LG 34UM88C, 34UM88 User Manual

OWNER’S MANUAL

IPS LED MONITOR

(LED Monitor*)

* LG LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future

reference.

34UM88

34UM88C

www.lg.com

ENGLISH

TABLE OF CONTENTS

LICENSE ---------------------------------3

ASSEMBLING AND PREPARING ------4

- Product Composition --------------------------------4

- Supported Drivers and Software --------------------5

- Product and Button Description --------------------6 How to Use the Joystick Button Input Connector

- Moving and Lifting the Monitor ---------------------8

- Installing the Monitor -------------------------------9 Assembling the Stand Installing on a Table Adjusting the Stand Height Adjusting the Angle Tidying up Cables Using the Kensington Lock Installing the Wall Mount Plate Installing on the Wall

USING THE MONITOR ---------------- 14

USER SETTINGS ---------------------- 18

- Activating the Main Menu ------------------------- 18 Main Menu Features

- User Settings -------------------------------------- 19 Menu Settings Quick Settings PBP Picture Sound General Reset

TROUBLESHOOTING ----------------- 29

PRODUCT SPECIFICATION ---------- 31

- Factory Support Mode ---------------------------- 33

- HDMI Timing (Video) ------------------------------ 34

- Power LED ----------------------------------------- 34

- Connecting to a PC -------------------------------- 14 HDMI Connection DisplayPort Connection Thunderbolt Connection

- Connecting AV Devices ---------------------------- 16 HDMI Connection

- Connecting Peripherals ---------------------------- 16 USB Cable connection - PC Connecting Headphones

LICENSE

Each model has different licenses. Visit

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association.

MaxxAudio and additional MAXX trademarks are trademarks and/or registered trademarks of Waves Audio Ltd.

The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.

www.lg.com

for more information on the license.

ENGLISH

ASSEMBLING AND PREPARING

Product Composition

Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here.

CD (Owner’s Manual/ Software/

Guides)/ Cards Power Cord AC/DC Adapter HDMI Cable

DisplayPort Cable Stand Body Stand Base Cable Holder

4 Screws

(M4 x L12) Clear Sheet

CAUTION

• Always use genuine LG components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of unauthorized components.

• It is recommend that use the supplied components.

• If you use generic cables not certified by LG, the screen may not display or there may be image noises.

NOTE

• The components may look different from those illustrated here.

• Without prior notice, all product information and specifications contained in this manual are subject to change to improve the

performance of the product.

• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer from which you

purchased the product.

• The power cord provided may differ depending upon the region.

Supported Drivers and Software

Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product package.

Drivers and Software Installation Priority 34UM88 34UM88C

Monitor Driver Recommended O O

ASM Driver Required O X

OnScreen Control Recommended O O

Dual Controller Optional O O

TRUE COLOR PRO Optional O O

• Required and Recommended: You can download and install the latest version from the enclosed CD or from the LGE website

(

www.lg.com

• Optional: You can download and install the latest version from the LGE website (

www.lg.com

ENGLISH

Product and Button Description

Power LED

• On : Power on

• Off : Power off

Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.

Basic Functions

Power on Press the joystick button once with your finger to turn on the monitor.

Power off

Volume Control

Press and hold the joystick button once with your finger to turn off the monitor.

You can control the volume by moving the joystick button left/right.

NOTE

• The joystick button is located at the bottom of the monitor.

Input Connector

34UM88

ENGLISH

34UM88C

ENGLISH

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

• Place the monitor in the original box or packing material

before attempting to move it.

• Before moving or lifting the monitor, disconnect the power

cord and all other cables.

• Hold the bottom and side of the monitor frame firmly. Do

not hold the panel itself.

CAUTION

• Avoid touching the monitor screen as much as possible.

- This may result in damage to the screen or some of the pixels used to create images.

• If you use the monitor panel without the stand base, its

joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

• When holding the monitor, the screen should face toward

you to prevent it from being scratched.

• When transporting the monitor, do not expose the

monitor to shock or excessive vibration.

• When moving the monitor, keep it upright and never turn

the monitor on its side or tilt it sideways.

Installing the Monitor

Assembling the Stand

Stand Body

ENGLISH

Stand Base

Stand Body

CAUTION

• Illustrations in this document represent typical procedures,

so they may look different from the actual product.

• To protect the screen from scratches, cover the surface

with a soft cloth.

• Applying excessive force when tightening screws may

cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

• Do not carry the monitor upside down by just holding the

base. This may cause the monitor to fall off the stand and could result in personal injury.

• When lifting or moving the monitor, do not touch the

monitor screen. The force applied to the monitor screen may cause damage to it.

NOTE

• You can disassemble the stand in the reverse order of the

assembly.

ENGLISH

Installing on a Table

1 Lift the monitor and place it on the table in an upright

position. Place the monitor at least 100 mm away from the wall to ensure sufficient ventilation.

100 mm

Cautions When Connecting Power Cord

100-240 V ~

• Make sure to use the power cord that is provided in the

product package and connect it to a grounded power outlet.

• If you need another power cord, please contact your local

dealer or the nearest retail store.

2 Connect the power adapter to the monitor and then plug

the power cord into the wall outlet.

3 Press the joystick button on the bottom of the monitor

to turn on the monitor.

CAUTION

• Unplug the power cord before moving or installing the

monitor. There is risk of electric shock.



Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an

upright position.

2 Handle the monitor with both hands for safety.

3 The height can be adjusted up to 120 mm.

120 mm

NOTE

Adjusting the Angle

1 Place the monitor mounted on the stand base in an

upright position.

2 Adjust the angle of the screen. The angle of the screen

can be adjusted forward or backward from -5° to 20° for a comfortable viewing experience.

FrontRear

WARNING

• To avoid injury to the fingers when adjusting the screen,

do not hold the lower part of the monitor’s frame as illustrated below.

ENGLISH

• When adjusting the screen height, do

not place your hand on the stand body to avoid injury to your fingers.

• Be careful not to touch or press the screen area when

adjusting the angle of the monitor.

+ 24 hidden pages