QUICK REFERENCE GUIDE
LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
32LS341C
42LS341C
P/NO : MFL67415436 (1211-REV00) |
www.lg.com |
<![endif]>ENGLISH
2 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
yyDo not use this apparatus near water.
yyClean only with a dry cloth.
yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT SAFETY INSTRUCTIONS 3 |
||||||||
|
|
|
||||||||||||||||||
yyProtect the power cord from being walked on |
yyKeep the packing anti-moisture material or |
|||||||||||||||||||
or pinched particularly at plugs, convenience |
vinyl packing out of the reach of children. |
|||||||||||||||||||
receptacles, and the point where they exit |
Anti-moisture material is harmful if |
|||||||||||||||||||
from the apparatus. |
swallowed. If swallowed by mistake, force |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
the patient to vomit and visit the nearest |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
hospital. Additionally, vinyl packing can |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
cause suffocation. Keep it out of the reach of |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
children. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
yyOnly use attachments/accessories specified |
yyCAUTION concerning the Power Cord |
|||||||||||||||||||
by the manufacturer. |
(Can differ by country): |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
It is recommended that appliances be |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
placed upon a dedicated circuit; that is, a |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
single outlet circuit which powers only that |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
yyUse only with a cart, stand, tripod, bracket, |
appliance and has no additional outlets or |
|||||||||||||||||||
or table specified by the manufacturer, or |
branch circuits. Check the specification page |
|||||||||||||||||||
sold with the apparatus. When a cart is used, |
of this owner’s manual to be certain. Do not |
|||||||||||||||||||
use caution when moving the cart/apparatus |
connect too many appliances to the same |
|||||||||||||||||||
combination to avoid injury from tip-over. |
AC power outlet as this could result in fire or |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
electric shock. Do not overload wall outlets. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Overloaded wall outlets, loose or damaged |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
wall outlets, extension cords, frayed power |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
cords, or damaged or cracked wire insulation |
||||||||
yyUnplug this apparatus during lightning |
are dangerous. Any of these conditions could |
|||||||||||||||||||
storms or when unused for long periods of |
result in electric shock or fire. Periodically |
|||||||||||||||||||
time. |
examine the cord of your appliance, and |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
if its appearance indicates damage or |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
deterioration, unplug it, discontinue use of |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
the appliance, and have the cord replaced |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
with an exact replacement part by an |
||||||||
yyRefer all servicing to qualified service |
authorized service. Protect the power cord |
|||||||||||||||||||
personnel. Servicing is required when |
from physical or mechanical abuse, such as |
|||||||||||||||||||
the apparatus has been damaged in any |
being twisted, kinked, pinched, closed in a |
|||||||||||||||||||
way, such as power-supply cord or plug is |
door, or walked upon. Pay particular attention |
|||||||||||||||||||
damaged, liquid has been spilled or objects |
to plugs, wall outlets, and the point where |
|||||||||||||||||||
have fallen into the apparatus, the apparatus |
the cord exits the appliance. Do not move |
|||||||||||||||||||
has been exposed to rain or moisture, does |
the TV with the power cord plugged in. Do |
|||||||||||||||||||
not operate normally, or has been dropped. |
not use a damaged or loose power cord. Be |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
sure do grasp the plug when unplugging the |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
power cord. Do not pull on the power cord |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
to unplug the TV. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
yyDo not stick metal objects or any other |
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
||||||||||||
conductive material into the power cord. Do |
|
|
|
|
|
|
|
|
|
|||||||||||
not touch the end of the power cord while it |
|
|
|
|
|
|
|
|
|
|||||||||||
is plugged in. |
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
yyGrounding
(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply
Short-circuit
Breaker
yyDISCONNECTING THE MAIN POWER
The power outlet used with this device must remain easily accessible.
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
yyANTENNAS Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
Antenna Discharge Unit |
||||||||
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electric Service |
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
Equipment |
|
|
|
|
|
|
|
|
|
Grounding Conductor |
|||
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
|
|
|
|
|
|
|
|
|
|
Power Service Grounding
NEC: National Electrical Code Electrode System
(NEC Art 250, Part H)
yyCleaning
When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
yyMoving
Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
yyVentilation
Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.
IMPORTANT SAFETY INSTRUCTIONS 5
yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.
yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.
yyKeep the product away from direct sunlight.
yyNever touch this apparatus or antenna during a thunder or lightning storm.
yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
yyDot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the performance and reliability of the TV.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
yyTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.
yyIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
Preventing “Image burn” or “Burn-in” on your TV screen
yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit 'http://opensource.lge.com'.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
TABLE OF CONTENTS
2 IMPORTANT SAFETY INSTRUCTIONS
6 LICENSES
6OPEN SOURCE SOFTWARE NOTICE
7TABLE OF CONTENTS
8INSTALLATION PROCEDURE
8 ASSEMBLING AND PREPARING
8 Unpacking
10Parts and buttons
11Lifting and moving the TV
12Setting up the TV
12 - Attaching the stand
15- Mounting on a table
16- Mounting on a wall
17- Tidying cables
18REMOTE CONTROL
20 SPECIFICATIONS
22 GENERAL TROUBLESHOOTING
TABLE OF CONTENTS 7
<![if ! IE]><![endif]>ENGLISH
NOTE
yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this
manual.
yyThe available menus and options may differ from the input source or product model that you are using.
yyNew features may be added to this TV in the future.
<![endif]>ENGLISH
8 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off. yyPower Cord Installation Guide
-If the power cord provided with the TV looks like the below picture, please ensure that it is inserted in the correct direction.
TV
Power Cord |
Correct |
Wrong |
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.
AA
*A 10 mm *B
18 mm
ASSEMBLING AND PREPARING 9
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick Reference Guide |
|
Power Cord |
||
Remote Control, |
|
|
|||||||
Batteries (AAA) |
|
|
|
|
|
|
|||
(See p.18) |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
(For 32LS341C) |
|
(For 42LS341C) |
|
|
Stand Body, Stand Base |
|
Stand Body, Stand Base |
|
Desk-mount Screw |
(See p.12) |
|
(See p.13) |
|
(See p.15) |
|
|
|
|
|
(For 32LS341C) |
|
(For 42LS341C) |
|
|
Stand Screws |
|
Stand Screws |
Cable Holder |
|
2 EA, P4 x 16 |
|
4 EA, P4 x 16 |
(See p.17) |
|
4 EA, M4 x 20 |
|
4 EA, M4 x 14 |
|
|
(See p.12) |
|
(See p.13) |
|
|
|
|
|
|
|
(For 32LS341C) |
|
|
|
|
<![endif]>ENGLISH
Protection Cover
(See p.14)
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
Parts and buttons
Side Connection Panel
Screen
USB Input |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>USB |
||
|
Speakers
VIDEO |
AV IN |
AUDIO R |
ANTENNA |
CABLE |
L/MONO |
||||
|
|
|
IN |
IN |
IN |
1 |
2 |
Y |
PB |
P |
|
VIDEO |
AUDIO |
COMPONENT IN
Buttons
OK
SETTINGS
INPUT
Remote Control and
Intelligent Sensors1
Power Indicator
Rear Connection Panel
|
Buttons |
Description |
|
|
|
( / I) |
Turns the power on or off. |
|
|
|
|
(INPUT) |
Changes the input source. |
|
|
|
|
(SETTINGS) |
Accesses the main menus, or saves your input and exits the menus. |
|
|
|
|
(OK ) |
Selects the highlighted menu option or confirms an input. |
|
|
|
|
/ |
(+ / -) |
Adjusts the volume level. |
|
|
|
/ |
(^ / v) |
Scrolls through the saved channels. |
|
|
|
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ASSEMBLING AND PREPARING 11
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as this may result in damage to the screen.
yyIt is recommended to move the TV in the box or packing material that the TV originally came in.
yyBefore moving or lifting the TV, disconnect the power cord and all cables.
yyWhen holding the TV, the screen should face away from you to avoid damage.
yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
yyWhen transporting a large TV, there should be at least 2 people.
yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.
yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
<![endif]>ENGLISH
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.
For 32LS341C
1 |
2 |
|
2 EA |
|
P4 x 16 |
|
Stand Body |
|
Stand Base |
3
4 EA
M4 x 20
ASSEMBLING AND PREPARING 13
For 42LS341C
1 |
|
2 |
|
|
|
4 EA
P4 x 16
Stand Body
Stand Base
3
<![endif]>ENGLISH
4 EA
M4 x 14
14 ASSEMBLING AND PREPARING
To detach the stand,
(Depending on model)
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
yyWhen installing the wall mounting bracket, use the Protection cover. This will protect the opening from accumulating dust and dirt.
4 EA
<![if ! IE]><![endif]>ENGLISH
NOTE
(For 32LS341C)
yyWhen removing the Protection Cover from bottom of TV, insert your fingers into hole of cover. Hold firmly and pull upwards towards you to remove.
Protection Cover
|
|
ASSEMBLING AND PREPARING 15 |
||
Mounting on a table |
|
|
||
|
Securing the TV to a table |
|
||
|
Fix the TV to a table to prevent from tilting |
|||
1 Lift and tilt the TV into its upright position on a |
forward, damage, and potential injury. |
|||
table. |
To secure the TV to a table, insert and tighten the |
|||
- Leave a 10 cm (minimum) space from the wall |
supplied screw on the rear of the stand. |
|||
|
|
|
|
10
2 Connect the power cord to a wall outlet.
Caution
yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
(Depending on model)
Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
CAUTION
adjusting the angle of the TV, watch out for your fingers.
-Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
warning
yyTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the TV
NOTE
y Kensington security system is optional. You can obtain additional accessories from your local dealer.
<![endif]>ENGLISH