LG 42LH90QD, 42LH50YD Owner’s Manual

DVB is a registered trademark of the DVB Project

ID Number(s):

6548 : 22LU50FD

6550 : 26LU50FD

6530 : 22LH20D

6531 : 26LH20D

6532 : 32LH20D

6533 : 37LH20D

6534 : 42LH20D

6535 : 32LH35FD

6536 : 37LH35FD

6537 : 42LH35FD

6538 : 32LH50YD

6539 : 37LH50YD

6540 : 42LH50YD

6541 : 47LH50YD

6542 : 55LH50YD

6545 : 42LH90QD

6546 : 47LH90QD

6680 : 37SL80YD

6679 : 42SL80YD

6678 : 47SL80YD

6677 : 55SL80YD

<![if ! IE]>

<![endif]>ENGLISH

LCD TV

OWNER’S MANUAL

LCD TV MODELS

22LU5*** 32LH5*** 26LU5*** 37LH5*** 22LH2*** 42LH5*** 26LH2*** 47LH5*** 32LH2*** 55LH5*** 37LH2*** 42LH9*** 42LH2*** 47LH9*** 32LH3*** 37SL8*** 37LH3*** 42SL8*** 42LH3*** 47SL8***

55SL8***

Please read this manual carefully before operating your TV.

Retain it for future reference.

Record model number and serial number of the TV. Refer to the label on the back cover and quote this information.

To your dealer when requiring service.

(Only for Australia & New Zealand)

This product qualifies for ENERGY STAR in the “factory default (Home Use mode)” setting and this is the setting in which power savings will be achieved.

Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

■ Here shown may differ from your TV.

			POWER		POWER
			ON/OFF
				TV/RAD
				AV MODE		ENERGYSAVING
				LIST		Q.VIEW
			MARK	or		or
			FAV		MUTE
				MENU		RETURN / EXIT
Owner’s Manual	Batteries	Power Cord		AV MODE

Q.MENU INFO GUIDE MARK

FAV

RATIO

Remote Control

This item is not included for all models.

Polishing Cloth Polishing cloth for use on the screen.

*Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Do not use excessive force. This may cause scratching or discolouration.

	Only 26/32/37/42LH2***, 32/37/42LH3***,			(Only 26LU5***, 26/32/37/42LH2***,
	32/37/42/47/55LH5***, 42/47LH9***			32/37/42LH3***, 32/37/42LH5***, 42LH9***)
	(Except for 55LH5***)
		or
	x 4
	Bolts for stand assembly	Protection cover		1-screw for stand fixing
	(Refer to p.11)	(Refer to p.12)		(Refer to p.13)
	Only 22LH2***	Only 22/26LU5***
				x 2	x 3
		Protection cover		(Only 22LU5***)	(Only 26LU5***)
	Cable management clip		Cable Holder	Bolts for stand assembly
	(Refer to p.14)	(Refer to p.12)
			(Refer to p.15)	(Refer to p.11)

Wall Mounting Bracket(Separate purchase)
RW120	RW230	AW-47LG30M

(22LU5***, 22LH2***)

(26LU5***, 26/32LH2***,

32LH3***, 32LH5***)

(Only 32/37/42LH2***, 32/37/42LH3***, 32/37/42/47LH5***, 42/47LH9***)

AW-55LH40M

(55LH5***)

<![if ! IE]>

<![endif]>ACCESSORIES

1

CONTENTS

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

	PREPARATION
<![if ! IE]> <![endif]>CONTENTS	Not Using the Desk-type Stand ...............................	12
	Front Panel Controls.....................................................	4
	Back Panel Information ................................................	8
	Stand Installation .........................................................	11
	Attaching the TV to a Desk .....................................	13
	Detaching Stand ........................................................	13
	Back Cover for Wire Arrangement ..........................	14
	Positioning your display .........................................	15
	Swivel Stand ..................................................................	15
	Careful installation advice .....................................	15
	Desktop Pedestal Installation ...............................	16
	Wall Mount: Horizontal Installation........................	16
	Antenna Connection...................................................	17
	EXTERNAL EQUIPMENT SETUP
	HD Receiver Setup ......................................................	18
	DVD Setup.....................................................................	21
	VCR Setup.....................................................................	23
	Digital Audio Out Setup ...........................................	25
	Other A/V Source Setup ..........................................	26
	Usb Setup......................................................................	27
	PC Setup........................................................................	28
	- Screen Setup for PC Mode................................	32
	WATCHING TV / PROGRAMME CONTROL
	Remote Control Key Functions ...............................	36
	Turning on the TV ........................................................	42
	Programme Selection ................................................	42
	Volume Adjustment ...................................................	42
	Quick Menu .................................................................	43
	On-Screen Menus Selection and Adjustment.....	44
	Auto Programme Tuning............................................	45
	Manual Programme Tuning (In Digital Mode).....	46
	Manual Programme Tuning (In Analogue Mode)...	47
	Programme Edit ...........................................................	49
	Software Update ...........................................................	51

Diagnostics ...................................................................	52
Selecting the Programme List ..................................	53
Favourite Programme Setup......................................	54
Input List........................................................................	55
Input Label ....................................................................	56
Simple manual ..............................................................	57
.................................................................	58
AV Mode........................................................................	60
Initializing (Reset to original factory settings) .....	61
TO USE A BLUETOOTH
Precautions when using the Bluetooth .................	62
Setting the Bluetooth.................................................	63
Set TV PIN......................................................................	64
Bluetooth headset
- Connecting a new Bluetooth headset .............	65
- Connecting to Bluetooth headset already
registered .................................................................	65
- Disconnecting the Bluetooth headset during use....	66
- When requesting to connect to TV from the
Bluetooth headset....................................................	66
Managing Registered Bluetooth device ................	67
My Bluetooth Information. ........................................	68
Receiving Photos from external Bluetooth device.........	69
Listening to the Musics from external Bluetooth device .....	69
TO USE A USB DEVICE
When connecting a USB device..............................	70
Photo List ......................................................................	71
Music List........................................................................	75
Movie List........................................................................	78
DivX Registration Code..............................................	82
Deactivation...................................................................	83

2

EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
Switch on/off EPG ......................................................	84
Select a Programme....................................................	84
Button Function in NOW/NEXT Guide Mode.......	84
Button Function in 8 Day Guide Mode..................	85
Button Function in Date Change Mode................	85
Button Function in Extended Description Box.........	86
Button Function in Remind Setting Mode.........................	86
Button Function in Schedule List Mode................	86

MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT GROUP) (IN DIGITAL MODE)

Switch on MHEG.........................................................	87
Select a Programme....................................................	87
Button Function in Listing Mode..............................	88
Button Function in NOW/NEXT Guide Mode.......	88
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ......................	89
Picture Wizard................................................................	91
Energy Saving ................................................................	92
Preset Picture Settings
- Picture Mode-Preset............................................	93
Manual Picture Adjustment
- Picture Mode-User option.................................	94
Picture Improvement Technology...........................	95
Expert Picture Control...............................................	96
Picture Reset ................................................................	99
LED Local Dimming.....................................................	99
Power Indicator...........................................................	100
Demo Mode................................................................	101
Mode Setting...............................................................	102
SOUND & LANGUAGE CONTROL
Auto Volume Leveler.................................................	103
Clear Voice II ...............................................................	104
Preset Sound Settings - Sound Mode.................	105
Sound Setting Adjustment -User Mode ..............	106

SRS TruSurround XT .................................................	106
Balance.........................................................................	107
TV Speakers On/ Off Setup....................................	108
Selecting Digital Audio Out ....................................	109
Audio Reset...................................................................	110
Stereo Reception (In Analogue Mode Only)..........	111
Speaker Sound Output Selection..........................	111
Country Selection.............................................................	112
Language Selection (In Digital Mode only)........	113
TIME SETTING
Clock Setup .................................................................	114
Auto On/ Off Time Setting .....................................	115
Sleep Timer Setting ...................................................	116
PARENTAL CONTROL / RATINGS
Set Password & Lock System..................................	117
Block Programme .......................................................	118
Parental Control (In Digital Mode only) .............	119
External Input Blocking.............................................	120
Key Lock.......................................................................	121
TELETEXT
Switch on/off..............................................................	122
SIMPLE Text ................................................................	122
TOP Text......................................................................	122
FASTEXT......................................................................	123
Special Teletext Functions.......................................	123
APPENDIX
Troubleshooting.........................................................	124
Maintenance ..............................................................	126
Product Specifications.............................................	127
IR Codes ......................................................................	130
External Control Device Setup ..............................	132
Open Source Software Notice...............................	139
Open Source License ...............................................	140

<![if ! IE]>

<![endif]>CONTENTS

3

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

FRONT PANEL CONTROLS

CAUTION

G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control).

G Do not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall. G Do not drag the TV. The floor or the product may be damaged.

■ Here shown may be somewhat different from your TV.

Only 22/26/32/37/42LH2***, 32/37/42LH3***

Only 22/26LH2***
	MENU
INPUT		OK	VOLUME	PROGRAMME
POWER				Only 32/37/42LH2***,
				32/37/42LH3***
INPUT	MENU	OK		P
				P		PROGRAMME
						VOLUME
				OK		OK
				MENU		MENU
				INPUT		INPUT
						POWER
Remote Control Sensor
				ON	OFF
				Main Power Switch

Power/Standby Indicator

Except for 22LH2***

•Illuminates red in standby mode.

•Illuminates blue when the TV is switched on.

4

■ Here shown may be somewhat different from your TV.

Only 32/37/42/47/55LH5***

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

•Illuminates red in standby mode.

•Illuminates blue when the TV is switched on.

PROGRAMME

P

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

POWER

OFF ON

Main Power Switch

<![if ! IE]>

<![endif]>PREPARATION

5

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

■ Here shown may be somewhat different from your TV.

Only 42/47LH9***

SPEAKER

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

•Illuminates red in standby mode.

•Illuminates white when the TV is switched on.

P PROGRAMME

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

POWER

Main Power Switch

6

■ Here shown may be somewhat different from your TV.

Only 22/26LU5***

					Only 26LU5***
Only 22LU5***						PROGRAMME
POWER INPUT	MENU		OK	VOLUME	PROGRAMME
					P
INPUT MENU		OK			P	VOLUME
						OK
					OK
						MENU
					MENU
						INPUT
					INPUT
						POWER
						Main
					ON	Power
					OFF	Switch
	Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates white when the TV is switched on.

<![if ! IE]>

<![endif]>PREPARATION

7

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

8

BACK PANEL INFORMATION

■ Here shown may be somewhat different from your TV.

Only 32/37/42LH3***

Only 22/26/32/37/42LH2***, 32/37/42LH3***

Only 22/26/32/37/42LH2***
<![if ! IE]> <![endif]>ONLY
<![if ! IE]> <![endif]>USB SERVICE	10
1

	<![if ! IE]> <![endif]>ONLY	10
	<![if ! IE]> <![endif]>USB SERVICE
	<![if ! IE]> <![endif]>IN 3	2

7

Only 22/26/32/37/42LH2***

AV IN2

Only 32/37/42LH3***

2

3

4

5

6

7

2

3

4

5

6

7

RGB IN (PC)

RS-232C IN

RGB IN (PC)

RS-232C IN

(CONTROL&SERVICE)

(CONTROL&SERVICE)

AUDIO IN OPTICALDIGITAL

AUDIO IN OPTICALDIGITAL

(RGB/DVI)

VIDEO L/MONO AUDIO

R

(RGB/DVI)

VIDEO L/MONO

AUDIO

R

<![if ! IE]> <![endif]>AV

/DVI IN

<![if ! IE]> <![endif]>AV

/DVI IN

AUDIO OUT

<![if ! IE]> <![endif]>IN

AUDIO OUT

<![if ! IE]> <![endif]>IN1

2

2

1

ANTENNA

1

ANTENNA

(DVI)

VIDEO

AUDIO

IN

(DVI)

IN

VIDEO

AUDIO

COMPONENT IN

COMPONENT IN

8

9

8

9

1

Power Cord Socket

6 RS-232C IN (CONTROL & SERVICE) PORT

This TV operates on an AC power. The voltage is

Connect to the RS-232C port on a PC.

indicated on the Specifications page. Never

This port is used for Service or Hotel mode.

attempt to operate the TV on DC power.

2

HDMI/DVI IN Input

7

Audio/Video Input

Connect audio/video output from an external

Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)

device to these jacks.

signal to HDMI/DVI port with DVI to HDMI cable.

3

RGB/DVI Audio Input

8

Component Input

Connect a component video/audio device to

Connect the audio from a PC or DTV.

these jacks.

4

RGB Input

9

Antenna Input

Connect the output from a PC.

Connect RF antenna to this jack.

5

OPTICAL DIGITAL AUDIO OUT

10

SERVICE ONLY PORT

Connect digital audio to various types of equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

■ Here shown may be somewhat different from your TV.

Only 32/37/42/47/55LH5***, 42/47LH9***

1

2

1

3	4								7
		5		6

<![if ! IE]>

<![endif]>IN 4

10

2

	RGB IN (PC)	RS-232C IN
		(CONTROL&SERVICE)

/DVI IN	OPTICALDIGITAL
AUDIO IN
3	VIDEO	L/MONO AUDIO	R	<![if ! IE]> <![endif]>AV	7
(RGB/DVI) AUDIO OUT				<![if ! IE]> <![endif]>IN1
2
2
1(DVI)

1		AV IN2
VIDEO	AUDIO	ANTENNA IN
COMPONENT IN
8		9

1	Power Cord Socket	6	RS-232C IN (CONTROL & SERVICE) PORT
	This TV operates on an AC power. The voltage is		Connect to the RS-232C port on a PC.
	indicated on the Specifications page. Never		This port is used for Service or Hotel mode.
	attempt to operate the TV on DC power.
2	HDMI/DVI IN Input	7	Audio/Video Input
			Connect audio/video output from an external
	Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
			device to these jacks.
	signal to HDMI/DVI port with DVI to HDMI cable.
3	RGB/DVI Audio Input	8	Component Input
			Connect a component video/audio device to
	Connect the audio from a PC or DTV.
			these jacks.
4	RGB IN Input	9	Antenna Input
	Connect the output from a PC.		Connect RF antenna to this jack.
5	OPTICAL DIGITAL AUDIO OUT	10	USB IN Input
	Connect digital audio to various types of equipment.		Connect USB storage device to this jack.

Connect to a Digital Audio Component.

Use an Optical audio cable.

<![if ! IE]>

<![endif]>PREPARATION

9

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

■ Here shown may be somewhat different from your TV.

Only 22/26LU5***

ON

1

OFF

	2	3	4	5	6	7	8
			RGB IN (PC)		RS-232C IN
					(CONTROL&SERVICE)
		AUDIO IN OPTICAL					USB IN
	2	(RGB/DVI) DIGITAL			VIDEO L(MONO) AUDIO	SERVICE ONLY
						R
			AUDIO OUT			<![if ! IE]> <![endif]>IN AV
	1(DVI)
	/DVI IN
				VIDEO	AUDIO	ANTENNA
				COMPONENT IN		IN
			9			10
1	Power Cord Socket
	This TV operates on an AC power. The voltage is
	indicated on the Specifications page. Never
	attempt to operate the TV on DC power.
2	HDMI Input
	Connect an HDMI signal to HDMI IN.

Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.

3RGB/DVI Audio Input

Connect the audio from a PC or DTV.

4RGB IN Input

Connect the output from a PC.

5OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

Only 26LU5***

<![if ! IE]> <![endif]>3	2
<![if ! IE]> <![endif]>IN

7

					AV IN2
	Only 26LU5***
2	3	4	5		6	7	8
		RGB IN (PC)			RS-232C IN
				(CONTROL&SERVICE)
	AUDIO IN		OPTICAL				USB IN
	(RGB/DVI)		DIGITAL			SERVICE ONLY
2				VIDEO	L(MONO) AUDIO R	<![if ! IE]> <![endif]>AV
1(DVI)		AUDIO OUT				<![if ! IE]> <![endif]>IN1
	/DVI IN
			VIDEO		AUDIO	ANTENNA
			COMPONENT IN			IN
		9				10

6RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

7Audio/Video Input

Connect audio/video output from an external device to these jacks.

8SERVICE ONLY PORT

9Component Input

Connect a component video/audio device to these jacks.

10Antenna Input

Connect RF antenna to this jack.

10

STAND INSTALLATION

■ Image shown may differ from your TV

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Only 22LH2***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Only 26/32/37/42LH2***,

32/37/42LH3***, 32/37/42/47LH5***, 42/47LH9***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2 Assemble the TV as shown.

2 Assemble the TV as shown.

Cover Base

Only 22/26LU5***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

3Fix the 4 bolts securely using the holes in the back of the TV.

2Fix the 2 or 3 bolts securely using the holes as shown.

(Only 26LU5***)

<![if ! IE]>

<![endif]>PREPARATION

11

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

NOT USING THE DESK-TYPE STAND

■ Here shown may be somewhat different from your TV.

When installing the wall-mounted unit, use the protection cover.

Only 22LH2***		Only 26/32/37/42LH2***,
1	Carefully place the TV screen side down on a cush-	32/37/42LH3***, 32/37/42/47/55LH5***
	ioned surface to protect the screen from damage.	Insert the PROTECTION COVER into the TV
		until clicking sound.

2 Loose the bolts from TV.

Only 42/47LH9***

After removing the protection paper from the protection cover, adhere it to the TV as shown.

3 Detach the Stand Body from T V.

4 Insert the Protection Cover into the TV.

Protection Cover

5Fix the 4 bolts securely using the holes in the back of the TV.

12

ATTACHING THE TV TO A

DESK (Only 26/32/37/42LH2***,

32/37/42LH3***, 26LU5***, 32/37/42LH5***, 42LH9***)

■ Here shown may differ from your TV.

The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

1-Screw

(provided as parts of the product)

Stand

DETACHING STAND

■ Here shown may be somewhat different from your TV.

Only 22/26LU5***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2LooseTV. the bolts and then detach the stand from

(Only 26LU5***)

3 Loose the bolts and then detach the Cover Base from T V.

Desk

! WARNING

G To prevent TV from falling over, the TV should be securely attached to the floor/wall per

	installation instructions. Tipping, shaking, or	Cover Base
	rocking the machine may cause injury.
		(Only 26LU5***)
		4 Detach the Stand Body from T V.
		Stand Body

<![if ! IE]>

<![endif]>PREPARATION

13

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

■ Here shown may be somewhat different from your TV.

Only 22LH2***

1Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Only 26/32/37/42LH2***, 32/37/42LH3***, 32/37/42/47/55LH5***,

42/47LH9***

1Connect the cables as necessary.

To connect additional equipment, see the

External Equipment Setup section of the manual.

2	Install the CABLE MANAGEMENT CLIP as shown.

2Open the CABLE MANAGEMENT CLIP as shown and manage the cables.

	CABLE MANAGEMENT CLIP
	3 Fit the CABLE MANAGEMENT CLIP as shown.	CABLE MANAGEMENT CLIP
		3 Fit the CABLE MANAGEMENT CLIP as
		shown.

How to remove the CABLE MANAGE-

MENT CLIP(Only 22LH2***)

G Hold the CABLE MANAGE-

MENT CLIP with both hands

! NOTE

and pull it backward.

G Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

14

Only 22/26LU5***

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

CAREFUL INSTALLATION ADVICE

A You should purchase necessary components to fix the TV safety and secure to the wall on the market.

A Position the TV close to the wall to avoid the possibility of it falling when pushed.

A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

POSITIONING YOUR DISPLAY

(Only 22LH2***)

■Here shown may be somewhat different from your TV.

■Adjust the position of the panel in various ways for maximum comfort.

•Tilt range

12

0

0

3

! NOTE

GThe following model is a fixed stand type model without the Tilt and Swivel features so excessive pressure may damage the set.

- 22/26LU5***

SWIVEL STAND

(Except for 22/26LU5***, 22LH2***)

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

1		1
	2	2

1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3

3Use a sturdy rope to tie the product for alignmen. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

GWhen moving the TV undo the cords first.

GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

<![if ! IE]>

<![endif]>PREPARATION

15

PREPARATION

<![if ! IE]>

<![endif]>PREPARATION

DESKTOPPEDESTALINSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

4 inches

4 inches

4 inches	4 inches

A The TV can be installed in various ways such as on a wall, or on a desktop etc.

A The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker

WALL MOUNT: HORIZONTAL INSTALLATION

A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.

A We recommend that you purchase a wall mounting bracket which supports VESA standard.

A LG recommends that wall mounting be performed by a qualified professional installer

4 inches

4 inches

4 inches

4 inches

4 inches

! NOTE

GShould Install wall mount on a solid wall perpendicular to the floor

GShould use a special wall mount, if you want to install it to ceiling or slanted wall.

GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.

GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.

GLG is not liable for any accidents or damage to property or TV due to incorrect installation:

-Where a non-compliant VESA wall mount is used.

-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.

-Not following the recommended Installation method.

A

B

Model	VESA		Standard	Quantity
	(A * B)		Screw
22LU5***	100	* 100	M4	4
26LU5***	200 * 100		M4	4
22LH2***	100	* 100	M4	4
26LH2***	200 * 100		M4	4
32LH2***	200 * 100		M4	4
37LH2***	200	* 200	M6	4
42LH2***	200	* 200	M6	4
32LH3***	200 * 100		M4	4
37LH3***	200	* 200	M6	4
42LH3***	200	* 200	M6	4
32LH5***	200 * 100		M4	4
37LH5***	200	* 200	M6	4
42LH5***	200	* 200	M6	4
47LH5***	200	* 200	M6	4
55LH5***	400	* 400	M6	4
42LH9***	200	* 200	M6	4
47LH9***	200	* 200	M6	4

16

■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

■ For optimum picture quality, adjust antenna direction.

■ An antenna cable and converter are not supplied.

ON	<![if ! IE]> <![endif]>PREPARATION
OFF

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Antenna

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

ANTENNA IN

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

UHF

Signal

Amplifier

ANTENNA IN

VHF

■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.

■If signal needs to be split for two TVs, use an antenna signal splitter for connection.

17

EXTERNAL EQUIPMENT SETUP

■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47/55LH5*** models.

■Here shown may differ from your TV.

HD RECEIVER SETUP

■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Connecting with a component cable

1

Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.

3Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

4Select Component1 input source using the INPUT button on the remote control.

If connected to COMPONENT IN 2, select Component2 input source.

G HDMI Audio Supported format : Dolby Digital, PCM

2
1
VIDEO	AUDIO
COMPONENT IN

12

	Signal	Component	HDMI
			X
	480i/576i	O
	480p/576p	O	O
	720p/1080i	O	O
	1080p	O	O
		(50Hz/60Hz)	(24Hz/30Hz/50Hz/60Hz)

18

Connecting a set-top box with an HDMI cable

1Connect the digital set-top box to HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 (Except for 22/26/32/37/42LH2***, 22LU5***) or HDMI IN 4 (Only 32/37/42/47/55LH5***, 42/47LH9***) jack on the TV.

2Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

3Select HDMI1, HDMI2, HDMI3(Except for 22/26/32/37/42LH2***, 22LU5***) or HDMI4(Only

32/37/42/47/55LH5***, 42/47LH9***) input source using the INPUT button on the remote control.

! NOTE

G Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

		AUDIO IN		OPTICA
		/DVI IN
	3	(RGB/DVI)		AUDI
	2	2
	1(DVI)
		Y	PB	PR
		1
			VIDEO

COMPON

1

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

19

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

Connecting with an HDMI to DVI cable

1Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.

2Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4Select HDMI1 input source using the INPUT button on the remote control.

AUDIO IN	OPTICAL DI

/DVI IN	(RGB/DVI)	AUDIO OU
3
2	2
1(DVI)	PB	PR
	1
	VIDEO
	COMPONE
1	2

20

DVD SETUP

Connecting with a component cable

1Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.

2Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV.

3Turn on the DVD player, insert a DVD.

4Select Component1 input source using the INPUT button on the remote control.

If connected to COMPONENT IN 2, select Component2 input source.

5Refer to the DVD player's manual for operating instructions.

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV	Y	PB	PR
	Y	PB	PR
Video output ports	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	Pb	Pr

2
1
VIDEO	AUDIO
COMPONENT IN

12

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

21

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

	Connecting the HDMI cable
				AUDIO IN		OPTICAL D
	1	Connect the HDMI output of the DVD to the		/DVI IN		AUDIO O
		HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 (Except	3	(RGB/DVI)
		for 22/26/32/37/42LH2***, 22LU5***) or HDMI IN 4	2	2
		(Only 32/37/42/47/55LH5***, 42/47LH9***) jack on the
			1(DVI)	Y	PB	PR
		TV.
				1
	2	Select HDMI1, HDMI2, HDMI3(Except for			VIDEO
					COMPONE
		22/26/32/37/42LH2***, 22LU5***) or HDMI4(Only
		32/37/42/47/55LH5***, 42/47LH9***) input source
		using the INPUT button on the remote control.

3	Refer to the DVD player's manual for operating instructions.

1

! NOTE

G The TV can receive video and audio signals simultaneously when using an HDMI cable.

G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

G The TV set can process audio format of PCM or Dolby Digital, when connect the external equipment using an HDMI cable.

G Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

22

VCR SETUP

■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.

Connecting with a RF Cable
PR	L	R	ANT OUT S-VIDEO VIDEO L	R
			1
EO		AUDIO
MPONENT IN		ANTENNA IN
			OUTPUT
			SWITCH

Wall Jack

2

Antenna

1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

2 Connect the antenna cable to the ANT IN socket of the VCR.

3Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

23

EXTERNAL EQUIPMENT SETUP

Connecting with a RCA cable

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)

2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3Select AV1 input source using the INPUT button on the remote control.

If connected to AV2 input, select AV2 input source.

!NOTE

G If you have a mono VCR, connect the audio cable from the

VCR to the AUDIO L/MONO jack of the TV.

AUDIO IN OPTICAL DIGITAL

		VIDEO L/MONO AUDIO R
(RGB/DVI)	AUDIO OUT	<![if ! IE]> <![endif]>IN1AV

2

Y	PB PR	L	or	1
1
	VIDEO	AUDIO	ANTENNA IN

COMPONENT IN 1

AV IN 2

S-VIDEO VIDEO	L	R	S-VIDEO VIDEO	L	R	ANT IN
			ANT IN
			OUTPUT			ANT OUT
			SWITCH
OUTPUT			ANT OUT
SWITCH

24

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

1	Connect one end of an optical cable to the TV Digital	AUDIO IN OPTICALDIGITAL				<![if ! IE]> <![endif]>AV
	Audio (Optical) Output port.
		(RGB/DVI) AUDIO OUT		VIDEO	/MONO AUDIO	<![if ! IE]> <![endif]>1 IN
3	Set the “TV Speaker option - Off ” in the AUDIO						<![if ! IE]> <![endif]>EXTERNAL
2	Connect the other end of the optical cable to the digi-	2
	tal audio (Optical) input on the audio equipment.
		Y	R	L	R
		1	1		AUDIO	ANTE
	menu.(Gp.108) Refer to the external audio equipment		VIDEO				<![if ! IE]> <![endif]>EQUIPMENT
			COMPONENT IN
	instruction manual for operation.
			2				<![if ! IE]> <![endif]>SETUP
GDo not look into the optical output port. Looking at the
CAUTION
laser beam may damage your vision.

! NOTE

G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off.

25

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

OTHER A/V SOURCE SETUP

Camcorder

	RS-232C IN
	(CONTROL & SERVICE)
AUDIO IN OPTICALDIGITAL
	VIDEO	L/MONO	AUDIO	R
(RGB/DVI)	AUDIO OUT			<![if ! IE]> <![endif]>IN1AV
2
Y	PB
1
	VIDEO			ANTENNA IN
	COMPONENT IN

Video Game Set

VIDEO L R

1

or

Camcorder

Video Game Set

VIDEO L R

<![if ! IE]>

<![endif]>IN 4

1

AV IN2

1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours . (Video = yellow, Audio Left = white, and Audio Right = red)

2Select AV1 input source with using the INPUT button on the remote control. If connected to AV2 input, select AV2 input source.

3Operate the corresponding external equipment. Refer to external equipment operating guide.

26

USB SETUP

(Except for 22/26/32/37/42LH2***, 32/37/42LH3***, 22/26LU5***)

1

<![if ! IE]>

<![endif]>IN 4

1Connect the USB device to the USB IN jacks on the TV.

2After connecting the USB IN jacks, you use the USB function. (G p.70)

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

27

EXTERNAL EQUIPMENT SETUP

<![if ! IE]>

<![endif]>SETUP EQUIPMENT EXTERNAL

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connecting with a D-sub 15 pin cable

1Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.

2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

3Turn on the PC and the TV.

4Select RGB input source using the INPUT button on the remote control.

	RGB IN (PC)	RS-232C IN
		(CONTROL & SERVICE)
	AUDIO IN OPTICAL		<![if ! IE]> <![endif]>AV
	DVI IN
		VIDEO /MONO AUDIO	<![if ! IE]> <![endif]>1 IN
	(RGB/DVI)

2
	P	PR	L	R
1
			AUDIO	A
	COMPONENT IN
2		1
AUDIO	RGB OUTPUT

28