LG 49LB620T, 60LB650T, 42LB670T, 47LB670T User manual
OWNER’S MANUAL
*
LED TV
* Disclaimer
LG LED TV applies LCD
screen with LED backlights.
Click! User Guide
Please read this manual carefully before operating
your set and retain it for future reference.
LB63**
LB65**
LB67**
LB69**
LB72**
LB75**
LB87**
www.lg.comwww.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
ENG
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
3 EXTERNAL CONTROL DEVICE
SETUP
4 SAFETY INSTRUCTIONS
10 Viewing 3D Imaging (Only 3D models)
11 INSTALLATION PROCEDURE
11 ASSEMBLING AND PREPARING
11 Unpacking
15 Separate purchase
16 Parts and buttons
18 - Using the Joystick button
19 Lifting and moving the TV
20 Setting up the TV
20 - Attaching the stand
24 - Attaching the Sound Bar Supporter
25 Mounting on a table
27 Mounting on a wall
28 Tidying cables
30 Using Built-in Camera
30 - Preparing Built-in Camera
31 - Name of Parts of Built-in Camera
31 - Checking the Camera’s Shooting
Range
32 MAKING CONNECTIONS
32 Antenna connection
33 Satellite dish connection
33 Headphone connection
34 HDMI connection
35 DVI to HDMI connection
36 Component connection
37 Composite connection
38 Audio connection
38 - Digital optical audio connection
38 USB connection
39 Euro Scart connection
40 MHL connection
41 REMOTE CONTROL
42 MAGIC REMOTE FUNCTIONS
43 Registering Magic Remote
43 How to use Magic Remote
44 Precautions to Take when Using the
Magic Remote
44 USING THE USER GUIDE
45 MAINTENANCE
45 Cleaning your TV
45 - Screen, frame, cabinet and stand
45 - Power cord
45 TROUBLESHOOTING
46 ENVIRONMENTAL INFORMATION
46 WEEE
47 SPECIFICATIONS
WARNING
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
EXTERNAL CONTROL DEVICE SETUP
ENGENGLISH
To obtain the external control device setup information, please visit www.lg.com.
4
SAFETY INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
ENG
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control
in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a
bathroom
- Near any heat source such as stoves and
other devices that produce heat
- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
Do not place the product where it might be
exposed to dust.
This may cause a fire hazard.
Mains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
Make sure to connect Mains cable to
compliant AC mains socket with Grounded
earth pin. (Except for devices which are not
grounded on earth.) Otherwise possibility you
may be electrocuted or injured.
Insert power cable plug completely into wall
socket otherwise if not secured completely
into socket, fire ignition may break out.
Ensure the power cord does not come into
contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.
Do not place a heavy object, or the product
itself, on power cables.
Otherwise, this may result in fire or electric
shock.
Do not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
Bend antenna cable between inside and
outside building to prevent rain from flowing
in.
This may cause water damaged inside the
Product and could give an electric shock.
SAFETY INSTRUCTIONS
Desiccant
5
When mounting TV onto wall make sure to
neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.
Do not plug too many electrical devices into
a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
Do not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
Keep the anti-moisture packing material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
Dispose of used batteries carefully to
ensure that a small child does not consume
them. Please seek Doctor- Medical Attention
immediately if child consumes batteries.
Do not insert any metal objects/conductors
(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not
touch the power cable right after plugging
into the wall input terminal. You may be
electrocuted. (Depending on model)
Do not put or store inflammable substances
near the product. There is a danger of
combustion/explosion or fire due to careless
handling of the inflammable substances.
Do not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must pay
particular attention. Electrical shock, fire
or injury can occur. If a foreign object is
dropped into the product, unplug the power
cord and contact the service centre.
ENGENGLISH
Do not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
Do not spray water on the product or scrub
with an inflammable substance (thinner or
benzene). Fire or electric shock accident
can occur.
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not allow any impact, shock or any
objects to fall into the unit, and do not drop
anything onto the screen.
You may be injured or the product can be
damaged.
Never touch this product or antenna during
a thunder or lighting storm.
You may be electrocuted.
Never touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
If any of the following occur, unplug the
product immediately and contact your local
service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange
smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket
if you do not intend to use the TV for a long
period of time. Accumulated dust can cause
fire hazard and insulation deterioration can
cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
Do not install this product on a wall if it
could be exposed to oil or oil mist.
This may damage the product and causeit
to fall.
CAUTION
Install the product where no radio wave
occurs.
There should be enough distance between
an outside antenna and power lines to
keep the former from touching the latter
even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
SAFETY INSTRUCTIONS
7
If you install the TV on a stand, you need
to take actions to prevent the product from
overturning. Otherwise, the product may fall
over, which may cause injury.
If you intend to mount the product to a wall,
attach VESA standard mounting interface
(optional parts) to the back of the product.
When you install the set to use the wall
mounting bracket (optional parts), fix it
carefully so as not to drop.
Only use the attachments / accessories
specified by the manufacturer.
When installing the antenna, consult with a
qualified service technician. If not installed
by a qualified technician, this may create a
fire hazard or an electric shock hazard.
We recommend that you maintain a
distance of at least 2 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
Do not place non-rechargeable batteries in
charging device.
Make sure there are no objects between the
remote control and its sensor.
Signal from Remote Control can be
interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this
occurs turn off lighting or darken viewing
area.
When connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which
may cause injury or damage the product.
Do not turn the product On/Off by plugging-
in or unplugging the power plug to the
wall outlet. (Do not use the power plug for
switch.)
It may cause mechanical failure or could
give an electric shock.
ENGENGLISH
Only use the specified type of battery.
This could cause damage to the remote
control.
Do not mix new batteries with old batteries.
This may cause the batteries to overheat
and leak.
Batteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
Please follow the installation instructions
below to prevent the product from
overheating.
- The distance between the product and the
wall should be more than 10 cm.
- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
cupboard).
- Do not install the product on a carpet or
cushion.
- Make sure the air vent is not blocked by a
tablecloth or curtain.
Otherwise, this may result in fire.
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Take care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and have
the cord replaced with an exact replacement
part by an authorized servicer.
Prevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
When cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
When unplugging the cable, grab the plug
and unplug it, by pulling at the plug. Don’t
pull at the cord to unplug the power cord
from the power board, as this could be
hazardous.
Do not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.
Avoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.
When moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
When moving or unpacking the product,
work in pairs because the product is heavy.
Otherwise, this may result in injury.
SAFETY INSTRUCTIONS
9
Contact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there
may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
product.
You may find different brightness and colour
of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
Displaying a still image (e.g., broadcasting
channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting in
retention of the image, which is known as
image sticking. The warranty does not cover
the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period (2
or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for
a long time, image sticking may occur on
the borders of the panel.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
ENGENGLISH
The panel is a high technology display
product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does
not affect the performance and reliability of
the product.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
Generated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.
10
SAFETY INSTRUCTIONS
Viewing 3D Imaging
ENGLISH
ENG
(Only 3D models)
WARNING
Viewing Environment
Viewing Time
- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may
cause headache, dizziness, fatigue or
eye strain.
Those that have a photosensitive
seizure or chronic illness
Some users may experience a seizure or
other abnormal symptoms when they are
exposed to a ashing light or particular
pattern from 3D contents.
Do not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
3D Contents are not recommended to those
who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
If you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
If your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
Do not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
When these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- Consult your doctor when the symptoms
persist. Symptoms may include
headache, eyeball pain, dizziness,
nausea, palpitation, blurriness,
discomfort, double image, visual
inconvenience or fatigue.
CAUTION
Viewing Environment
Viewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the
TV.
Viewing Age
Infants/Children
- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
- Children under the age of 10 may
overreact and become overly excited
because their vision is in development (for
example: trying to touch the screen or
trying to jump into it. Special monitoring
and extra attention is required for children
watching 3D contents.
- Children have greater binocular disparity
of 3D presentations than adults because
the distance between the eyes is shorter
than one of adults. Therefore they will
perceive more stereoscopic depth
compared to adults for the same 3D
image.
Teenagers
- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them to
refrain from watching 3D contens for a
long time when they are tired.
Elderly
- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise,
you may not be able to view 3D videos
properly.
Do not use 3D glasses instead of your normal
glasses, sunglasses or protective goggles.
Using modied 3D glasses may cause eye
strain or image distortion.
Do not keep your 3D glasses in extremely high
or low temperatures. It will cause deformation.
The 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
<
<
11
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you
are using.
New features may be added to this TV in the future.
The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV
may take up to one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
ENGENGLISH
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
Some models have a thin film attached on to the screen and this must not be removed.
NOTE
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
*A
*B
A
B
B
10 mm
=
18 mm
A
=
12
ENGLISH
ENG
ENERGY
ASSEMBLING AND PREPARING
AV MODE
INPUT
TV
SAVING
123
456
7809
FLASHBK
LIST
MARK
FAV
P
A
G
3D
CHVOL
E
MUTE
INFO
MENU
Q.MENU
ENTER
EXIT
BACK
L/R SELECT
FREEZE
RATIO
Remote Control, Batteries
(AAA)
The remote control will not
be included for all sales
market.
(Depending on model)
Magic Remote, Batteries
(AA)
(Only LB63**, LB65**, LB67**,
LB69**, LB72**, LB75**,
LB87**)
(See p.42)
(See p.41)
Tag On
Tag on Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
(Only LB65**, LB67**, LB69**,
LB72**, LB75**, LB87**)
Owner’s Manual
Wall Mount Spacers
2EA
(Only 42LB63**, 42LB65**)
(See p.28)
Component Gender Cable
(Only LB87**)
(See p.36)
Composite Gender Cable
(Only LB87**)
(See p.36, 37)
Power Cord
ASSEMBLING AND PREPARING
13
ENGENGLISH
Cable Holder
(See p.28, 29)
Stand Screws
4EA, M4 x L20
(Only 32LB65**)
(See p.20, 21)
Cable Managements
2EA
(Only LB63**, LB65**,
LB67**, LB69**, LB72**)
(See p.28, 29)
Stand Screws
4EA, M4 x L14
(Only LB63**,
39/42/47/50/55/60/70LB65**,
LB67**, LB69**, LB72**,
LB75**)
8EA, M4 x L14
(Only LB87**)
(See p.20, 21, 22, 23, 24)
Cable Managements
2EA
(Only LB75**)
(See p.29)
Stand Screws
4EA, M4 x L10
(Only LB75**)
(See p.21)
Stand Bases
(Only LB65**-TH)
(See p.21)
Stand Bases
(Only LB63**,
32/39/42/47/50/55/60LB65**
-TA/TB)
(See p.20)
Stand Assys
(Stand Body/Stand Base)
(Only 70LB65**-TA, LB67**,
LB69**, LB72**)
(See p.20)
14
ENGLISH
ENG
ASSEMBLING AND PREPARING
Stand Front
(Only LB75**)
(See p.21)
Stand Assys
(Only LB87**)
(See p.22)
Stand Supporters
(Only LB75**)
(See p.21)
Sound Bar Supporters
(Only LB87**)
(See p.24)
Sound Bar
(Only LB87**)
(See p.22, 24)
Screw Covers
(Only LB87**)
(See p.23, 24)
ASSEMBLING AND PREPARING
15
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
AG-F***DP
Dual Play Glasses
Tag on AN-VC5**
Compatibility
AG-F***DP
Dual Play Glasses
AG-F***
Cinema 3D Glasses
AN-MR500
Magic Remote
Tag on
AN-VC5**
Video Call Camera
LG Audio Device
AG-F***
Cinema 3D Glasses
Video Call Camera
LB65**, LB67**,
LB63**
• • •
• • •
• •
• • •
LB69**, LB72**,
LB75**
AN-MR500
Magic Remote
LG Audio Device
• •
• •
LB87**
ENGENGLISH
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
16
ASSEMBLING AND PREPARING
Parts and buttons
ENGLISH
ENG
A type : LB63**, LB65**-TA/TB
Screen
B type : LB65**-TH
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button
2
C type : LB67**, LB69**, LB72**
Remote control and
Screen
Speakers
Intelligent1 sensors
Power Indicator
Speakers
Joystick Button
2
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button
2
D type : LB75**
Screen
Speakers
ASSEMBLING AND PREPARING
E type : LB87**
Screen
Speakers
17
ENGENGLISH
Built-in Camera
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button
2
Remote control and
Intelligent1 sensors
Joystick Button
2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
You can set the LG Logo light or Power indicator Light to on or off by selecting OPTION in the
main menus. (Depending on model)
LG Logo light
Loading...