LG 34UM65-P Owner's Manual

Owner's Manual

IPS LED MONITOR (LED MONITOR)

Please read the safety information carefully before using the product.

IPS LED Monitor (LED Monitor) Model List

25UM64 25UM65 34UM64 34UM65

www.lg.com

TABLE OF CONTENTS

3 LICENSE

ENGLISH

4 ASSEMBLING AND

PREPARING

4 Product Composition

5 Product and Button Description

6 - How to Use the Joystick Button

7 - Input Connector

8 Moving and Lifting the

Monitor

9 Installing the Monitor

9 - Assembling the Stand

12 - Detaching the Stand

15 - Installing on a Table

16 - Adjusting the angle

17 - Tidying up Cables

18 - Installing the Wall Mount Plate

18 - Installing on the Wall

20 - Using the Kensington Lock

24 INSTALLING THE LG

MONITOR SOFTWARE

26 USER SETTINGS

26 Activating the Main Menu

26 - Main Menu Features

27 User Settings

27 - Menu Settings

28 - Ratio

29 - Function

30 - PBP

31 - Picture

32 - Color

33 - Settings

34 - Reset

35 - Reader

36 TROUBLESHOOTING

21 USING THE MONITOR

21 Connecting to a PC

21 - DVI Connection

22 - HDMI Connection

22 - DisplayPort Connection

23 Connecting AV Devices

23 - HDMI Connection

23 Connecting Peripherals

23 - Connecting Headphones

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

38 PRODUCT SPECIFICATION

40 Factory Support Mode

(Preset Mode, DVI-D/HDMI/DisplayPort

PC)

40 HDMI Timing (Video)

40 Power LED

41 PROPER POSTURE

41 Proper Posture for Using the Monitor

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for dual-mode source devices are all registered trademarks of the Video Electronics Standards Association.

ENGLISH

ASSEMBLING AND PREPARING

Product Composition

ENGLISH

Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product. Note that the product and related components may look different from those shown here.

CD (Owner's Manual /

Software) / Guides /

Cards

HDMI cable

25UM65

25UM64

Stand Base Stand Body Screw Cover

34UM65

34UM64

Power cord AC/DC Adapter

(Depending upon country)

AC/DC Adapter

(Depending upon

country)

Two Screws

(M4 x 10)

Stand Base Screw Cover

Two Screws

(M4 x 10)

Clear sheet

CAUTION

yAlways use genuine LG components to ensure safety and product performance. yThe product warranty will not cover damage or injury caused by the use of unauthorized components.

ASSEMBLING AND PREPARING

NOTE

yThe components may look different from those illustrated here. yWithout prior notice, all product information and specifications contained in this manual are subject to

change to improve the performance of the product.

yTo purchase optional accessories, visit an electronics store or an online shopping site, or contact the

retailer from which you purchased the product.

yThe power cord provided may differ depending upon the region.

Product and Button Description

25UM65

25UM64

ENGLISH

Power Indicator

yOn Power on yOff Power off

NOTE

yThe joystick button is located at the bottom of the monitor.

Joystick Button

ASSEMBLING AND PREPARING

ENGLISH

34UM65

Power Indicator

34UM64

yOn Power on yOff Power off

Joystick Button

NOTE

yThe joystick button is located at the bottom of the monitor.

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.

Basic Functions

Press the joystick button once with your finger to turn on the monitor.

Press and hold the joystick button once with your finger to turn off the monitor.

You can control the volume by moving the joystick button left/right.

◄/►

Power on

Power off

Volume

Control

Input Connector

25UM65

25UM64

ASSEMBLING AND PREPARING

ENGLISH

34UM65

DVI-D IN

34UM64

HDMI IN 2

DP IN

HDMI IN 2

HDMI IN 1

AUDIO IN(PC)

H/P

DC-IN

(19 V )

AUDIO IN

(PC)

H/P

DC-IN

(19 V )

DVI-D IN

DP IN

HDMI IN 1

ASSEMBLING AND PREPARING

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being

ENGLISH

scratched or damaged and to ensure safe transportation, regardless of its shape or size.

yPlace the monitor in the original box or pack-

ing material before attempting to move it.

yBefore moving or lifting the monitor, discon-

nect the power cord and all other cables.

yHold the bottom and side of the monitor frame

firmly. Do not hold the panel itself.

yWhen moving the monitor, keep it upright and

never turn the monitor on its side or tilt it sideways.

CAUTION

yAvoid touching the monitor screen as much as

possible.

- This may result in damage to the screen or some of the pixels used to create images.

yWhen holding the monitor, the screen should

face toward you to prevent it from being scratched.

yWhen transporting the monitor, do not expose

the monitor to shock or excessive vibration.

yIf you use the monitor panel without the stand

base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Installing the Monitor

Assembling the Stand

CAUTION

yApplying excessive force when tightening

screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

yIf you use the monitor panel without the

stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

ASSEMBLING AND PREPARING

Tighten two screws into the back of the stand

body and close the screw cover.

ENGLISH

25UM65

Place the screen face down.

25UM64

CAUTION

yTo protect the screen from scratches, cover

the surface with a soft cloth.

Check the direction of the stand body (front,

back) and then mount the stand body onto the stand hinge.

Stand Hinge

Stand Body

Screw Cover

ENGLISH

Stand Base

ASSEMBLING AND PREPARING

Fix the stand base to the stand body. Turn the screws on the stand base to the right.

Stand Body

ASSEMBLING AND PREPARING

34UM65

Place the screen face down.

34UM64

Stand Hinge

CAUTION

yTo protect the screen from scratches, cover

the surface with a soft cloth.

Mount the stand base onto the stand hinge as

shown in the illustration. Fix two screws into the back of the stand base and close the screw cover.

ENGLISH

100 mm

(3.9 inch)

Screw Cover

CAUTION

yThe stand height is adjustable by 20 mm

(0.7 inch).

yWhen tightening the screws after mounting

the stand base onto the stand hinge, be sure to hold the stand base with your hand. Otherwise, the product may fall, causing personal injury or damage to the product.

yBe careful not to hurt your hand on the edges

of the screw covers.

Stand Base

120 mm

(4.7 inch)

ASSEMBLING AND PREPARING

Detaching the Stand

CAUTION

yIllustrations in this document represent typical

ENGLISH

procedures, so they may look different from the actual product.

yDo not carry the monitor upside down by just

holding the base. This may cause the monitor to fall off the stand and could result in personal injury.

yWhen lifting or moving the monitor, do not

touch the monitor screen. The force applied to the monitor screen may cause damage to it.

yIf you use the monitor panel without the stand

base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Turn the screws on the stand base to the left to

detach the stand base from the stand body.

Stand Body

Stand Base

25UM65

Place the screen face down.

25UM64

CAUTION

yTo protect the screen from scratches, cover

the surface with a soft cloth.

Lift up the screw cover to detach the screw

cover from the stand body. Remove the screws from the back of the stand body using a screwdriver and detach the stand body from the stand hinge as shown in the illustration.

Stand Body

Stand Hinge

ASSEMBLING AND PREPARING

ENGLISH

Screw Cover

ASSEMBLING AND PREPARING

ENGLISH

34UM65

Place the screen face down.

34UM64

CAUTION

yTo protect the screen from scratches, cover

the surface with a soft cloth.

Detach the screw cover from the stand base as shown in the illustration and then remove

the two screws on the back to detach the stand base from the hinge.

Stand Base

CAUTION

yWhen removing the screws to detach the

stand base from the hinge, be sure to hold the stand base with your hand. Otherwise, the product may fall, causing personal injury or damage to the product.

Screw Cover

+ 30 hidden pages