LG 32LS662V0ZC, 43US342H0ZC User Guide

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it
for future reference.

*MFL71722302*

(2007-REV00)

www.lg.com

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

Warning! Safety Instructions

ENGLISH_Index

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• Do not place the TV and/or remote control in the following

environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom.

- Near any heat source such as stoves and other devices that produce
heat.

- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the apparatus
(e.g., on shelves above the unit).

- Near flammable objects such as gasoline or candles, or expose the
TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.

• Ventilation

- Install your TV where there is proper ventilation. Do not install in a
confined space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other materials
while unit is plugged in.

• Take care not to touch the ventilation openings. When watching the
TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this
could result in fire or electric shock.

• Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling onto the TV. Otherwise, the TV
may fall over, which may cause serious injury.

• Outdoor Antenna Grounding (Can differ by country):

- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or
where it can come in contact with such power lines or circuits as
death or serious injury can occur.

2

• Grounding (Except for devices which are not grounded.)

- TV with a three-prong grounded AC plug must be connected to a
three-prong grounded AC outlet. Ensure that you connect the earth
ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna during a lightning storm. You
may be electrocuted.

• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and in
extreme cases a fire may break out.

• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.

• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.

• If any of the following occur, unplug the product immediately

and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC
adapter, power cord, or TV).

- If you smell smoke or other odors coming from the TV.

- When lightning storms or when unused for long periods of time.

Even if the TV is turned off by the remote control or power button, AC
power source is still connected to the unit if it is not unplugged.

• Do not use high voltage electrical equipment near the TV (e.g., a bug
zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written
authorisation from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorised modification could void the user’s authority to operate
this product.

• Use only an authorised attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not touch the TV with
wet hands. If the power cord prongs are wet or covered with dust, dry
the power plug completely or wipe dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of the
reach of children.

- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a fire. Batteries should not
be exposed to excessive heat.

• Moving

- When moving, make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more people to carry
larger TVs. Do not press or put stress on the front panel of the TV.
Otherwise, this may result in product damage, fire hazard or injury.

• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.

• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner, any
type of air freshener, insecticide, lubricants, wax (car, industrial),
abrasive, thinner, benzene, alcohol etc., which can damage the
product and/or its panel. Otherwise, this may result in electric
shock or product damage.

ENGLISH_Index

3

Preparing

A

A

A

B

Separate Purchase

ENGLISH_Index

• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.

• The available menus and options may differ from the input source or
product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button, turning
off the device and unplugging the power cord.

• The items supplied with your product may vary depending on the
model.

• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension
cable that supports USB if the USB cable or USB memory stick
does not fit into your TV’s USB port.

B

B

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display or
a connection error may occur. (Recommended HDMI Cable Types)

- Ultra High Speed HDMI®/™ Cable (3 m or less)

* A < 10 mm

* B < 18 mm

Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.

The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.

Magic Remote Control

(Depending on model)

AN-MR18HA

Check whether your TV model supports Bluetooth in the Wireless
Module Specification to verify whether it can be used with the Magic
Remote.

Wall Mounting Bracket

Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.

Model 32LS66*

VESA (A x B) (mm) 200 x 200

Standard screw M6

Number of screws 4

Wall mount bracket

LSW240B
MSW240

4

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that
the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all
cables.

• When holding the TV, the screen should face away from you to avoid
damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV as shown in the
following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive
vibration.

• When transporting the TV, keep the TV upright, never turn the TV on
its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage the screen.

• When handling the TV, be careful not to damage the protruding
buttons.

• Avoid touching the screen at all times, as this may result in
damage to the screen.

• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.

• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches. (Depending on model)

Mounting on a Table

(Depending on model)

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper
ventilation.

10 cm

10 cm

10 cm

(Depending on model)

2 Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)

• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.

• Do not use any unapproved items to ensure the safety and
product life span.

• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer’s warranty.

• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV
may tilt forward after being installed.) Do not use too much
force and over tighten the screws; otherwise screw may be
damaged and not tighten correctly.

10 cm

10 cm

ENGLISH_Index

5

Attaching the TV to a Desk

(Depending on model)

The TV should be attached to a desk so it cannot be pulled in a forward/

ENGLISH_Index

backward direction, potentially causing injury or damaging the product.

A type

4-Screws

(Not supplied with TV)

Using the Kensington security
system

(Depending on model)

The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.

Stand

• Screw: M5 x L (*L: Table depth + 8~10mm)
ex) Table depth: 15mm, Screw: M5 x L25

B type

2-Screws for Stand Fixing,

2-Washers for Stand Fixing,

2-Nuts for Stand Fixing

(Supplied with TV)

Stand

Desk

Desk

(Depending on model)

Securing the TV to a Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

• If there are bolts inserted at the eye-bolts position, remove the
bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the

location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support
the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain additional
accessories from your local dealer.

6

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the T V carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.

10 cm

10 cm

• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse. (Depending
on model)

• For more information of screws and wall mount bracket,
refer to the Separate purchase.

• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as not
to drop.

• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.

• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.

10 cm

10 cm

10 cm

• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of dust
and insects. (Depending on model)

ENGLISH_Index

Stand hole

7

Connections

ENGLISH_Index

Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to
improve the image quality.

• If the image quality is poor with an antenna connected, try to realign
the antenna in the correct direction.

• An antenna cable and converter are not supplied.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75Ω). (Depending on model)

CI module

View the encrypted (pay) services in digital TV mode. (Depending on
model)

• Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can cause
damage to the TV and the PCMCIA card slot.

• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.

HDMI

• Supported HDMI Audio format:
(Depending on model)
DTS (44.1kHz / 48kHz / 88.2kHz / 96kHz),
DTS HD (44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz),
Dolby Digital / Dolby Digital Plus (32kHz / 44.1kHz / 48kHz),
PCM (32kHz / 44.1kHz / 48kHz / 96kHz / 192kHz)

USB

Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.

• Use USB 1 port when connecting a webcam. USB 2 port may not
support some webcam. (Depending on model)

8

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the T V
port.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device to the TV, use the cable supplied with
the gaming device.

• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change the
PC output to another resolution, change the refresh rate to another
rate or adjust the brightness and contrast on the PICTURE menu until
the picture is clear.

• In PC mode, some resolution settings may not work properly
depending on the graphics card.

• When connecting via a wired LAN, it is recommended to use a CAT 7
cable. (Only when port is provided.)

External Speakers

(Depending on model)

EXTERNAL

SPEAKER OUT

STEREO

(8 )

VOLUME

CONTROL

Control port for Speaker out

+

-

RIGHT

LEFT

ENGLISH_Index

or

UP

DOWN

: Depending on model

• Use only with the 3 Pole 3.5mm Stereo Jack.

• Do not connect your headphones or earphones to the port
for connecting an external speaker.

9