Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
34UM59
34UM59B
34UM59R
www.lg.com
ENGLISH
2
CONTENTS
3 LICENSE
4 ASSEMBLING AND
PREPARING
4 Product Components
5 Supported Drivers and Software
6 Component and Button Description
6 - How to Use the Joystick Button
7 Input Connector
8 Moving and Lifting the Monitor
9 Installing the Monitor
9 - Assembling the stand base
10 - Using the cable holder
11 - Installing onto a table
12 - Adjusting the angle
13 - Using the Kensington lock
13 - Detaching the Stand Body
13 - Installing the wall mount plate
14 - Installing to a wall
22 - -Reset
23 - -Picture Mode
24 TROUBLESHOOTING
26 SPECIFICATIONS
26 34UM59 34UM59B 34UM59R
27 Factory Support Mode (Preset Mode, PC)
27 HDMI
27 HDMI Timing (Video)
27 Power Indicator
15 USING THE MONITOR
15 Connecting to a PC
15 - HDMI connection
15 Connecting to AV Devices
15 - HDMI connection
16 - Connecting Headphones
17 CUSTOMIZING SETTINGS
17 Activating the Main Menu
18 Customizing settings
18 - Menu Settings
18 - -Quick Settings
19 - -Picture
21 - -General
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
3
ENGLISH
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
ENGLISH
4
ASSEMBLING AND PREPARING
Product Components
Please check whether all the components are included in the box before using the product. If there are missing components,
contact the retail store where you purchased the product. Note that the product and components may look different from those
shown here.
or
CD / Card
HDMI Cable
(This cable is not included in
all countries. )
Stand Body
Power Cord AC-DC Adapter
(Depending on the country)
or
HDMI-DVI Cable
(This cable is not included in
all countries. )
Cable Holder
AC-DC Adapter
(Depending on the country)
Stand Base
CAUTION
Always use genuine components to ensure safety and product performance.
y
The product warranty will not cover damage or injury caused by the use of counterfeit components.
y
It is recommend that use the supplied components.
y
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
y
NOTE
Note that the components may look different from those shown here.
y
Without prior notice, all information and specifications in this manual are subject to change to improve the performance
y
of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you
y
purchased the product.
Supported Drivers and Software
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software Installation Priority 34UM59/34UM59B/34UM59R
Monitor Driver Recommended O
OnScreen Control Recommended O
Dual Controller Optional O
5
ENGLISH
ENGLISH
6
Component and Button Description
Joystick Button
Power LED
On: power is on
y
Off: power is off
y
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
Press the joystick button once with your finger to turn on the
monitor.
You can control the volume by moving the joystick button left/right.
◄/►
Power on
Power off Press and hold the joystick button once with your finger to turn off the monitor.
Volume
Control
NOTE
The joystick button is located at the bottom of the monitor.
y
Input Connector
7
ENGLISH
ENGLISH
8
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions
to prevent the monitor from being scratched or damaged and
to ensure safe transportation regardless of its shape or size.
It is advisable to place the monitor in the original box
y
or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the
y
power cord and all cables.
Hold the top and bottom of the monitor frame firmly.
y
Do not hold the panel itself.
When holding the monitor, the screen should face
y
away from you to prevent it being scratched.
CAUTION
As far as possible, avoid touching the monitor screen.
y
This may result in damage to the screen or some of
the pixels used to create images.
If you use the monitor panel without the stand base,
y
its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor
or human injury. In addition, this may cause the joystick
button to malfunction.
When moving the monitor, avoid any strong shock or
y
vibrations to the product.
When moving the monitor, keep it upright, never turn
y
the monitor on its side or tilt it sideways.
Installing the Monitor
Assembling the stand base
1
CAUTION
To protect the screen from scratches, cover the
y
surface with a soft cloth.
9
3
ENGLISH
4
2
NOTE
Stand Body
Stand Base
Press the stand until the button reaches the top.
y
ENGLISH
10
CAUTION
Illustrations in this document represent typical
y
procedures, so they may look different from the
actual product.
Applying excessive force when tightening screws
y
may cause damage to the monitor. Damage caused in
this way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding
y
the base. This may cause the monitor to fall off the
stand and could result in personal injury.
When lifting or moving the monitor, do not touch
y
the monitor screen. The force applied to the monitor
screen may cause damage to it.
NOTE
You can disassemble the stand in the reverse order of
y
the assembly.
Using the cable holder
Arrange the cables using the cable holder as shown in the
illustration.
Cable Holder
11
Installing onto a table
Lift the monitor and place it on the table in an upright
1
position.
Place at least 100 mm away from the wall to ensure
sufficient ventilation.
100 mm
100 mm
100 mm
Connect the power adapter to the monitor and then plug
2
the power cord into the wall outlet.
100 mm
Cautions When Connecting Power Cord
100-240 V ~
Make sure to use the power cord that is provided in
y
the product package and connect it to a grounded
power outlet.
If you need another power cord, please contact your
y
local dealer or the nearest retail store.
ENGLISH
3
2
1
or
Press the joystick button on the bottom of the monitor
3
to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or installing
y
the monitor. There is risk of electric shock.
ENGLISH
12
Adjusting the angle
Place the monitor in an upright position, mounted on the
1
stand base.
Adjust the angle of the screen. The angle of the screen
2
can be adjusted forwards or backwards for a comfortable
viewing experience.
NOTE
The left or right side of the monitor head can be
y
slightly rotated up or down (up to 3°). Adjust the
horizontal level of the monitor head.
Monitor head
Rear Side
Front Side
WARNING
To avoid injury to the fingers when adjusting the
y
screen, do not hold the lower part of the monitor's
frame as illustrated below.
Be careful not to touch or press the screen area when
y
adjusting the angle of the monitor.
13
Using the Kensington lock
The Kensington security system connector is located at the
back of the Monitor set.
For more information on installation and usage, refer to the
Kensington lock user manual or visit the website at http://
www.kensington.com.
Connect the Kensington security system cable between the
Monitor set and a table.
Detaching the Stand Body
Place the monitor’s screen face down. To protect the
1
screen from scratches, cover the surface with a soft
cloth.
Remove the stand from the monitor by pressing
2
the button on the bottom center of the back of the
monitor.
ENGLISH
NOTE
Use of the Kensington lock is optional.
y
The accessories can be purchased at your local
electronics store.
Installing the wall mount plate
This monitor supports the specification of the standard wall
mount plate or compatible device.
Place the screen face down. To protect the screen from
1
scratches, cover the surface with a soft cloth.
Place the wall mount plate onto the monitor and align it
2
with the screw holes.
Tighten the four screws to fix the plate to the monitor
3
using a screwdriver.
NOTE
The wall mount plate is sold separately.
y
For more information on installation, refer to the wall
y
mount plate's installation guide.
Be careful not to use excessive force when mounting
y
the wall mount plate, as this can damage the monitor's
screen.
ENGLISH
14
Installing to a wall
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
100 mm
100 mm
100 mm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to
the monitor and to the wall.
100 mm
Wall Mount (A x B)
y
A
B
CAUTION
Unplug the power cord before moving or installing
y
the monitor to avoid electric shocks.
Installing the monitor on the ceiling or on a slanted
y
wall may result in the monitor falling off, which
could lead to injury. Please use the genuine LG wall
mounting bracket. For more information, contact
your local retail store or a qualified installer.
Applying excessive force when fastening screws may
y
cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that
y
conform to the VESA standard. Damage caused by
the use or misuse of inappropriate components will
not be covered by the product warranty.
Screw length from outer surface of back cover should
y
be under 8mm.
Wall mount Pad
1 If you use screw longer than standard, the monitor might
be damaged internally.
2 If you use improper screw, the product might be damaged
and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Wall Mount (A x B) 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate
(Optional)
LSW 149
Back Cover
Wall mount Pad
Back Cover
Standard screw:
Max.8mm
NOTE
Use the screws specified by the VESA standard.
y
The wall mount kit includes the installation guide and
y
all necessary parts.
The wall mounting bracket is optional. The accessories
y
can be purchased at your local retail store.
The length of the screw may differ for each wall
y
mounting bracket. Ensure the correct length screw is
used.
For more information, please refer to the user manual
y
for the wall mounting bracket.
USING THE MONITOR
15
ENGLISH
Connecting to a PC
This monitor supports the *Plug and Play feature.
y
*Plug and Play: A feature that allows you to add a
device to your computer without having to reconfigure
anything or install any manual drivers.
HDMI connection
Transmits the digital video and audio signals from your PC
and A/V devices to the monitor. Connect your PC and AV device to the monitor with the HDMI cable as illustrated below.
Press the menu button and then select the input option from
the input menu.
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from your
PC and A/V devices to the monitor. Connect your PC
and AV device to the monitor with the HDMI cable as
illustrated below.
Press the menu button and then select the input option
from the input menu.
NOTE
If you use HDMI PC, it can cause compatibility problem.
y
Use a certified cable with the HDMI logo attached. If
y
you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
Recommended HDMI cable types
y
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
NOTE
If you use HDMI PC, it can cause compatibility
y
problem.
Use a certified cable with the HDMI logo attached.
y
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
Recommended HDMI cable types
y
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
ENGLISH
16
Connecting Headphones
Connect peripherals to the monitor via the headphones port.
Connect as illustrated.
(sold separately)
NOTE
Peripheral devices are sold separately.
y
If you use angled earphones, it may cause a problem
y
with connecting another external device to the
monitor. Therefore, it is recommended to use straight
earphones.
Angled Straight
Depending on the audio settings of the PC and
y
external device, headphones and speaker functions
may be limited.
CUSTOMIZING SETTINGS
Activating the Main Menu
Press the joystick button on the bottom of the monitor.
1
Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
2
Press the joystick button once more to exit the main menu.
3
Button Menu Status Description
Main menu disabled Enables the main menu.
17
ENGLISH
Power Indicator
Joystick Button
Main menu enabled
◄
►
▲
▼
Main Menu Features
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off the
monitor this way at any time, including when the OSD is on.)
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Enters the menu features.
Main menu disabled Adjusts the monitor volume level.
Main menu enabled Operates the Input change.
Main menu disabled Enables the main menu.
Main menu enabled Enters the picture mode feature.
Main menu disabled Enables the main menu
Main menu enabled Turns off the monitor.
.
Main Menu Description
Menu Configures the screen settings.
Picture Mode
Input
Monitor off Turns off the monitor.
Select picture mode to achieve the best display effect.
You can choose the input signal.
• When two input signals are connected, you can
select the input signal you want.
Exit Exits the main menu
.
ENGLISH
18
Customizing settings
Menu Settings
-Quick Settings
To view the OSD menu, press the joystick button at the bot-
1
tom of the monitor and then enter the Menu.
Go to Quick Settings >
2
Configure the options following the instructions that appear in
3
the bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
5
you exit.
Brightness
by moving the joystick.
Each option is described below.
Menu > Quick Settings Description
Brightness
Contrast
Volume Adjusts the volume.
Adjusts the color contrast and brightness of the screen.
NOTE
Jog joystick button down (
y
function.
Input Selects the current input mode.
Ratio Adjusts the screen ratio.
Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays a video according to the input video signal aspect ratio.
) in the Volume menu will enable/disable the Mute
NOTE
The display may look the same for Wide, Original options at the recommended resolution (2560 x 1080).
y
The ratio is disabled in the interlaced signal.
y
-Picture
To view the OSD menu, press the joystick button at the bot-
1
tom of the monitor and then enter the Menu.
Picture
Go to
2
Configure the options following the instructions that appear in
3
the bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
5
you exit.
by moving the joystick.
19
ENGLISH
Each option is described below.
Menu > Picture Description
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
FPS 1 This mode is optimized for FPS games.
FPS 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games.
RTS This mode is optimized for RTS Game.
Custom
(Game)
Picture Adjust Sharpness Adjusts the sharpness of the screen.
Black Level Sets the offset level (for HDMI only).
DFC Adjusts the brightness automatically according to the screen.
bright, you can control brightness in Menu OSD.
In this mode, users can customize various elements including game-related options.
yOffset: as a reference for a video signal, this is the darkest color the monitor can display.
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast
ratio of the screen.
20
ENGLISH
Game Adjust Black Stabilizer Black Stabilizer
Response Time Sets a response time for displayed pictures based on the speed of the
FreeSync
: You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on
the screen. (You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and
increases the dynamic contrast on the screen.
screen. For a normal environment, it is recommended that you use Normal.
For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
High Sets the response time to High.
Middle Sets the response time to Middle.
Low Sets the response time to Low.
Off Sets the response time to Off.
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
NOTE
To use the FreeSync feature, a graphic card that supports FreeSync is
y
necessary.
Supported Interface: HDMI
y
For more information, refer to AMD website at http://www.amd.com/
y
FreeSync
On FreeSync function on.
Off FreeSync function off.
Color Adjust Gamma The higher the gamma value, the darker the image becomes. Likewise, the
Color Temp Selects the factory default picture color.
Six Color Meets the user requirements for colors through adjusting the color and
Reset Returns the color settings to the default settings.
lower the gamma value, the lighter the image becomes. If you do not need
to adjust the gamma settings, select Off.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom
Red
Green
Blue
saturation of the six colors(Red_Hue, Red_Saturation, Green_Hue,
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yellow_Saturation) and saving the settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the value,
the more saturated and dark the colors become.
You can customize the picture color using Red, Green, and
Blue colors.
-General
To view the OSD menu, press the joystick button at the bot-
1
tom of the monitor and then enter the Menu.
General
Go to
2
Configure the options following the instructions that appear in
3
the bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
5
you exit.
by moving the joystick.
21
ENGLISH
Each option is described below.
Menu > General Description
Language To choose the language in which the control names are displayed.
SMART ENERGY
SAVING
Power LED Turns the power indicator on the front side of the monitor on/off.
Automatic Standby The monitor will automatically switch to standby mode after a certain period.
OSD Lock Prevents incorrect key input.
High
Low
Off Disables SMART ENERGY SAVING .
On The power indicator is automatically turned on.
Off The power indicator is automatically turned off.
On Key input is disabled.
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input,
and General are disabled.
Off Key input is enabled.
NOTE
SMART ENERGY SAVING: Conserve energy by using luminance compensation algorithm.
y
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If op-
y
tion of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
ENGLISH
22
-Reset
To view the OSD menu, press the joystick button at the bot-
1
tom of the monitor and then enter the Menu.
Reset
Go to
2
Configure the options following the instructions that appear in
3
the bottom right corner.
To return to the upper menu or set other menu items, move the
4
joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄ until
5
you exit.
by moving the joystick.
Each option is described below.
Menu > Reset Description
Do you want to reset your settings?
Reset Returns to the default settings.
Cancel Cancel the select.
-Picture Mode
Press the joystick button on the bottom of the monitor.
1
Go to Picture mode by moving the joystick button to ▲.
2
Configure the options following the instructions that appear in the bot-
3
tom.
23
ENGLISH
Each option is described below.
Menu > Picture
Mode
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be ad-
Reader It is a mode that the screen is adjusted to the best for the newspaper. If you want
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
FPS 1 This mode is optimized for FPS games.
FPS 2 It has a higher Black Stabilizer value than FPS Game 1. It is suitable for very dark FPS games.
RTS This mode is optimized for RTS Game.
Custom
(Game)
justed.
screen more bright, you can control brightness in Menu OSD.
In this mode, users can customize various elements including game-related options.
Description
24
ENGLISH
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Is the power LED on?
Is the power on and the power LED
displaying white?
Is the power LED blinking?
Is the OUT OF RANGE message being
displayed?
Is the No Signal message being displayed?
The OSD lock message is being displayed.
Are some functions not avail-able when you
press the Menu button?
The screen retains an image.
Does image sticking occur even when the
monitor is turned off?
Check if the power cord is correctly plugged into the power outlet.
y
Check the power cable connection and press the power button.
y
Check that the connected input is enabled (Menu > Quick Settings > Input).
y
If the monitor is in sleep mode, move the mouse, or press any key on the
y
keyboard, to switch the display on.
Check if the computer is turned on.
y
This occurs when signals transferred from the PC (graphics card) are out of the
y
horizontal or vertical frequency range of the monitor. Please see the Product
Specification section of this manual to set the appropriate frequency.
This is displayed when the signal cable between the PC and the monitor is
y
missing or disconnected. Check the cable and reconnect it.
The OSD is locked. Go to Menu > General and set OSD Lock to Off.
y
Displaying a still image for a prolonged time may cause damage to the screen,
y
resulting in the retention of the image.
To extend the lifetime of the monitor, use a screensaver.
y
Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may
y
be flickering. Change the resolution to 1080P or the recommended resolution.
NOTE
Vertical frequency In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The
y
number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz.
Horizontal frequency The time it takes to display one horizontal line is called the horizontal cycle. If 1 is divided by the horizontal interval,
y
the result is the number of horizontal lines displayed per second. This is called horizontal frequency and is represented by kHz.
NOTE
Check if the graphics card's resolution or frequency is within the range allowed by the monitor and set it to the
y
recommended (optimal) resolution in Control Panel > Display > settings.
Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a
y
truncated display area, or misalignment of the display.
The setting methods may be different depending on the computer or operating system, and some resolutions may not be
y
available depending on the performance of the graphics card. If this is the case, contact the manufacturer of the computer
or graphics card for assistance.
Some graphics cards may not support 2560 × 1080 resolution. If the resolution cannot be displayed, contact the
y
manufacturer of your graphics card.
The display color is discoloured.
Does the display appear discoloured (16
colors)?
Does the display color appear unstable or
monochrome?
Are there spots on the screen?
Set the color to 24 bit (true color) or higher. In Windows, go to control
y
Panel > Display > Settings > Color Quality.
Check if the signal cable is connected properly. Reconnect the cable or reinsert
y
the PC's graphics card.
When using the monitor, pixilated spots (red, green, blue, white, or black) may
y
appear on the screen. This is normal for an LCD screen. It is not an error, nor is it
related to the monitor's performance.
25
ENGLISH
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
Be sure to install the display driver from our web site: http://www.lg.com.
y
Make sure to check if the video card supports Plug&Play function.
y
26
ENGLISH
SPECIFICATIONS
34UM59 34UM59B 34UM59R
Type TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Pixel Pitch 0.312 mm x 0.310 mm
Resolution Maximum Resolution 2560 × 1080 @ 60 Hz
Recommended Resolution 2560 × 1080 @ 60 Hz
Video Signal
Input Connector HDMI IN1, HDMI IN2, H/P
Power Voltage 19 V 2.0 A
AC/DC adaptor Type ADS-45SN-19-3 19040G, SHENZHEN HONOR ELECTRONIC production
Environmental Conditions
Stand Angle Adjustment
Dimension Monitor Size (Width x Depth x Height)
Weight (Without
Packaging)
Horizontal Frequency 30 kHz to 90 kHz
Vertical Frequency 56 Hz to 75 Hz
Power consumption (Typ.) On mode: 27.3 W Typ. ( ENERGY STAR® standard ) *
34.6 W Typ. ( Outgoing condition ) **
Sleep Mode ≤ 0.5 W
Off Mode ≤ 0.3 W
Or type LCAP21C, LIEN CHANG ELECTRONIC ENTERPRISE production
Or type LCAP26B-E, LIEN CHANG ELECTRONIC ENTERPRISE production
Output: 19 V 2.1 A
Operating Conditions
Storing Condition
Forwards/Backwards: -5° to 15° (Head)
With Stand 828.5 mm x 222.4 mm x 460.2 mm
Without Stand 828.5 mm x 41.5 mm x 370.2 mm
With Stand 7.1 kg
Without Stand 6.1 kg
Temperature 0 °C to 40 °C
Humidity Less than 80 %
Temperature -20 °C to 60 °C
Humidity Less than 85 %
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
**The On mode power consumption is measured with LGE test standard(Full White pattern,Maximumresolution).
27
Factory Support Mode (Preset Mode, PC)
HDMI
Preset Mode
720 x 400 31.468 70.08 -/+
640 x 480 31.469 59.94 -/-
640 x 480 37.5 75 -/-
800 x 600 37.879 60.317 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.123 75.029 +/+
1152 x 864 67.5 75 +/+
1280 x 720 45 60 +/+
1280 x 1024 63.981 60.02 +/+
1280 x 1024 79.976 75.025 +/+
1600 x 900 60 60 +/+
1680 x 1050 65.290 59.954 -/+
1920 x 1080 67.5 60 +/-
2560 x 1080 66.7 60 -/+
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
ENGLISH
Polarity (H/V) Remarks
HDMI Timing (Video)
Preset Mode
480P 31.50 60
576P 31.25 50
720P 37.50 50
720P 45.00 60
1080P 56.25 50
1080P 67.50 60
Horizontal
Frequency (kHz)
Power Indicator
Mode LED Color
On Mode Light On
Power-saving Blinking
Off Mode Off
Vertical Frequency
(Hz)
Remarks
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.In
addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.LG Electronics will also provide open source
code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years
from the date on which you purchased the product.
The model and serial number of the product are located on
the back and on one side of the product.
Record them below in case you ever need service.
MODEL
SERIAL
ENERGY STAR® is a set of power-saving guidelines issued
by the U.S.Environmental Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U. S. A., Inc. has
determi ned that this produ ct meets the ENERG Y
STAR® guidelines for energy efficiency.
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®
program.
Loading...