LG 32MN58HM-P Owner’s Manual

Printing specification

	Drawn	Checked	Approved
Signature	JIYOUNG CHOI	MIRA WOO	JONGOK KIM
MMM/DD/YYYY	May/31/2016	May/31/2016	May/31/2016

1. Model Description

Model name	:	32MN58HM-PN	Brand name	:	LG	Part number	:	MFL69560305
Suffix	:	PD	Product name	:	Monitor TV	(Revision number)		(1708-REV03)

2. Printing Specification

1.		Trim size (Format)	:	148 mm x 210 mm (A5)
2.		Printing colors
		• Cover	:	1 Color (Black)
		• Inside	:	1 Color (Black)
3.		Stock (Paper)
		• Cover	:	Uncoated, wood-free paper 60 g/
		• Inside	:	Uncoated, wood-free paper 60 g/
4.		Bindery	:	Saddle stitching
5.		Language	:	ENG / TUR (2)
6.		Number of pages	:	72
		“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N		Details should be followed Eco-SCM management standard[LG(56)-A-2524].
O		Especially, Part should be followed and controlled the following specification.
T
E		(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
		(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3. Origin Notification

LGEAK	:	Printed in Kazakhstan	LGEKR	:	Printed in Korea	LGERS	:	Printed in Mexico
LGEAZ	:	Printed in Brazil	LGEMA	:	Printed in Poland	LGESY	:	Printed in China
LGEEG	:	Printed in Egypt	LGEMX	:	Printed in Mexico	LGETH	:	Printed in Thailand
LGEIL	:	Printed in India	LGEND	:	Printed in China	LGEVN	:	Printed in Vietnam
LGEIN	:	Printed in Indonesia	LGERA	:	Printed in Russia			Made by LG Electronics (Only TW Suffix)
LGEAS	:	Printed in Algeria				LGEWR :		Printed in Poland

4. Changes

10
9
8
7
6
5
4
3	Aug/10/2017	JIWON BANG	EKMH800041	To change VESA bracket model to LSW140B. (ECR No.R176000144)
2	Jun/07/2017	JIWON BANG	EKMH600119	To change VESA bracket model.
1	Jul/18/2016	JIYOUNG CHOI	EKMG700326	Changed the manual for Pre-MP.
Rev. Number	MMM/DD/YYYY	Signature	ECO Number	Change Contents

Pagination sheet

Front											Back
(ENG)											Cover
P/No.		2	…		…	…		22	Blank		(ENG)
Front											Back
(TUR)											Cover
		2	…		…	45		Blank	Blank		(TUR)

OWNER’S MANUAL

Safety and Reference

LED MONITOR*

*LG LED Monitors are

LCD Monitors with LED Backlighting.

Please read this manual carefully before operating your set and retain it for future reference.

32MN58HM

*MFL69560305*	www.lg.com
	P/NO : MFL69560305(1708-REV03)
	Copyright 2017 LG Electronics Inc. All Rights Reserved.

Table of contents

<![if ! IE]>

<![endif]>ENGLISH

3	Safety precautions
5	Licenses
5	Open Source Software Notice Information
6	Preparing
6	Moving and lifting the monitor
7	Installing the monitor
7	Using the joystick button
7	Mounting on a table
9	Mounting on a wall
10	Connections (Notifications)
10	Remote control
12	Settings
15	Customizing setting
18	Maintenance
18	Troubleshooting
19	Specifications
21	Service
21	Environmental information
22	Product Fiche

2

Safety precautions

Please read these safety precautions carefully before using the product.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

Precautions in installing the product

WARNING

••Keep away from heat sources like electrical heaters. ►►Electrical shock, fire, malfunction or deformation may occur.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children.

►►Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••Do not put heavy objects on the product or sit upon it.

►►If the product collapses or is dropped, you may be injured. Children must pay particular attention.

••Do not leave the power or signal cable unattended on the pathway.

►►The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

••Install the product in a neat and dry place.

►►Dust or moisture can cause electrical shock, fire or product damage.

••If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.

►►If you continue to use without taking proper measures, electrical shock or fire can occur.

••If you dropped the product or the case is broken, turn off the product and unplug the power cord.

►►If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.

••Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.

►►It can cause injury to human, problem to product and damage the display.

••Do not let the product fall or drop when connecting it with an external device.

►►This may cause injury and/or damage to the product.

••When connecting it with a game device, keep a distance of four times as long as the diagonal measurement of the screen from the device.

►►If the product falls because of the short cable, this may cause injury and/or damage to the product.

••Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered by the warranty on this product.

••Do NOT install this product on a wall where there is high risk of exposure to oil fumes or mist.

►►This may damage product and cause is to fail.

CAUTION

••Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place. (more than 100 mm from the wall)

►►If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.

••Do not block the ventilation hole of the product by a tablecloth or curtain.

►►The product can be deformed or fire can break out due to overheating inside the product.

••Install the product on a flat and stable place that has no risk of dropping the product.

►►If the product is dropped, you may be injured or the product may be broken.

••Install the product where no EMI occurs.

••Keep the product away from direct sunlight. ►►The product can be damaged.

••If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product's picture quality, life cycle and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.

••Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside and avoid placing on cushions or carpets.

••In addition, do not install it where there are heating objects such as lighting equipment.

Precautions to the AC adapter and electrical power

WARNING

••If water or any foreign substance goes inside the product (monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center.

►►Otherwise, this may cause a fire or electric shock due to damage to the product.

••Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry them before use. ►►Otherwise, this may cause a fire or electric shock.

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

••Make sure to completely insert the power cord into the AC adapter. ►►If loosely connected, the poor connection may cause a fire or

electric shock.

••Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.

►►The use of non-approved products may cause a fire or electric shock.

••When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force.

►►The power line can be damaged, which may cause electric shock or fire.

••Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects. ►►Damaged power cords may cause a fire or electric shock.

••Never disassemble, repair or modify the power cord or AC adapter. ►►This may cause a fire or electric shock.

••Make sure to connect the power cable to the grounded current. ►►You may be electrocuted or injured.

••Use the rated voltage only.

►►The product can be damaged, or you may be electrocuted.

••In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.

►►It can cause electric shock.

••Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a

grounding terminal designed for exclusive use with the computer. ►►A fire can break out due to overheating.

••Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

►►You may be electrocuted due to excess moisture.

••If you don't intend to use the product for a long time, unplug the power cable from the product.

►►Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

••Fix the power cable completely.

►►If the power cable is not fixed completely, a fire can break out.

••Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

►►You may be electrocuted.

••The appliance coupler is used as the disconnect device.

••Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

CAUTION

••Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.

►►This may cause a fire.

••Do not unplug the power cord while the product is in use. ►►Electrical shock can damage the product.

••Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

Precautions in moving the product

WARNING

••Make sure to turn off the product.

►►You may be electrocuted or the product can be damaged.

••Make sure to remove all cables before moving the product. ►►You may be electrocuted or the product can be damaged.

••Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.

••Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.

CAUTION

••Do not shock the product when moving it.

►►You may be electrocuted or the product can be damaged.

••Do not dispose the product-packing box. Use it when you move.

Precautions in using the product

WARNING

••Do not disassemble, repair or modify the product at your own discretion.

►►Fire or electric shock accident can occur.

►►Contact the service center for check, calibration or repair.

••When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

••Keep the product away from water. ►►Fire or electric shock accident can occur.

••Do not shock or scratch the front and sides of the screen with metallic objects.

►►Otherwise, it may cause damage to the screen.

••Avoid high temperatures and humidity.

CAUTION

••Do not put or store inflammable substances near the product. ►►There is a danger of explosion or fire due to careless handling of

the inflammable substances.

••When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

4

••Take a rest from time to time to protect your vision.

••Keep the product clean at all times.

••Take a comfortable and natural position when working with a product to relax the muscles.

••Take a regular break when working with a product for a long time.

••Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.

••Keep the proper distance from the product.

►►Your vision may be impaired if you look at the product too closely.

••Set the appropriate resolution and clock by referring to the User’s Guide.

►►Your vision can be impaired.

••Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)

►►Product can be deformed.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus(e.g. on shelves above the unit).

••Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace and electric heaters.

••Do NOT place non-rechargeable batteries in charging device.

••Using headsets (earphones) for a long time or listening loudly can cause damage to your hearing.

••Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.

••Do not use products using high voltage around the Monitor. (ex. Electrical Swatter)

►►Monitor may have malfunction as its electrical shock.

Mounting on a wall

••Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact Service personnel authorised by Manufacturer.

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

<![if ! IE]>

<![endif]>ENGLISH

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, first register your device at vod. divx. com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p,including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at [www.divx.com/ patents]

Open source software notice information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

5

<![if ! IE]>

<![endif]>ENGLISH

Preparing

NOTE

••Image shown may differ from your monitor.

••The items supplied with your product may vary depending on the model.

••Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.

••Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.

••The available menus and options may differ from the input source or product model that you are using.

••New features may be added to this monitor in the future.

••For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your monitor’s USB port.

B	B

A A

*A10 mm *B18 mm

••Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

••Recommended HDMI cable types -- High-Speed HDMI®/™ cable

-- High-Speed HDMI®/™ cable with Ethernet

CAUTION

••Always use genuine components to ensure safety and product performance.

••The product warranty will not cover damage or injury caused by the use of unauthorized components.

Moving and lifting the monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

••It is advisable to place the monitor in the original box or packing material before attempting to move it.

••Before moving or lifting the monitor, disconnect the power cord and all cables.

••Hold the top and bottom of the monitor frame firmly. Do not hold the panel itself.

••When holding the monitor, the screen should face away from you to prevent it from being scratched.

••When transporting the monitor, do not expose the monitor to jolts or excessive vibration.

••When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

CAUTION

••Image shown may differ from your monitor.

••Avoid touching the monitor screen as much as possible. Do not apply pressure.

-This may result in damage to the screen or some of the pixels used to create images.

••Do not carry the monitor upside-down by holding the stand body (or stand base) as this may cause it to fall off, resulting in damage or injury.

••When handling the monitor, be careful not to damage the protruding joystick button.

6

Installing the monitor

CAUTION

••When attaching the stand to the monitor set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

••Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.

••If you use the monitor panel without the stand base, its joystick button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

NOTE

•• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in reverse.

••To protect the screen from scratches, cover the surface with a soft cloth.

Using the joystick button

You can simply operate the monitor functions, pressing or moving the joystick button up, down, left or right.

Joystick Button

Basic functions

		When the monitor is turned off,
	Power on	place your finger on the joystick
		button and press it once and
		release it.
		When the monitor is turned on,
		place your finger on the joystick
	Power off	button, press it once for a few
		seconds and release it. (However, if
		the menu button is on the screen,
		pressing and holding the joystick
		button will let you exit the menu.)
		If you place your finger over the
	Volume	joystick button and move it left or
	control	right, you can adjust the volume
		level you want.
	Menu	If you place your finger over the
		joystick button and move it up or
	control
		down, you can change the menu.

CAUTION

••When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button.

Adjusting the menu

When the monitor is turned on, press the joystick button one time. You can adjust the menu items moving the joystick button up, down, left, or right.

Turns the power off.

Accesses the main menu.

Clears on-screen displays and returns to monitor viewing.

Changes the input source.

Mounting on a table

••Image shown may differ from your monitor.

1Lift the monitor and place it on the table in an upright position.

-Place at least 100 mm away from the wall to ensure sufficient ventilation.

	100 mm
100 mm	100 mm
	100 mm

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

CAUTION

••Do not place the monitor near or on sources of heat, as this may result in fire or other damage.

••To avoid the risk of electric shock, disconnect the Power Cord before moving or installing the monitor.

<![if ! IE]>

<![endif]>ENGLISH

7

<![if ! IE]>

<![endif]>ENGLISH

Adjusting the angle of the monitor to suit view

••Image shown may differ from your monitor.

Tilt from -5° to 10° degrees up or down to adjust the angle of the monitor to suit your view.

-5° 10°

2As shown in the figure, use a flat tool to remove the cover. Example: Slot (-) type screwdriver

Front Rear

CAUTION

••When you adjust the angle, do not hold the buttom of the monitor frame as shown on the following illustration, as may injure your fingers.

3 Remove the screws and detach the stand bracket.

Installing the wall mounting bracket support

As shown below, detach the stand bracket before installing the wall mounting bracket support.

1 Lay the monitor down on a flat surface with the panel facing down. Before that, lay down a soft cloth or a cushion first so as to prevent damage to the panel.

						Back
Stand
bracket
								Cover

8

Using the kensington security system

(This is not available for all models.)

••Image shown may differ from your monitor.

The Kensington security system connector is located at the rear of the monitor. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the monitor and a table.

NOTE

••The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

Mounting on a wall

Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.

100 mm

100 mm	100 mm

100 mm

To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

1If you use screws longer than the standard length, it may damage the inside of the product.

2A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents relating to the use of non-standard screws.

Model						32MN58HM
Wall Mount				A
(A x B)	B					200 x 100
Standard screw						M4 x L10
Number of screws						4
Wall mount bracket						LSW140B
(optional)

CAUTION

••Disconnect the power cord first, and then move or install the monitor. Otherwise electric shock may occur.

••If you install the monitor on a ceiling or slanted wall, it may fall and result in severe injury.

••Use an authorized LG wall mount and contact the local dealer or qualified personnel.

••Do not over tighten the screws as this may cause damage to the monitor and void your warranty.

••Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

••Screw length from outer surface of back cover should be under 8 mm.

NOTE

••Use the screws that are listed on the VESA standard screw specifications.

••The wall mount kit includes an installation manual and necessary parts.

••The wall mount bracket is not provided. You can obtain additional accessories from your local dealer.

••The length of screws may differ depending on the wall mount. Make sure to use the proper length.

••For more information, refer to the manual supplied with the wall mount.

<![if ! IE]>

<![endif]>ENGLISH

9

<![if ! IE]>

<![endif]>ENGLISH

Connections (Notifications)

Connect various external devices to the monitor and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

NOTE

••For the best picture quality, connect the external device and the monitor with the HDMI cable.

••The monitor may flicker when turned on in an area where the temperature is low. This is normal.

••Sometimes red, green, or blue spots may appear on the screen. This is normal.

••Do not press the screen for a prolonged time. This may cause image distortion.

••Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible.

••The external device connection may differ from the model.

Connecting to a PC

NOTE

••If you want to use HDMI-PC mode, you must set the Input Label to PC mode.

••The setting can be changed in SETTINGS OPTION Input Label.

Other connections

Some separate cable is not provided.

For the best picture and audio quality, connect the external device and the monitor with the HDMI cable.

••USB port supports 0.5 A electric current. If you need more electric current in case of HDD, use the separate power adaptor.

Remote control

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the monitor correctly. To replace batteries, open the battery cover, replace batteries

(1.5 V AAA) matching the andends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

••Do not mix old and new batteries, as this may damage the remote control.

••This remote uses infrared light. When in use, it should be pointed in the direction of the monitor’s remote sensor.

A

B

A

(Power) Turn the power on or off.

Resizes an image.

Changes the input source.

B

Adjusts the volume level.

Select the desired contents file in the USB device.

Mutes all sounds.

Moves to the previous or next screen.

10

C

<![if ! IE]>

<![endif]>ENGLISH

D

C

Changes the image mode.

Check the current input information.

Changes the sound mode. (Depending on model) Accesses the main menu.

Accesses the quick menus.

Navigation buttons (up/down/left/right) Scrolls through menus or options.

Selects menus or options and confirms your input.

Returns to the previous screen.

Clears all on-screen displays and returns to monitor viewing.

D

Control buttons ()

Coloured buttons These access special functions in some menus. ( : Red, : Green, : Yellow, : Blue)

(Backlight) Adjusts the brightness of the screen by controlling the screen backlight.

11

<![if ! IE]>

<![endif]>ENGLISH

Settings

Adjusting aspect ratio

Resize an image to view at its optimal size by pressing Q.MENU or accessing Aspect Ratio in the PICTURE menu.

NOTE

••The available ratio varies depending on the input source.

••If you select Just Scan, you may see image noises at the edge of the original signal.

••If you enlarge or reduce an image, the image may be distorted.

Selecting an input source

1Press INPUT to access the input sources. The connected device displays on each input source.

2Press the Navigation buttons or INPUT button to scroll to one of the input sources and press OK .

Entertainment

(Depending on model)

Setting USB AutoRun

SETTINGS OPTION USB AutoRun

Play photos or videos of USB automatically when monitor is turned on or USB is connected.

••Off : Turn off the USB AutoRun.

••Movie : Play videos of USB automatically.

••Photo : Play photos of USB automatically.

••Only plays the files in the top level folder of the USB device in sequence.

••While playing, press the BACK or EXIT button on the remote control to end this function.

••If the files are invalid or corrupted, the following message appears before returning to the previous input status: “This file is invalid.”

••When the USB device is reconnected after being disconnected during video playback, Continue watching starts automatically and resumes the video from the last viewed scene (only applies to the first video).

Connecting USB storage devices

CAUTION

••Do not turn the monitor off or remove a USB storage device while the USB storage device is connected to the monitor, as this could result in loss of files or damage to the USB storage device.

••Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the manufacturer’s warranty.

Connect USB storage devices (USB memory) to the monitor and use multimedia features. Connect a USB flash memory or USB memory card reader to the monitor. To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the monitor or files.

1Press Q.MENU to access the quick menus.

2Press the Navigation buttons to scroll to Eject and press

OK .

3Disconnect the USB storage device only when the message says that it is safe to remove.

Tips for using USB storage devices

••Only a USB storage device is recognizable.

••If the USB storage device is connected through a USB hub, the device is not recognizable.

••A USB storage device using an automatic recognition programme may not be recognized.

••A USB storage device which uses its own driver may not be recognized.

••The recognition speed of a USB storage device may depend on each device.

••Please do not turn off the monitor or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

••Please do not connect the USB storage device which was artificially manoeuvred on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files.

••Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system.

••Please connect a USB storage device with the cable offered by the device maker.

••Some USB storage devices may not be supported or operated smoothly.

••Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss.

••If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.

••If the USB memory device does not work properly, disconnect and reconnect it.

••How fast a USB memory device is detected differs from device to device.

••The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.

••Any device with more than the recommended capacity may not work properly.

••USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.

••Maximum of 999 folders or files can be recognized under one folder.

••If there are a lot of folders or files all within one folder, the device may not be able to access these properly.

••For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 0.5 A.

12

Supported file format

Type	Supported file format
Photo	JPEG
	Available size
	Baseline :
	64 pixel (W) x 64 pixel (H)
	- 15360 pixel (W) x 8640 pixel (H)
	Progressive : 64 x 64 to 1024 x 768
	••You can play JPEG files only.
	••Non-supported files are displayed in the form of
	predefined icon.
Music	MP3
	Bit rate : 32 kbps to 320 kbps
	••Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz,
	48 kHz
	••Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz,
	24 kHz
	••Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz,
	12 kHz
Movie	DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,TRP,TP,ASF,
	WMV,FLV,RM,RMVB
	Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/
	*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/
	*.flv/*.avi(motion-jpeg)/*.mp4(motion-jpeg)/
	*.mkv(motion-jpeg)/*.rm/*.rmvb) supporting file
	Video format : DivX 3.11, DivX4, DivX5, DivX6,
	Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
	beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/
	AVC, VC1, JPEG, Sorenson H.263
	Audio format : Dolby Digital, Mpeg, MP3, LPCM,
	ADPCM, WMA, AAC
	Bit rate : within 32 kbps to 320 kbps(MP3)
	External Subtitle format : *.smi/*.srt/
	*.sub(MicroDVD, Subviewer1.0/2.0)/*.ass/*.ssa/
	*.txt(TMPlayer)/*.psb(PowerDivX)
	Internal Subtitle format : only, XSUB (It is the
	subtitle format used in DivX6 files.)

Viewing photos

View image files saved in a USB storage device. The displays on the screen may differ from the model.

NOTE

•• Non-supported files are displayed the preview image by icon only.

••Abnormal files are displayed in the form of bitmap .

••Slideshow : Starts or stops a slideshow with selected photos. If there are no selected photos, all photos saved in the current

folder display during a slideshow. To set a slideshow speed, select

Option.

••BGM : Turns the background music on or off. To set the background music folder, select Option.

(Rotate) : Rotates photos clockwise (90°, 180°, 270°, 360°). -- The supported photo size is limited. You cannot rotate a photo if

the resolution of the rotated width is larger than the supported resolution size.

••Hide : Hides the option window. To display the options, press

OK .

Q.MENU options for photo list

1Press Q.MENU. A pop-up window will appears.

2Press the Navigation buttons to scroll to Set photo view. and press OK .

3Press the Navigation buttons to scroll to one of the following options and press OK .

Set photo view.

••Slide Speed : Selects a slideshow speed (Fast, Normal, Slow).

••Music Folder : Selects a music folder for the background music.

Set video.

Allows you to change video presets.

Set audio. (Depending on model)

Allows you to change audio presets.

Listening to music

1Press SETTINGS to access the main menus.

2Press the Navigation buttons to scroll to ENTERTAINMENT and press OK .

3Press the Navigation buttons to scroll to MUSIC LIST and press OK .

4Press the Navigation buttons to scroll to a folder/file you want and press OK .

5Play music by using the following menus/buttons.

<![if ! IE]>

<![endif]>ENGLISH

13

<![if ! IE]>

<![endif]>ENGLISH

Q.MENU options for music list

Press Q.MENU. A pop-up window will appears.

Set audio. (Depending on model)

Allows you to change Audio presets.

NOTE

••The monitor will not play copy protected files.

••If the monitor is not in use for some time during playback, the information box as a screensaver will appear to prevent image burn. To return to the MUSIC LIST screen, press OKor

BACK.

Viewing movies

1Press SETTINGS to access the main menus.

2Press the Navigation buttons to scroll to ENTERTAINMENT and press OK .

3Press the Navigation buttons to scroll to MOVIE LIST and press OK .

4Press the Navigation buttons to scroll to a folder/file you want and press OK .

5Play movie by using the following menus/buttons.

Tips for using playing video files

••Some user-created subtitles may not work properly.

••Some special characters are not supported in subtitles.

••HTML tags are not supported in subtitles.

••Subtitles in languages other than the supported languages are not available.

••Changing font and colour in subtitles is not supported.

••Subtitles in languages other than one specified are not supported.

••Video files with subtitle files of 1 MB or larger may not be played properly.

••The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.

••A damaged movie file may not be played correctly, or some player functions may not be usable.

••Movie files produced with some encoders may not be played correctly.

••If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.

••HD videos with a maximum of 1920 x 1080 @ 25/30p or 1280 x 720 @ 50/60p are supported, depending on the frame.

••Videos with resolutions higher than 1920 x 1080 @ 25/30p or 1280 x 720 @ 50/60p may not work properly depending on the frame.

••Movie files other than the specified types and formats may not work properly.

••Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps)

••We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.

••DTS Audio codec is not supported.

••A movie file more than 30 GB in file size is not supported for playback. The file size limit is dependent on the encoding environment.

••A DivX movie file and its subtitle file must be located in the same folder.

••A video file name and its subtitle file name must be identical for it to be displayed.

••Playing a video via a USB connection that doesn’t support high speed may not work properly.

••Files encoded with GMC (Global Motion Compensation) and Qpel (Quarterpel Motion Estimation) may not be played.

••Trick Mode does not support other functions than if video files do not have index information.

••Video file names that contain special characters may not be playable.

Video options

1Press Q.MENU to access the pop-up menus.

2Press the Navigation buttons to scroll to Set video play.,

Set video. or Set audio. (Depending on model) and press

OK .

When you select the Set video play.

1Press the Navigation buttons to scroll to show the Picture Size, Audio Language, Subtitle.

2Press the Navigation buttons to scroll to make appropriate adjustments.

Menu	Description
Picture Size	Selects your desired picture format during
	movie play.
Audio Language	Changes the Language Group of the audio
	during movie play. Files with a single audio
	track cannot be selected.
Subtitle	Turn on/off the subtitle.
Language	Activated for SMI subtitle and can select the
	language within the subtitle.
Code Page	Can select the font for subtitle. When set
	to default, same font as general menu will
	be used.
Sync	Adjusts the time synchronisation of the
	subtitle from -10 secs to +10 secs by steps of
	0.5 secs during movie play.

NOTE

••Only 10,000 of sync blocks can be supported within the subtitle file.

••When playing a video, you can adjust the Picture Size by pressing

Q.MENU or accessing Aspect Ratio in the PICTURE menu.

When you select the Set video.

Press the Navigation buttons to scroll to make appropriate adjustments.

14

When you select the Set audio.

(Depending on model)

1Press the Navigation buttons to scroll to show the Sound Mode, Auto Volume, Balance.

2Press the Navigation buttons to scroll to make appropriate adjustments.

DivX® VOD Guide

DivX® VOD Registration

In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod.

1Press SETTINGS to access the main menus.

2Press the Navigation buttons to scroll to ENTERTAINMENT and press OK .

3Press the Navigation buttons to scroll to DivX(R) VOD and press OK .

4Press the Navigation buttons to scroll to Registration and press OK .

5View the registration code of your monitor.

6When you are finished, press EXIT. When you return to the previous menu, pressBACK.

NOTE

••Movie files are supported as follows.

••Resolution : under 1920 x 1080 (W x H) pixels

••Frame rate : under 30 frames/sec

••Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX4, DivX5, DivX6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson H.263/H.264.

DivX® VOD Deregistration

You should deregister your device with 8 digit DivX deregistration code from your device at www.divx.com/vod.

1Press SETTINGS to access the main menus.

2Press the Navigation buttons to scroll to ENTERTAINMENT and press OK .

3Press the Navigation buttons to scroll to DivX(R) VOD and press OK .

4Press the Navigation buttons to scroll to Deregistration and press OK .

5Press the Navigation buttons to select Yes to confirm.

6When you are finished, press EXIT. When you return to the previous menu, pressBACK.

NOTE

••Once the deregistration is executed, you must register your device again to see DivX® VOD contents.

Customizing setting

PICTURE Settings

NOTE

••Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.

SETTINGS PICTURE Aspect Ratio

Changes the image size to view images at its optimal size.

SETTINGS PICTURE Energy Saving

Reduces the power consumption by adjusting the screen brightness.

••Off : The Energy Saving is off.

••Minimum/Medium/Maximum : Selects the brightness level. off : The screen turns off in 3 seconds.

NOTE

••When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start.

••If you adjust “Energy Saving Maximum”, Backlight feature will not work.

SETTINGS PICTURE Picture Mode

Selects one of the preset image or customizes options in each mode for the best monitor screen performance. You are also able to customize advanced options of each mode.

••Vivid : Adjusts the video image for the retail environment by enhancing the contrast, brightness, colour, and sharpness.

••Standard : Adjusts the image for the normal environment.

••Cinema : Optimizes the video images for a cinematic look to enjoy movies as if you are in a movie theatre.

••Soccer / Sport : [Depending on model] Optimizes the video image for high and dynamic actions by emphasizing primary colours such as white, grass, or sky blue.

••Game : Optimizes the video image for a fast gaming screen such as PCs or games.

SETTINGS PICTURE Eye Comfort Mode

If you turn this option on, color temperature will be automatically adjusted to reduce eye strain.

••On : Automatically adjusts the screen color temperature.

••Off : Turns off the Eye Comfort Mode. SETTINGS PICTURE Screen(RGB-PC)

••Customizes the PC display options in RGB mode.

••Resolution : Sets the desired resolution. Options may only be selected when the PC resolution is set to 1024 x 768 @ 60/ 1280 x 768 @ 60/1360 x 768 @ 60/ 1366 x 768 @ 60 (default).

••Auto config. : Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress.

••Position/Size/Phase : Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration.

••Reset : Restores the options to the default setting.

<![if ! IE]>

<![endif]>ENGLISH

15

<![if ! IE]>

<![endif]>ENGLISH

Basic image options

••Backlight : Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced

without any video signal loss.

••Contrast : Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is

saturated.

••Brightness : Adjusts the base level of the signal in the picture.

••Sharpness : Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.

••Colour : Adjusts intensity of all colours.

••Tint : Adjusts the balance between red and green levels.

••Colour Temperature : Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. You can

control red, green, blue to adjust colour details.

••Advanced Control : Customizes the advanced options.

••Reset : Restores the options of each mode to the factory default.

Advanced image options

(Depending on model)

••Dynamic Contrast : Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.

••Dynamic Colour : Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue and green white look more vivid.

••Noise Reduction : Reduces screen noise without compromising video quality.

••Gamma : You can adjust brightness of dark area and middle gray level area of the picture.

-- Low : Make the dark and middle gray level areas brighter. -- Medium : Express the original picture level.

-- High : Make the dark and middle gray level area darker.

••Black Level : Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.

••Motion Eye Care : Adjusts screen brightness to prevent eye glare.

••Film Mode : Makes video clips recorded in film look more natural. This feature operates only in 480i / 576i / 1080i / 1080p (24 Hz)

resolution.

••Colour Gamut : Advanced Control Maximizes the utilization of colour to increase colour quality.

-- Standard: Displays standard set of colours. -- Wide: Increase number of colours used.

••Edge Enhancer : Shows clearer and distinctive yet natural edges of the video.

AUDIO Settings (Depending on model)

SETTINGS AUDIO Auto Volume

Activates the Auto Volume feature to keep the volume level consistent.

SETTINGS AUDIO Balance

Adjust balance between the left and right speakers according to your room environment.

SETTINGS AUDIO Sound Mode

Selects one of the preset sound modes or customizes options in each mode.

••Standard : Select when you want standard-quality sound.

••Music : Select when you listen to music.

••Cinema : Select when you watch movies.

••Soccer / Sport : [Depending on model] Select when you watch sports events.

••Game : Select when you play games.

-- Treble : Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher

frequency range.

-- Bass : Controls the softer sounds in the output. When you turn up the bass, it will increase the output to the lower frequency

range.

-- Reset : Resets the sound mode to the default setting.

TIME Settings

SETTINGS TIME Clock

Sets the time.

SETTINGS TIME Off Time/On Time

Sets the time to turn on or off the monitor automatically. To use this function, you should set the current time and date in advance.

NOTE

••If you do not press any button within 2 hours after the monitor turns on by the On Time feature, the monitor enters the standby mode automatically.

••If you set both Off time and On time features to the same time, the Off time feature overrides the On time feature.

SETTINGS TIME Sleep Timer

Sets the length of time until the monitor to turns off. When you turn the monitor off and turn it on again, the Sleep timer feature will be set to off.

SETTINGS TIME Auto Off(On Time)

If On Time is enabled, the monitor will be turned on at the specified time. If you do not operate the monitor for two hours, the monitor will be turned off automatically.

SETTINGS TIME Automatic Standby (Depending on model)

If you do not press any button on the monitor or remote control for a certain period, the monitor will automatically switch to standby

mode.

16

OPTION Settings

SETTINGS OPTION Menu Language

Selects a desired language.

SETTINGS OPTION Input Label

Indicates which device is connected to which input port.

SETTINGS OPTION Factory Reset

Customizes the monitor settings to suit your preference. The initial setup screen will appear when you turn on the monitor for the first time.

••Home Use : Selects it for the Home environment.

••Store Demo : Selects it for the retail environment.

LOCK Settings

SETTINGS LOCK Lock System

Activates or deactivates the lock system.

SETTINGS LOCK Set Password

Changes the 4-digit password. The default PIN is “0 0 0 0”.

SETTINGS LOCK Input Block

Blocks the input sources.

ENTERTAINMENT Settings

SETTINGS ENTERTAINMENT Photo List

View image files(photos) on monitor which are stored on USB device.

SETTINGS ENTERTAINMENT Music List

Play back music files on monitor which are stored on USB device.

SETTINGS ENTERTAINMENT Movie List

Play movie files on monitor which are stored on usb device.

SETTINGS ENTERTAINMENT Game (Depending on model) Play game contents on your monitor.

SETTINGS ENTERTAINMENT DivX(R) VOD

View the registration code of your monitor.

<![if ! IE]>

<![endif]>ENGLISH

17

<![if ! IE]>

<![endif]>ENGLISH

Maintenance

Cleaning your monitor

Clean your monitor regularly to keep the best performance and to extend the product lifespan.

••Make sure to turn the power off and disconnect the power cord and all other cables first.

••When the monitor is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

••Avoid touching the screen at all times, as this may result in damage to the screen.

••Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

••Do not use any chemicals as this may damage the product.

••Do not spray liquid onto the surface. If water enters the monitor, it may result in fire, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

Preventing “Image burn” or “Burn-in” on your monitor screen

••If a fixed image displays on the monitor screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.

••If the aspect ratio of the monitor is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

NOTE

••Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen. Use a screen saver when possible.

••There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

••If using a sound card, adjust PC sound as required.

••DOS mode may not work depending on the video card if you use an HDMI to DVI cable.

Troubleshooting

Cannot control the monitor with the remote control.

••Check the remote control sensor on the product and try again.

••Check if there is any obstacle between the product and the remote control.

••Check if the batteries are still working and properly installed ( to , to ).

No image display and no sound is produced.

••Check if the product is turned on.

••Check if the power cord is connected to a wall outlet.

••Check if there is a problem in the wall outlet by connecting other products.

The monitor turns off suddenly.

••Check the power control settings. The power supply may be interrupted.

••Check if the Automatic Standby(Depending on model) / Sleep Timer / Off Time is activated in the TIME settings.

••If there is no signal while the monitor is on, the monitor will turn off automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), ‘NO SIGNAL’ or ‘Invalid Format’ is displayed.

••Turn the monitor off/on using the remote control.

••Reconnect the HDMI cable.

••Restart the PC with the monitor on.

If monitor is turned off automatically.

••If On Time is enabled, the monitor will be turned on at the specified time. If you do not operate the monitor for two hours, the monitor will be turned off automatically.

••To disable this function, use your remote control to go to

SETTINGSTIMEAuto Off(On Time)Off.

18

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

	Model			32MN58HM
	Dimensions (Width x Height x Depth)		With Stand (mm)	726.6 x 491.9 x 204.8
			Without Stand (mm)	726.6 x 435.9 x 94.1
	Weight		With Stand (kg)	6.5
			Without Stand (kg)	6.0
	Power consumption (Outgoing condition)			45 W
	Power requirement			19 V		2.3 A
				Manufacturer: APD
				Model: DA-48F19
				Manufacturer: Lienchang
	AC/DC Adapter			Model: LCAP35
				Manufacturer: Lite-On
				Model: PA-1650-43, PA-1480-11
				In : AC 100 – 240 V ~ 50/60 Hz
				Out : DC 19 V					2.53 A
		Operating Temperature		0 °C to 40 °C
	Environment condition	Operating Humidity		Less than 80 %
		Storage Temperature		-20 °C to 60 °C
		Storage Humidity		Less than 85 %

<![if ! IE]>

<![endif]>ENGLISH

19

<![if ! IE]>

<![endif]>ENGLISH

RGB (PC) supported mode

	Resolution	Horizontal		Vertical
		Frequency (kHz)		Frequency (Hz)
	640 x 480	31.469		59.940
	800 x 600	37.879		60.317
	1024 x 768	48.363		60.000
	1152 x 864	54.34		60.050
	1280 x 1024	63.981		60.020
	1600 x 900	55.54		60.000
	1680 x 1050	64.674		59.883
		65.290		59.954
	1920 x 1080	67.5		60.000
	HDMI (PC) supported mode

	Resolution	Horizontal	Vertical
		Frequency (kHz)	Frequency (Hz)
	720 x 400	31.468	70.080
	640 x 480	31.469	59.940
		37.500	75.000
	800 x 600	37.879	60.317
		46.875	75.000
		48.363	60.004
	1024 x 768	56.476	70.069
		60.023	75.029
	1152 x 864	67.500	75.000
	1280 x 720	45.000	60.000
	1280 x 800	49.702	59.810
	1280 x 1024	63.981	60.020
		79.976	75.025
	1400 x 1050	65.317	59.978
	1440 x 900	55.935	59.887
	1600 x 900	60.000	60.000
	1680 x 1050	64.674	59.883
		65.290	59.954
	1920 x 1080	67.500	60.000

NOTE

••The optimal display resolution is 1920 x 1080 @ 60 Hz.

••The optimal timing in each mode is vertical frequency 60 Hz.

HDMI supported mode

	Resolution	Horizontal	Vertical
		Frequency (kHz)	Frequency (Hz)
	720 x 480	31.469	59.940
		31.500	60.000
	720 x 576	31.250	50.000
		37.500	50.000
	1280 x 720	44.960	59.940
		45.000	60.000
		33.720	59.940
		33.750	60.000
		28.125	50.000
	1920 x 1080	27.000	24.000
		33.750	30.000
		56.250	50.000
		67.430	59.940
		67.500	60.000

20

Service

Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when :

••The power cord or plug is damaged or frayed.

••Liquid has been spilled into the monitor.

••The monitor has been exposed to rain or water.

••The monitor does not operate normally following the operating instructions. Adjust only those controls that are covered in the operating instructions. An improper adjustment of other controls may result in damage and often requires extensive work by a qualified technician to restore the monitor to normal operation.

••The monitor has been dropped or the cabinet has been damaged.

••The monitor exhibits a distinct change in performance.

••Snapping or popping from the monitor is continuous or frequent while the monitor is operating. It is normal for some monitors to make occasional sounds when being turned on or off, or when changing video modes.

Do not attempt to service the monitor yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Environmental information

Information for environmental preservation

LGE. announced the ‘LG Declaration for a Cleaner Environment’ in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our product.

Information for recycling

This product may contain parts which could be hazardous to the environment. It is important that this product be recycled after use.

LGE. handles all waste product through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want

to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG.

We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our ‘green’ policies. http://www.lg.com/global/sustainability/environment/take-back- recycling.jsp

<![if ! IE]>

<![endif]>ENGLISH

21