the

possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.

This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

NOTE

When moving the TV undo the cords first.

Use a platform or cabinet string and large enough to support the size and weight of the TV.

To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with bolts (must purchase seperately) to the wall. Ensure that both brackets are even.

Use a strong cord (must purchase separately) to secure the TV. Secure the cord in such a way that it becomes taught when the TV is in position.

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Plasma TV models

Connect the cables as necessary. To connect additional equipment, see the External equipment Setup section of the manual.

Reinstall the

CC AABB LL EE MMAANNAAGGEE MMEENNTT

as shown.

Grip the CABLE MANAGEMENT and push the cover upwards.

CABLE MANAGEMENT

PREPARATION

LCD TV models

Connect the cables as necessary.

To connect additional equipment, see the

External equipment Setup section.

Install the

CC AABB LL EE MMAANNAAGGEE MMEENNTT

as shown.

Hold the

CC AABBLLEE MMAA NN AAGGEEMMEENN TT

with both

hands and pull it upward.

NOTE

Do not use the CABLE MANAGEMENT to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

How to remove the cable management

CABLE MANAGEMENT

Desktop Pedestal Installation

For adequate ventilation allow a clearance of 4” (10cm) all around the TV .

Wall Mount: Horizontal installation

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit

breaker

■

The TV can be installed in various ways such as on a wall, or on a desktop etc.

■

The TV is designed to be mounted horizontally.

4 inches

4 inches 4 inches 4 inches

4 inches

4 inches 4 inches

4 inches

PREPARATION

AV 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

AV 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Outdoor Antenna (VHF, UHF)

Wall Antenna Socket

RF Coaxial Wire (75 ohm)

ANTENNA CONNECTION

Antenna

UHF

Signal Amplifier

VHF

■

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the

antenna as shown above.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

- 5V antenna power works In Digital mode only. (Refer to p. 40)

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/MONO

AUDIO

VIDEO

S-VIDEO

USB

AV IN 2

L/MONO

AUDIO

VIDEO

S-VIDEO

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

■

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

RS-232C IN

VIDEO

EJECT

PCMCIA

CARD SLOT

RS-232C IN

ANTENNA IN

Connecting with a component cable

Connect the video outputs (Y, PB, PR

)

of the digital set

top box to the

CC OOMMPPOONNEENN TT IINN VVIIDD EEOO

jacks on the

TV.

Connect the audio output of the digital set-top box to the

CC OOMMPPOONNEENN TT IINN AA UUDDII OO

jacks on the TV.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

COMPONENT input source using the

II NN PPUUTT

button on the remote control.

Signal

480i/576i

480p/576p

720p/1080i

10 8 0 p

Component

Yes

HDMI1/2

Yes

1 2

■

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the Plasma TV models.

EXTERNAL EQUIPMENT SETUP

AUDIO

VIDEO

AV 1 AV 2

RS-232C IN

AUDIO

VIDEO

AV 1 AV 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

ANTENNA IN

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1V 1 AV 2

RS-232C IN

(CONTROL & SERVICE)

(OPTICAL)

DIGITAL AUDIO OUT

HDMI/DVI IN

HDMI IN

AUDIO

VIDEO

AV 1 AV 2

RS-232C IN

Connect the digital set-top box to

HHDDMMII//DDVVII IINN

jack

on the TV.

Connect the audio output of the digital set-top box to the

AAUU DDIIOO IINN (( RRGGBB//DDVVII))

jack on the TV.

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1 input source using the

II NN PPUUTT

button

on the remote control.

Connecting a set-top box with an HDMI cable

Connect the digital set-top box to

HHDDMMII//DDVVII IINN

HHDDMMII II NN

jack on the TV.

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

Select

HDMI1 or HDMI2 input source using the

II NN PPUUTT

button on the remote control.

Connecting with a HDMI to DVI cable

HDMI/DVI IN

(CONTROL & SERVICE)

HDMI IN

COMPONENT IN

DIGITAL AUDIO OUT

RGB IN

RGB(PC)

(OPTICAL)

AUDIO

(RGB/DVI)

DVD SETUP

Connecting with a component cable

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

RS-232C IN

(CONTROL & SERVICE)

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

B-Y

R-Y

Connect the video outputs (Y, PB, PR

)

of the DVD to the

CC OOMMPPOONNEENN TT IINN VVIIDDEEOO

jacks on the TV.

Connect the audio outputs of the DVD to the

CC OOMMPPOONNEENN TT IINN AA UUDDII OO

jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

COMPONENT input source using the

II NN PPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

EXTERNAL EQUIPMENT SETUP

Connecting with a Euro Scart cable

Connect the Euro scart socket of the DVD to the

AA VV11

Euro scart socket on the TV.

Turn on the DVD player, insert a DVD.

Select

AV 1 input source using the

II NN PPUUTT

button on

the remote control. If connected to

AV 2 Euro scart socket, select AV 2

input source.

Refer to the DVD player's manual for operating instructions.

AUDIO

(RGB/DVI)

GB IN

AV 1 AV 2

(OPTICAL)

AUDIO

(R) AUDIO (L)

AUDIO/ VIDEO

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

AV 1 AV 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

ANTENNA IN

AUDIO

VIDEO

NOTE

Any Euro scart cable used must be signal protected.

Connecting with a S-Video cable

L R

S-VIDEOVIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEOS-VIDEO

Connect the S-VIDEO output of the DVD to the

SS --

VV IIDD EEOO

input on the TV.

Connect the audio outputs of the DVD to the

AA UUDDII OO

input jacks on the TV.

Turn on the DVD player, insert a DVD.

Select

AV 3 input source using the

II NN PPUUTT

button on

the remote control.

Refer to the DVD player's manual for operating instructions.

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

AV 1 AV 2

RS-232C IN

(CONTROL & SERVICE)

(OPTICAL)

DIGITAL AUDIO OUT

HDMI/DVI IN

HDMI IN

COMPONENT IN

AUDIO

VIDEO

Connecting the HDMI cable

Connect the HDMI output of the DVD to the

HHDDMMII//DDVVII

IINN

HHDDMMII IINN

jack on the TV.

Select

HDMI1or HDMI2 input source using the

II NN PPUUTT

button on the remote control.

Refer to the DVD player's manual for operating instructions.

Insert the CI Module to

PPCCMMCCIIAA

(Personal Computer

Memory Card International Association)

CC AA RRDD SS LL OOTT

of TV as shown.

For further information, see p.43.

The TV can receive video and audio signals simultaneously when using a HDMI cable.

If the DVD player does not support Auto HDMI, you must TV the output resolution appropriately.

NOTE

INSERTION OF CI MODULE

AV 1 AV 2

EJECT

PCMCIA

CARD SLOT

RS-232C IN

(CONT

HDMI/

ANTENNA IN

AUDIO

VIDEO

TVTV

-- TToo vvii eeww tthhee ssccrraammbb ll eedd ((ppaayy )) ss eerr vv ii cceess iinn ddiigg iittaall TTVV mmooddee ..

-- TT hhii ss ffeeaa tt uurree ii ss nnoott aavvaaii ll aabbllee iinn aallll ccoo uunnttrr ii eess..

EXTERNAL EQUIPMENT SETUP

Connecting with a RF cable

■

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

■

If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible. (Only Plasma TV models)

VIDEO

EJECT

PCMCIA

CARD SLOT

RS-232C IN

(CONTROL & SERVICE)

AUDIO

OUTPUT SWITCH

ANT IN

S-VIDEO VIDEO

ANT OUT

ANTENNA IN

Wall Jack

Antenna

Connect the

AA NN TT OO UUTT

socket of the VCR to the

AANN TTEE NN NN AA II NN

socket on the TV.

Connect the antenna cable to the

AA NN TT IINN

socket of the VCR.

Press the

PPLL AAYY

button on the VCR and match the appropriate programme between the TV and VCR for

viewing.

VCR SETUP

Connecting with a Euro Scart

Connect the Euro scart socket of the VCR to the

AA VV11

Euro scart socket on the TV.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

Select

AV 1 input source using the

II NN PPUUTT

button on

the remote control.

If connected to

AA VV22

Euro scart socket, select

AV 2

input source.

VIDEO

EJECT

PCMCIA

CARD SLOT

RS-232C IN

AUDIO

(RGB/DVI)

RGB IN

AV 1 AV 2

(OPTICAL)

DIGITAL AUDIO OUT

AUDIO

(R) AUDIO (L)

AUDIO/ VIDEO

AV IN 3

ANTENNA IN

NOTE

Any Euro Scart cable used must be signal shielded.

Connecting with an RCA cable

S-VIDEO

VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN 3

L/ MONO

AUDIO

VIDEO

S-VIDEO

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

Connect the

AA UUDDIIOO/VV IIDD EEOO

jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

Select

AV 3 input source using the

II NN PPUUTT

button on

the remote control.

If you have a mono VCR, connect the audio cable from the

VCR to the

AAUUDDII OO LL//MMOONNOO

jack of the TV.

NOTE

EXTERNAL EQUIPMENT SETUP

If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

NOTE

S-VIDEO

VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

Connecting with a S-Video cable

Connect the S-VIDEO output of the VCR to the

SS --

VV IIDD EEOO

input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input.

Connect the audio outputs of the VCR to the

AA UUDDII OO

input jacks on the TV.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

Select

AV 3 input source using the

IINNPPUUTT

button on the

remote control.

1 2

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical)port.

Do not look into the optical output port. Looking at the laser beam may damage your vision.

CAUTION

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

AV 1 AV 2

HDMI IN

(OPTICAL)

DIGITAL AUDIO OUT

COMPONENT IN

AUDIO

VIDEO

Connect one end of an optical cable to the TV Digital Audio (Optical)Output port.

Connect the other end of the optical cable to the digital audio (optical)input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu. (

pp..8888

). Refer to the external audio equipment

instruction manual for operation.

OTHER A/V SOURCE SETUP

Connect the

AA UUDDII OO/VV IIDD EEOO

jacks between TV and external equipment. Match the jack colours

(

Video = yellow, Audio Left = white, and Audio Right = red

)

Select AV 3 input source using the

II NN PPUUTT

button on the remote control.

Operate the corresponding external equipment. Refer to external equipment operating guide.

L R

VIDEO

AV IN 3

L/MONO

AUDIOAUDIO

VIDEOVIDEO

S-VIDEO

Camcorder

Video Game Set

EXTERNAL EQUIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connecting with a D-sub 15 pin cable

AV 1 AV 2

RS-232C INRS-232C IN

(CONTROL & SERVICE)

COMPONENT IN

AUDIOAUDIO

VIDEO

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

RGB OUTPUT

AUDIO

Connect the RGB output of the PC to the

RR GGBB ((PP CC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDII OO IINN

((RRGG BB//DDVVII))

jack on the TV.

Turn on the PC and the TV.

Select

RGB input source using the

II NN PPUUTT

button on

the remote control.

1 2

Connecting with a HDMI to DVI cable

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.

If the PC does not support Auto DVI, you need to set the output resolution appropriately.

NOTE

AV 1 AV 2

EJECT

RS-232C IN

ANTENNA IN

AUDIO

VIDEO

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

COMPONENT IN

AUDIO

VIDEO

AV 1 AV 2

RS-232C INRS-232C IN

(CONTROL & SERVICE)

(OPTICAL)

DIGITAL AUDIO OUT

HDMI/DVI IN

HDMI IN

DVI-PC OUTPUT

AUDIO

Connect the DVI output of the PC to the

HHDDMMII//DDVV II

II NN

jack on the TV.

Connect the PC audio output to the

AAUUDDII OO II NN

((RRGG BB//DDVVII))

jack on the TV.

Turn on the PC and the TV.

Select

HDMI1 input source using the

II NN PPUUTT

button

on the remote control.

NOTE

To enjoy vivid picture and sound, connect the PC to the TV.

Avoid keeping a fixed image on the TV ’s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible.

Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution output of PC accordingly.

There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

RGB input only supports the separate horizontal and vertical synchronization pulses in separate channels.

We recommend using 1360x768, 60Hz (LCD TV models / 50PT8* models) / 1024x768, 60Hz (42PT8* models) for the PC mode, these should provide the best picture quality.

Connect the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

Connect the audio cable from the PC to the Audio

input on the TV. (Audio cables are not included with the TV).

If using a sound card, adjust PC sound as required.

This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV.

DDC protocol is preset for RGB (Analogue RGB), HDMI (Digital RGB) mode.

If required, adjust the settings for Plug and Play functionality.

If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.

If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)

DOS mode may not work depending on the video card if you use a HDMI to DVI cable.

If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

EXTERNAL EQUIPMENT SETUP

1366x768

70.08

59.94

75.00

60.31

75.00

74.55

60.00

70.00

75.029

59.87

59.8

59.6

59.988

31.468

31.469

37.684

37.879

46.875

49.725

48.363

56.476

60.123

47.78

47.72

47.56

66.647

Supported Display Resolution

Resolution

720x400

640x480

Horizontal

Frequency(KHz)

Vertical

Frequency(Hz)

800x600

832x624

1024x768

1280x768

1360x768

RGB[PC] / HDMI[PC] mode

1920x1080

640x480

720x480

720x576

1280x720

1920x1080

59.94

60.00

59.94

60.00

50.00

59.94

60.00

59.94

60.00

50.00

24.00

50.00

59.94

60.00

31.469

31.47

31.50

31.25

37.50

44.96

45.00

33.72

33.75

28.125

27.00

56.25

67.433

67.500

HDMI[DTV] mode

Resolution

Horizontal

Frequency(KHz)

Vertical

Frequency(Hz)

Screen Setup for PC mode

Automatically adjusts picture position and minimizes image instability.

After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.

AAuuttoo ccoo nnff iigguurr ee

This function is for automatic adjustment of the screen position, clock, and phase. The displayed image will be unstable for a few seconds while the auto configuration is in progress.

Press the

MMEE NNUU

button and then use

button

to select the SCREEN menu.

Press the

button and then use

button to

select Auto Config..

Press the

button to start Auto Config..

• When Auto Config. has finished, OK will be shown on screen.

• If the position of the image is still not correct, try Auto adjustment again.

• If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Manual Config..

Press the EXIT button to return to normal TV viewing.

Auto Configure (RGB [PC] mode only)

Auto Config. G Manual Config. XGA Mode Aspect Ratio Reset

To Set

EXIT

TIME SHIFT

VOL PR

GUIDE

BACK MENU

DVR

MARK

FAV

Auto Config. Manual Config. XGA Mode Aspect Ratio Reset

SETUP

PICTURE

Prev.

Move

AUDIO

TIME

OPTION

SCREEN

D V R

EXTERNAL EQUIPMENT SETUP

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.

To correct the screen size, adjust

CC ll oocckk

This function works in the following mode : RGB[PC].

CC ll oocckk

This function is to minimize any vertical bars or stripes visible on the screen background the horizontal screen size will also change.

PPhh aass ee

This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Press the MENU button and then use

button

to select the SCREEN menu.

Press the

button and then

button to select

Manual Config..

Press the

button and then

button to select

Phase, Clock, H-Position or V-Position.

Press the

button to make appropriate adjust-

ments.

Press the EXIT button to return to normal TV viewing.

Adjustment for screen Phase, Clock, Position

Auto Config. Manual Config.

XGA Mode Aspect Ratio Reset

Phase Clock H-Position V-Position

EXIT

TIME SHIFT

VOL PR

GUIDE

BACK MENU

DVR

MARK

FAV

3 4

Auto Config. Manual Config. XGA Mode Aspect Ratio Reset

SETUP

PICTURE

Prev.

Move

AUDIO

TIME

OPTION

SCREEN

D V R

+ 90 hidden pages