LG 37LH50YR, 42LH70YR, 37LH70YR, 42LH50YR, 32LH70YR User Manual

ENGLISH

LCD TV

OWNER’S MANUAL

LCD TV MODELS

19LH2*** 37LH5*** 22LH2*** 42LH5*** 26LH2*** 47LH5*** 32LH2*** 55LH5*** 37LH2*** 32LH6*** 42LH2*** 42LH6*** 32LF2*** 32LH7*** 42LF2*** 37LH7*** 32LH3*** 42LH7*** 37LH3*** 47LH7*** 42LH3*** 42LH9*** 47LH3*** 47LH9***

19LU5***

22LU5***

26LU5***

Please read this manual carefully before operating your TV.

Retain it for future reference.

Record the model number and serial number of the TV.

Refer to the label on the back cover and quote this information.

To your dealer when requiring any service.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

(Only 26/32/37/42LH2***, 32/42LF2***, 26LU5***, 32/37/42LH3***, 37/42LH5***, 32/37LH7***, 42LH9***)

1-screw for stand fixing (Refer to p.15)

Wall Mounting Bracket(Separate purchase)

RW120

(19/22LH2***,

19/22LU5***)

RW230

 

 

 

AW-47LG30M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(26/32LH2***, 32LF2***

(32/37/42LH2***, 32/42LF2***,

26LU5***, 32LH3***,

32/37/42/47LH3***,

32LH7***)

37/42/47LH5***,

 

32/37/42/47LH7***, 42/47LH9***)

AW-55LH40M

(55LH5***)

Use screws 12mm(+0.5/-0.5) long on the SET assembly side.(Separate purchase) (Only 42/47LH7***)

 

Set assembly side

 

Set assembly side

 

(with guide spacer)

(without guide spacer)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12mm

12mm

Guide spacer

ACCESSORIES

Ensure that the following accessories are included with your TV.

If an accessory is missing, please contact the dealer where you purchased the TV.

Here shown may be somewhat different from your TV.

This item is not included for all models.

 

RATIO

Batteries

ENERGY SAVING

TV

 

SLEEP

 

POWER ON/OFF

 

AV MODE

Owner’s Manual

 

POWER

 

RATIO

 

 

MARK

 

FAV

LIST

 

Q.VIEW

or

 

MUTE

or

MENU

 

RETURN

 

 

 

MARK

 

 

 

FAV

 

 

Q.MENU

 

 

Power Cord

Remote Control

Only 32/37/42/47LH7***

Polishing Cloth

Polishing cloth for use on the screen.

*Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Do not use excessive force. This may cause scratching or discolouration.

(Only 37/42/47LH7***)

Cable management clip

Protection cover

Stand rear cover

(Refer to p.17)

(Refer to p.14)

 

(Refer to p.15)

(32LH7*** only)

(37LH7*** only)

(42LH7*** only)

 

(47LH7*** only)

x 7

 

x 8

x 3

 

x 4

x 8

M4x20

M4x20

 

M4x20

M4x16

 

M4x16

 

bolts for stand assembly (Refer to p. 13)

 

Only 19/22/26LU5***

Protective Bracket and Bolt for Power Cord (Refer to P 18)

USB extension cable

Make sure to use the provided USB extension cable, Which is specially designed for a slim fit.

Only 19/22LH2***

 

x 2

x 3

 

 

 

 

(Only 19/22LU5***) (Only 26LU5***,)

 

 

Protection cover

Cable Holder

Bolts for stand assembly

Cable management clip

 

(Refer to p.16)

(Refer to p.14)

(Refer to p.16)

(Refer to p.12)

 

 

 

 

 

 

 

 

Only 26/32/37/42LH2***, 32/37/42/47LH3***,

 

Only 32/42LF2***

 

37/42/47/55LH5***, 42/47LH9***

 

 

 

 

(Except 55LH5***)

 

 

 

 

 

 

or

 

x 4

x 4

or

 

 

 

x 4

 

 

 

 

 

 

 

 

 

Bolts for stand assembly

Protection cover

 

Bolts for stand assembly

Protection Cover

(Refer to p.13)

(Refer to p.14)

 

(Refer to p.12)

(Refer to p.14)

ACCESSORIES

1

CONTENTS

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

 

PREPARATION

 

CONTENTS

Not Using the desk-type stand.................................

14

 

Front Panel Controls.....................................................

4

 

Back Panel Information ................................................

8

 

Stand Installation.........................................................

12

 

Attaching the TV to a desk.........................................

15

 

Swivel Stand .................................................................

15

 

To Use The Stand Rear Cover...................................

15

 

Positioning your display ............................................

15

 

Back Cover for Wire Arrangement ..........................

16

 

Detaching Stand ..........................................................

17

 

Careful Installation Advice.........................................

18

 

How to Secure the Power Cable..............................

18

 

Desktop Pedestal Installation ...................................

18

 

Wall Mount: Horizontal Installation........................

19

 

Kensington Security System......................................

20

 

Antenna Connection ..................................................

21

 

EXTERNAL EQUIPMENT SETUP

 

 

HD Receiver Setup......................................................

22

 

DVD Setup......................................................................

24

 

VCR Setup.....................................................................

26

 

Other A/V Source Setup ..........................................

28

 

External Stereo Setup ................................................

29

 

AV Output Setup ........................................................

29

 

Usb in Setup..................................................................

30

 

PC Setup........................................................................

30

 

- Screen Setup for PC Mode ..............................

32

 

WATCHING TV / PROGRAMME CONTROL

 

Remote Control Key Functions ...............................

36

 

Turning on the TV.......................................................

42

 

Programme Selection ................................................

42

 

Volume Adjustment ...................................................

42

 

Quick Menu .................................................................

43

 

On-Screen Menus Selection and Adjustment.....

44

 

Auto Programme Tuning............................................

45

Manual Programme Tuning .......................................

46

Programme Edit ...........................................................

48

Selecting the Programme List..................................

50

Favourite Programme Setup......................................

51

Input List........................................................................

52

Input Label ....................................................................

53

.................................................................

54

Key Lock.........................................................................

57

Initializing(Reset to original factory settings) .....

58

AV Mode........................................................................

59

TO USE THE BLUETOOTH

 

Precautions when using the Bluetooth.................

60

Setting the Bluetooth.................................................

61

Set TV PIN......................................................................

62

Bluetooth headset

 

- Connecting a new Bluetooth headset .............

63

- Connecting to Bluetooth headset already

 

registered...................................................................

63

- Disconnecting the Bluetooth headset during use....

64

- When requesting to connect to TV from the

 

Bluetooth headset....................................................

64

Managing Registered Bluetooth device ................

65

My Bluetooth Information. ........................................

66

Receiving photos from external Bluetooth device.........

67

Listening to the musics from external Bluetooth device67

TO USE A USB DEVICE

 

When connecting the USB device..........................

68

Photo List ......................................................................

69

Music List........................................................................

73

Movie List........................................................................

76

Divx Registration Code...............................................

79

Deactivation...................................................................

80

2

PICTURE CONTROL

 

Picture Size (Aspect Ratio) Control.......................

81

Energy Saving....................................................

83

Preset Picture Settings

 

- Picture Mode-Preset............................................

84

Manual Picture Adjustment

 

- Picture Mode-User option.................................

85

Picture Improvement Technology...........................

86

Expert Picture Control...............................................

87

Picture Reset ................................................................

90

LED Local Dimming.....................................................

90

Power Indicator..............................................................

91

Demo Mode..................................................................

92

Mode Setting................................................................

93

SOUND & LANGUAGE CONTROL

 

Auto Volume Leveler...................................................

94

Preset Sound Settings - Sound Mode...................

95

Sound Setting Adjustment - User Mode..............

96

SRS TruSurround XT..................................................

96

Clear Voice ll.................................................................

97

Balance...........................................................................

98

TV Speakers On/ Off Setup ....................................

99

Selecting Audio Out ................................................

100

Audio Reset..................................................................

101

I/II

 

- Stereo/Dual Reception.....................................

102

- NICAM Reception...........................................................

103

- Speaker Sound Output Selection..................

103

On-Screen Menu Language Selection ......................

104

TIME SETTING

 

Clock Setup ................................................................

105

Auto On/ Off Timer Setting...................................

106

Sleep Timer Setting ..................................................

106

TELETEXT

 

Switch on/off .............................................................

107

SIMPLE Text ................................................................

107

TOP Text......................................................................

107

FASTEXT......................................................................

108

Special Teletext Functions ......................................

108

APPENDIX

 

Troubleshooting ........................................................

109

Maintenance ...............................................................

111

Product Specifications..............................................

112

IR Codes.......................................................................

115

External Control Device Setup...............................

117

CONTENTS

3

PREPARATION

PREPARATION

FRONT PANEL CONTROLS

Here shown may be somewhat different from your TV.

CAUTION

G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.)

Only 19/22/26/32/37/42LH2***, 32/37/42/47LH3***

Only 19/22/26LH2***

 

 

 

 

 

 

MENU

 

 

 

 

INPUT

OK

VOLUME

PROGRAMME

 

 

 

POWER

 

 

 

 

 

INPUT

MENU OK

 

P

 

 

 

 

 

Only 32/37/42LH2***,

 

 

 

32/37/42/47LH3***

 

 

 

P

 

PROGRAMME

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

 

OK

 

OK

 

 

 

MENU

 

MENU

Remote Control Sensor

 

 

 

 

 

Power/Standby Indicator

 

 

 

 

 

Illuminates red in standby mode.

 

ON

OFF

 

Illuminates blue when the TV is switched on.

 

 

 

 

 

 

 

 

 

 

 

 

Main Power Switch

 

 

 

 

Except 19/22LH2***

 

4

Here shown may be somewhat different from your TV.

Only 19/22/26LU5***

Only 26LU5***

Only 19/22LU5***

 

 

 

 

 

 

PROGRAMME

 

POWER INPUT

MENU

OK

VOLUME

PROGRAMME

 

 

 

 

 

 

 

P

 

 

INPUT

MENU

OK

 

 

P

MENU

PREPARATION

 

 

 

 

 

 

 

VOLUME

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

POWER

 

 

 

 

 

 

 

 

Main

 

 

 

 

 

 

 

ON

Power

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

Switch

 

 

 

Remote Control Sensor

 

 

 

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates white when the TV is switched on.

Only 32/42LF2***

Power/Standby Indicator

illuminates red in standby mode.

illuminates blue when the TV is switched on.

Remote Control Sensor

POWER Button

P

PROGRAMME

+

VOLUME

-

OK

OK

MENU

MENU

INPUT

INPUT

5

PREPARATION

PREPARATION

FRONT PANEL CONTROLS

Here shown may be somewhat different from your TV.

Only 37/42/47/55LH5***, 32/42LH6***

Remote Control Sensor Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is switched on.

PROGRAMME

P

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

POWER

OFF ON

Main Power Switch

6

Here shown may be somewhat different from your TV.

Only 32/37/42/47LH7***

Intelligent Sensor

Adjusts picture according to the surrounding conditions

Moving LED

Remote Control Sensor

POWER(Touch Sensor)

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates Whitish when the TV is switched on. Note: You can adjust Power Indicator in the

OPTION menu.

Main Power Switch

PROGRAMME

P

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

Only 42/47LH9***

SPEAKER

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates white when the TV is switched on.

P PROGRAMME

VOLUME

OK

OK

MENU

MENU

INPUT

INPUT

POWER

Main Power Switch

PREPARATION

7

PREPARATION

BACK PANEL INFORMATION

Here shown may be somewhat different from your TV.

Only 19/22/26/32/37/42LH2***, 32/42LF2***, 32/37/42/47LH3***(Refer to p.9)

PREPARATION

Only 32/37/42/47LH3***

3IN

1

Only 32/42LF2***

11

2

IN 2

2

8

8

AV IN2

AV IN2

Only 19/22LH2***

2

3

4

5

6

 

 

232C IN

 

 

 

 

 

 

 

USB

 

 

 

RGB IN (PC)

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

IN

ANTENNA IN

 

 

 

VIDEO L(MONO)

 

 

 

 

R

 

VIDEO

AUDIO

 

 

 

 

COMPONENT IN

 

 

OUT

 

 

 

 

 

 

 

 

 

VARIABLE

OUT

 

 

 

 

AV

 

 

7

 

 

8

9

10

Only 26/32/37/42LH2***

2

 

4

5

 

 

RS-232C IN

USB IN

 

 

SERVICE ONLY

 

 

(CONTROL)

 

 

 

HDMI

2

 

 

 

HDMI

RGB IN (PC)

 

AUDIO IN

 

1

 

(RGB/DVI)

 

/DVI IN

 

 

 

 

 

 

VIDEO

IN1

 

 

 

L(MONO) AUDIO R

 

 

AUDIO

 

 

 

 

COMPONENT IN

 

 

ANTENNA

 

 

 

OUT

 

 

 

IN

 

 

 

VARIABLE AUDIO OUT

 

AV

8

Only 32/37/42/47LH3***

2

4

 

 

RS-232C IN

 

 

(CONTROL)

 

HDMI

AUDIO IN

 

 

(RGB/DVI)

 

 

RGB IN (PC)

 

HDMI

 

 

/DVI IN

 

 

 

VIDEO L/MONO AUDIO R

IN1 AV

 

 

 

AUDIO

 

 

COMPONENT IN

ANTENNA

 

VARIABLE AUDIO OUT

 

IN

 

AV OUT

 

 

8

 

Only 32/42LF2***

2

3

4

5

6

 

 

RS-232C IN

 

SERVICE ONLY

 

 

 

(CONTROL)

 

 

 

 

 

 

 

 

HDMI/DVI IN

RGB IN (PC)

 

 

 

 

1

 

 

AUDIO

 

 

 

 

(RGB/DVI)

 

 

 

 

 

 

 

 

 

 

VIDEO L(MONO)

AUDIO R

 

VIDEO

AUDIO

 

 

 

 

COMPONENT IN

 

 

OUT

ANTENNA

 

 

 

 

 

 

 

 

VARIABLE

 

 

 

 

 

AV

 

7

 

 

8

9

10

8

11

Here shown may be somewhat different from your TV.

Only 19/22/26LU5***, 37/42/47/55LH5***, 42/47LH9***

 

 

 

Only 26LU5***

 

 

 

 

 

IN 3

 

2

 

 

 

 

 

 

 

 

1

 

ON

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

1

 

 

 

 

 

 

 

 

 

 

AV IN2

 

 

 

 

Only 19/22/26LU5***

 

 

 

Only 26LU5***

 

 

2

3

 

 

2

3

4

5

6

 

 

 

 

RS-232C IN

USB IN

 

 

 

IN

 

(CONTROL)

SERVICE ONLY

 

 

 

HDMI/DVI IN

 

 

/DVI IN

(CONTROL)

 

 

 

 

 

 

RGB IN (PC)

 

 

 

 

2

 

 

 

AUDIO IN

 

 

 

RGB IN (PC)

 

 

 

 

 

 

1(DVI)

 

 

 

 

 

 

 

 

 

 

 

1(DVI)

 

 

 

 

 

 

 

 

 

 

VIDEO

VIDEO

AUDIO

R

 

 

 

 

L(MONO)L(MONO)AUDIO

R

IN1AV

 

 

 

 

 

 

AV

2

 

 

 

 

 

 

 

 

VIDEO

AUDIO

 

 

 

 

1

 

COMPONENT IN

 

 

 

 

 

 

 

 

 

VIDEO

AUDIO

 

 

 

VARIABLEVARIABLEAUDIO OAUTDIO OUT

 

 

 

AV OUT

 

 

COMPONENT IN

 

 

 

 

 

 

 

7

 

8

 

9

10

7

 

1

 

 

 

 

 

7

 

2

3IN

8

AV IN2

46

AUDIO IN (RGB/DVI)

VIDEO

L/MONO AUDIO R

IN1 AV

 

 

 

VARIABLE AUDIO OUT

ANTENNA

 

AV OUT

 

8

9

10

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2 HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.

3RS-232C IN PORT

Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

4RGB IN Input

Connect the output from a PC.

5 SERVICE ONLY PORT

6RGB/DVI Audio Input

Connect the audio from a PC.

Connect a component video/audio device to these jacks.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

AV Output

Connect second TV or monitor to the AV OUT socket on the TV.

Variable Audio Output

Connect an external amplifier or add a subwoofer to your surround sound system.

Antenna Input

Connect RF antenna to this jack.

USB IN Input

Connect USB storage device to this jack.

PREPARATION

9

PREPARATION

PREPARATION

BACK PANEL INFORMATION

Here shown may be somewhat different from your TV.

Only 32/42LH6***

 

1

 

 

 

2

 

3

4

 

/DVI IN

 

 

 

 

2

 

 

AUDIO IN

 

 

RGB IN (PC)

 

(RGB/DVI)

 

1(DVI)

 

 

 

 

 

 

 

VIDEO L/MONO AUDIO R

AV

2

 

 

 

 

 

 

IN1

 

 

 

 

1

 

 

 

 

VIDEO

AUDIO

 

VARIABLE AUDIO OUT

ANTENNA

COMPONENT IN

 

 

 

5

 

6

7

8

1

 

 

 

6

IN 3

AV IN2

9

2

6

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2 HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.

3RGB IN Input

Connect the output from a PC.

4RGB/DVI Audio Input

Connect the audio from a PC.

5Component Input

Connect a component video/audio device to these jacks.

Connect audio/video output from an external to these jacks.

AV Output

Connect second TV or monitor to the AV OUT socket on the TV.

Variable Audio Output

Connect an external amplifier or add a subwoofer to your surround sound system.

8Antenna Input

Connect RF antenna to this jack.

9USB IN Input

Connect USB storage device to this jack.

10

Here shown may be somewhat different from your TV.

Only 32/37/42/47LH7***

 

 

 

8

 

 

 

 

 

9

 

/DVI IN

 

 

 

3

2

1(DVI)

 

 

 

 

 

2

1

3

4

 

 

 

 

RGB IN

 

 

 

 

232C IN

 

RGB IN (PC)

AUDIO

 

 

 

 

AV

 

 

(CONTROL)

 

 

(RGB/DVI)

L/

AUDIO R

INCOMPONENT

 

 

IN2

 

 

IN1AVOUTAV

VIDEO

 

AUDIO

 

 

 

2

 

 

 

 

 

 

1

 

 

 

 

ANTENNA IN

 

 

 

 

 

 

5

7

6

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

RGB IN Input

Connect the output from a PC.

RGB/DVI Audio Input

Connect the audio from a PC.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

RS-232C IN PORT

Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.

5 Input

Connect a component video/audio device to these jacks.

Connect second TV or monit to the AV OUT socket on the TV.

Variable Audio Output

Connect an external amplifier or add a subwoofer to your surround sound

7Antenna Input

Connect RF antenna to this jack.

8USB IN Input

Connect USB storage device to this jack.

9HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.

PREPARATION

11

PREPARATION

PREPARATION

STAND INSTALLATION

Here shown may be somewhat different from your TV.

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Only 19/22LH2***

Only 32/42LF2***

1

Carefully place the TV screen side down on a cush-

1 Carefully place the TV screen side down on a

ioned surface to protect the screen from damage.

cushioned surface to protect the screen from

 

 

damage.

 

2 Assemble the parts of the Stand Body with

2

the Stand Base of the TV.

Assemble the TV as shown.

Stand Body

Stand Base

Cover Base

3 Assemble the TV as shown

19/22/26LU5***

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

 

4

Fix the 4 bolts securely

holes in the

Fix the 2 or 3 bolts securely using the holes as

back of the TV.

 

shown.

 

 

 

12

Only 26/32/37/42LH2***, 32/37/42/47LH3***, 37/42/47LH5***, 42/47LH9***

1

the TV screen side down on a cushioned

 

 

otect the screen from damage.

2

TV as shown.

3

bolts securely using the holes in the

 

 

TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only 32/37/42/47LH7***

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

PREPARATION

2Assemble the parts of the Stand Body with the Stand Base of the TV.

32LH7*** 47LH7*** 37LH7***

M4x20

Stand Body

 

M4x16

M4x20

Stand Base

42LH7***

M4x20

Stand Body

Stand Base

3Assemble the TV as shown.

4Fix the 4 bolts securely using the holes in the back the TV.

32/37LH7***

42/47LH7***

M4x20

M4x16

13

LG 37LH50YR, 42LH70YR, 37LH70YR, 42LH50YR, 32LH70YR User Manual

PREPARATION

NOT USING THE DESK-TYPE STAND

Here shown may be somewhat different from your TV.

When installing the wall-mounted unit, use the protection cover.

 

Only 19/22LH2***

PREPARATION

1

Carefully place the TV screen side down on a cush-

 

 

ioned surface to protect the screen from damage.

from TV.

Detach the Stand Body from T V.

Only 32/42LF2***

Insert the PROTECTION COVER into the TV until clicking sound.

Insert the PROTECTION COVER into the TV until clicking sound.

Only 32/37/42/47LH7***

PROTECTION COVER

paper adhere it

Insert the

Only 42/47LH9***

After removing the protection paper from the protection cover, adhere it to the TV as shown.

Protection Cover

5

14

(37/42/47LH7*** only)

ATTACHING THE TV TO A DESK

Here shown may be somewhat different from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.

Only 26/32/37/42LH2***,

32/42LF2***, 32/37/42LH3***,

26LU5***, 37/42LH5***,

32/37LH7***, 42LH9***

1-Screw (provided as parts of the product)

Stand

TO USE THE STAND REAR COVER

Here shown may be somewhat different from your TV. Install the STAND REAR COVER as shown.

PREPARATION

STAND REAR COVER

Grip the knob in your fingers and pull it.

Desk

! WARNING

G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

SWIVEL STAND

(Except 19/22/26LU5***, 19/22LH2***)

This feature is not available for all models.

After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.

POSITIONING YOUR DISPLAY

(Only 19/22LH2***)

Here shown may be somewhat different from your TV.

Adjust the position of the panel in various ways for maximum comfort.

Tilt range

12

0

0

3

! NOTE

GThe following model is a fixed stand type model without the Tilt and Swivel features so excessive pressure may damage the set.

- 19/22/26LU5***

15

PREPARATION

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Here shown may be somewhat different from your TV.

 

Only 19/22LH2***

Only 19/22/26/32/37/42LH2***,

 

32/42LF2***, 32/37/42/47LH3***,

1

EXTERNAL EQUIPMENT SETUP section.

1

External Equipment Setup section of the manual.

2

2

 

CABLE MANAGEMENT CLIP

3

Fit the CABLE MANAGEMENT CLIP as shown.

 

3

MENT CLIP as

CABLE MANAGEMENT CLIP

CABLE MANAGEMENT CLIP as

How to remove the CABLE MANAGEMENT CLIP(Only 19/22LH2***)

G Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.

Only 19/22/26LU5***

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

16

Only 32/37/42/47LH7***

Align the hole with the tab on the CABLE 1 MANAGEMENT CLIP.

Turn the CABLE MANAGEMENT CLIP as shown.

Note : that excessive force might cause damage to the product when using Cable Management clip.

DETACHING STAND

Here shown may be somewhat different from your TV.

Only

1

Carefully

-

 

ioned surface

 

2LooseTV.

PREPARATION

(Only 26LU5***)

 

 

 

 

 

 

 

3 Loose

bolts and then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Base

om T V.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CABLE MANAGEMENT CLIP

2 Connect the cables as

 

To connect additional

Cover Base

External equipment Se

(Only 26LU5***)

 

4 Detach the Stand Body from T V.

 

Stand Body

! NOTE

G Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

-If the TV is dropped, you may be injured or the TV may be damaged.

17

PREPARATION

PREPARATION

CAREFUL INSTALLATION ADVICE

A You should purchase necessary components to fix the TV safety and secure to the wall on the market.

A Position the TV close to the wall to avoid the possibility of it falling when pushed.

A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

1

 

1

 

2

2

 

 

1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3

3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

GWhen moving the TV undo the cords first.

GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

How to secure the power cable

(Only 32/37/42/47LH7***)

Secure the power cable with the PROTECTIVE BRACKET and the bolt as shown. It will help prevent the power cable from being removed by accident.

Bolt

PROTECTIVE BRACKET

AThe TV can be installed in various ways such as on a wall, or on a desktop etc.

AThe TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker

DESKTOPPEDESTALINSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

4 inches

4 inches

4 inches

4 inches

 

18

WALL MOUNT: HORIZONTAL INSTALLATION

A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.

A We recommend that you purchase a wall mounting bracket which supports VESA standard.

A LG recommends that wall mounting be performed by a qualified professional installer.

A First you connect the USB extension cable to the USB IN terminal, and then hang it on the wall.(Only 32/37/42/47LH7***)

! NOTE

GShould Install wall mount on a solid wall perpendicular to the floor

GShould use a special wall mount, if you want to install it to ceiling or slanted wall.

GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.

GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.

GLG is not liable for any accidents or damage to property or TV due to incorrect installation:

-Where a non-compliant VESA wall mount is used.

-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.

-Not following the recommended Installation method.

4 inches

4 inches

 

4 inches

4 inches

4 inches

A

B

Model

VESA

Standard

Quantity

(A * B)

Screw

 

 

 

47LH9***

200

* 200

M6

4

 

42LH9***

200

* 200

M6

4

 

47LH7***

200

* 200

M6

4

 

42LH7***

200

* 200

M6

4

 

37LH7***

200

* 200

M6

4

 

32LH7***

200 * 100

M4

4

 

42LH6***

200

* 200

M6

4

 

32LH6***

200 * 100

M4

4

 

55LH5***

400

* 400

M6

4

 

47LH5***

200

* 200

M6

4

 

42LH5***

200

* 200

M6

4

 

37LH5***

200

* 200

M6

4

 

26LU5***

200 * 100

M4

4

 

22LU5***

100

* 100

M4

4

 

19LU5***

100

* 100

M4

4

 

47LH3***

200

* 200

M6

4

 

42LH3***

200

* 200

M6

4

 

37LH3***

200

* 200

M6

4

 

32LH3***

200 * 100

M4

4

 

42LH2***

200

* 200

M6

4

 

37LH2***

200

* 200

M6

4

 

M4

 

32LH2***

200 * 100

4

 

M4

 

26LH2***

200 * 100

4

 

M4

 

22LH2***

100

* 100

4

 

M4

 

19LH2***

100

* 100

4

 

 

 

42LF2***

200

* 200

M6

4

 

M4

 

32LF2***

200 * 100

4

 

 

 

PREPARATION

19

PREPARATION

PREPARATION

KENSINGTONSECURITYSYSTEM

This feature is not available for all models.

Here shown may be somewhat different from your TV.

The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.

For further information, contact http://www.kensington.com, the internet homepage of the Kensington

company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a.If the TV feels cold to the touch, there may be a small “flicker” when when it is turned on. This is normal, there is nothing wrong with TV.

b.Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

c.Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effects on the screen.

20

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction.

An antenna cable and converter are not supplied.

ON

OFF

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Antenna

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

ANTENNA

IN

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

UHF

 

Signal

 

Amplifier

 

ANTENNA

VHF

IN

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.

If signal needs to be split for two TVs, use an antenna signal splitter for connection.

PREPARATION

21

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 37/42/47/55LH5*** models.

Here shown may be somewhat different from your TV.

HD RECEIVER SETUP

Connecting with a component cable

1

Connect the video outputs (Y, PB, PR) of the digital set

 

 

top box to the COMPONENT IN VIDEO jacks on the

 

 

 

2

 

 

TV.

 

 

 

 

 

the digital set-top box to

1

 

 

VIDEO

AUDIO

 

 

 

the COMPONENT IN AUDIO jacks on the TV.

COMPONENT IN

 

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select Component1 input source using the INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button on the remote control.

 

 

 

 

 

 

 

 

 

 

 

1

 

 

2

 

 

 

 

If connected to COMPONENT IN 2, select

 

 

 

 

 

 

 

 

 

 

 

Component2 input source.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal

Component

HDMI

 

 

 

 

 

 

480i/576i

O

X

480p/576p

O

O

720p/1080i

O

O

1080p

O

O

(50/60Hz only)

(24Hz/30Hz/50Hz/60Hz)

 

 

 

 

22

Connecting a set-top box with an HDMI cable

1

Connect the digital set-top box to HDMI/DVI IN 1, DMI IN 2(Except 19/22LH2***) or HDMI IN (Except 19/22/26/32/37/42LH2***, 32/42LF2***,

19/22LU5***) jack on the TV.

Refer to the owner’s manual for the digital set-top box.)

Select

DMI3(Except 19/22/26/32/37/42LH2***, 32/42LF2***, 19/22LU5***)input source using the NPUT button on the remote control.

! NOTE

G Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version 1.3,

flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

G We recommed using under 10m of the HDMI cable. When using over the length, connect a amplifier or repeater.

/DVI IN

2

1(DVI)

1

Connecting with an HDMI to DVI cable

 

 

 

(CONTROL)

 

 

 

 

 

 

 

RS-232C IN

 

 

 

 

 

 

/DVI IN

 

AUDIO IN

 

 

 

 

2

 

 

 

 

 

 

 

RGB IN (PC)

(RGB/DVI)

 

 

 

 

 

 

 

 

1

Connect the digital set-top box to HDMI/DVI IN

1

1(DVI)

 

 

 

 

 

 

 

VIDEO

/MONO AU

 

jack on the TV.

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Y

PR

L

R

 

 

output of the digital set-top box to

1

 

AUDIO

VARIABLE AUDI

 

/DVI) jack on the TV.

 

 

 

 

 

 

COMPONENT IN

AV OUT

 

 

 

 

1

 

2

 

manual for the digital set-top box.)

Select HDMI1 input source using the INPUT button on the remote control.

SETUP EQUIPMENT EXTERNAL

23

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

DVD SETUP

 

 

Connecting with a component cable

 

 

1

Connect the video outputs (Y, PB, PR) of the DVD to the

2

 

 

COMPONENT IN VIDEO jacks on the TV.

 

 

 

 

1

 

 

the audio outputs of the DVD to the

VIDEO

AUDIO

 

 

 

PONENT IN AUDIO jacks on the TV.

COMPONENT IN

 

Turn on the DVD player, insert a DVD.

Select Component1 input source using the INPUT button on the remote control.

If connected to COMPONENT IN 2, select

1

2

Component2 input source.

 

 

Refer to the DVD player's manual for operating instructions.

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Y

PB

PR

 

 

 

 

 

 

 

 

 

Y

PB

PR

Video output ports

Y

B-Y

R-Y

on DVD player

Y

Cb

Cr

 

Y

Pb

Pr

 

 

 

 

24

Connecting the HDMI cable

Connect the HDMI output of the DVD to the

1HDMI/DVI IN 1, HDMI IN 2(Except 19/22LH2***) or HDMI IN 3(Except 19/22/26/32/37/42LH2***, 32/42LF2***, 19/22LU5***) jack on the TV.

HDMI3(Except 19/22/26/32/37/42LH2***, 32/42LF2***, 19/22LU5***) input source using the INPUT button on the remote control.

Refer

/DVI IN

2

1(DVI)

1

! NOTE

G The TV can receive video and audio signals simultaneously when using a HDMI cable.

G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

G Check that your HDMI cable is version 1.3 or higher.

If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

G We recommed using under 10m of the HDMI cable. When using over the length, connect a amplifier or repeater.

SETUP EQUIPMENT EXTERNAL

25

EXTERNAL EQUIPMENT SETUP

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

SETUP EQUIPMENT EXTERNAL

Connecting with a RF Cable

VIDEO

/MONO AUDIO

1INAV

 

 

 

ANT OUT S-VIDEO VIDEO L R

 

 

1

VARIABLE AUDIO OUT ANTENNA

AV OUT

IN

 

 

 

OUTPUT

 

 

SWITCH

Wall Jack

2

Antenna

1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

the antenna cable to the ANT IN socket of the VCR.

Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

26

Connecting with a RCA cable

 

 

 

 

1

and

 

VIDEO

L/MONO AUDIO R

AV

 

Left

 

 

 

IN1

 

= white, and Audio Right = red)

L

R

 

 

2

Insert a video tape into the VCR and press PLAY on

 

AUDIO

 

 

ENT IN

 

AV

 

 

the VCR. (Refer to the VCR owner’s manual.)

 

 

 

 

3

Select

 

 

1

 

 

the

 

 

 

 

If connected to AV IN 2, select AV2 input source.

! NOTE

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

AV IN2

S-VIDEO VIDEO

L

R

ANT IN

OUTPUT

 

 

ANT OUT

SWITCH

 

 

 

or

1

S-VIDEO VIDEO

L

R

ANT IN

OUTPUT

 

 

ANT OUT

SWITCH

 

 

 

SETUP EQUIPMENT EXTERNAL

27

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

SETUP EQUIPMENT EXTERNAL

VIDEO L R

IN 3

1

or

 

Camcorder

 

 

 

 

 

 

 

 

(CONTROL)

 

 

 

 

 

RGB IN (PC)

AUDIO IN

 

 

Video Game Set

 

(RGB/DVI)

 

 

AV

 

 

 

 

 

 

 

VIDEO

L/MONO AUDIO R

 

 

 

 

 

IN1AV

 

 

 

L

R

 

 

 

 

AUDIO

 

ANTENNA

 

 

 

NT IN

 

IN

 

 

 

 

 

 

 

 

 

 

VIDEO

L

R

VIDEO AUDIO R

1

1

DIO/VIDEO jacks between TV and external equipment. Match the jack colours .

 

(Video = yellow, Audio Left = white, and Audio Right = red)

2Select AV1 input source with using the INPUT button on the remote control. If connected to AV IN 2, select AV2 input source.

3Operate the corresponding external equipment. Refer to external equipment operating guide.

28

Loading...
+ 96 hidden pages