LG 32MB25VQ-B User manual
OWNER’S MANUAL
LED MONITOR
Please read the safety information carefully before using the product.
LED MONITOR MODEL
32MB25VQ
*MFL68300302* |
www.lg.com |
P/NO : MFL68300302(1403-REV00) / Printed in Korea
<![endif]>ENGLISH
2Table of Contents
TABLE OF CONTENTS
3 |
IMPORTANT PRECAUTIONS |
|
17 |
USER SETTINGS |
|
3 |
On Safety |
17 |
Activating the Main Menu |
||
3 |
- Do not Open the Display: |
17 |
- Main Menu Features |
||
3 |
- To Avoid Personal Injury : |
18 |
Customizing Settings |
||
3 |
- To Prevent Fire or Hazards: |
18 |
- Menu Settings |
||
4 |
On Installation |
19 |
-Picture |
||
5 |
On Cleaning |
20 |
-Color |
||
5 |
On Repacking |
21 |
-Display |
||
5 |
On Disposal(Only, LCD Monitor with Hg |
21 |
-Volume |
||
|
lamp) |
22 |
-Others |
||
|
|
23 |
Reader Setting |
||
6 |
LICENSE |
|
24 |
TROUBLESHOOTING |
|
7 |
ASSEMBLING AND PREPAR- |
||||
|
26 |
|
|||
|
ING |
SPECIFICATIONS |
|||
7 |
Product Components |
27 |
Factory Support Mode (Preset Mode, D- |
||
8 |
Component and Button Description |
|
|
SUB/DVI-D/HDMI PC) |
|
8 |
- How to Use the Joystick Button |
27 |
HDMI TIMING |
||
9 |
Moving and Lifting the Monitor |
27 |
Power Indicator |
||
10 |
Installing the Monitor |
|
|
|
|
10 - Assembling the Stand Base |
|
28 |
PROPER POSTURE |
||
11 - Mounting on a Table |
|||||
28 |
Proper posture for using the Monitor. |
||||
11 |
- Tidying Cables |
||||
|
|
|
|||
11- Using the Kensington Lock
12- Installing the Guide Spacer
12 - Installing on the Wall mount plate
14 USING THE MONITOR
14Connecting to a PC
14- D-SUB connection
15- DVI Connection
15- HDMI connection
16Connecting AV Devices
16- HDMI Connection
16Connecting Peripherals
16- Connecting Headphones
Important Precautions 3
IMPORTANT PRECAUTIONS
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.
Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
Do not Open the Display:
yyThere are no user serviceable components inside.
yyThere are Dangerous High Voltages inside, even when the power is OFF. yyContact your dealer if the display is not operating properly.
To Avoid Personal Injury :
yyDo not place the display on a sloping shelf unless properly secured. yyUse only a stand recommended by the manufacturer.
yyDo not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
yyAlways turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house.
yyKeep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages.
yyDo not add accessories that have not been designed for this display.
yyWhen the display is to be left unattended for an extended period of time, unplug it from the wall outlet. yyIn the presence of thunder and lightning, never touch the power cord and signal cable because it can
be very dangerous. It can cause electric shock.
<![endif]>ENGLISH
<![endif]>ENGLISH
4Table of Contents
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard.
Therefore, NEVER:
yyBlock the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. yyPlace the display in a built-in enclosure unless proper ventilation is provided. yyCover the openings with cloth or other material.
yyPlace the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.
Displaying a still image for long time on the monitor may leave persistent image or stain on the monitor screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused by long time usage are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity.
Do not install this product on a wall if it could be exposed to oil or oil mist. yyThis may damage the product and cause it to fall.
Table of Contents 5
On Cleaning
yyUnplug the display before cleaning the face of the display screen.
yyUse a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.
yyWhen cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
yySpray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.
On Repacking
yyDo not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal(Only, LCD Monitor with Hg lamp)
yyThe fluorescent lamp used in this product contains a small amount of mercury. yyDo not dispose of this product with general household waste.
yyDisposal of this product must be carried out in accordance to the regulations of your local authority.
<![endif]>ENGLISH
<![endif]>ENGLISH
6LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ASSEMBLING AND PREPARING 7
ASSEMBLING AND PREPARING
Product Components
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
<![endif]>ENGLISH
|
|
|
|
|
|
HDMI Cable |
|
|
|
|
|
|
|
Book(Owner's Manual) |
Power Cord |
AC-DC Adapter |
||||
|
/ Card |
|
|
|
|
|
Stand Body |
Stand Base |
Stand Screws |
Stand Screws |
|
2EA, P5 x 25 |
2EA, M4 x 20 |
|||
|
|
Cable holder
CAUTION
yyAlways use genuine components to ensure safety and product performance.
yyThe product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
yyNote that the components may look different from those shown here.
yyWithout prior notice, all information and specifications in this manual are subject to change to improve the performance of the product.
yyTo purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product.
yyThe DisplayPort cable may not be available in some areas.
<![endif]>ENGLISH
8ASSEMBLING AND PREPARING
Component and Button Description
Screen
Power indicator yy On: Power on yy Off: Power off
Joystick Button
H/P
DC-IN(19 V 
)
HDMI
IN
DVI-D IN |
D-SUB IN |
NOTE
yy The Joystick Button is located at the bottom of the monitor.
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the Joystick Button or moving it left/right with your finger.
Basic Functions
|
|
Power on |
Press the Joystick Button once with your finger to turn on the moni- |
|
|
tor. |
|
|
|
|
|
|
|
Power off |
Press and hold the Joystick Button once with your finger to turn off |
|
|
the monitor. |
|
|
|
|
|
ASSEMBLING AND PREPARING 9
Moving and Lifting the Monitor |
CAUTION |
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
yy If you use the monitor panel without the stand base, its Joystick Button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the Joystick Button to malfunction.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the Stand Base
1 
2 EA
P5 x 25
Stand Body 
Front
Stand Base
2
CAUTION
yy Illustrations in this document represent typical procedures, so they may look different from the actual product.
yyTo protect the screen from scratches, cover the surface with a soft cloth.
yy Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this way will not be covered by the product warranty.
yy Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand and could result in personal injury.
yy When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
yy If you use the monitor panel without the stand base, its Joystick Button may cause the monitor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the Joystick Button to malfunction.
NOTE
yy Remove the stand before installing the Monitor on a wall mount by performing the stand attachment in reverse.
3
2 EA
M4 x 20
Loading...